List of hotfix for Hyper V
Hello,
We have environment of Hyper V 2008 R2 Sp1, Hyper V 2012 & Hyper V 2012 R2. I need to know if there is any site where MS publish list of recommended hotfix for these product and the list is regularly updated.
Thanks
Fakhrudin
would be easier to use only one Version right ? so you would have all sexy 2012R2 Features on the complete Environment.
in case you do not have 2012R2 License for all you can use the free Hyper-V Server 2012R2 Version
2008R2 Hotfixes for Cluster and Hyper-V
http://support.microsoft.com/kb/2545685/de
2012 Hotfixes for Cluster and Hyper-V
http://support.microsoft.com/kb/2784261/en-us
2012R2 Hotfixes for Cluster and Hyper-V
http://support.microsoft.com/kb/2920151/en-us
or type "recommended hotfixes and updates for ..." on your favorit search ... :-)
Similar Messages
-
Symantec Antivirus Best Practice for Hyper-v 2012 R2 Cluster
Hi Team ,
I am Working with Hyper-v 2012 R2 Cluster with 5 Node . All are working fine .
Now i am Planning to install Antivirus Symantec in to each node. Please let me know if there is any Best practice guide to install Symantec Antivirus for Hyper-v 2012 R2 Cluster node.
I am using full version of Windows 2012 R2 with hyper-v.
Thanks
Ravi
RaviI would also look strongly at no antivirus as well, but if you do, here are the recommended exclusions and possible issues with Anti-Virus to look out for.
Look for the Hyper-V section:
http://social.technet.microsoft.com/wiki/contents/articles/953.microsoft-anti-virus-exclusion-list.aspx
Big things to stay away from from a VM level too:
1. Do not have a set time when all VMs will kick off a scheduled full disk scan. This can create an I/O storm on your hosts as well as saturate the CPUs as well. Look for products or settings that allow for randomization of full disk scans on
the VMs or do not do full disk scans and only keep the real time scanners active on the VMs for incoming writes.
2. Watch for Antivirus products that update all the VMs at the same time. Again, sometimes you can randomize or exclude a scheduled full disk scan, but sometimes an automated update that kicks off say at 12am can then automatically kick off a
mini scan. This can also create disk I/O and CPU storms.
The problem that still exists with many Antivirus products today is that they try to scan as fast as they can and then get out of the way. This works ok for endpoint desktops or laptops, but when you have 50 or more VMs on a host all ramping up trying
to get done as quick as they can, then this can cause some issues.
Rob McShinsky (www.VirtuallyAware.com)
VirtuallyAware - Experiences in a Virtual World (Microsoft MVP - Virtual Machine) -
HotFixes for autocomplete popup location
Hi ,
As you all know the popup location is appearing outside the grid panel when u place ajax autocomplete ajax component inside grid panel/ table / group panel .
i wonder when the hotfixes for this will be ready or is there any workaround?
Thanks.yea.
i think that is the problem.
i have a autocomplete textfield under groupPanel and this groupPanel is located under gridPanel
and the resultiing popup list is located outside the panel itself.
Thanks.
Can u refer me to the bug URL?
is there any workaround for this?
Thanks -
Hotfix for server 2012 as similar to server 2008 - KB 2135160
Is there any hotfix available as similar to server 2008 - KB 2135160 same required for HyperV
2012We are implementing EMC networker backup on HyperV 2012. When backup stat the server stop randomly.
Based on the event logged on server after log check the following was found :
The computer has rebooted from a bugcheck. The bugcheck was: 0x0000009e (0xfffffa80622fe900, 0x000000000000003c, 0x0000000000000000, 0x0000000000000000). A dump was saved in: C:\Windows\MEMORY.DMP. Report Id: 052814-26676-01.
During further analysis of the dumps:
16: kd> .bugcheck
Bugcheck code 0000009E
Arguments fffffa80`62361780 00000000`0000003c 00000000`00000000 00000000`00000000
16: kd> !process fffffa8062361780
GetPointerFromAddress: unable to read from fffff801521cf000
PROCESS fffffa8062361780
SessionId: none Cid: 0c74 Peb: 7f615f18000 ParentCid: 0454
DirBase: 103c70000 ObjectTable: fffff8a001d2f040 HandleCount: <Data Not Accessible>
clussvc.exe
VadRoot fffffa80623949d0 Vads 385 Clone 0 Private 4314. Modified 1724. Locked 35.
DeviceMap fffff8a00000c5d0
Token fffff8a001d34930
ReadMemory error: Cannot get nt!KeMaximumIncrement value.
fffff78000000000: Unable to get shared data
ElapsedTime 00:00:00.000
UserTime 00:00:00.000
KernelTime 00:00:00.000
QuotaPoolUsage[PagedPool] 0
QuotaPoolUsage[NonPagedPool] 0
Working Set Sizes (now,min,max) (7821, 50, 345) (31284KB, 200KB, 1380KB)
PeakWorkingSetSize 8056
VirtualSize 128 Mb
PeakVirtualSize 133 Mb
PageFaultCount 140829
MemoryPriority BACKGROUND
BasePriority 13
CommitCharge 5761
*** Error in reading nt!_ETHREAD @ fffffa806231b680
16: kd> !thread
GetPointerFromAddress: unable to read from fffff801521cf000
THREAD fffff88003540540 Cid 0000.0000 Teb: 0000000000000000 Win32Thread: 0000000000000000 RUNNING on processor 10
Not impersonating
GetUlongFromAddress: unable to read from fffff801520eecf0
Owning Process fffff801521c9200 Image: <Unknown>
Attached Process fffffa80610d9040 Image: System
fffff78000000000: Unable to get shared data
Wait Start TickCount 83923437
Context Switch Count 81662025
ReadMemory error: Cannot get nt!KeMaximumIncrement value.
UserTime 00:00:00.000
KernelTime 00:00:00.000
Win32 Start Address nt!KiIdleLoop (0xfffff80151efa960)
Stack Init fffff8800355dc90 Current fffff8800355dc20
Base fffff8800355e000 Limit fffff88003558000 Call 0
Priority 16 BasePriority 0 UnusualBoost 0 ForegroundBoost 0 IoPriority 0 PagePriority 0
Child-SP RetAddr : Args to Child
: Call Site
fffff880`0355d7f8 fffff880`054df845 : 00000000`0000009e fffffa80`62361780 00000000`0000003c 00000000`00000000 : nt!KeBugCheckEx
fffff880`0355d800 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : netft!NetftProcessWatchdogEvent+0xdd
The defunct process is the CLUSVC.exe which is the cluster service.
EMC support checked further for a fix for this issue, and found that it’s a reported issue with Hyper-V and this following article has the hotfix patch for 2008 R2: KB 2135160
Now stuck for solution for Hyper 2012, is there any hotfix available?
Plz help
Regards
Nitin -
Reporting Tools for Hyper-V 2008 R2
Are there any documenting or reporting tools for Hyper-V 2008 R2? I just need to get a list of all VM guest running and their associated VHD files along with where those VHD's are stored.
Thanks!
Kristopher Turner | Not the brightest bulb but by far not the dimmest bulb.Sam,
Thanks, we are at the start of an upgrade from 2008 R2 to 2012 R2. Just needed an easier way to pull information about the current environment like what location each VHD for each VM is located and if there are any snap shots saved, etc.
Just planning ahead to help make the migration easier. The current environment is a mixture of CSV's and direct LUN's. So it should be interesting when we start our migration planning.
Noticed you are from the King of Prussia area? Just spent a few weeks over at the Hilton Garden Inn at Valley Forge.
Kris
Kristopher Turner | Not the brightest bulb but by far not the dimmest bulb. -
CVE-2014-0513 hotfix for CS5?
Hello,
I was checking to see if there is a hotfix for CS5 regarding this vulnerability: CVE-2014-0513
I have searched however it seems to only be for CS6 so wondering if CVE-2014-0513 even applies to CS5?
Please advise.
Thanks
ReggieHi Jacob,
Is there a post or something that lists it? I went to the link you posted but I didn't see a mention of CS5 for CVE-2014-0513
The only thing I saw was for CS6
CVE-2014-0513 : Stack-based buffer overflow in Adobe Illustrator CS6 before 16.0.5 and 16.2.x before 16.2.2 allows remot… -
Restore Log with Standby Mode on VHDX disk problem - hotfix for SQL 2014 needed
Restore Log with Standby Mode on Virtual VHDX disk cause a 9004 error in SQL Server 2014 ( test performed on Web edition and Standard version )
Similar Bug for SQL 2008R2 is already registered with number hotfix
KB2987585
Restore operations always fail in Hyper-V R2 Server in situations ( text copied from
KB2987585 page )
The primary database has its transaction log file (.ldf) stored on a disk that has "Bytes per Physical Sector" set as 512 bytes.
You take the transaction log backups of this database, and then you try to restore it by using the standby option on the secondary database.
The secondary database transaction log file (.ldf) is located on a VHDX disk that has "Bytes per Physical Sector" set as 4,096 bytes.
In this scenario, the restore operation fails and returns the following error message:
Error: 9004, Severity: 16, State: 6.
An error occurred while processing the log for database '<databasename>'. If possible, restore from backup. If a backup is not available, it might be necessary to rebuild the log.
After this error occurs, the secondary database goes into a suspect state.
So restore from Generation1 to Generation2 machine ( where only VHDX disk is possible ) always fails and database is not accessible.
Please create hotfix for SQL 2014 versionPlease create hotfix for SQL 2014 version
This is a community forum, no one of use can create a hotfix for SQL Server.
Raise a case at Microsoft Support or create an entry at MS Connect:
http://connect.microsoft.com/SQLServer
Olaf Helper
[ Blog] [ Xing] [ MVP] -
How to get the list of values for a dynamic parameter using Web Services SDK?
<p>I am struggling to get the list of values for a dynamic parameter of a report.</p><p>I am using Java Web Services SDK ... I tried to use PromptInfo.getLOV().getValues() method but it does not work.</p><p>First of all ... is this possible (to get the list of values for a dynamic param) using Web Services?</p><p>Second of all, if this is possible, how should I do it ... it seems it works fine when running the report from CMC. It asks for DB logon info and after that it provides a list of values.</p><p>Thx </p>
<p>Your assumption is correct. We are trying to get the LOVs from the Crystal Report. I was not aware that this is not supported by Web Services SDK.</p><p>We used Web Services SDK to integrated the Crystal Reports in our web application. We implemented some basic actions for reports: schedule, view instances, run ad-hoc reports.</p><p>We encountered this problem when trying to run/schedule reports with dynamic parameters (a list of values from DB). We were unable to get the LOVs.</p><p>Please let me know if you can think of an alternative to look at.</p><p>Thanks a lot,</p><p>Catalin </p>
-
Report for list of POs for with Invoice has not been posted
Hi All
Can anybody tell me the report for list of PO' for which GR has already been done but Invoice is not posted
Thnks
RanjithHi
Try Report ME2M,
With input selection parameter "WE101".
Hope this helps.
Harish -
How can I export a list of events for one of many calendars - e.g. "sailing" to use in Excel?
See this thread here
Display number of emails by sender -
Is there a way to change the order of the listing on Hub for Z 10?
Is there a way to move the order the listing is set for the Hub on Z 10?
I've messed around with my Hub settings for a while and I don't see any way of changing the order so I'm pretty sure it can't be done. That's just a guess but I make pretty good guesses.
Cheers.
- If my response has helped you, please click "Options" beside my post and mark it as solved. Clicking the "thumbs up" icon near the bottom of my response would also be appreciated. -
Is there any object in labview that contains a list of data for the user to select (selection one at a time) or add a new data?
List and table controls -> listbox..is that what you are thinking of?
The listbox presents the user with a list of options, and you can set it to only accept one selection at a time...Adding new data to the list can not be done directly by the user but if you make e.g. a text control and a button you can programatically insert new objects described in the text box when the button is pressed...(see example).
If you need more than one column you have the multicolumn listbox. If you want the users to write new entries directly yu can use a table and read selected cells using it's selection start property to read what cell has been selected.
MTO
Attachments:
Listbox_example.vi 34 KB -
Cascading Select Lists - Not Working for me
I am trying to implement Denes Kubicek's Ajax Cascading Select List solution.
http://apex.oracle.com/pls/otn/f?p=31517:119
But it is not working for me.
I'm a newbie to APEX and checked the forum for advice on cascading select lists. I saw the thread for
"Cascading Select Lists - Not Working" posted by sue and the replies by Varad Acharya, but I'm still
having issues of not seeing the alerts, not able to run the pl/sql process in SQL Workshop, and not
getting the expected results.
I have a list of countries (US - USA, CA - CANADA, etc.) and a list of states for each country. When a
user selects a country I would like to show the list of states within that country.
This is what I've done so far:
Defined an application process:
Process Point: On Demand: Run ... by a page process.
Name: CASCADING_SELECT_LIST1
Process Text:
BEGIN
OWA_UTIL.mime_header ('text/xml', FALSE);
HTP.p ('Cache-Control: no-cache');
HTP.p ('Pragma: no-cache');
OWA_UTIL.http_header_close;
HTP.prn ('<select>');
HTP.prn ('<option value="' || 99 || '">' || '- All States -'
|| '</option>'
FOR c IN (SELECT state_code || ' - ' || state_desc d, state_code r
FROM tbk_state
WHERE country_code = :cascading_selectlist_item_1)
LOOP
HTP.prn ('<option value="' || c.r || '">' || c.d || '</option>');
END LOOP;
HTP.prn ('</select>');
END;
defined and application item:
Name: CASCADING_SELECTLIST_ITEM_1
Build Option: - No Build Option -
Created a 'Form on a table with report' as follows:
Page 5: Report on TBK_HARDWARE_LOCATION
Page 6: Form on TBK_HARDWARE_LOCATION
in HTML Header of the page attributes for 'Form on TBK_HARDWARE_LOCATION' I have:
<script language="JavaScript" type="text/javascript">
<!--
htmldb_delete_message='"DELETE_CONFIRM_MSG"';
//-->
</script>
<script>
function get_select_list_xml1(pThis,pSelect){
var l_Return = null;
var l_Select = html_GetElement(pSelect);
alert ('Dept no=' + pThis.value);
var get = new htmldb_Get(null,html_GetElement('pFlowId').value,
'APPLICATION_PROCESS=CASCADING_SELECT_LIST1',0);
get.add('CASCADING_SELECTLIST_ITEM_1',pThis.value);
gReturn = get.get('XML');
// gReturn = get.get();
alert('Enames=' + gReturn);
if(gReturn && l_Select){
var l_Count = gReturn.getElementsByTagName("option").length;
l_Select.length = 0;
for(var i=0;i<l_Count;i++){
var l_Opt_Xml = gReturn.getElementsByTagName("option");
appendToSelect(l_Select, l_Opt_Xml.getAttribute('value'),
l_Opt_Xml.firstChild.nodeValue)
get = null;
function appendToSelect(pSelect, pValue, pContent) {
var l_Opt = document.createElement("option");
l_Opt.value = pValue;
if(document.all){
pSelect.options.add(l_Opt);
l_Opt.innerText = pContent;
}else{
l_Opt.appendChild(document.createTextNode(pContent));
pSelect.appendChild(l_Opt);
</script>
On Page 6: 'Form on TBK_HARDWARE_LOCATION' I have the following items (plus some others):
Name: P6_COUNTRY_CODE
Display as: Select List
HTML Form Element Attributes: onchange="get_select_list_xml1(this,'P6_STATE_CODE');"
Source Used: Only when current value in session state is null
Source Type: Database Column
maintain session state: Per session
Source value or expression: COUNTRY_CODE
Named LOV: LIST OF COUNTRIES
Name: P6_STATE_CODE
Display as: Select List
Source Used: Only when current value in session state is null
Source Type: Database Column
maintain session state: Per session
Source value or expression: STATE_CODE
Named LOV: - Select named LOV -
List of Values definition:
select state_code || ' - ' || state_desc d, state_code r
from tbk_state
where country_code = :P6_COUNTRY_CODE
order by 1
LIST OF COUNTRIES is defined as:
select country_code || ' - ' || country_desc d, country_code r
from tbk_country
order by 1
Now to the problem:
I run page 5 (the report) to see the list of locations and then I try to edit a record (page 6). When I
try to select a different country I get the following error (on IE):
"Problems with this web page might prevent it from being displayed properly or functioning properly.
In the future, you can display this message by double-clicking the warning icon displayed in the status
bar.
Line: 17
Char: 5
Error: Object expected
Code: 0
URL: http//cmrac4.cm.timeinc.com:7777/pls/htmldb/f?
p=114:6:1413254636072443110::::P6_HARDWARE_LOCATION_ID:2
I don't see any of the alert messages.
I also tried to run the application process code in the SQL - Command Processor (I replaced
:cascading_selectlist_item_1 with 'CA' or 'US') and got the following:
The XML page cannot be displayed
Cannot view XML input using XSL style sheet. Please correct the error and then click the Refresh
button, or try again later.
Only one top level element is allowed in an XML document. Error processing resource
'http://cmrac4.cm.timeinc.com:7777/pls/...
<select><option value="99">- All States -</option><option value="X1">X1 - X1</option><optio...
Can someone help me please?Varad,
First, thank you for taking the time to try to help me with this problem.
When I view the page's source code (here are the first few lines):
<html lang="en-us">
<head>
<script src="/i/javascript/core.js" type="text/javascript"></script>
<link rel="stylesheet" href="/i/css/core.css" type="text/css" />
<script language="JavaScript" type="text/javascript">
<!--
htmldb_delete_message='Would you like to perform this delete action?';
//-->
</script>
<script>
function get_select_list_xml1(pThis,pSelect){
var l_Return = null;
var l_Select = html_GetElement(pSelect);
//alert ('Dept no=' + pThis.value);
var get = new htmldb_Get(null,html_GetElement('pFlowId').value,
'APPLICATION_PROCESS=CASCADING_SELECT_LIST1',0);
get.add('CASCADING_SELECTLIST_ITEM_1',pThis.value);
gReturn = get.get('XML');
// gReturn = get.get();
//alert('Enames=' + gReturn);
if(gReturn && l_Select){
var l_Count = gReturn.getElementsByTagName("option").length;
l_Select.length = 0;
for(var i=0;i<l_Count;i++){
var l_Opt_Xml = gReturn.getElementsByTagName("option");
appendToSelect(l_Select, l_Opt_Xml.getAttribute('value'),
l_Opt_Xml.firstChild.nodeValue);
get = null;
function appendToSelect(pSelect, pValue, pContent) {
var l_Opt = document.createElement("option");
l_Opt.value = pValue;
if(document.all){
pSelect.options.add(l_Opt);
l_Opt.innerText = pContent;
}else{
l_Opt.appendChild(document.createTextNode(pContent));
pSelect.appendChild(l_Opt);
</script>
It looks like line 17 is:
var l_Select = html_GetElement(pSelect);
I'm still not sure why I'm getting this error and why it's not working?
Thanks,
Eti -
What is the best free backup solution for Hyper-V R2/2012? CSV support is necessary
Hi,
I need so guidance, please.
I’m planning to deploy a free backup solution for my virtual environment and I need your advice. I have the following configuration:
Failover Cluster:
Two Dell Servers
OS: Windows 2012 STD
Each server has two AMD Opteron 4180 6C @ 2.6 GHZ
16 GB – RAM (supports 256GB)
QNAP NAS (CSV)
It’s hosting a DC, an Exchange 2010 and soon a SharePoint 2013 VM
Standalone Hyper-V:
Dell Server
OS: Windows 2008 R2 Datacenter
It has two Intel Xeon E5520 @ 2.2 GHZ
16 GB - RAM
It’s hosting 3 VMs
In my research I found these apps. All of them are limited in some way but they do the job:
Veeam Backup Free Edition v7
Altaro Hyper-V Backup
Unitrends Enterprise Backup
PHD Virtual Backup for Hyper-V
HV Backup from CodePlex
Windows Server Backup (WSB)
What is your experience with them? What would you recommend?
When it comes to money, which one is more affordable? (In case I want to buy the full version)
Thanks in advanced.Hi,
I need so guidance, please.
I’m planning to deploy a free backup solution for my virtual environment and I need your advice. I have the following configuration:
Failover Cluster:
Two Dell Servers
OS: Windows 2012 STD
Each server has two AMD Opteron 4180 6C @ 2.6 GHZ
16 GB – RAM (supports 256GB)
QNAP NAS (CSV)
It’s hosting a DC, an Exchange 2010 and soon a SharePoint 2013 VM
Standalone Hyper-V:
Dell Server
OS: Windows 2008 R2 Datacenter
It has two Intel Xeon E5520 @ 2.2 GHZ
16 GB - RAM
It’s hosting 3 VMs
In my research I found these apps. All of them are limited in some way but they do the job:
Veeam Backup Free Edition v7
Altaro Hyper-V Backup
Unitrends Enterprise Backup
PHD Virtual Backup for Hyper-V
HV Backup from CodePlex
Windows Server Backup (WSB)
What is your experience with them? What would you recommend?
When it comes to money, which one is more affordable? (In case I want to buy the full version)
Thanks in advanced.
Any Altaro Hyper-V Backup User? -
Report to find out for list of users for whom we have changed the password
Dear Friends,
Is there any way to find out the list of users for whom the passwords have been changed. We have standalone EP server built on 7.0 with Stack 08.
Best Regards
Sita RamHi Sita Ram,
here is the
public void doProcessBeforeOutput() throws PageException {
IPortalComponentRequest request = (IPortalComponentRequest) this.getRequest();
IPortalComponentResponse response = (IPortalComponentResponse) this.getResponse();
Form myForm = this.getForm(); // get the form from DynPage
IUserFactory userFact = UMFactory.getUserFactory();
try {
IUserSearchFilter groupFilt = userFact.getUserSearchFilter();
groupFilt.setSearchAttribute(
"com.sap.security.core.usermanagement",
"uniquename",
ISearchAttribute.LIKE_OPERATOR,
false);
ISearchResult result = userFact.searchUsers(groupFilt);
List list = new LinkedList();
// Iterator currentMembers = null;
while (result.hasNext()) {
String name = (String) result.next();
list.add(name);
Collections.sort(list);
Iterator iter = list.iterator();
while (iter.hasNext()) {
IUser testUser = userFact.getUser(iter.next().toString());
IUserAccount acc[] = testUser.getUserAccounts();
String dispUser = testUser.getUniqueName();
response.write("<br>"+dispUser+"- last changed password on "+acc[0].getLastPasswordChangedDate().toLocaleString());
} catch (UMException e) {
response.write("<br>Searching failed - " + e.getLocalizedMessage());
develop the project in the NWDS and deploy it into the portal.
Regards,
Sithi
Maybe you are looking for
-
I Have Photoshop CS 8.0 for MAC
Sometimes when im trying to open a PSD file i get a window saying text layer invalid and it the file wont open. do i need to upgrade my photoshop?
-
CMC - Authentication - SAP Entry?
Hi, we installed (or we are trying to install) SAP Integration Kit (Server + Client). When I try to logon now to server, I can choose between Enterprise, LDAP,Windows AD AND SAP. This is good. But when I goto CMC -> Authentication -> I can't s
-
Can I download the older version of iDVD I had with OS 10.2?
I recently upgraded to OS 10.4.8 having stayed with 10.2.8 for ages. I noticed that when I came to access iDVD it wasn't there! I imagine that, as is the case also with iPhotos, it is now part of the iLife package. I was able to download an adequatel
-
Having issues with permissions on external hard drive.
I'm very new to my MacBook Pro, and I'm having an issue with my external hard drive. I used it to bring important files (mostly music) from my windows 7 laptop to my mac. Once I finished that I noticed that I was missing some of my music which luckil
-
I Got an ipad2 not to long ago an pd I have had to go through seven chargers already, can someon eplease explain why this keeps happening?