List of documents aginst a perticular material

Hi,
Is there any standard report to find out the list of purchase requisition, purchase order, goods reciept no against a perticular material within a period.
kaushik

Hi,
For Purchase requisition - ME5A,
For Purchase order - ME2M, ME2N, ME2L.
For Good receipt - MB51.
Enter MB51, enter movement type 101 and your material and click on execute button.
Regards,
Mahesh Wagh

Similar Messages

Where used list for document ( In material )

I have t code CSD5 which gives me list of document used in BOM, and then by CV04n I can take material wise document.
But If I want to get list of material for which a particular document is attached I donu2019t have any standard T code. Any Idea how to get it?
Appreciated !
Neal

Thanks for reply ,
I knew this option but for this I will have to go to individual DIR ( CV02n) and check it . Is there any report where I can give list of mat ( may be range ) and get list of documents to each material as report ?
Neal

FM to retrieve the list of images associated to a material

Hi Experts,
Is there any FM available to retrieve the list of images associated to a material? Any inputs on this will be appreciated !
Thanks and Regards
Anoop

Hello Anoop
Just go through this document Printing or Downloading Service For Object Attachments to local desktop.
It may help you for this issue <Reward request removed by moderator>
Message was edited by: Vinod Kumar

MI31: Cannot Create Physical Inventory Document for a Certain Material

Dear SAP MM Friends,
Greetings! I am a budding MM functional analyst in our company. I received a call earlier regarding with transaction code MI31 (Selected Data for Physical Inventory Documents w/o Special Stock). The user cannot generate a physical inventory document for a certain material.
The thing is, we no longer have any stock for this material (MMBE). I tried generating physical document again by ticking "Only Materials with Zero Stock" but to no avail.
May I ask what might be the reasons behind? Your prompt response is highly appreciated.
Thank you very much.
Best Regards,
Albert

Hi,
Please check also the existing physical inventory document for material, probably you still have active physical document from previous period.
1. Go to MI22 --> select your plant, storage location or you can also specify your material number --> execute.
2. Check your Physical Document list, at field Status doc. --> if the status is Doc. active, but it is not in your current period, then it could be the problem.
3. Delete the physical inventory doc that you found in step 2 (use tcode MI02 --> physical doc, year --> choose delete button)
4. Try to create new physical document for the material.
hope this help.
rob

Web item : List of documents of an infoprovider

I have problems to display all documents of an infoprovider in a web item "list of documents" of a web template.
I chose as type of data provider : SELECTOR_DATA_PROVIDER and selected an infoprovider but I have the error message :
" The referenced data provider "DP_1" is not a query view
In the Web Application Designer, set parameter DATA_PROVIDER_REF in template TEST_COMMENTAIRE1 for Web item DOCUMENT_LIST_ITEM_1 to a valid data provider of type query view "
And the type "query view" does not respond to my needs because it is too restrictive.
Do you have an idea ?
Thanks
Catherine BELLEC

Hi,
Goto RSA1 --> Metadata repository click Multiprovider , select requried MP and click again .
System would generate a detaild report including report list in next screen.
hope it helps..
regards,
Raju

SharePoint 2013 users only see custom list and document lists that they uniquely created

In my first SharePoint 2013 project, I want to create a view where users can only see their own files that they generated. I think I know how to create this view when the list is associated with the 'Documents; folder. However I have created several custom
lists where I can only see these items when I am on the navigation pane to the right and the unique custom lists are listed under 'recent'.
Let me know if you can answer any of the following questions:
1. When on the main SharePoint website, can lists be displayed in other locations than what I just listed? If so, where would I see these other lists?
2. I would like to include the custom lists that are located in the 'recent' navigation pane as a view that only I can use. This would be based upon userid. If this is possible, how would you combine the lists lists in the same view? If this is not possible,
how would you set a view just for the lists listed under the 'recent' section?
3. The content approval solution under versioning settings of a library to restrict the documents to only ones that the user created (and also Approver rights). Then if they create a new view they still won't see the documents that were not created by
them. What about custom lists that are not in the documents area but are in the 'recent' area? Would this restrict users to see only items that they created?
4. Item level Permissions in advance settings solve this problem for the list in the document area and the custom list in the recent area? If so, how would you setup these values?

As it turns out the, setting Item-Level Permissions in a library is fully supported with PowerShell!
The PowerShell commands for changing this are very simple:
$web = Get-SPWeb http://YourSite/
$list = $web.Lists[“Your Document Library Name”]
$list.ReadSecurity = 2
$list.Update()
$web.Dispose()
Note the 3rd line which is where you determine the value for this setting using the following values:
1 = “Read all items”
2 = “Read items that were created by the user”
If you wish to modify the values for Create and Edit access instead, replace .ReadSecurity with .WriteSecurity with
the following values:
1 = “Create and edit All items”
2 = “Create items and edit items that were created by the user”
4 = “None”
For example:
$web = Get-SPWeb http://YourSite/
$list = $web.Lists[“Your Document Library Name”]
$list.WriteSecurity = 2
$list.Update()
$web.Dispose()
Please 'propose as answer' if it helped you, also 'vote helpful' if you like this reply.

HOW TO FIND LAST DOCUMENT DATE BASED ON MATERIAL NUMBER

Hi,
       I want to know how to find the last document details based on material number.
Is there any Functional modulle or BAPI programe?
i,e, I want know last goods receipt details (MIGO) based on material number.
Can u please anybody tell me.
Thanks,
S.Muthu.
Edited by: Subramaniyan Marimuthu on Jan 2, 2008 9:07 AM

Hello.
Check the BAPI_GOODSMVT_GETITEMS
-example--
Get GRs after a specific date for a specific plant/ storage location and movement types
wa_budats-sign = 'I'.
wa_budats-option = 'GE'.
wa_budats-low = '20071201'.
APPEND wa_budats TO budats.
wa_plants-sign = 'I'.
wa_plants-option = 'EQ'.
wa_plants-low = '1000'.
APPEND wa_plants TO plants.
wa_stlocs-sign = 'I'.
wa_stlocs-option = 'EQ'.
wa_stlocs-low = '0001'.
APPEND wa_stlocs TO stlocs.
wa_mvts-sign = 'I'.
wa_mvts-option = 'EQ'.
wa_mvts-low = '101'.
APPEND wa_mvts TO mvts.
wa_mvts-low = '901'.
APPEND wa_mvts TO mvts.
wa_mvts-low = '123'.
APPEND wa_mvts TO mvts.
CALL FUNCTION 'BAPI_GOODSMVT_GETITEMS'
    TABLES
      plant_ra        = plants
      stge_loc_ra     = stlocs
      move_type_ra    = mvts
      pstng_date_ra   = budats
      goodsmvt_header = header
      goodsmvt_items = item
      return          = return.
Reward if helpful.
Cheers,
George

How to change the price list in document?

Dear All,
Is it possible to change the price list in document (e.g. Sales Order) by program (UI)?
If no, any other way to do so? Thanks!
Regards,
On

Dear Gordon,
It may be Purchase Order or Sales Order. But different target will have different solution?
Regards,
On

How do I create a list of Document workspaces

Hello
I can't find anything on how to create a list of document workspaces in a webpart.
If I have a 100 workspaces I can't have the list sitting in the quick launch bar, so I thought that a web part would be the next best thing on a page.
Could anyone advise?
I'm not a programmer, just a power user.
Thank you.
Mel
Mel

I don't believe there is a way to do this OOB. You can either use SharePoint Designer/ custom code to achieve the same.
Also try the following code from CodePlex to display all sub webs, not sure if you can filter it to display only the Workspaces
http://sharepoint247.codeplex.com/
--Cheers

How to get the list of documents

Hi everyone
Can anyone help me How to get the list of documents residing in a folder of KM repository of SAP Netweaver using a simple java program
Thanks in ADV.
Rupesh Khemka

Hi Rupesh,
I have written the code for you and it works with WebDynpro, no seperate java program is required.
Just try to paste it in your application code and run it.
try{
     // Will check the user athentication for EP
                IWDClientUser wdClientUser = WDClientUser.getCurrentUser();
     IUser sapUser = wdClientUser.getSAPUser();
     com.sapportals.portal.security.usermanagement.IUser ep5User = WPUMFactory.getUserFactory().getEP5User(sapUser);
     ResourceContext context = new ResourceContext(ep5User);
                // The path in which your folder resides
     RID rid1 =RID.getRID("/documents/Public Documents/SCAP/");
     IResourceFactory factory1 = ResourceFactory.getInstance();
     ICollection icollection = (ICollection)factory1.getResource(rid1, context);
     IResourceList resourcelist = icollection.getChildren();
     int size1 = resourcelist.size();
     for(int s=0; s<listOfDocuments.getLength(); s++){
          IResource resource = resourcelist.get(i);
          InputStream input = new InputStream();
          input = resource.getContent().getInputStream();
}catch(Exception e){
     e.getMessage();
Once you get the InputStream everything else is possible....
This will surely help you in reading the documents from KM.
Regards,
Rekha Malavathu

List all documents types in a XML file...

Hi, i want to list all document files that are on the portal and make a XML file with result. I found the Interface Query where i can use "search" method. Is there a way to use the APIs from hyperion, i try to do a servlet and obtain a list of all document type like with NAME, DATE CREATED, TYPE, UUID, DESC, etc.. The list can be order by NAME, DATE, etc... And put the result in a XML file. Is it possible to do this with that Hyperion API, or i spend my time to find the solution with this restricted/limited APIs? And first, is there a documentation for the developpers on what we can do with API's Hyperion? The JavaDoc Hyperion just give a little bit information, nothing consisting!! Thanks in advance for any help : [email protected]!Max

hello
you can rename the wsp with a.rar or a.cab extension and take a look inside
Best regards, Christopher.
Blog |
Mail
Please remember to click "Mark As Answer" if a post solves your problem or
"Vote As Helpful" if it was useful.
Why mark as answer?

Sharepoint 2013 on premises Tags & Notes button in List and Document library is disabled.

Hi,
In My Sharepoint 2013 on premises installation Tags & Notes button in List and Document library ribbon is appearing as greyed out.
I have checked that managed metadata service, User profile services are running. Also have given required permissions to the logged in user.
As I came to know that Tags & Notes feature has been retired in Sharepoint online. Is this happening because of same reason as I have downloaded the Sharepoint 2013 on premises version recently or do I need to change some settings.
Please advice.

Hi Saurav,
pls check below
What version of SharePoint 2010 "SP 2010 Foundation or SP 2010 Server" you need to have SP 2010 server and to have the "User Profile service application".
How do you configure the "User Profile service application" did you add the "Social Tagging Database"
Create, edit, or delete a User Profile service application (SharePoint Server 2010)"
http://technet.microsoft.com/en-us/library/ee721052.aspx
When you access to "Application Management>Manage service applications>User Profile Service Application>Manage User Permissions" validate if the all authenticated users Group have the "use Social Features" checked.
Also validate in Central Administration in Farm Features if you have social tags and notes activated.
http://sharepoint.stackexchange.com/questions/17546/tagging-feature-not-working
https://social.technet.microsoft.com/Forums/office/en-US/c11cda96-091b-4b96-91bc-ccd8000238f4/tags-and-notes-sharepoint-2010-not-visible?forum=sharepointadminprevious
Please remember to click 'Mark as Answer' on the answer if it helps you

"missing part list" releasing process order, but the material there is

Hi dears,
Ive a strange problem.
When im going to release a process order, the system give me a missing part list.
The strange is the material indicated in that list, a component of a phantom, is present in state free in the st. location indicate.
Does anybody know what can be the problem?
Thanks in advance,
Juan

Hi all,
the problem was that the material was present in quantity lower than safety stock.
For this reason, the system give me that advice.
however thanks for the help.
Best regards,
Juan

Exclude QM lot stock for a perticular material and location for PPDS run

Hi Experts,
I would like to exclude QM lot stock for a perticular material and location for PPDS run. I have unchecked stock in quality inspection under productmaster/ Demand / availability stock in APO, but still QM lot is appearing in RRP3 view and considering for PPDS heuristic run.
Can you plesae explain how to exclude QM lot for a PPDS run.
--Kishore

Hi Kishore,
Some companies do not activate the iModel for Inspection Lots and manage the Inspection Lots as Quality Inspection Stock. For example this how it looks an Inspection Lot in RRP3 if you manage the Inpsection Lots as Stock in Quality Inspection:
Because you are using the iModel transferring Inspection Lots as QM Lots, you can not use the Stock in Quality.
You can read about it in the help of the field Inspection Lots in CFM1. This is the help:
Inspection Lots in Integration Model
You use this indicator to activate the transfer to SAP APO of inspection lots
that are relevant to stock.
Dependencies
You can only activate an integration model for inspection lots if you have
set in CIF Customizing that inspection lots should be transferred for materials
relevant to inspection lots instead of qualitiy inspection stock.
If the inspection lots in SAP APO are to contain the characteristic value
assignements of the batches assigned to them, you have to transfer the
characteristic value assignments to SAP APO before activating the integration
model for inspection lots. You can do this by activating an integration model
for stock.
Hope this clairy your doubt.
Kind Regards,
Mariano

Document Object Linking with Material

Dear All,
I have a small query regaridng the object linking between document and material. Whenever i create part in CAD system, i am creating a document and material for the part in the SAP PLM system using the CAD Interface. Then if i log onto the SAP PLM system under document i am able to see the linked material in object links. Where as i am not able to see the document link in the material basic data screen.
Where can i found the document linkage information for the material in material master screens.
regards,
rajesh.

Hi Rajesh,
in transactions MM02 and MM03 you have to go to the "Additional Data" Screen. Please use the button and then switch to the "Document Data" tab. Here you should be able to see the linked document info record.
Best regards,
Christoph
P.S.: Please reward points for usefull informations.

List of documents aginst a perticular material

Similar Messages

Maybe you are looking for