List of messages in the PCUI screen

Hi Friends,
Iam working in CRM 4.0.
We have a list of messages displayed on the top of the PCUI screen. We can see a message on the top and a 'Show List' link at the top right side. When we click on that 'show list' it displays the remaining messages if any. When we click on the 'Hide List' link it will hide all the messages and only one message is displayed at the top.
My requirement is, I want the list of messages to be displayed by default. I mean without clicking on the 'Show List' link, when my page loads, all the messages should be displayed and 'Hide List' link should be displayed. On clicking the 'Hide List' it should hide the list of messages except one.
How to solve this...
Regards,
Raju

Hi Raju,
For this you will have to change the code a little bit and it will be a customer modification . The Show List and Hide List are links, you will have to disable then and maintain the code which will display all the errors. This will invovle change in the view and the controller.
Please let me know incase you want further details..
Regards,
Hemanth

Similar Messages

  • HT201365 When I upgraded my iPhone 4s to IOS7, I lost all my app icons. Where did they go? Interestingly they are still listed in notifications and I could play words with friends when I got a message on the home screen that it was my turn (but still no i

    When I upgraded my iPhone 4s to IOS7, I lost all my app icons. Where did they go? Interestingly they are still listed in notifications and I could play words with friends when I got a message on the home screen that it was my turn (but still no icon)

    Hey linfrommi,
    Thanks for the question. I understand that you are having trouble locating some application after the update to iOS 7. To troubleshoot this issue, let’s reset the home screen layout of your iPhone, which should move all of your applications to the second “page”:
    Reset iPhone settings - iPhone
    http://help.apple.com/iphone/7/#/iph7a2a9399b
    Reset Home Screen Layout:  Returns the built-in apps to their original layout on the Home screen.
    Thanks,
    Matt M.

  • Error message at the selection screen while processing screen logic

    Hi All,
      I need to show error message at the selection screen.
    I am calling the screen inside the START-OF-SELECTION, and processing the calculation and putting the data into i_final internal table. If internal table I_FINAL is empty I have to show error message saying ' DATA is empty' , this error message should be shown at the SELECTION SCREEN (Report input screen 1000) and provide the user to enter the input values once again.
    But whenever I am populating error message, I am getting a pop up to chose exit, and process is terminating.
    Since I am in the middle of the screen processing whenever I am giving a error message.
    Please let me know how can I populate error message without terminating the process while I was in the middle of the screen processing logic.
    Regards,
    Mahesh

    hi
    If u are trying to validate a field use
    AT SELECTION_SCREEN ON <field>
    if want to validate a block
    AT SELECTION SCREEN ON <block>
    If Universal Validation
    AT SELECTION SCREEN
    and display a 'E' Message inside the block.
    You can Enter Correct Value and start processing Forward.
    hope this will help.
    Regards
    Sumit Agarwal

  • Responding to a message from the lock screen

    Hello,
    I just upgraded to an iphone 6 plus and I wanted to use the feature that allows me to respond to messages on the lock screen.  Right now it is not allowing me to do so.  I upgraded from the iphone 4 and used the data that I had on it to restore my 6 plus.  Is this the

    Great support as always Apple.

  • Can you turn off the display of txt message on the locked screen?

    Can you turn off the display of a txt message on the locked screen?

    Settings > Notifications > Messages > Notification Center > OFF.

  • Process chain status message in the custom screen.

    HI All,
    We have created a custom screen for hierarchy upload in BW once the file has been uploaded it will trigger an event which is triggering a process chain. The process happen like
    Upload the file from desktop it will go and sit in al11 folder
    Trigger an event which will trigger the process chain
    Infopackge routine has been written which will download the file for al11.Please find the attached screenshot is for your reference.
    Once the DTP has been completed we need to trigger a message which will tell us the status of the DTP like finished successfully or not. This message should have to show in the custom screen which we have provided to the customer.
    We are aware of mail recipient list option. Please suggest further options
    Many thank sin advance.
    Regards,
    Sakthivel S

    Hi Appana,
    Yes, we can identify any screen changes from sy-datar. It is set when I make any changes in the custom screen also. But I dont want to give a pop up every time I leave the custom screen. I want to give raise a pop up for saving the delivery document just like any other SAP screen (For eg. SAP Screens do not give a pop up when we move from one screen to another screen, but it gives a pop up if we try to do a subsequent functions like picking without saving the changes in delivery).
    Thanks
    Anil

  • Show the drop down list of variant on the selection screen in ALV reports

    Hi,
    i have a alv report when i execute this display will come and then i click display layout it save as a variant on the selection screen and when i go back to selection screen and press f4 on the display variant its show the drop down list of varient.
    can u send me some code for this functionality...its very urgent.
    thanks!
    Vipin

    Hi,
    try inserting this code apropietly in you program. (1 parameter + Initialization + At-selection-screen + 2 forms)
    START HERE
    PARAMETERS: pa_vari TYPE disvariant-variant.
    INITIALIZATION.
      g_repid = sy-repid.
      CLEAR e_variant.
      e_variant-report   = sy-cprog.
      e_variant-username = sy-uname.
      CALL FUNCTION 'REUSE_ALV_VARIANT_DEFAULT_GET'
        EXPORTING
          i_save     = 'A'
        CHANGING
          cs_variant = e_variant
        EXCEPTIONS
          not_found  = 2.
      IF sy-subrc = 0.
        pa_vari = e_variant-variant.
      ENDIF.
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR pa_vari.
      PERFORM alv_variant_f4 CHANGING pa_vari.
    *&      Form  ALV_VARIANT_F4
    FORM alv_variant_f4 CHANGING pa_vari.
      DATA: l_exit(1) TYPE c.
      CALL FUNCTION 'REUSE_ALV_VARIANT_F4'
        EXPORTING
          is_variant       = e_variant
          i_tabname_header = 'ANYTHING'
          i_save           = 'A'
        IMPORTING
          e_exit           = l_exit
          es_variant       = e_variant
        EXCEPTIONS
          not_found        = 2.
      IF sy-subrc = 2.
        MESSAGE ID sy-msgid TYPE 'S'  NUMBER sy-msgno
                WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      ELSE.
        IF l_exit = space.
          pa_vari = e_variant-variant.
        ENDIF.
      ENDIF.
    ENDFORM.                               " ALV_VARIANT_F4
    END
    Hope iy helps!
    Alfonso

  • In Mail, I can see the list of messages on the left but the message that is highlighted doesn't display on the right.

    Where is my mail message?  The list of emails with preview is on the left, but the pane on the right only contains the sender and subject, no content.

    Try turning the account off and on : Settings > Mail, Contacts, Calendars , then tap the account on the right, slide Mail to 'off', exit settings and go back into the Mail app, and then go back to Settings and slide Mail back to 'on'
    If that doesn't work then try closing the Mail app completely : from the home screen (i.e.not with the Mail app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Mail app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
    Also do a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • Pop up message on the variable screen in portal when report is run

    Hello
    I have a requirement to pop up a message stating " Date should not be entered before 2010 "on the variable screen of the report if date is entered before 2010 by the user when the report is run.
    Please can someone tell me how to implement this?
    thanks

    Hi Tom,
    The logic could be to include code in CMOD forat variable with ISTEP=2.
    IF I_STEP = 2.
    LOOP AT i_t_var_range into wa_t_var_range where vnam = 'Date Varaible'
    <write condition to check the year entered. First, using function module DATE_TO_PERIOD_CONVERT, extract year from Date>
    <   CALL FUNCTION 'DATE_TO_PERIOD_CONVERT'
            EXPORTING
              I_DATE               = ZT_SDT
            I_MONMIT             = 00
              I_PERIV              = 'Variant'
           IMPORTING
             E_BUPER              = zbuper
             E_GJAHR              = zbdatj this is the year entered
           EXCEPTIONS
             INPUT_FALSE          = 1
             T009_NOTFOUND        = 2
             T009B_NOTFOUND       = 3
             OTHERS               = 4>
    >
    Then check the year for the condition.
    If correct.
    exit.
    else.
    CALL FUNCTION 'RRMS_MESSAGE_HANDLING'
    EXPORTING
    I_CLASS = 'RSBBS'
    I_TYPE = 'E'
    I_NUMBER = '000'
    I_MSGV1 = 'Date should not be entered before 2010'.
    raise again.
    endif.
    endif.
    endloop.
    Hope this helps you.!
    -Pradnya

  • Message at the variable screen

    Hello,
    I would like that message pops up at the variable screen during the execution of the report.
    How can I implement this functionality?
    Thanks

    Hi,
    Use the following Code, don't write in between Case and EndCase, after ENDCASE you write code for I_STEP  = 3.
    See PDF
    https://websmp203.sap-ag.de/~sapdownload/011000358700002765042003E/HowToVerifyVariableInput.pdf
    Re: send message from EXIT_SAPLRRS0_001
    DATA: LOC_VAR_RANGE LIKE RRRANGEEXIT.
         IF I_STEP = 3.
              LOOP AT I_T_VAR_RANGE INTO LOC_VAR_RANGE WHERE VNAM = 'MONTH'.
                      IF LOC_VAR_RANGE-LOW(4) LE 2010.
                           CALL FUNCTION 'RRMS_MESSAGE_HANDLING'
                              EXPORTING
                                I_CLASS = 'RSBBS'
                                I_TYPE = 'I'                     " It will through Warning Message
                                I_NUMBER = '000'
                                I_MSGV1 = 'Pls Enter Year Greater then 2010'.
                            RAISE no_replacement.
                      ENDIF.
             ENDLOOP.
          ENDIF.
    DATA: LOC_VAR_RANGE LIKE RRRANGEEXIT.
         IF I_STEP = 3.
              LOOP AT I_T_VAR_RANGE INTO LOC_VAR_RANGE WHERE VNAM = 'MONTH'.
                      IF LOC_VAR_RANGE-LOW(4) LE 2010.
                           CALL FUNCTION 'RRMS_MESSAGE_HANDLING'
                              EXPORTING
                                I_CLASS = 'RSBBS'
                                I_TYPE = 'E'
                                I_NUMBER = '000'
                                I_MSGV1 = 'Pls Enter Year Greater then 2010'.
                            RAISE Again  " It won't allow user untile he/she give correct values
                      ENDIF.
             ENDLOOP.
          ENDIF.
    Thanks
    Reddy

  • Send a instant message on the SAP screen

    Dear All,
    Plz explain the process of sending an instant messges on the SAP screen (A small window comes with messge on the screen, irrespective of the transaction we are in)
    Hope i am clear i want.
    Regards
    Madhu

    If u have authorisation of sm02 then fine , or else , u can use SBWP , for the same purpose
    Execute SBWP, and create  a new message and while giving the receipient name , also tick the box of of Send Express , it will immediately flash on the user terminal.
    AVS

  • Stuck with a message on the touch screen - checking device

    This is an officejet 8500 wireless - the computer OS is Vista 64
    The touch screen on the printer is stuck with a message that says "checking device"  I cannot cancel or stop unless I unplug the printer. This occured after a paper jam.

    First, make sure there are no little pieces of paper left in the printer. This document can help you check it out:
    Paper Jams.
    If you still get the message on the screen, pull the power cord out while the printer is turned on. Wait 15 mseconds. Hold down the # and 6 keys on the front while you plug the power cord back in. This should reset the printer and, with luck, will clear the message.
    I am an employee of Hewlett Packard.
    - - Please mark Accept As Solution if it solves your problem so others can more easily find the answer - -
    - - Please click the Kudos star if you would like to say thanks - -

  • Need help in displaying error message on the same screen

    Hi Experts,
    I have written a report which gets called from IW52 by clicking one of the action items. Now in my report when I am trying display an error message it is getting displayed at the bottom of a blank screen. My requirement is to display it at the bottom of the IW52 screen, so that user can rectify the error.
    Please help.
    Regards,
    Sambaran Ray.

    Hi,
    Probably you need to find a way to enhance the standard code.
    But make one thing sure that the code (included bu you) gets fired only when that specific report is being executed. Else it may harm the standard functionality.
    Hope this helps you.
    Regards,
    Tarun

  • Screen icons are huge.  I can't read my text messages and the whole screen page won't display.  How do I restore the phone screen to it's natural setting?

    Screen icons are huge.  I can't read my text messages and the screen page won't fully display to view. How do I restore the phone screen to it's natural setting.

    Thanks.

  • HT4623 I do not have the software message in the settings screen

    In the sttings screen I do not have the settings message so that I may upgrade software

    From within the article you linked, scroll down to the section entitled "Update our device using iTunes"

Maybe you are looking for

  • Insert a string at particular location in the internal table

    1. I have an internal table t_text of type bcsy_text , this internal table contains a few lines of HTML code 2. I have a variable w_text of type string , this variable contains some text 3. now the internal table t_text contains text: <!"<font size =

  • ER: Accessing the Current Database Transaction (11g)

    We need to write some additional code to run DML against databese. We need to use a connection object. In ADF dev guidesome recomemnd foolowing code. But this method is needed very carefull use . there is many Poolling problem occurs. In my opinion a

  • Web Services with JBuilder

    I've created a web service with jbuilder.I've deployed it in weblogic server 7. Jbuilder also creates a client jar file necessary where I want to call my web service. Imagine I want to call my webservice from a .NET platform. How I have to do it? I d

  • Create DB Link dynamically in JAVA - Problems

    Hi everyone, I am trying to dynamically create a database link in the database. Now what I am asking is this. When I type in SQLPlus create database link 123... and execute it, the database link is created just fine. BUT when I pass the exact same st

  • Photos on iMovie HELP PLEASE

    Im doing a stop motion video but the photos look black in the window! What can I do?