List of Inbound Deliveries with handling units

I am looking for standard report where i can get the list of inbound deliveries with handling units linked to them.
I saw VL06I but could not get the details.
Regards
Sameer

I think only HUMO (tab: "Assignment to objects") is the transaction in which you can get a list with IBD no. and HU no. However, the selection screen is not be the best...
In VL06I you also have the handling units ("List Inbound Deliveries" button) both on selection screen and in the report.
Please carefully read OSS notes 368917 and 122282 about this.

Similar Messages

  • List of inbound deliveries with status of Inbound delivery

    Dear all,
    I need to get list of inbound deliveries with status of Inbound delivery. please let me know where can i get it. either table or tcode. also table would be helpful

    Hi,
    Go to VL06O and select the list of deliveries option.
    enter your delivery type .
    You can have header as well as item level details.
    Regards,
    Krishna O

  • Updating deliveries with handling unit

    Hi Guru’s,
      Good afternoon all of you. Let me share my problem with all of you. I am modifying some deliveries through VL02N with pick quantity and handling unit to zero. I am modifying all most all 500 to 1500 deliveries daily right now and they may increase. All this procedure is done manually. Requirement is client wants all this procedure automatically. So I would like to ask you that is there any function module for updating the delivery with the modified picking quantity and handling unit? Please suggest me how can I approach? I am not asking entire logic. Just I want is it possible and is there any FM? Your help will be greatly appreciated. Waiting for your valuable replies.
    Regards,
    Ravi.

    Ravi,
    It is good that the Handling unit is static. Is the Picking quantity Dynamic? If so, are they available somewhere in the system prior to you manually populating them in the delivery document?

  • Deliveries with Handling Unit

    Hi guys,
    I'm trying to set up an AII and an OER systems that are able to cater to deliveries that contain Handling Unit.  Do any of you have any idea how is this possible?  I'm not exactly sure but I'm guessing some kind of add-on needs to be installed since there isn't any option to configure HU in AII and OER.  Thanks a lot for the help!
    Best regards,
    Chin Hun

    Ravi,
    It is good that the Handling unit is static. Is the Picking quantity Dynamic? If so, are they available somewhere in the system prior to you manually populating them in the delivery document?

  • Serial numbers in Inbound delivery for Handling units

    Hello Experts,
    I have the following scenario:
    Purchase order + Inbound delivery + GR
    Inbound delivery is used because I need to create handling units, the materials included in these handling units are serialized and I am getting from the vendor an excel document with Handling unit number and the serial numbers included in each handling unit.
    So I would like to use this document to do the packing process in my inbound delivery instead of manually typing the serial numbers.
    What would be the best option to do this?
    I also need to do the same for MIGO when no HU are needed.
    Any Ideas??
    Thanks a lot in advance for your comments.

    Thanks a lot for your quick answer.
    I would like to avoid creating my own Z transaction, is there any point in packing process where I can include some enhancement to upload the serial numbers, I gues the HU and packing process can be done manually by the user.
    I was planning to enhance MIGO for the same process without handling units and I know that  there a tab can be added at item level. But I do not know where or how to do it while packing.
    Any suggestions?
    Thanks a lot for your time!

  • List of inbound deliveries whose GR is pending

    All SAP Gutrus,
    In VL06I; we can get is the list of all the inbound deliveries done in perticular period for entire client.
    But how we can gwt  the list of inbound deliveries done for perticular period for the perticular plant.
    And more ever is it posible to get the list of thoe inbound deliveries whose GR has been done or GR is pending?
    Please reply.
    Regards,

    HI Can try with VL06IG or  VL06IP

  • Destructive Samples with Handling Units

    Dear Experts,
    I just wanted to check if there's anyone who has encountered destructive inspection for samples with Handling Units and how this was managed (via enhancements/operational workaround).
    Based on SAP KBA 1771624, destructive sampling will not work for HU due to all or nothing approach. We are currently considering the following options but would like to get your insights on this in case there is a better approach for this problem.
    1. During Goods Receipt, sample usage quantity will be packed in separate HU from the rest of the quantity. This option will work provided that sample usage quantity is known before quality inspection. e.g. I will recieve 100 pcs of MAT A, 15 pcs for sample usage will be packed under HU1 and the remaining 85 pcs under HU2. UD stock posting will be performed in 2 steps, 1st for GI to sample usage for HU2 and 2nd for transfer to unrestricted/blocked/etc. for HU2
    2. Receive full quantity under 1 HU. Complete quality inspection (results recording, ud and stock posting). Unpack the material to be able to perform GI to sample for the quantity that was used for destructive inspection.

    Hi Craig/Vignesh,
    Thank you for your providing your inputs on this. I will take them into consideration.
    I have another option to address this requirement, that is to (1) receive the material into non HU storage location (2) perform UD and stock posting, i.e. GI to sample usage and unrestricted-use/blocked stocks (3) transfer unrestricted-use/blocked stocks to HU managed location.
    Do you think this will be more efficient operationally versus the other 2 options above?
    I am trying to find the most effective way to address this requirement with minimum impact to Logistics operation. Most of our materials are managed in HU and destructive sampling is regularly done so users will be performing the steps in SAP a lot.

  • Inbound deliveries with STO

    Hi,
    I am currently designing an interface with an external WMS and I am thinking to use inbound deliveries but it seems inbound deliveries with stock transport order have important restrictions :
    1. inbound deliveries are created with the quantity from the STO and not from the outbound delivery => risk on stock in transit
    2. The batch numbers are not copied from the outbound delivery to the inbound delivery (it is done in GR with MIGO if you post from outbound delivery)
    3. I haven't (yet) found a way to create automatically an inbound delivery when you post the goods issue from the outbound delivery. (it seems SAP is providing special development for that ?)
    Does anyone experienced the use of inbound deliveries with STO and what are your recommendation?
    Thanks a lot,
    JP

    Hi,
    We want to create inbound delivery in order to interface with an external WMS (Warehouse Management). We are not using standard SAP "decentralized WMS" interface.
    By using inbound deliveries for the interface, we can initiate the GR in SAP and then wait for confirmation from WMS. The WMS can then confirm different quantities if some discrepancies are identified during unloading.
    Also, creating inbound deliveries allow planning for receiving (i.e yard management).
    => We do not want to post the GR first in SAP and then send it to the WMS as they can find some differences during unloading
    => We do not want warehouse operators to work in SAP
    => We need a document in the WMS which will trigger task creation for GR for warehouse operators.
    => We want to use same solution for GR for external purchase orders and STO. So if we use inbound deliveries for PO, we want to use it for STO.
    Does anyone has experienced to create inbound delivery for STO from outbound delivery with Idoc (i.e ASN with DESADV) or specific development ?
    Thanks for your help,
    JP

  • Reversal of delivery with handling unit management/HU #

    Hello all,
    I would like to know whether the delivery with handling unit management is reversed using LTOG. if it is reversed using LTOG in which storage type would the stock be posted back and would the packaging material of the handling unit be the same when the delivery is canceled and posted back in stock. pl. advise.
    Thanks,
    Maxx

    Hi Ramana,
    Thanks for your reply.
    in your answer you have said  it is not possible to reverse a TO with HU.
    But is it possible to reverse a delivery where the HUs are created only after packing the delivery items. if it is possible then how the packaging materials in the handling unit that are reversed are handled and where are the stocks that are returned after the delivery is cancelled is posted - i would like to know the standard sap storage type in which the stocks are posted once the delivery is cancelled or reversed.
    Thanks,
    Maxx

  • List of Inbound deliveries whose GR not  done

    All SAP Gurus,
    How we can know the List of Inbound deliveries whose GR not  done for perticular palnt?
    Regards,

    Hi Rajan,
    In VL06I > List Inbound Deliveries
    - plant > can be filtered trough SLoc (plant+SLoc identifies a SLoc uniquely) - of course not the best, but can be used...
    - fully processed / partially processed GR > 'Total gds mvt stat.' field can be used for this
    GR date cannot be given as selection criteria > you have to customize the report and add the necessary fields (plant field can also be added, better than filter plant trough SLoc), create an own query or you can use MB51 as well.
    As per my knowledge there's no better standard report than VL06I and MB51 for this purpose.
    Csaba

  • List of Inbound deliveries for POs.

    Hi,
    I want to pull out a list of inbound deliveries for POs from production data.
    I am not even sure that they have these inbound deliveries or not. How do I get a list of POs which have inbound deliveries created.
    I tried searching the tables EKKO, EKPO, but of no use.
    What is the easiest way out?
    Regards
    MS

    Hi,
    This are the list of inbound delivery transaction which may help you;
    VL06     Delivery Monitor
    VL06I     Inbound Delivery Monitor
    VL06IC     Confirmation of putaway inb. deliv.
    VL06ID     Inbound Deliveries for Distribution
    VL06IF     Selection inbound deliveries
    VL06IG     Inbound deliveries for goods receipt
    VL06IP     Inbound deliveries for putaway
    VL10B     Purchase Orders Due for Delivery
    VL10D     Purch. Order Items due for Delivery
    VL10E     Order Schedule Lines due fVL10H     Items Due for Delivery
    VL10F     PurchOrd Schedule Lines due for Dlv.
    VL10G     Documents due for Delivery
    VL34     Worklist Inbound Deliveries
    VL64     Worklist Inbound Deliveries
    VL65     Inbound Delivery Purge Report
    VL66     Inbound Delivery Delete Report
    VLUNIV     Change Delivery (General)
    Br,
    Tushar Patankar

  • Inbound deliveries with scheduling agreement

    Hi
      Can anybody send me the configuration setting need to do for inbound deliveries for scheduling agreement.
    -Prabu

    Hi Prabhu,
    For working with inbound deliveries with SA
    Please set up confirmation control in customizing
    Spro>mm>purchasing>confirmation>set up confirmation control
    set up key as inbound delivery make it relevant to GR and assign this while
    creating SA in item detals under conf.control
    for further details ref to following thread
    Vendor Confirmation
    BR
    Diwakar
    reward if useful

  • Goods Movements with Handling Units

    Hi:
    Any one knows how can I get make Goods Movement with Handling Units  inter plants?
    I am trying by VLMOVE but this Tcode just has process for into a Plant not for Transfer posting plant to plant., so, I need give out for materials in Handling Units and Receive the sames in the Receptor Plant
    Is there a special configuration for get this?
    Thanks in advance.
    Omar Perea

    Hi Vishal:
    You're right... I was missing the 301, 303 y 305, but with this operations I can try to resolve my Isuue.
    Thanks
    OP

  • QM lot with Handling Unit Mgt in MD04

    Dear All,
    It seems it is not possible to see the inspection lots in MD04 when using HUM. Any ideas what development is required to make these appear in stock requirements list?

    Yes, that is true but you can still do it by changing a few things. I have just finished my investigation and here are the learnings.Finally, I couldn't use it because we also use APO and to send inspection lots to APO standard SAP needs to be changed which could be risky.
    The OSS note I mentioned says: "......but also using transactions such as Transaction HUMO or Transaction VLMOVE.". This is not very convincing for me because I can disallow particular movement types for transactions HUMO and VLMOVE.I would really like to know other impacts. It is like SAP just decided not to investigate the functionality any further:-).
    To get the insp lots into MD04, you need to chnage view MDQM using se11 and add entry: Table JEST; Field Name STAT EQ u2018I0443u2019. This entry needs to be included before the last line with u2018ORu2019 in the previous step and u2018ANDu2019 operator in this step.Also you need to comment the check on handling units in includes LM61XF2Q and LQPWEF10. These chnages will get the inspection lots in MD04
    But as I said, it is modification in SAP code so could be dangerous because of unknown risks. The OSS note does not explicitly tell other potential impacts.
    If you are using APO as we do, then you need to make further chnages in function: QAPO_GET_LOTS_FOR_APO.
    Include LCLOTUXX>>LCLOTU01
    Function pool- SAPLCLOT
        if SPRQ is not set or HUM is set => delete the lot!!!
        if l_qals_wa-insmk is not set    => delete the lot!!!
          IF    l_stat_wa-sprq IS INITIAL
             OR l_stat_wa-hum  EQ c_x
             OR l_qals_wa-insmk IS INITIAL
             OR l_qals_wa-lmengezub = 0.
            DELETE g_qals_tab.
    But do it at your own risk!
    Edited by: Vijay Singh on Sep 15, 2010 1:00 PM

  • Who familiar with Handling Unit Management(HUM) module?

    Hi,
    It was said that if we active the HUM module in Clint level.  Then the packing BOX number will not be allowed to be duplicated.
    Whether this means that VEKP-EXIDV, this field will not be allowed to be duplicated??
    Could anyone help my understanding on this?  Thanks!
    Thanks.

    Hi,
    HANDLING UNITS CONFIGURATION:
    The SAP Handling Unit Management system allows you to manage the entire movement of the handling units and the materials they contain rather than tracking each material individually. 
    This paper is for the HUM Delivery although some of the contents is related to Inventory under the Logistics General modules.
    Table of Contents
    Objective 
    IMG Menu – The Starting Point 
    Handling Unit Management Overview 
    Start of HUM Outbound Deliveries Manual Packing Configuration 
    Define Number Ranges for Handling Units 
    Define Packaging Material Types 
    Define Material Group for Packaging Materials 
    Define Allowed Packaging Materials 
    Use Handling Unit Supplements 
    Maintain Goods Movements for Handling Unit Stock-Posting 
    Define User Status Profile 
    Set QM Check and Delivery Type for Each Movement Type 
    HU Requirement for Storage Locations and Default Values for Deliveries 
    Packing Control By Item Category 
    Define Requirements for Packing in the Delivery 
    Delivery Type Determination 
    Set Unique Number Assignment for HU Identification 
    Number Range Maintenance for HU Identification 
    Define Number Assignment for Each Packaging Material Type 
    Delivery Output type for Packing List 
    Maintain the Delivery Output Determination Procedure 
    What else to maintain after the Manual Handling Units Configurations? 
    Start of the Automatic Packaging Configuration 
    Define Number Ranges for Packing Instructions 
    Define Determination Type for Packing Instructions 
    Define Number Ranges for Packing Instruction Determination Records 
    What else to maintain after the necessary Automatic Packaging Configurations? 
    Appendix A: How to do Manual Packing for Non-Assigned Handlings Units? 
    Appendix B: Scenario 1 – How to do Manual Packing by Delivery Item? 
    Appendix C: Scenario 2 – How to Manual Pack the Materials into Pallets? 
    Appendix D: How to do Automatic Packing? 
    Appendix E: How to do Goods Movement for Handling Unit Material? 
    Appendix F: How to Unpack the Handling Unit Material? 
    A handling unit is a physical unit that consists of the packaging materials (load carrier / packaging material) and the goods contained therein. A handling unit is always a combination of materials and packaging materials. All the information contained in the material items, such as batches and serial numbers, is always available by way of the handling units.
    Handling units can be nested, meaning that you can also create new handling units from several handling units as often as you like.
    Handling units have unique, scannable identification numbers that can be formed according to standards such as EAN 128 or SSCC.
    Figure 1: Handling unit example
    Structure
    The handling unit object contains the following attributes:
    •     Identification number
    •     Dimensions
    •     Weight
    •     Volume
    •     Status
    •     Materials and quantities
    •     Packaging materials
    •     Packing instructions
    A handling unit consists of a handling unit header and handling unit items. For identification purposes, it is given a unique number.
    Handling unit header
    The header data of a handling unit is divided in the following way:
    •     Weight/Volume/Dimensions
    •     General data
    •     Means-of-transport data
    •     Additional data
    •     Output determination procedure
    For more information about each of these detailed points, see Editing detailed data for handling units.
    Status
    The handling unit is linked to general status management. In this way, the various physical states (planned or implemented) and other attributes (weighed, loaded, blocked or posted goods issue) of handling units can be documented.
    You can use the HU_ST_INIT user parameter when you create handling units without object reference to set which initial status the handling unit is to have when it is created.
    If you want to implement a status of your own, you can define a user-specific procedure for the packaging material type (see also Define Packaging Material Types).
    Handling unit item
    The items of a handling unit can consist of material items, packaging materials or other handling units that appear in an overview. For more information about this overview, see the Contents section of Editing detailed data for handling units.
    To access the item data of an individual handling unit, select the handling unit concerned and choose Goto  Detailed HU data  Contents.
    Integration
    Handling units can be used in all processes within the supply chain.
    Hope this will helps you and Please Reward If Really Helpful,
    Thanks and Regard,
    Sateesh.Kandula

Maybe you are looking for