List of GL accounts mapped against Material

Hi
I want the List of Materials mapped against which GL accounts.
Can anybody help me out.
I will assign the points.
Regards
Kshipra G

Hi ,
There is no assignment like material to GL account in standard SAP. Every materials have it is own valuation class based valuation type ( Valuation classes vary for each valuation type). In Customization ,you can assign GL accounts against valuation classes.
First go to MBEW table and enter all material codes and execute where you can get the valuation classes against material codes.
Take that valuation classes and go to T030* Table where you can get the list of GL accounts.Like all BSX means :- Balances sheet inventory posting GL's ,WRX means :- GRIR Accounts.
Rgds
SumaMani

Similar Messages

Accounting Document against material document.

What is the t-code for checking the accounting document for multiple material document in a single view?

Hi
In BKPF Table there is one field called AWKEY which contains Material document number concatenated with year
Refer the secondary index 4 , AWTYP field value will be MKPF
Regards
Amuthan M

Product Category and GL account mapping

Hi
We are using SRM 4.0 with ECS scenario.
Would like to know, whether the Product Category and GL account mapping we do in SPRO is restricts the user to use the same GL account mapped against the product category or it is just a defalut and can it be changed while making PO or SC.
Thanks

Hi
This is standard SAP functionality.
The same GL account mapped against the product category, is just a default and it can be changed while making PO or SC. This is not hardcode as such. We emphasize here that we should follow the same GL account and Material Group combination as determined in R/3, the same combination GL and Product caategory needs to be made in SRM as well. (Since finally the PO will get created in r/3, where all the same validation will take place, at the creation of PO from SRM).
 The table which holds the data for
"Define G/L Account for Prod Cat and A/C Assignment Cat" is BBP_DET_ACCOUNT and it holds data in similar manner.
1. Either using the SPRO path
SPRO-> Account Assignment -> Define G/L Account for Prod Cat and A/C Assignment Categories
2. Or using SM30 transaction for the table - BBP_DET_ACCOUNT table
3. Use BADI - BP_DETERMINE_ACCT -> To change GL accordingly as per your logic.
The SRM G/L account is working on a linkage between product category and account category (cost center, project, asset...) that give you the default G/L account. If this very simple equation does not fit your requirement, you can use badi BBP_DETERMINE_ACCT to implement your own equation.
Hope this will definitely help. Do let me know.
Regards
- Atul

SAP Cloud For Customer : Code List Mapping For Material or Product

Hi Experts,
I wnat some information about the SAP cloud code list mapping.
If i want to replicate Material / Product from SAP ECC / SAP CRM to SAP cloud for customer then any code list mapping entry we need to maintain in cloud side?
Or
Any Code list mapping for Material or Product in Cloud?
If yes anyone have list with SAP ECC / SAP CRM table details?
Many Thanks
Mithun

Hi Mithun,
Code list data type is available in SAP Cloud. As of my knowledge I trying to find is code list mapping is available or not.
Yes we can replicate exactly the same values in SAP Cloud that we see in the SAP ECC / SAP CRM. For this, We need to create custom 'Code list' for the required one you want and assign that code list data type name which you created in the previous step to the required element in the BO.
For creating the code list data type: Go the Solution Explorer, Right Click on the Solution name, Click on 'Add' and Click on "New Item', then Add new item window will open with Installed templates, you will see the list of templates select the code list data type. Give the name as per your requirement starting with Z, max length is 27 only. click next, in 2/3 step, here you can add the list of values you want, add description to them. after clicking on the finish. activate the solution. Go to the BO and for the required element add the name you provided in creating the Custom code list ( ZXxxxxCode ) . Save and activate the BO as well as the solution then update the metadata in the designer part and in date model also, In data model, bind the required root element which is on the left pane to the required BO element which are in the right pane. Click Save and activate here also after the changes are made. finally activate the solution. In the solution explorer Right click on the OIF ui component and click on preview, it will open in the browser, here you will find the custom list you created, for the required one which you added code list date type name for the element in the BO.
Mithun.. Sorry if I"m confusing you more on this. let me know is this solution enough for the requirement you are searching.
Best Regards
Bandhav

Asset issuance against material in MB1A..

Hi:
We have decided to witch our old procedure of capitalizing asset through MIGO. Our AS IS and TO BE processed are
AS-IS Process:
PR--Account assignment category A
PO...For asset procured
MIGO ...capitalizing the asset
TO-BE process:
Open Asset material and its material PR
PO and its MIGO
later issue asset against material in MB1A with movement type 241..My concerns here are that asset materials are opened with indicator V and amount with which asset is capitalized is not the one with which PO was made and MIGO was done for asset material , instead it is MAP of material which system takes while issuing asset against material...We can not open asset material with S indicator since most of out IT based asset's price fluctuates period to period.
Please comment .
Regards
Edited by: Atif Farooq on Oct 27, 2011 12:16 PM

you can try the internal order route
create internal order
procure the materials against the internal order ( PO acct assign,ment F and internal order mandatory)
settle the order against a WIP ( work in progress) asset
create assets by settling the WIP asset against the required assets
MAP issues doesnt bother asset value anymore

WAC - Sudden drop of MAP for material

Hi All
Kindly advice for below issue
I have a material "XXXX"
The moving average price(MAP) for this material in period 04 was $2000 in material master. and there is no qty.
In the period 05 the MAP dropped to 0.02(in the entire month only 3 transactions happned, 2 with movement type 511(Receipt of delivery without charge) for qty 1 each time and one transaction with movt type 512 for one qty.
Now the qty is one with MAP 0.02
Kindly advice
Thanks
Regards
Manju

Dear,
As a rule, against free of charge GR posting for material with MAP,
No accounts are credited or debited when the delivery free of charge is posted, since there is no change in value. The stock quantity of the material increases in the material master record, while the total value remains unchaged u2013 for this the moving average price automatically decreases.
Since you mentioned the MAP for material is 2000 and stock in NIL. Basing on the above you posted 1 quantity as free of charge and for this 1 quantity the MAP 2000 was deducted. As per me there is no problem, you can go ahead with postings. Next time when you receive the same material with charge the price automatically adjusted as required.
Regards,
Syed Hussain.

How do i track account posted against PO created for cost centre

Hi All,
I have created PO with cost Center 'K' without material and i have entered G/L account no as well then i have done GR against PO.
How do i track account posted against PO created for cost center
BR
Govind

hi,
Check the table COSP - Cost centre external postings
also check ..COEP and COBK...
This will help you to see...
IN COSP - See the debit / credit in BEKNZ and ledger - in the field LEDNR...Valuation type - WRTTP...
Hope it helps...
Regards
Priyanka.P

Define Valuation Class against Material Group through SPRO.

Hi,
Can we define Valuation Class against Material Group through SPRO.
Because we don't want to insert valuation class during material master creation. Reason, User can select easily wrong Valuation class during creation of material master and due to this, valuated in wrong GL accounts...
During material creation, valuation class should automatically show in Accounting View.
Pleas guide..

Hi,
For your requirement as you have 10 Material Types and you should have 10 new account category reference &10 new valuation class and link(OMSK)each Material Type with individual valuation class though respective account category reference. Also assign each account category reference in respective material type in OMS2. So when you create material (MM01) with a particular material type, then only assigned valuation class will be defaulted/allowed to enter in accounting -1 view.
In the standard we have some predefined material type, valuation class and account category reference and a link between them has already established by the system. If we are using these standard setting no additional efforts are required. But to meet any specific requirement, if we have to create a new material type or a new valuation classes or a new Account Category Reference (all the three), then we have to establish this links in bewteen.
Regards,
Biju K

Customize Dropdown lists on the Accounts List Accounts page in IDM

Hi All,
There is probably a simple way to do this but haven't had any luck so far.
I want to customize the drop down lists on the Accounts > List Accounts page which provide the options to Create, Update, Enable, Disable, etc. However I'm not sure which object I need to edit to do this.
I thought it was the User Actions Configuration object but I have tried changing values and the drop down stays the same.
Does anyone know the best way to edit the drop down lists? We are using IDM version 7.1.1.8
Thanking you all in advanced.

User List Form > 'buttonrowsearch' property of the 'TreeTable' field. place the 'users' map block before 'orgs' map in the list.
Cheerz

G/L account ,date, wise material stock display

Hi Experts
My requirement is I need to display G/L accounts(mseg-sakto) material stock(mara) present on a particular date (budat)range.
For this in select-options i am taking sakto as mseg-sakto and datum as bsim-budat.
Now i need to apply select query and fetch data according so that i can show my MATERIAL STOCK as per the G/L A/C choosen on particular date range.
i am displaying material stock in a ALV GRID.
Am i correct in choosing tables and fields for my requirement to fullfill?
should i take some other table or field ?
it is a modification to standared mb5b trnx.

Hi,
Try with tables:
SKA1     G/L Account Master (Chart of Accounts)
SKAT     G/L Account Master Record (Chart of Accounts- Description)
SKB1     G/L account master (company code)
BSIS     Accounting- Secondary Index for G/L Accounts
Regards,
Renjith Michael.

Accounting entry against Excise invoice not created for Service Tax sales

Dear all,
I am facing one problem related to accounting entry against excise invoice not created, for service tax sales scenario in SEZ plant.
Accounting entry against billing document is generated,which contains revenue account-Debit entry,service tax 10% --Debit entry,ECS-Service tax 2% --Debit entry, SECess Service Tax 1% --Debit entry & Sundry Debtors (Reco) - Domestic(Customer receivable reconciallation) account-Credit entry.
But after generating excise invoice, accouning entries not generated for clearing of Cenvat suspense entry(i.e.service tax 10% ,ECS-Service tax 2% , SECess Service Tax 1%) which is generated during billing document.
Plz. suggest step by step guideline to resolve this issue.
Thanks & Regards,
Mukesh Pardeshi

Hi ReazuddinMD,
thanks for your reply and support...I checked all the entries/accounts maintained correct.. but the Accounting entrys against Excise invoice not created..
Now i am geeting error as below at the time of saving Excise invoice,
No account is specified in item 0000000001
Message no. F5670
Diagnosis
No account was specified for account type "S" in item "0000000001" of the FI/CO document.
System Response
The Financial Accounting program cannot process the document.
Procedure
A system error has probably occurred in the application you called up. Check the data transferred to item "0000000001" of the FI/CO document.

Sharing the same account mapping in 2 different locations

I am using FDM (version 11.1.1.3 and 11.1.2.1).
Hi Expert,
I would like to ask about sharing the same mapping in multiple locations. Currently, I have 3 (or more later) locations in FDM. I have a set of account mapping which I would like to maintain it as a master copy and apply this account mapping to all 3 of my locations in FDM. I figured that I need to upload the account mapping everytime switching between locations.
I know that for logic group, I can assign the same logic group to multiple locations by updating the properties in "Locations" under "MetaData".
Is it possible to do the same thing for account mapping? e.g. upload only 1 set of account mapping and assign multiple location to it?
Thank you!

Choose one of the locations and assign it as the Parent location for the other 2 locations on the Locations metadata screen. These locations will then share the mapping of the parent location and you only need to maintain the mappings in the parent location.

I need to run a map against a particular dataset - how can i do it in OWB

Hello again :)
I need to run a map against table on a particular dataset (WHERE clause) - how can i do it in OWB?
The map is loading data from table A into table B (doing all sorts of wierd and wonderful things in between). Now table A had more (a lot more) data added which i have to load into table B.
How can i modify my map so that it only runs agains this newly added data (normally i would do a where clause).
i cannot find how to do it in OWB :(
The map i am runnig is fairy complex so i didn't really want have to create another table/view of the data i need then remap in all etc.
Any ideas would be greatly appreciated.
thank you very much
Kind Regards
Vix

Hello AP
Well that is the thing - records are constantly added to table A all the time and then undergo tramsformations and loaded into table B. What i want to do is somehow indicate in the the map to only run agains records that have beed added (colmn2 = 'value').
At the moment i created a view for the desired dataset (colm2 = 'value') and remapped everything. But it is a bit of a pain:
1) there are a lot of functions and each takes a number of columns (i have some functions taking up to 6 diff columns)
2) i have data loaded to table A all the time and i need to then transform and load it to table B. so i try to aviod doing the whole re-mapping thing all the time.
In TOAD it would be a simple statment 'where colm2 = 'value' and all my functions will be run agains those records that satisfy the condition. How can i do it in OWB?
If i use filter - i would have to use 'mid' table where filtered records will be loaded and from that use 'mid' table as table A in the map. does this make sense?
the main disadvantage is the performance - moving data from one table to 'mid' table etc.
I tried using conditional load filter and it still doesn't do what i want.
After trying diff options i decided to ask people here about it. The only thing i have left to try is to ask Oracle support. I am sure it would be a 'user knowledge' as i am sure this functionality exist i just can't find any references to it.
Thank you very much for all your help. In fact this forum helped me a lot with a number of other issues :)
i just feel like a lemon coz it is very simple thing and i can't find how to do it...
Kind Regards

Transaction MB5B takes not into account the archived material documents

Transaction MB5B takes not into account the archived material documents . Is it possible?

Hi
It is not possible to see the archieved materials. Once archieved it will remove from the registry. Cannot be retrieve back.
Thanks
Ganesh

Creation of outbound delivery against Material Document

Dear All,
Is it possible to create outbound delivery against material document.
Material document is created with MB1B.
I have the material document number only
Thanks in advance.
Sumeet

Hi,
Please check the below links
http://help.sap.com/bp_bblibrary/500/html/W41_EN_DE.htm
http://help.sap.com/bp_cpwsd604/BBLibrary/HTML/298_EN_CO.htm
Kuber

List of GL accounts mapped against Material

Similar Messages

Maybe you are looking for