List of MIGO document in which Excise have not been deducted by the user, which should have been deducted.
Dear All,
While doing MIGO, excise calculation is not been done by the users.
I want the list of document in which excise should have been done by not done by the users.
This would be the ABAP development but I need to know which table while give the correct information.
J1I7 standard report should serve your requriement. There are three radio buttons in the Selection screen. You will have to use them according to your requirement.
If you still want to go with Z report then have used the excise tables MSEG, MKPF, J_1IEXCHDR, J_1IEXCDTL, J_1IGRXREF, J_1IPART1 & J_1IPART2. You will find the entry in the Part1 table if Part 1 is updated and an accounting document in J_1IPART2 table if Part 2 is also posted.
Similar Messages
-
Trying to buy book. iPhoto says I have not filled some of the frames but I have.
I have finished my book and I am trying to buy. A notice is coming up that says some of the frames are empty and will have to be filled.
I have a picture in every frame so what could be wrong?Lindsay,
A notice is coming up that says some of the frames are empty and will have to be filled.
You may have used default pictures, for example a picture background. And you will not see the missing background, if your photo is full page. See LarryHN'S post here:
Re: I am attempting to buy a photo book but it says that I have not filled the photo frames which I have.?? How to circumvent and buy this book? (This is my fifth book and first time with problems.
Also, some of the Themes have captions below the photos. Have you edited all captions? Some of them may still be showing the default entries by Apple.
Compare the Preview of the book with what you are seeing in the Browser, and check for missing photos.
iPhoto '11: Preview a book, card, or calendar before you order or print it
Regards
Léonie -
Ipod 5 has been disabled and i have not synced but know the password. what should i do?
Ok so my ipod was disabled to itunes and I havent synced my ipod to our new computer so i cant put my ipod into recovery mode because i dont have a back up and i don't want to lose anything. I know the password and thats why it is frustrating because all the things i have read say that i have to restart my ipod to factory default. Can apple help me or somthing? i really dont want to lose everything! Any id
You have to restore and thus erase the iPod. It is a security feature.
Disabled
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Forgot passcode or device disabled
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode. -
I set up an apple ID, however I inadvertently made an error in the user ID. How do I fix this?
<Email Edited by Host>It's a really bad idea to post your email address - it's an invitation to spam - and I've asked the Hosts to remove it.
-
I have just received an email asking me to verify if I have used my account to spend 20$ which I have not, I've followed the link and am not sure if this is a hoax ?
What does the email say, and is it personalised (e.g. does it have your name in the email or just something like 'dear customer') ? There are regular phishing emails trying to get account and payment details.
You can view your account's purchase history by logging into your account on your computer's iTunes via the Store > View Account menu option, and you should see a Purchase History section with a 'see all' link to the right of it, click on that and you should then see a list of your purchases. If you are using an iOS device then you can view the last 90 days purchases via http://reportaproblem.apple.com -
I have forgotten my answers to the questions which are asked to identify me, and I am trying to press "send instructions to my e-mail", but this does not work, what should I do?
If the email hasn't arrived after a few hours and isn't in a spam filter, you need to ask Apple to reset your security questions. To do this, click here and pick a method; if that page doesn't list one for your country or you're unable to call, fill out and submit this form.
(113969) -
Following a software update, I can no longer access/authorise music purchased via iTunes from my old Apple ID, which I have not used for 8 years, and no longer have password. Any ideas how I can re-access/recover that music?
Apple ID FAQs > http://support.apple.com/kb/HT5622
-
Hi, i have inserted a dvd in the drive, which has data in it but its showing blank and asking to burn. Along with that its also showing the capacity of the dvd. Its ready to write the disk but not exploring the data on the disk. Please help..
See if this fixit tool can repair it
http://support.microsoft.com/mats/cd_dvd_drive_problems/en-us -
Do we have a way to override the markers which XText use??
The problem is that xtext marker does not propagate its effect to the views
ex : (Syntax errors does not appear on Problems view)Hi Christian,
Thanks for your help, my first problem resolved,
Another issue with the marker, currently i am trying to import files and parse them using the code below
XtextResourceSet resourceSet = injector.getInstance(XtextResourceSet.class);
Resource resource = resourceSet.createResource(URI.createURI(filePath));
resource.load(inputStream, resourceSet.getLoadOptions());
And all of them contains syntax errors.
The issue is the markers did not appear on the files in project browsers, and by opening any one of them in the editor, the markers appears on all of them (without extra parse)
example:
i imported "a.dsl", "b.dsl" and "c.dsl" and all of them contains syntax errors, but no markers will appear in the project browser.
by opening "c.dsl" in the editor the markers will appear in all of them. -
Both my iPod and my MacBookPro connect with my home Wi-Fi but my iPad will not even after entering the passcode. I have tried Full shutdown and tried other Wi-Fi's for which I had the correct passcode. My iPad would not connect. Any suggestions?
Hi! I am having the same problem. What's odd is that a few days ago- the ipad was connecting to the network fine. No changes made. Other devices can connect to this network. I have also been able to connect my ipad to other networks.
I have reset all network settings, reset my ipad, reset the router, hard stop reboot, turn on/off wifi connection. what's interesting is that when i click the arrow next to the network i am trying to log onto- the ip address, router, and dns numbers come up automatically and the router number does not fill in (also- this process takes a long time- at least 5 minutes).
any thoughts? -
I have a Pro that's about five years old. It doesn't have a hash tag on the keyboard which is useless for Twitter. How do I set up a shortcut. Help is useless
Hold on, found it - Alt 3 - thanks to old messages.hello, for the old sync system in firefox 28 and below you also had to sign up with a mail address and password originally - to connect firefox to the old account you would need to have all those three pieces (mail, password & recovery key) available to you unfortunately...
-
If I am using pages and deleted my page by mistake how do I go back? I have not saved or deleted the page.
You have deleted your page, but you have not deleted your page?
Which is it?
If you never saved it it is gone. If you saved it in Lion (OSX 10.7) with Pages 09 v4.1, there should be versions available when you mouse overv the document name at the top of the window.
Peter -
Discoverer Plus 10gR2 not show data when the script of view have package
Hi my friends.
I have a problem with discoverer plus, I don't know is a problem or I'm doing something wrong.
I have a four views, the views containg in the SELECT stament and WHERE clause packages, example:
SELECT d.price,
d.total,
d.min,
d.mx,
TO_CHAR (SYSDATE, 'q') quarter,
d.fid,
k_xdcd_qry.f_xdc_obt_price (d.prod, d.id) --> package
k_xpxpd_qry.f_xpeds_salary_ca_u (
d.prod,
d.id) xp --> package
FROM px_prices_proc c,
xp_sla_max d,
xmp_sla_puc b
WHERE a.prod = b.prod
AND a.id = b.id
AND a.prod = k_xps_tools.f_obt_prod --> package
When I used the views on discoverer plus for construct the report, when execute the query not show data.
Appreciate it if you could help or tell me I'm doing wrong or does not support Discoverer Plus package execution.Hi Tux,
This appears to be a grant issue. Apparently, you have granted execute with respect to this package to the EUL owner or the view would not have compiled. If you have not given EUL owner the grant option, I would recommend doing this as well.
This appears to be an Oracle APPS EUL (tell me if I am wrong). If this is the case, it goes without saying that APPS will need to be granted the execute privilege.
Also, by default, a stored package executes with the privileges of its owner. If your custom package was designed this way, are the objects which it references received the appropriate grant? I assume you tested this, but I am concerned that the line, a.prod = k_xps_tools.f_obt_prod, in the where clause could be resulting in the Null set being returned.
Patrick -
I exported a pages document to word, but was not able to edit the new word document.
i exported a pages document to word, but was not able to edit the new word document.
I have a OSX IMAC Version 10.8.5. I got pages at the same time I purchased this computer. I use a document to write all my passwords. Seems like when I E-mail myself the document from pages, I have not been able to type in the document, it acts like it is locked. I checked all the "lock" and "unlock" fields, and none of them were locked. I notice the document says PDF. How do I correct this? Seems like I've tried everything. If you can help, that would be great!
-
Where I can find the user which confirmed the transport
In SAP you can customize that each transport need to be confirmed by a user before you
can transport it to Production.
We have this fonfirmation aktiv but and I can see in table TMSQNOTES the user which confirmed
but I believe I should see this information also somewhere in Developmentsystem or Produktion ?
I found also table E070* which has a lot of information what time date in which system but I can not see
the user which confirmed the transport.
any help ?Hi Miro,
Open SE09, enter the request number.
Now from menu select goto->action logs.
Thanks,
Mandeep
Maybe you are looking for
-
IPhone 4S does not display call log. "Recents" blank.
My iphone 4s does not record call log in the "Recents". I can not see who called me and whom I called. The list is blank. Please help me to fix it.
-
Skype crashes on hungarian android when contacting...
skype crashes when im trying to contact my daughter, who i talk with the most frequently from my contacts. I can message and call everybody from my contact list, except for her. when tapping her name, skype closes and the option to send a crash repor
-
hi, the ability to backtrace an exception to a line number in oracle 10g pl/sql ,how it is possible can any one help me?
-
Can't Access Home page in another system
Hi All, I had recently installed BO 3.1 and when i tried to access the CMC IP link (http://ct-c8-pc1:8080/CmcApp/logon.faces) from another system it throws an error "Cannot find page:CmcApp/logon.faces". I had open the ports for tomcat 8080 and CMS (
-
How do I connect to a Windows 7 File System from Mountain Lion
I am wondering how to connect via Finder to Windows 7 hard drives.