List of issues with patch level

Is there a list of application errors reported for each patch level?
When working with SAP R/3, there is a SAP note released for each patch level which states the changes delivered in that patch as well as what fixes are delivered. Therefore, it is easy to see what application errors exist in each patch level. Is there something similar for SAP Business One?

There are also notes for those Lists of issues with each patch level for B1. What is your B1 version and PL?
Thanks,
Gordon

Similar Messages

OutLook - addon with Patch Level 36

Dear All,
Outlook addon itegeration is support with Patch Level 36 version or not?
Plz confirm
Regards,
Benjamin

Benjamin,
You can check the patch level 36 readme documentation that comes with the patch to see if it lists incompatibles. You could also check the Outlook Integration documentation to see if it lists the latest tests patch.
As another thought you may want to open a message with SAP Support to verify.
Eddy

Adobe Reader cannot print after installing SAP GUI 6.40 with patch level 25

Hello,
We are in the midst of rolling out sap gui 6.40. Noticed that after installing the gui 6.40 with patch level 25, users cannot print adobe documents. However they can read.
Anyone experienced similar issues? Kindly assist.
Adobe version is 8.
Regards
Sachin

Changes some windows configuration to rectify the above issue.
Thanks
Sachin

List of issues with DM6.0

Here's my list of issues with Desktop Manager 6 that I would like to see addressed.
1) No minimize to system tray. This isn't a huge deal but I'd like to see it return.
2) Halt incoming e-mail to device when connected. This needs to come back. I don't need my Blackberry buzzing on my desk every two minutes when I'm sitting in front of my e-mail client.
3) Folder sync selection. My mail server has rules that automatically sort incoming e-mails into different folders. I'm pretty sure practically everybody in an enterprise e-mail environment does this. In previous versions of DM, there was an option to choose which folders to sync. This is now gone, although I believe because these settings end up stored on the BES server my settings have remained for now. Moving forward, I can't change any of them without talking to our BES administrator.
4) Automatic backup is broken. I've set DM to automatically backup my device "Weekly" when it is connected. What actually happens is every time I connect my blackberry it gets backed up - this can happen multiple times in one day. Pretty useless.
5) Mass storage mode settings on blackberry are bypassed. I have my bb set to prompt whether I want to enable mass storage mode when I connect it. Now, when I connect my bb it immediately enters mass storage mode without a prompt on the device or on the desktop. I have this configured because if you use any kind of custom ringtone, even if it is stored on the internal memory and not on the media card, as soon as mass storage mode is enabled the bb cannot access the files internally and ringtones default back to a standard generic one. I can no longer wander away from my desk and hear my phone ringing and identify that it is my phone.
That's my current (growing) list of issues. I will update with more, if anyone wants to confirm these issues or add others I will add to the list as well.

you need to add media administration is non existent without Roxio Media Manager. You can no longer pick and choose which files to exchange. Synching is the only option.
Also, if media files are encrypted, DM 6 cannot read them. This was dealt with in Roxio Manager by simply inputing the encryption password...

URGENT HELP PLS : Issue with Multi Level Master Detail block

This is an issue someone else had posted in this forum few years back but there was no solution mentioned, I have run into this same issue , The problem is as explained below.
Any help on this is appreciated.
Scenario:
There are 3 Blocks in the form : A (Master Block)
: B (Detail of A )
: C (Detail of B )
There is master detail relation created between A and B and B and C. So initially when we query for a record in Master A, it shows all records properly in B and C.
Now if i navigate to the first record of B , and then second record of B , records corresponding to that record shows up properly in C block.
Till now everything works fine.
Issue 1:
But in case after querying initially on Master Block A,If I go directly to the second record of B block, it clears the whole B block and C block.
Issue 2:
Same thing happens if I am on C block ( corresponding to second record of B block) and then navigate to first record in B block , it again clears the whole B block and C block.
Please Help !!
Thanks !

Thanks Xem for Your reply , I tried those settings but it did not help..here is the original link that to the thread that talks about the same problem ,
Issue with Multi Level Master Detail block
The last update to this was the following :
"I figured out that this is happening because Block Status is set to 'Changed' and this is causing it to clear out the blocks.
But cant figure out why the status is setting to 'Changed' "
Any Help from the form Gurus on this form in this matter is truely appreicated !!
Thanks,
Zid.

Issues with patch wizard utility

We downloaded the infobundle manually due to issues with metalink credentials, When we go to run a patch recommendaiton report (with the second filter in the list) it is still giving the error in the log:
"WARNING: The MetaLink Credentials have not been set up.
Please use the MetaLink Credentials page to enter the login credentials you use to connect to the Oracle MetaLink.
The MetaLink Credentials page can be accessed from Setup (Icon on the top right) > MetaLink Credentials link."
Why would it fail if you have already downladed the bundle manually.
Also it shows further down the error log:
"Error : Not able to download the infobundle
Not able to find infobundle in staging area
Infobundle not already uploaded
Hence Failing"
Edited by: user599292 on May 7, 2013 2:37 AM

;) ApPsMasTi ;) wrote:
user599292 wrote:
All that link essentially says is download the infobundle file - then run the report. yes we've done both and it still doesnt work.
How can you tell if its in a directory that "patch wizard" can access? who is the owner of the staging directory
please post the the path of staging directory and the owner directory and infobundle.zip
"Zip file needs to be copied to a system which can access the Patch Wizard staging directory. If the staging directory is on local disk, it must be copied to the system where you run Patch Wizard. If the staging directory is on shared (network) disk, it can be copied to any system with access to the shared disk"
"Make sure the Patch Wizard can read from and write to the staging directory. " - how can you test this?create a file by application user on the stage directory
;) APpPSMAsTi ;)
Sharing is Caringthe server side of the application isnt really a strong point of mine, the staging directory is set up to be backup/patches/apps
I am not to sure what you mean by "owner", or the application user.
here is the error log if of any use:
"Start of the concurrent Program .. [################]
.........PARAMETERS ..................
Parameter name :CRITERIAID::Parameter value : Recommended Patches
Parameter name :ImportPatchInfo::Parameter value : Y
Parameter name :useproducts::Parameter value : Y
Validating Staging directory '/backup/patches/apps'
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Calling InfoBundle Upload Program for Patchlist.... [##############]
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Starting Upload Process...
Program Execution Start time: [#################]
Stage Dir is /backup/patches/apps
Infobundle Path /backup/patches/apps/InfoBundleR12.zip
Downloading InfoBundle starts: [##############]
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
NOTE: MetaLink Connection setup not found. Please manually download Infobundle zip file to staging directory.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
WARNING: The MetaLink Credentials have not been set up.
Please use the MetaLink Credentials page to enter the login credentials you use to connect to the Oracle MetaLink.
The MetaLink Credentials page can be accessed from Setup (Icon on the top right) > MetaLink Credentials link.
Downloading InfoBundle ends: [##########]
Checking for Infobundle in Staging Directory ...
Warning: InfoBundle doesn't exists in /backup/patches/apps
Trying to Recommend using previously uploaded Infobundle ...
**Warning: Request Completion**
Warning: Request Completion
**Warning: Request Completion**
Program Execution End time: [###############]
End of InfoBundle Upload Program ...... [##################]
Error : Not able to download the infobundle
Not able to find infobundle in staging area
Infobundle not already uploaded
Hence Failing
+---------------------------------------------------------------------------+
Start of log messages from FND_FILE
+---------------------------------------------------------------------------+
+---------------------------------------------------------------------------+
End of log messages from FND_FILE
+---------------------------------------------------------------------------+
+---------------------------------------------------------------------------+
Executing request completion options...
Output file size:
36
Finished executing request completion options.
+---------------------------------------------------------------------------+
Concurrent request completed
Current system time is ####
+---------------------------------------------------------------------------+"
Edited by: user599292 on May 7, 2013 4:33 AM
Edited by: user599292 on May 7, 2013 4:35 AM

Long list of issues with CP5 project

I've been working on a project for the past few weeks and its nearing completion. A couple of things have happened which seem to have completely messed up the project. On the surface all looks well but when you actually use it, major usability issues emerge. I've listed the problems below. Would appreciate any advice if possible. Am using CP5 (latest update applied) on an XP pc.
1. Throughout the project development I've been publishing to html to test it. All was working fine until I decided to trial a scorm export. When I selected Quiz Preferences to enable scorm reporting, CP locked up. I was then presented with the top strip of the Preferences menu window with the rest missing. This was a blue strip which ran right across the screen and onto my second monitor. I couldn't close it or escape it, or select anything beneath. So I had to force quit, no choice really.
2. After the force quit I restarted CP and managed to enable scorm reporting. I tested an export (to zip), deployed on my Moodle site and all worked fine. I then noticed I needed to change a few details so went ahead and made these (all I added was a title for the scorm manifest). When I exported again, I ran into problems with my embedded flv videos, saying they were corrupt (which they weren't). I eventually got round this by exporting the zip to its own folder (had been exporting to the main folder containing the CP project file... obviously not a good thing). The exported scorm file is about 74MB.
3. After all the above issues with the videos were sorted, I tested the scorm export and immediately ran into a whole rang of problems. Every single object that had a fade in & out affect had to have it removed as they were greyed out. My embedded videos were barely visable, looking like they'd been set to a 20% opacity in Pshop. Could still be played though, if you could find the play button. The opening slide decided to immediately fade once the scorm pack launched, despite never setting to do anything of the sort. I had to take a copy of another slide and recreate the front slide, then delete the old one. This seems to have fixed that issue. Now my final slide (which follows on from a Quiz Result slide) has decided to do an immediate fade in & out, so you can't read the text. Again I never told it to do that. All objects on the page have effects/transitions off but this hasn't had any affect at all.
4. I have also found a very very odd pattern of behaviour with Click boxes used as links to web sites. I have 8 links on a slide (text boxes with text blue colour & click boxes overlaying). Clicking on the 1st two links works fine, opens them in a new window. Clicking on the 3rd, nothing happens. A 2nd click loads the web page. When you close it you find yourself on the next slide and have to go back. The same pattern occurs for the next 3 links. Very very odd.
5. The other really annoying problem is with my next & back buttons. If I navigate through the package and then click back a few slides (or even go back 1 slide), I can't go forward again. I have to refresh the page. I've also found if I go back to the opening slide its greys outs completely, nothings visable. Again you have to guess when the next button is to move forward. The nav buttons are simple set to "go to next slide" and ticked infinite. This problem completely ruins the who package making it unuseable.
I'm starting to think something has corrupted my project. If its not that then its CP being buggy. One thing I do know is its one of the most sluggish Adobe apps I've ever used. If I can't fix these issues the course won't be useable and I'll have to start from scratch with something else.

Hi there. Welcome to the forum. Sounds like you've had a bad day.
Since no one else has chimed in yet, I'm going to suggest that you get rid of your Preferences file and let Captivate regenerate this, just in case it resolves some of the glitches. This preference file can get corrupted and cause all kinds of weird behaviour. So what I'm suggesting here might sound a bit radical but it's often proven to be successful for Cp weirdness issues.
Here's an explanation I've copied from another post by the eminent Captiv8tr:
You might try clobbering the preferences file. If you look in the following location, you should find the file named captivate_40.dat. Just Close Captivate, delete the file and restart Captivate.
To locate this file, right-click your Start button and choose Explore. This should easily get you in the general area. If you look at the parent folder you should see Application Data. (you may need to configure Windows Explorer to show you this folder) Inside the Application Data folder should be an Adobe folder. And inside the Adobe folder should be the Adobe Captivate folder. And inside this folder should be the file.

Laundry list of issues with ARD 3

I am running the client on aprx 200 systems across multiple subnets (our network is arranged with floor by floor subnets). I was having the very same issues with ARD 2 (and 1 for that matter).
Cannot update client from 2.2 to 3 on multiple systems.
the command either stalls at the "preparing to copy" prompt or fails after the copy finished . I have updated about 2/3 of he 2.2 clients but cannot get the last ones to go.
All Computer list does not refreshing properly.
is there a way to force a refresh of the list? the refresh button does nothing.
Cannot generate reports from the version 3 clients.
I have re-installed ARD
cannot set a remote task server.
I put the server in the field and it blanks the field.

"Cannot update client from 2.2 to 3 on multiple systems."
Ensure the clients are running 10.3.9 or later. If not, update them.
"cannot set a remote task server."
Are you using a second copy of RD Admin application? You cannot use an installed copy of ARD with the same serial number as your installation. You must purchase an additional license.

URGENT: Issue with hierarchy level keys and report drill down

Hi,
BASIC STRUCTURE:
I have created a subject area with 3 facts (FACT_A, FACT_B, FACT_C) and 4 dimesnions (TIME_DIM,DIM_2,DIM_3,DIM_4). Each fact table also has additional aggregate tables aggregated along levels of the time dimension. Also our timw dimension has aggregated dimension tables like TIME_DIM_WEEK, TIME_DIM_MONTH, TIME_DIM_QUARTER and TIME_DIm_YEAR.
GOAL:
All 3 facts have the same measures M_1 and M_2 in them but may not have data for the same dimension values selected.
For example
For month JAN 2000 FACT_A.M1=100$ and no data exists for JAN 2000 in FACT_B and FACT_C. Then in the report
for JAN2000 it should show FACT_A.M1= $100, FACT_B.M1 = 0 and FACT_C.M1 =0. In this case I should be able to drill down to the lowest level.
ISSUE:
The time dimension TIME_DIM has the following levels - Total -> Year -> Quarter -> Month -> Week -> Day
However I am having an issue with drill down in the reports whenever I pull metrics from more than 1 fact at a time. I have defined the level keys but not sure if I need to do anything in addition since I am using aggregates.
I have to fix this issue quickly. Please help me.

Alastair,
All the fact tables have aggregated facts as sources.
I have checked the levels set for each of the sources to the time dimesnion table in BMM and they look okay. So the Time dim table in BMM has 4 source tables
Time_Day (level set to day, table key is "day"),
Time_month (level set to month, table key is "Fiscal_Month_Code"),
Time_Quarter(level set to quarter, table key is "Fiscal_Quarter_Code") and
Time_Year(level set to year, table key is :Fiscal_Year_Code").
Note: No time week aggregate added as logical source.
Again the time dim hierarchy based off of this table has levels: Total -> Year ->quarter -> Month -> week -> day
The levels keys set for each level are
Year -> Primary key is Year_Name (YYYY)(Checked as chronological key) and another key is Year_Num (YYYY)(Checked as chronological key)
Quarter->Primary Key is Quarter_Name (YYYY Qn), another key is Quarter_Number (Format n where n can assum values 1,2,3,4). Both keys are set as chronological keys
Month -> Primary key is Month_Name (MON YYYY), another key is Month_Num (Format n where n can assume values from 1 to 12) Both keys are set as chronological keys
Week -> Primary Key is week name (YYYY Wk nn, where nn can have values from 1 to 53), another key is week num (nn, where nn can have values from 1 to 53)
Day -> primary key set to day (date format)
Issue1: When I try to drill to lower levels it throws out an error saying report cannot find any data because filters may be too restrictive even though I see data at higher level
For ex: If I drill down to Year: 2010 and Qtr: 2010 Q2 and M1:$100 when I click on Qtr to drll to month level it throws me the error
Issue2: when I add year and qtr colums to the report I see data as below which is incorrect
Year_Name Qtr_Name data:FACTA_M1 Data: FactB_M1
2009 2009 Q1 $10 $5
2009 2009 Q2 $20 $80
2009 2009 Q3 $20
2009 2009 Q4 $30
2010 2010 Q1 $100
2010 Q2 $101
2010 Q3 $102 $230
2010 Q4 $103
2011 Q1 $10
In the above example year_name is not showing up for 2010 Q2 and after. However if I change the primary key for level 'Quarter' by having key consist of year name and quarter name instead of just quarter name the issue doesnt occur and drill down works great. The only issue is when I drill from qtr it first shows year name and quarter name instead of showing the next level which would be month name.
Sorry about the long message but I thought you might notice something in how I have set up the keys.
Thanks

Having issues with patches that require multiple reboots in a task sequence?

Are you guys having issues doing a build and capture or deployment, while including the recent patches ?
It looks like another patch is requiring multiple reboots which breaks the task sequence...
Long story short... the last time I created a .Wim file was in June (with ZTIWindowsUpdate) - it included all the patches as of June 2014. This image has been deployed since then with no problem. All the other monthly patches (07/08/09/10/11/12/01) can be
installed successfully through the deployment task sequence with no problem.
Then last week, I decided to create a new .Wim file to include all the patches as of January 2015. In my build and capture step, it exits because one of the updates requires multiple reboot. I checked on the following website and it has not been updated
since October 22nd : http://support.microsoft.com/kb/2894518
Do any of you experiences issues with a WSUS that requires multiple reboot recently ?
Thanks!

As mentioned, the MDT offline updates task will do it. Add it to your build and capture and it will do the work for you using the updates in an update package that you've previously created. Alternatively, use a stand-alone instance of MDT to create your
image (using a build and capture TS of course) -- this can then use a stand-alone instance of WSUS to install the updates into your image which you then import into ConfigMgr.
Jason | http://blog.configmgrftw.com | @jasonsandys

Laundry list of issues with my N9.

I *love* my phone but there are many rough edges. I'm hoping I can fix a few here.
Phone:
1. Does not always wake on double-tap
2. I both love and hate swype keyboard. I hate it because swiping from Q or P swipes out the keyboard. Can this be disabled?
Feed screen:
1. Weather on the feed screen always says "Vienna". I'm no where near any "vienna"
2. Despite showing the right map, on two occasions I've had weather not show me the proper radar.
3. I can't figure out how to retun to my feed screen after launching an item from it. I always have to start at the top?
4. My feed screen only sometimes shows my calendar
Dialer:
1. has trouble matching phone numbers without the +1
2. Why do I have to swipe up to answer o ignore a call, then choose to answer or ignore it? Can't we skip a step?
3. Why are the buttons so small?
Video:
1. I can't play high def video from the Ovi store.
Drive:
1. Has no sound.
Maps:
1. Has no traffic overlay
2. Cannot found local outbakc steak houses by searching on "outback" like in google.

Scorp1us wrote:
I *love* my phone but there are many rough edges. I'm hoping I can fix a few here.
Phone:
1. Does not always wake on double-tap
SOMETIMES THIS HAPPENS TO ME TOO. IT USALLY HAS TO DO WITH ME. MY HANDS ARE COLD, I AM PARTIALLY COVERING THE SENSOR, I TAP TOO QUICKLY, ETC. SEEMS THAT ONCE IT WAS TRIED, I TOOK A SPLIT SECOND AND HAS TO RESET,,,AND PATIENCE IS NOT MY MIDDLE NAME.
2. I both love and hate swype keyboard. I hate it because swiping from Q or P swipes out the keyboard. Can this be disabled?
NOT REALLY. I WOULD LOOK AT WHERE EXACTLY YOU ARE ACTUAULLY STARTING YOUR TOUCH. THERE USED TO BE A DIFFERENT BUG WHEN STARTING WITH THE P BUTTON, BUT THAT WAS FIXED.
Feed screen:
1. Weather on the feed screen always says "Vienna". I'm no where near any "vienna"
DID YOU SET UP YOUR CITIES? THE CITY YOU SELECT LAST SHOULD BVE TTHE CITY YOU SHOW ON THE FEED SCREEN.
I HAVE HAD ISSUES WITH THIS RESETTING ITSELF SINCE I STARTED OVER-CLOCKING, WHERE IT DELETES ALL MY CITIES AND SOMETIMES WHEN I OPENS, IT STARTS LIKE THE FIRST TIME AND SHOWS HELSINKI
2. Despite showing the right map, on two occasions I've had weather not show me the proper radar.
YOURE ON YOUR OWN HERE. I HAVENT NOTICED ANY ERRORS LIKE THIS
3. I can't figure out how to retun to my feed screen after launching an item from it. I always have to start at the top?
I THINK YOU ARE SAYING THAT IF HAVE SCROPLLEDD DOWN AND THEN TAPPED ON A TWEET, IT OPEN TWITTER APP TEN WHEN YOU GO BACK IT STARTS AT THE TOP OF YOUR FEED??? ARE THERE MORE NEW ITEMS WHEN IT GETS THERE, OR THE SAME.
4. My feed screen only sometimes shows my calendar
ARE YOU TALKING ABOUT THE TOP LEFT OR A CALENDAR APP THAT ALLOWS IT TO SHOW YOUR ITEMMS AS THE TOP OF THE FEED?
IF SO, WHICH ONE ARE YOU USING?
Dialer:
1. has trouble matching phone numbers without the +1
MINE SEEMS FINE SO LONG AS THEY ARE INMY CONTACTS WHEN I USES JUST 7-DIGIT NUMBERS IN USA. BUT, IT DOESNT DO THE MATCH UNTIL AFTER I HAVE TAPPED THE CALL BUTTON.
2. Why do I have to swipe up to answer o ignore a call, then choose to answer or ignore it? Can't we skip a step?
YES. IF YOU JUST DONT WANT TO ANSWER, EITHER HOLD YOUR HAND OVER THE LIGHT SENSOR, OR FLIP YOUR DEVICE TO SCREEN-DOWN. THIS WILL IGNORE THE CALL. YOU WILL HAVE TO SWIPE TO ANSWER IT, OR YOU COULD USE EASY ANSWER
AND IT WILL AUTO TAKE THE CALL USING A COMBONATION OF YOU COVERING THE SENSOR AND THE ACCELEROMETER. I USE IT AND IT WORKS FINE.
3. Why are the buttons so small?
WHICH BUTTONS? CALL/END? I FIXED THAT IN MY THEMES. I THOUGHT THEY WERE TOO SMALL TOO.
Video:
1. I can't play high def video from the Ovi store.
SORRY, HAVENT TRIED.
Drive:
1. Has no sound.
I KNOW IFT SOUNDS DUMB....BUT IS YOUR VOLUME DOWN? IF NOT, THEN I WOULD CHECK TO BE SURE THAT YOU HAVE INSTALLED SOME AUDIO VOICES. YOU HAVE TO OPEN MAPS, THEN MENU, THEN SETTINGS, VOICES...MAKE SURE THAT YOU HAVE SOME THERE, IF NOT, DOWNLOAD SOME. THEN MAKE SURE YOU SELECT A VOICE TO BE USED. I HAD THIS ISSUE A WHILE AGO AND THAT WAS WHAT IT WAS....USER ERROR ON MY PART.
Maps:
1. Has no traffic overlay
HAVENT TRIED THIS MYSELF. WILL HAVE TO LOOK AT IT LATER.
2. Cannot found local outbakc steak houses by searching on "outback" like in google.
NO IDEA, SORRY.

Issue with muliti level custom Leave Workflow

Hi,
   our Leave Workflow is multi level Approvals based on Absence codes.
   Say for Example : Case 1: For casual leave 2 Level Approval,
                              Case 2: For Sick Leave 1 Level Approval,
                              Case 3: For Maternity leave 3 Level Approval.
The Workflow is working fine for Case 1 and Case 2. Workflow is Getting Completed. No issues at all here.
The Issue is with Maternity Leave there are 3 level of approvals Manager 1, Manager 2, Manager 3.
   First 2 Managers are able to approve it from portal and for third level approval the work item is going to Manager 3's UWL.
   But when we click on work item it is showing the message like your Work list is Empty.
   Even we have forwarded the work item to Manager 2 and Manager 1 using SWIA. From their UWL also we are getting this same message
   your Work list is Empty.
   Observations:
      Request status is in SENT status.
       Visualization parameters are fine.
       Agent is Ready.
       In R3 Level we are not able to see the worklist details in Approval mode in PTARQ tcode for Manager 3,
      For Manager 1 & Manager 2 it is fine there we had approved in PTARQ.
Here are the Screen shots.
     What Could be the issues? Are we missing something?
     Ideas and Suggestions are welcome
     Regards,
     Arun

Hi Arun
Can you please give a screen shot of the technical workflow log with the step history selected for this step? (ensure that you have tried executing it once from UWL and rcd the same message), then get to the backend WF log).
Also, is the same Workflow task sent to all three levels in a loop or is it a different task at level 3?
Is there any deadline monitoring assigned to the task (for third level)?
Regards,
Modak

List of issues with new look bt vision

Hi,
There are a lot of things that are no longer present in the new look bt vision.
As such they out weigh the "benefits"
Will these issues be addressed at all - and is BT aware of them?
Issues:
1. crashing - it crashes randomly once a week - the old one never crashed once in years.
2. Information - less information now about all programs - no director, only half the actors - normally one sentance now - before it had lots.
3. Slow - sometimes it doesnt react to the controller - then all of a sudden it will "wake up" and do all the button presses i have been trying - in a split second.
4. Interface - why must it move the chanels down when i just want to look at the info on a program - not intutative. Yes i have "given it a go" for a few weeks now. so i am looking at the 5 main channels - i just want to get info on one program but it moves the whole thing down.
5. Interface - on demand. Why cant we fast scroll down any more in the movies section. Why do i have to press Down 92 times just to get to the bottom of all the Vision Films. If this was USA i could sue for R.S.I - oh and new batteries for my controller. Bring back the fast down - it works in the TV guide - but not in Movies.
6. Recording films that have a 5 minute news in the middle - now means i have to record 2 films
7. TV guide - just having to press that extra button to get back to the TV is very annoying. I dont like it at all - the designer must think people would liek to spend more time in the menu than watching the TV!!
there are other points but im at work at the moment and cant remember them.
Main gripe is its soo time consuming to use the on demand due to not being able to scroll quickly that i dont see any benefit with BT Vision in its present state.
I used to be a big fan and recommended this to friends - i now say the opposite.
The menu should be functional - you try scrolling through all the on demand films (in list or the other mode) - how many button presses do you need?
very unhappy - please fix this
regards
Jim

jim_slough wrote:
Hi,
There are a lot of things that are no longer present in the new look bt vision.
As such they out weigh the "benefits"
Will these issues be addressed at all - and is BT aware of them?
Issues:
2. Information - less information now about all programs - no director, only half the actors - normally one sentance now - before it had lots.
That's a function of using the Freeview+ EPG which BT have no control over. There was no shortage of users asking for this on the old system for various reasons. This won't change unless Freeview changes it, so get used to it.
4. Interface - why must it move the chanels down when i just want to look at the info on a program - not intutative. Yes i have "given it a go" for a few weeks now. so i am looking at the 5 main channels - i just want to get info on one program but it moves the whole thing down.
Not really sure what your problem is here, it's the same amount of button presses either way and it probably makes the interface faster to have a single current channel line than fiddling around with display on multiple lines.
5. Interface - on demand. Why cant we fast scroll down any more in the movies section. Why do i have to press Down 92 times just to get to the bottom of all the Vision Films. If this was USA i could sue for R.S.I - oh and new batteries for my controller. Bring back the fast down - it works in the TV guide - but not in Movies.
Yeah, that's pants and needs fixed. BT are aware.
7. TV guide - just having to press that extra button to get back to the TV is very annoying. I dont like it at all - the designer must think people would liek to spend more time in the menu than watching the TV!!
Press Exit instead of Back. Job done.

List of issues with PC suite

Hello everybody,
This is my first post here. I've been using PC suite for a while (over 2 years now) with my 6131 and even when there was a lot of improvements in PC suite, I've found some problems and inconsistencies in the use.
First, sometimes when I sinc my phone with Outlook (usually when I have to re-pair my bluetooth device) I get duplicated entries in the contacts, calendar, tasks and notes. These duplicated entries have something in common, they all have an added space in some part of some of the text fields. This has happened at least 4 times with different versions of PC suite.
Secondly, I've used the Nokia Comunication Centre 2.0 and found it a great application. But, (there's always a "but") I have a sugestion to make regarding the messaging management. I've verified that when you create a new SMS and send it through the NCC, that message does not appear on the sent messages folder of the phone, even when I've set my phone to do so. Another thing is that if you create a message and save it in the Drafts folder, and then edit and send that message, it does not get deleted from the Drafts folder.
Finally, another sugestion about the NCC. I've observed that you can get a notification on your computer when there's an incoming call or message in your phone and that you can answer it, deny it or reply with a message, great thing! But if you choose to answer the call, with your phone in the desk, flap closed, there's no way for you to hear the other party, you'll have to take your phone, open it and then choose how to continue the conversation. Same thing if you want to call somebody from your contact list. There should be the possibility to remotely activate the loudspeaker in that case or to use your computer's microphone and speakers to take the call.
Well, I got it out of me, it would be great if you can add your comments and/or help me with these issues.
Thanks, regards.

you need to add media administration is non existent without Roxio Media Manager. You can no longer pick and choose which files to exchange. Synching is the only option.
Also, if media files are encrypted, DM 6 cannot read them. This was dealt with in Roxio Manager by simply inputing the encryption password...

Issue with patch 8.1.3 deployment

He have Acrobat 8 standard deployed from an administrative image on the server. It was at version 8.1.2. I patched the image with the 8.1.3 update (AcrobatUpd813_all_incr.msp). Everything went smoothly. I deployed the updated image to our systems, and that went smoothly.
At this point, I start getting suspicious because Acrobat patches are always problematic. Sure enough, just as I think I'm in the clear, I've run into a problem. From within the program, I click Help -> About Adobe Acrobat Standard, and the version shows as 8.1.2. Add/Remove programs lists Adobe Acrobat 8.1.3 Standard.
I tried repairing the installation, re-installing - so far nothing gets the About dialog to show 8.1.3. Is there a bug with the patch? Any ideas what might cause this behavior? How can I verify the patch is fully installed?
Thanks.

It looks as though it is a problem with the incremental patches. If you watch the log file for the registry key mentioned above you will see the installer write the correct value to the registry and then turn around and write the correct value for 8.1.2.
MSI (s) (A8:FC) [05:57:29:094]: Executing op: RegOpenKey(Root=-2147483646,Key=SOFTWARE\Adobe\Adobe Acrobat\8.0\Installer,,BinaryType=0)
MSI (s) (A8:FC) [05:57:29:094]: Executing op: RegAddValue(Name=VersionMin,Value=#196608,)
MSI (s) (A8:FC) [05:57:29:094]: Executing op: RegAddValue(Name=VersionMin,Value=#131072,)
This is because when the incremental patches are applied they create multiple components in these components there are UpdateFiles_812 and UpdateFiles_813, and both of these contains different values for the same registry key mentioned above. So when the Windows Installer writes the install script at runtime the registry table entry for UpdateFiles_813 is lucky enough to get picked first and so when the Windows Installer service comes by the UpdateFiles_812 entry the UpdateFiles_813 entry is overwritten.
So if anyone is using a transform you can drop the Registry26804_812 row from the registry table and that will fix the problem.

List of issues with patch level

Similar Messages

Maybe you are looking for