List of Highlighted phrases (in Bookmarks) doesn't match highlight.
The problem is with the list of Bookmarks (that also includes my list of highlights and notes).
If I highlight a word or phrase within a sentence what I highlight is not guaranteed to display in the list unless what I've highlighted is the first sentence in a paragraph. For instance, below is a sample paragraph from Nassim Nicholas Taleb's "The Black Swan: Second Edition":
"Silent evidence pervades everything connected to the notion of history. By history, I don't just mean those learned-but-dull books in the history section (with Renaissance paintings on their cover to attract buyers). History, I will repeat, is any succession of events seen with the effect of posteriority."
In this example I highlighted the last sentence, "History, I will repeat, is any succession of events seen with the effect of posteriority." But what is displayed in the list of Bookmarks is "By history, I don't just mean those learned-but-dull books in the history section (with Renaissance pai...".
As you can see in the example above, what is listed does not match the phrase I highlighted, making it difficult to use the list to find a particular highlight. And that's the point I'm making - the list of highlights, in my opinion, is built to provide quick access to areas of the book I want to return to. But if the list doesn't match or contain what I've highlighted I can't recognize the passage I'm looking for.
I've tried this with several books in the iBook app and all of them exhibit the same behavior.
Never mind my question. For those of you who have the same problem, you need to change the rule to 'Playlist is Music', so it still selects songs from the whole library in itunes. The rule 'Media kine is Music' seems to tell iphone to pick music on the device into this smart playlist, that is what I understand.
Similar Messages
-
Scrolling with trackpad in bookmarks doesn't work
As per the title.
Scrolling within a list of bookmarks doesn't work. Scrolling in a drop down menu doesn't work either. Has anyone experienced the same and found a solution?
Scrolling works fine on pages in Firefox but not within bookmarks.
Scrolling through bookmarks in IE9 works fine.
I have the Flash/Youtube issue too but I'm guessing its not related.
Thanks.Same problem here on two different HP laptops. I really hope Mozilla can fix this problem, maybe in collaboration with HP. It must have something to do with HP's hardware customization. HP do their stuff their way and customers suffer. I've had no such problem on any other laptop and they were all using Synaptics touchpads.
I have lots of Bookmarks and it is really annoying to wait for them to scroll automatically with the cursor placed over the little arrow bar at the bottom of Bookmarks dropdown list. If you use an external mouse, you can scroll through Bookmarks with it just fine, so the problem is with the touchpad. -
Are all Intel 24" iMacs w/Snow Leopard OK for Mountain Lion? My serial number doesn't match any of the one in the iMac ID list; they all start with "MA" or "MB" and mine starts with a "W." Purchased direct from Apple August 2007.
Macs that can be upgraded to OS X Mountain Lion
iMac (Mid 2007 or newer)
MacBook (Late 2008 Aluminum, or Early 2009 or newer)
MacBook Pro (Mid/Late 2007 or newer)
MacBook Air (Late 2008 or newer)
Mac mini (Early 2009 or newer)
Mac Pro (Early 2008 or newer)
Xserve (Early 2009)
Open System Profiler and report what you find displayed for the Model Identifier. -
Bookmarks doesn't work everytime there is a firefox update.
Bookmarks doesn't work everytime there is a firefox update. Its a recurring problem
The most recent update is to firefox 3.6.8.
== Operating system ==
vistaSee http://kb.mozillazine.org/Locked_or_damaged_places.sqlite
-
I have two problems when I create my first iWeb blog:
1. The rss feed of the blog doesn/t work in the browser:
I publish my iWeb site in a folder. Therefor I choose the folder and that same window I type in the url of the website. When the blog is shown in firefox or safari I can bookmark the rss. The browser rss bookmark shows the blog entry correctly, but when the blog is updated with more entries they will not be shown.
The rss bookmark doesn't display the updated entries. What am I doing wrong? Or do I have to refer to a special rss file (which one?), and not to the folder which includes the site, so that the feed shows the new entries correctly.
the other problem is the following:
2. The browser shows the headline colour for the blog entries always black. But iWeb shows them in orange, and that's the colour I want for this headlines. Where
is the colour gone? Why is it not the same color than it is in iWeb?
Anyone knows how to solve this?Hi Brad,
I use Netweaver 04, SAP_BW with release:350 and support package: SAPKW35010
I believe that my problem is the additional html-code that sap server creates when using use_page_wrapper='x'.
Regards
Jürgen -
ADOBE READER doesn't respond (Highlighting Tool)
I like making use of the highlighting tool in a pdf that can be highlighted and I like to change the colors as I would if I were using this as a book to help me study.
When I highlight and click properties to change the color....I go through a lengthy process where first ADOBE READER doesn't respond.
Then to add to my 4-7 minute wait the entire screen turns a faded white and I see that blue circle rotating around as a cursor.
When the program decides to advance it leads me to "Highlight Properties" window which sometimes works but as of lately doesn't.
This entire process is very painful. To a Dad who likes watching UFC and ACTION/VOLENT MOVIES, the pain is comparable to watching "My Little Pony" or "One Direction" videos or being forced to watch a "chick flick marathon" on Father's Day! No offense to any of those who may partake in that sort of thing.
Can someone please help me before I take this program out of machine for a replacement?
-HULK
I could upload a video of the problem but I am doubtful anyone would watch it due to the severity of this issue.Greetings, frustrated Dad,
Having just read your inquiry (I don't work for Adobe, but have used Reader and several other products) by any chance is the document you're trying to work with one that was created as a PDF from a scanned document? If what you're currently looking at was created from a scanned document, then Adobe can't "read it" in that format, as it views it as though it were an "image". Get it? And it can't highlight images, as it doesn't recognize the text. (If this isn't the case, sorry, but I can't help. I purchased a program called Nitro Pro, rather than purchasing Adobe Acrobat, and it lets me create and edit PDF's. You might want to have a look at it.) I logged on here today to view a document I'd uploaded some time ago (prior to purchasing the 3rd party PDF program and just happened to see your question. I was trying to use this online version to convert a scanned document into a Word document, as long as I was here, but it appears that THIS site along with its features, are very limited. I can store PDF's that are already created, but without purchasing, not much more can be done, other than adding text to an already PDF, or highlighting, which you've had problems with.) Don't know what browser you're using, but in Chrome, they have free extensions, including highlighters, that will let you do what you're asking about on any web page. You just download the browser extension through Google Play Store, and go to it.
Ciao,
Mambo -
Why doesn't firefox highlight webpages already visited
why doesn't firefox highlight webpages already visited
Make sure that you not run Firefox in (permanent) [[Private Browsing]] mode
* You enter Private Browsing mode if you select: Tools > Options > Privacy > History: Firefox will: "Never Remember History"
* To see all History and Cookie settings, choose: Tools > Options > Privacy, choose the setting <b>Firefox will: Use custom settings for history</b>
* Uncheck: [ ] "Automatically start Firefox in a private browsing session"
You can look at these prefs on the about:config page.
*http://kb.mozillazine.org/browser.history_expire_days (180) (also affects saved form data)
*http://kb.mozillazine.org/browser.history_expire_days_min (90)
*http://kb.mozillazine.org/about%3Aconfig
There are other things that need attention:
Your above posted system details show outdated plugin(s) with known security and stability risks that you should update.
*Next Generation Java Plug-in 1.6.0_16 for Mozilla browsers
Update the [[Java]] plugin to the latest version.
*http://www.oracle.com/technetwork/java/javase/downloads/index.html (Java Platform: Download JRE) -
Error: The decapsulated inner packet doesn't match the negotiated policy in the SA
I upgraded my ASA from 8.2(1) to 8.4(3) as I wanted to try to get Android devices to properly connect via VPN.
After some effort, I was able to get the Android devices to connect via VPN. However, my syslog server has a number of errors recorded that look this this:
%ASA-4-402116: IPSEC: Received an ESP packet (SPI= 0x1E76EFA6, sequence number= 0x1F0) from x.x.x.x (user= testuser) to y.y.y.y. The decapsulated inner packet doesn't match the negotiated policy in the SA. The packet specifies its destination as z.z.z.z, its source as a.a.a.a, and its protocol as tcp. The SA specifies its local proxy as y.y.y.y/255.255.255.255/udp/42246 and its remote_proxy as x.x.x.x/255.255.255.255/udp/0.
Digging further, it seems this error might be due to a NAT issues with the VPN connections. VPN previously worked with Cisco's VPN client on Windows, though I did not test to see if that is no longer working. However, I made no changes in the config, except for those related to additions needed to support L2TP. With the below config, Android clients can connect to the ASA and access the internal network, but they cannot connect to external addresses. I'm at a loss.
The addresses used in the config: 192.168.1.0/24 are on the internal LAN and 192.168.3.0/24 are addresses assigned to VPN clients.
I noted in the config this line:
access-list inside_nat0_outbound extended permit ip any 192.168.3.0 255.255.255.0
The access list is not referenced anywhere, though it was referenced in the 8.2(1) config like this:
nat (inside) 0 access-list inside_nat0_outbound
I'm not sure what else changed, but I've looked over the config and I just cannot see what the issue might be. I'm hoping somebody might be able to point out my error.
Here's the config file (at least the parts that might be of interest):
: Saved
ASA Version 8.4(3)
interface Vlan1
nameif inside
security-level 100
ip address 192.168.1.1 255.255.255.0
interface Vlan2
nameif outside
security-level 0
ip address dhcp setroute
boot system disk0:/asa843-k8.bin
object network obj-192.168.3.0
subnet 192.168.3.0 255.255.255.0
object network obj_any
subnet 0.0.0.0 0.0.0.0
access-list outside_access_in extended permit icmp any interface outside time-exceeded
access-list outside_access_in extended permit icmp any interface outside echo-reply
access-list outside_access_in extended permit icmp any interface outside unreachable
access-list outside_mpc extended permit ip any interface outside
access-list inside_mpc extended permit ip 192.168.1.0 255.255.255.0 any
access-list testVPN_splitTunnelAcl extended permit ip 192.168.1.0 255.255.255.0 any
access-list inside_nat0_outbound extended permit ip any 192.168.3.0 255.255.255.0
ip local pool VPN-Pool-1 192.168.3.1-192.168.3.254 mask 255.255.255.0
ip verify reverse-path interface outside
nat (inside,any) source static any any destination static obj-192.168.3.0 obj-192.168.3.0 no-proxy-arp
object network obj-192.168.3.0
nat (outside,outside) dynamic interface
object network obj_any
nat (inside,outside) dynamic interface
access-group outside_access_in in interface outside
crypto ipsec ikev1 transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-DES-SHA esp-des esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-DES-MD5 esp-des esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-AES-128-SHA-TRANSP esp-aes esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-128-SHA-TRANSP mode transport
crypto ipsec ikev1 transform-set ESP-3DES-SHA-TRANSP esp-des esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-3DES-SHA-TRANSP mode transport
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 10 set ikev1 transform-set ESP-AES-128-SHA-TRANSP ESP-3DES-SHA-TRANSP
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set pfs
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5
crypto map outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
crypto map outside_map interface outside
crypto ikev1 enable outside
crypto ikev1 policy 5
authentication pre-share
encryption aes
hash sha
group 2
lifetime 86400
crypto ikev1 policy 10
authentication pre-share
encryption aes-256
hash sha
group 2
lifetime 86400
group-policy testVPN internal
group-policy testVPN attributes
wins-server value 192.168.1.8
dns-server value 192.168.1.8 192.168.1.4
vpn-idle-timeout none
vpn-tunnel-protocol ikev1
split-tunnel-policy tunnelspecified
split-tunnel-network-list value testVPN_splitTunnelAcl
default-domain value test.us
group-policy testVPNnsl2tp internal
group-policy testVPNnsl2tp attributes
wins-server value 192.168.1.8
dns-server value 192.168.1.8 192.168.1.4
vpn-idle-timeout none
vpn-tunnel-protocol l2tp-ipsec
group-policy testVPNns internal
group-policy testVPNns attributes
wins-server value 192.168.1.8
dns-server value 192.168.1.8 192.168.1.4
vpn-idle-timeout none
vpn-tunnel-protocol ikev1
username testuser password PASSWORD encrypted privilege 15
username testuser2 password PASSWORD nt-encrypted privilege 15
tunnel-group DefaultRAGroup general-attributes
address-pool VPN-Pool-1
default-group-policy testVPNnsl2tp
tunnel-group DefaultRAGroup ipsec-attributes
ikev1 pre-shared-key *****
tunnel-group DefaultRAGroup ppp-attributes
authentication ms-chap-v2
tunnel-group testVPN type remote-access
tunnel-group testVPN general-attributes
address-pool VPN-Pool-1
default-group-policy testVPN
tunnel-group testVPN ipsec-attributes
ikev1 pre-shared-key *****
tunnel-group testVPNns type remote-access
tunnel-group testVPNns general-attributes
address-pool VPN-Pool-1
default-group-policy testVPNns
tunnel-group testVPNns ipsec-attributes
ikev1 pre-shared-key *****
tunnel-group testVPNnsl2tp type remote-access
tunnel-group testVPNnsl2tp general-attributes
address-pool VPN-Pool-1
default-group-policy testVPNnsl2tp
tunnel-group testVPNnsl2tp ipsec-attributes
ikev1 pre-shared-key *****
tunnel-group testVPNnsl2tp ppp-attributes
authentication ms-chap-v2
One last question: in order to get the connection from Android to work, I was forced to use "tunnel-group DefaultRAGroup". Is that actually a limitation, or did I make an error that forced that requirement? I wanted to use "tunnel-group testVPNnsl2tp".
Thanks!Chris,
This is still a bit off the mark. I think I might be confusing the issue by including some of the VPN configuration that I had previously installed and working (e.g., two other VPN tunnel groups with split tunneling on one of them). Let's just remove that stuff from consideration. I actually tested the current configs just to see if they are working since the upgrade. testVPN is working with the split tunneling, but testVPNns (no-split tunneling) does not allow external access. I guess there is a NAT config issue there, too, but not sure what it is, yet. I've not investigated that closely.
I want to solve one problem at a time, though I understand there are some interdependencies.
What I'd like to focus on right now is just the L2TP VPN connection.
From what I've been able to understand from the documentation, what I need are these lines:
crypto ipsec ikev1 transform-set ESP-AES-128-SHA-TRANSP esp-aes esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-128-SHA-TRANSP mode transport
crypto ipsec ikev1 transform-set ESP-3DES-SHA-TRANSP esp-des esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-3DES-SHA-TRANSP mode transport
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 10 set ikev1 transform-set ESP-AES-128-SHA-TRANSP ESP-3DES-SHA-TRANSP
crypto map outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
crypto map outside_map interface outside
crypto ikev1 enable outside
group-policy testVPNnsl2tp internal
group-policy testVPNnsl2tp attributes
wins-server value 192.168.1.8
dns-server value 192.168.1.8 192.168.1.4
vpn-idle-timeout none
vpn-tunnel-protocol l2tp-ipsec
tunnel-group DefaultRAGroup general-attributes
address-pool VPN-Pool-1
default-group-policy testVPNnsl2tp
tunnel-group DefaultRAGroup ipsec-attributes
ikev1 pre-shared-key P74bmqL6rT40bl5
tunnel-group DefaultRAGroup ppp-attributes
authentication ms-chap-v2
crypto ikev1 policy 5
authentication pre-share
encryption aes
hash sha
group 2
lifetime 86400
I still want to assign the IP addresses to VPN clients out of 192.168.3.0/24.
The tricky part is understanding exactly what NAT rules to insert and to avoid that error message I'm getting relatred to the encapsulated packets. I tried to introduce the commands you had, but it's missing stuff that I would need for L2TP/IPSec (e.g., "mode transport"). I also don't think I want "pfs group5". The above config "works" in that I get connected -- all negotiation is done. It's just that packets from the VPN client are not able to go out to the Internet and I'm seeing that encapsulation error messages when I try to send a packet.
Paul -
My coverflow art doesn't match my video viewer. In my computer iTune>album artwork, I have two folders- download & local. They look close but are not the same. I think that is my problem, so which one of the folders do I use to overwrite the other?
ThanksDoes this happen in iTunes, on the iPod, one or the other, or both?
If the album art is correct in iTunes, try the steps listed here...
btabz: My songs have artwork in iTunes, but it won't transfer to my iPod!
Note: The above tip was written for iTunes for windows. Some of the instructions may be incorrect on Mac OS X. For example, to access preferences in iTunes, go to iTunes-->preferences, not edit-->preferences.
btabz -
Sometimes the artwork displayed doesn't match the track being played ... any clues as to fax or as to a why?
ThanksDoes this happen in iTunes, on the iPod, one or the other, or both?
If the album art is correct in iTunes, try the steps listed here...
btabz: My songs have artwork in iTunes, but it won't transfer to my iPod!
Note: The above tip was written for iTunes for windows. Some of the instructions may be incorrect on Mac OS X. For example, to access preferences in iTunes, go to iTunes-->preferences, not edit-->preferences.
btabz -
Get playcount and ratings from ipod when pc library doesn't match ipod
After updating iTunes, the library on my PC was erased.
So I imported an exportfile 15 months old to the new library and added all songs in my "recently added" (of past 15 mths) on my iPod.
So far so good.
The problem is that this new library doesn't match the one on my iPod, though they are the same. The only difference: all ratings and stats that are on my iPod but aren't on my PC.
Is there any way to get the "library identifier" on my PC and iPod to match again, so my stats and ratings are updated to my PC?
Cheers,Which model of iPod do you have? I have a 160GB Classic (this forum) which _does not_ show Podcasts under the Music folder, and apparently does not have an option to do so. However, I also have a 5th generation 30GB video iPod, which does show Podcasts under the Music folder. Straight away, you'll notice that different modles behave differently, so we need to know.
So, that's the first thing to sort out.
Then, on your manual recordings, did you add all the relevant artist information to the file (i.e. the MP3 tags) when you created them? If not, that will be why they only show up in songs, (but there may be another cause too!). You can fill in any missing information by highlighting the song and clicking on *File/Get Info* and adding the info then.
In the long term, the probably answer to your manual files is to give them their own genre and then search for them that way. -
At the end of the part 2 tutorial, this was the code:
@charset "utf-8";
/* CSS Document */
#container {
width: 968px;
background: #FFF;
margin: 0 auto;
padding-left: 10px;
padding-right: 10px;
overflow: hidden;
}#main_image {
background-image: url(images/main.jpg);
background-repeat: no-repeat;
#container #main_image {
height: 376px;
width: 968px;
#left_column, #center_column, #right_column {
width: 316px;
float: left;
#center_column, #right_column {
margin-left: 10px;
The part 3 tutorial instructed this:
Copy the <script> tags from the Edge Web Fonts site, and paste them into the <head> section of index.html in Dreamweaver just above the <link> that attaches the style sheet like this:
<head>
<meta charset="utf-8">
<title>Check Magazine</title>
<script src="http://use.edgefonts.net/sarina.js"></script>
<link href="styles/check_cs6.css" rel="stylesheet" type="text/css">
</head>
As you can see from the code at the end of part two (listed at the top), there is no reference to <head> anywhere in the code; therefore, I am uncertain as to where to insert these code instructions.I assume that the embedded tags are in the index document, not the styles type document? I appreciate the information, but I don't see how it relates to my question. Maybe your answer was just over my head? My original question was: If the instructions say this:
Copy the paste them into the section of index.html in
Dreamweaver just above the that attaches the style
sheet like this:
and there the word does not appear anywhere on the index file that I can see it (whether it's embedded or otherwise), where do I insert the code?
Date: Fri, 8 Feb 2013 10:29:29 -0800
From: [email protected]
To: [email protected]
Subject: The pt 3 tutorial code doesn't match the pt 2 tutorial code. Nowhere to insert <head> in pt 2 code.
Re: The pt 3 tutorial code doesn't match the pt 2 tutorial code. Nowhere to insert in pt 2 code.
created by Nancy O. in Dreamweaver - View the full discussion
The pair of and tags are an integral part of any HTML document. When you create a new page in DW, it automatically creates the core HTML tags for you, so in that regard, there's nothing for you to add except content and styles. Embedded CSS styles are inserted inside the document's tags like so: body #LeftSideBar #RightSideBar #MiddleContent
External CSS is a separate physical file to which all your HTML pages are linked. Similar to above, links to external style sheets go inside the tags like this:
HTML & CSS Tutorials - http://www.html.net/http://w3schools.com/ Nancy O.
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5058678#5058678
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5058678#5058678
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5058678#5058678. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Dreamweaver by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746. -
Bounding Box Doesn't Match Object (Illustrator CS4)
I'm not sure if this is an error on my part or a bug, but for the last week or so, the bounding box for my objects hasn't actually matched the objects. This is really problematic when I try to transform the object using the bounding box handles.
On occasion, after I transform the object the bounding box will match it again and will transform correctly. Sometimes it will stay off. If it does reorient itself, undoing the transformations back the original size will cause the bounding box to reset back to it's mismatched state.
Things I have tried to resolve the issue:
Reset the Bounding Box
Copying and pasting the shape to a different document
Starting a new document from scratch (I thought it was possible I corrupted the file)
Return Keyboard Shortcuts to the Default
Restarting Illustrator
Restarting my System
To my knowledge, my system hasn't been updated in the last week nor has anything new been installed. However, IT does push out maintenance so there is a possibiltiy that it was updated and I don't know about it. The only programs open while working in Illustrator are Bridge, Outlook 2007, IE8, Explorer, InDesign CS4, Word 2007, Photoshop CS4, Acrobat Professional 9, Dreamweaver CS4, PowerPoint 2007, Previewer and possibly FireFox 3.something (though not necessarily all at once - generally about 7 of the above listed). My system runs XP Professional SP3 with an Intel Core2 Quad @ 2.66GHz and 3.25 GB of RAM. The objects are not grouped, do not contain clipping masks, do not contain transparency masks and are not compound paths. They are simple paths/shapes, often rectangles.
I have included some pictures to better explain my issue. This first image indicates how the bounding box doesn't match the rectangle.
The second image shows the process of transforming the shape via dragging.
The third image shows the result.
Thanks for any help you can provide!Mr. Bugge:
Thank you for your response and I apologize for the delay in mine. I couldn't try all of the fixes immediately because I had to complete some job duties before I could tinker with this issue.
Things that did not work:
Closing Firefox
Clearing the Preferences
Moving the Preferences Folder
Deleting Temp Files
Closing Other Adobe Programs (Including Bridge Running in the Background
Things I cannot do for various reasons:
Re-installing Acrobat
Turning Off the Firewall (My Company Only Uses 1 Anyway)
Things I haven't tried yet but hope to try later:
Update Printer Definition or Change Default Printer
Check for Corrupt Fonts
Clear My Font Cache
Things I learned:
The issue is most easily recreated by transforming an object to a smaller object. However, zooming in will realign the bounding box but it will only stay aligned when zoomed in. I find it very curious.
Even if I don't end up finding an answer, I do appreciate your time and help. -
I somehow managed to transfer some files from WORD on my PC to PAGES. I now want to delete them from the iPad but what I am seeing on screen doesn't match what the instructions say. In particular, the reference to APPS pane being in iTunes doesn't appear to match ( the sync procedure seems to have gone through its 4 stages OK) and I can't find reference to FILES. Can anyone help please.
IanCan you delete them in Pages on your iPad?
Start Pages and go to the screen with thumbnails of all your documents. Tap on edit. Select the documents you want to delete then tap Delete.
If the documents are in the iTunes File Sharing area on your computer start iTunes on your computer. Use the View Menu in iTunes to View Sidebar.
Connect your iPad and select your iPad in the left sidebar of iTunes on your computer.
Select Apps in the right window.
Scroll down under Apps to find the File Sharing section. It is below the first list of Apps.
Find the Pages app there and delete the documents. -
WRT54G MAC doesn't match sticker
I recently bought this wireless router, & was recording information today. I noticed that the MAC listed on the sticker on the bottom of the router doesn't match the MAC listed in the "Status" section of the web interface. Which is the MAC that I should record as the correct one for the router? & could I have possibly made an input error that could have brought about this change?
(I am not using the "MAC clone" option. I have it as "Disabled".)
Message Edited by Skull6 on 03-24-2008 08:13 PMThe firmware should show the correct MAC address for the router.
Your router has two MAC addresses, one for the WAN port, and one for the wireless LAN. Usually these MAC addresses are the same except for a difference of 1. For example, one MAC address might end in 7, and the other end in 8.
If you clone a MAC address, and then set the "clone MAC address" back to "disabled", I am not certain whether or not this returns your MAC address to its original value. If the MAC address of your router matches your computer, then simply reset the router to factory defaults to get back the original MAC address.
Message Edited by toomanydonuts on 03-25-2008 04:34 AM
Maybe you are looking for
-
I don't get this clipboard thing! I have created two files, one for the MS with mark-ups, and one for the unmarred version, each living in their own spot in my "house." It seems to be merging the two versions and I have to go in and re-paste and then
-
Dsp:select issue in setting catalogId in items of CartModifierFormHandler
I am using the dsp:select as below: <dsp:select bean="CartModifierFormHandler.items[0].catalogRefId"> <dsp:option value="sku90001" /> <dsp:option value="sku87960" /> </dsp:select> But i am getting null pointer exception when the page is getting loade
-
I am updating my Mac to OSX Mavericks. When I launch the download I get an error instead. In French I get "Une erreur est survenue" in red, and then I get an alert "Echec du Téléchargement de OSX Mavericks", download failure. What can I do (it is fu
-
[RECURRING BUG] Update will always fail when trigg...
Hi, Since I have installed PC Suite last year, the same old bug re-appears each time a new release is made available. The scenario is invariable 1. I launch PC Suite and it tells me there's a new version available. 2. I acknowledge and accept the dow
-
Applications menu empty after mmc change
Hi I own a 6300 (latest firmware) when it comes out of the package, the phones got the "Games" and "Collection" folders on an 128 MB memory card. 128 MB stink so I got myself another one. I copied the games and applications with the pc suite to the p