List of missing links in i-tunes

Lately i synched my ipod with i-tunes and i got a list of tracks that couln't be synched. To link this tracks again i want to make a selection of all track with an exclamation mark. Is it possible to make such a selection and how to???

Hello Rovo1968,
Thank you for contributing to Apple Support Communities. It sounds like you are attempting to sync tracks in iTunes marked with an exclamation point. This indicates those tracks have been moved or removed at some point. It may be helpful to review this article which explains the symbols used in iTunes:
iTunes 11 for Mac: Symbols used in iTunes
http://support.apple.com/kb/PH12106
Exclamation point
Next to a song: The song can’t be located; it may have been moved or deleted.
Next to a podcast: Recent episodes haven’t been downloaded because you have multiple unplayed episodes.
You can collect those tracks into a playlist to isolate them, this article will guide you in finding and repairing those connections in the iTunes library:
iTunes: Finding lost media and downloads
http://support.apple.com/kb/TS1408
Cheers,
BobbyD

Similar Messages

Workflow task list is missing or damaged. SharePoint 2010

SharePOint 2010 Enterprise
Customer created workflows for the annual review of our QPC Emergency Plan.
The document library shows that there is a EP_Review workflow “In Progress” for each section.   However if you click into the “In Progress” link to see the actual progress of the workflow it shows no Visio diagram, it’s just a blank white
space (not even an error message) and under the Tasks section it gives the message:
"The workflow task list is missing or damaged. Please contact your administrator for more information"
I looked in the Task List and there are no tasks showing, which normally does show when we kick off a workflow.
I ran a report on the EP_Review workflow for Cancellations and Error messages and the system comes back with the following error message: "Report contains no Data"
Log says:
3/05/2014 11:58:08.67 w3wp.exe (SLSPW02:0x8DC0)               0x8418 SharePoint Foundation         Monitoring
nasq Medium Entering monitored scope (Request (POST:http://strspdept:80/sites/Compliance/EmergencyPlan/_layouts/CustomizeReport.aspx?ReportId=05c9fc6e-b5bd-44c6-9b22-48d33f3b719a&AssociationId=1585f93e-968f-4008-9d41-28e4d03b03b9&Category=Workflow&List=4cb06049%2Dbe01%2D4e76%2D9e78%2D3faa95c4f06c))
03/05/2014 11:58:08.67 w3wp.exe (SLSPW02:0x8DC0)               0x8418 SharePoint Foundation         Logging Correlation Data
xmnv Medium Name=Request (POST:http://strspdept:80/sites/Compliance/EmergencyPlan/_layouts/CustomizeReport.aspx?ReportId=05c9fc6e-b5bd-44c6-9b22-48d33f3b719a&AssociationId=1585f93e-968f-4008-9d41-28e4d03b03b9&Category=Workflow&List=4cb06049%2Dbe01%2D4e76%2D9e78%2D3faa95c4f06c) eaeae4dc-25b7-479e-bc20-dd98b6fcd778
03/05/2014 11:58:08.67 w3wp.exe (SLSPW02:0x8DC0)               0x8418 SharePoint Foundation         Logging Correlation Data
xmnv Medium Site=/sites/Compliance eaeae4dc-25b7-479e-bc20-dd98b6fcd778
03/05/2014 11:58:08.70 w3wp.exe (SLSPW02:0x8DC0)               0x8418 Document Management Server    Document Management
52od Medium MetadataNavigationContext Page_InitComplete: No XsltListViewWebPart was found on this page[/_layouts/CustomizeReport.aspx?ReportId=05c9fc6e-b5bd-44c6-9b22-48d33f3b719a&AssociationId=1585f93e-968f-4008-9d41-28e4d03b03b9&Category=Workflow&List=4cb06049%2Dbe01%2D4e76%2D9e78%2D3faa95c4f06c].
Hiding key filters and downgrading tree functionality to legacy ListViewWebPart(v3) level for this list. eaeae4dc-25b7-479e-bc20-dd98b6fcd778
03/05/2014 11:58:08.75 w3wp.exe (SLSPW02:0x8DC0)               0x8418 SharePoint Foundation         Monitoring
b4ly High Leaving Monitored Scope (EnsureListItemsData). Execution Time=32.1239873194787 eaeae4dc-25b7-479e-bc20-dd98b6fcd778
03/05/2014 11:58:08.78 w3wp.exe (SLSPW02:0x8DC0)               0x8418 SharePoint Server             OpenXml
0000 Medium OfficePackageLibrary::OpenPackage(app=3, path=C:\Users\TEMP\AppData\Local\Temp\tmpBAE2.tmp, fcm=3) eaeae4dc-25b7-479e-bc20-dd98b6fcd778
03/05/2014 11:58:08.80 w3wp.exe (SLSPW02:0x8DC0)               0x8418 SharePoint Foundation         Monitoring
b4ly High Leaving Monitored Scope (EnsureListItemsData#2). Execution Time=10.6167606926937 eaeae4dc-25b7-479e-bc20-dd98b6fcd778
03/05/2014 11:58:08.80 w3wp.exe (SLSPW02:0x8DC0)               0x8418 SharePoint Foundation         Runtime
tkau Unexpected Microsoft.Office.RecordsManagement.Reporting.ReportEmptyException: Report contains no data.    at Microsoft.Office.RecordsManagement.Reporting.ApplicationPages.CustomizeReport.OKBtn_Click(Object sender, EventArgs
e)     at System.Web.UI.WebControls.Button.OnClick(EventArgs e)     at System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument)     at System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler
sourceControl, String eventArgument)     at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) eaeae4dc-25b7-479e-bc20-dd98b6fcd778
03/05/2014 11:58:08.80 w3wp.exe (SLSPW02:0x8DC0)               0x8418 SharePoint Foundation         Monitoring
b4ly Medium Leaving Monitored Scope (Request (POST:http://strspdept:80/sites/Compliance/EmergencyPlan/_layouts/CustomizeReport.aspx?ReportId=05c9fc6e-b5bd-44c6-9b22-48d33f3b719a&AssociationId=1585f93e-968f-4008-9d41-28e4d03b03b9&Category=Workflow&List=4cb06049%2Dbe01%2D4e76%2D9e78%2D3faa95c4f06c)).
Execution Time=131.764628890724 eaeae4dc-25b7-479e-bc20-dd98b6fcd778
03/05/2014 11:58:09.05 w3wp.exe (SLSPA02:0x1CD4)               0x1F68 SharePoint Foundation         Topology
e5mb Medium WcfReceiveRequest: LocalAddress: 'http://slspa02.corp.questar.com:32843/5d041280466646db9f816a170ae8f6b8/MetadataWebService.svc' Channel: 'System.ServiceModel.Channels.ServiceChannel' Action: 'http://schemas.microsoft.com/sharepoint/taxonomy/soap/IDataAccessReadOnly/GetChanges'
MessageId: 'urn:uuid:8f54c63f-a3d4-4180-b9be-2eefe9ff3495' 01f77dd7-96fb-4f20-b72a-cd736a3354bf
03/05/2014 11:58:09.05 w3wp.exe (SLSPA02:0x1CD4)               0x1F68 SharePoint Foundation         Monitoring
nasq Medium Entering monitored scope (ExecuteWcfServerOperation) 01f77dd7-96fb-4f20-b72a-cd736a3354bf
03/05/2014 11:58:09.05 w3wp.exe (SLSPA02:0x1CD4)
Any Ideas how I can figure out how to resolve this?
Thanks for any input

Hi mikeatquestar,
it seems you may need to check if should the task able to create at your environement,
you may try this at your development environment first:
Saved a task list as a template from a working site collection and moved the template to the problem site collection. Used this template to create a new list, and associated this list to the Workflows task list.
http://office.microsoft.com/en-us/windows-sharepoint-services-help/manage-list-templates-HA010099156.aspx#BMcreate
http://office.microsoft.com/en-us/sharepoint-server-help/copy-or-move-a-list-by-using-a-list-template-HA101782479.aspx
Regards,
Aries
Microsoft Online Community Support
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Only 1 database in my OEM Console list has missing tabs

11.1.0.1 of the OEM Grid Server is installed
I have 20 databases listed.
All databases except one look just fine. The one database is missing the Performance Availability Server Schema Data Movement Software and Support tabs on it's main page.
I saw a Metalink article that indicates I did not use the correct version of OPatch to install the patch but the host on which this database resides has a second database that is showing up correctly in my OEM Console. The same version of OPatch was used to patch both databases and if the Metalink article is talking about the OPatch version used to patch the Agent, then why would one database on the host show up correctly in the OEM console with all the tabs but a second database does not? So I don't think it's OEM agent patching.
Any ideas what could cause only one database on a server to have missing links on the OEM main page?
Back end databases are 11.2.0.3 not that it matters.

Thanks randers4, but that didn't solve the issue. Basically, I need to find a way to wipe my iPhone's sync history. It is trying to sync the ghost files instead of the actual files. If I delete the actual files from iTunes and add them back in, it does sync them to my iPhone, but those ghost files are still in the sync list. Since I don't want to delete the files from iTunes and add back in, I would like to find a way to wipe that sync history. I did what you said as well as opting to not sync music at all, then re-checking the sync music and syncing all over again. Still, same issue.
So, does anyone know a way to get rid of that iPhone sync file so it can start fresh with a new sync list?

Only the number, not the name, is shown in the list of missing calls

When number X calls me I get the contact's name like this:
If I don't answer the call and go to the list of Missed calls, I will only find the number (not linked to the contact). Not the name of the contact.
This happens to contact with many numbers added. Could this be the reason?

Hi,
I am just giving the solution what I have done in my project. Hope this will help:
     DATA: BEGIN OF it_ccode OCCURS 0,
               bukrs TYPE t001-bukrs,
               butxt TYPE t001-butxt,
                 END OF it_ccode.
DATA: wa_ccode like line of it_ccode.
Select Company Code (bukrs) and Text (butxt) from table T001.
SELECT bukrs butxt
from t001
into table it_ccode.
LOOP AT it_t001.
    ADD 1 TO lv_index.
    ls_additional_data-fieldindex = lv_index.
    ls_additional_data-fieldname = 'FIELDNAME_KEY'.
    ls_additional_data-fieldvalue = it_t001-bukrs.
    APPEND ls_additional_data TO additional_data.
    ls_additional_data-fieldname = 'FIELDNAME_LABEL'.
    CONCATENATE it_t001-bukrs '-' it_t001-butxt
    INTO ls_additional_data-fieldvalue.
    APPEND ls_additional_data TO additional_data.
ENDLOOP.
And the form my fields binding is:
$record.FIELDNAME.DATA[*].FIELD
Try this out. Hope this will help.
Regards,
Amit

How to relink missing links that have no extensions

I'm working with files received from another company. All the InDesign files have links listed in the Links palette with no extensions. The actual link files themselves HAVE extensions (mostly .jpg, some .psd, .ai, .pdf, etc.). All the links show up as missing, and when I try to relink them I have to do them all individually, even though all the necessary links are in the same folder (just WITH extensions). I've tried "Relink to Folder" and "Relink File Extension," but because there isn't an extension to begin with, it's just not working. It's really time-consuming to relink them one at a time, since there are about 40 InDesign files that average about 40 links each. Any ideas?

Yes, I know extra periods in the filename is a big no-no. This is another unfortunate aspect of the project. It is the naming convention used for hundreds of links. I have software for batch file renaming, but for this project, I really want to avoid changing the filenames. This is the first of 12 similar projects, all with the same problem, so my hope is to find a solution that will help both now and in the future.
All involved in the project are aware of the problem, and in order to save the budget we're trying to research all options for correcting the files.
John, you seemed to think this is scriptable. I googled and tried a script that seemed to solve a similar issue, but it didn't work out. My coworker is going to see if he can modify the script to adapt to our needs, but in the meantime I think I'll post in the scripting forum. Any help you can offer would be great.
Thanks everyone!

Developer 6i Patch Info - missing links

Developer 6i Patch Info - missing links
The following links from within the metalink patch info section are missing, any help locating
a list of bugs fixed for Forms and Reports, would much appreciated.
"Oracle Forms Developer Release 6i Patch 14: Bugs Fixed [HTML]"
http://otn.oracle.com/docs/products/forms/6idocs/bugfix_p14.html
"Oracle Forms Developer Release 6i Patch 13: Bugs Fixed"
http://otn.oracle.com/docs/products/forms/6idocs/bugfix_p13.html
"Oracle Forms Developer Release 6i Patch 11: Windows Component Versions and Bugs Fixed [HTML]"
http://otn.oracle.com/docs/products/forms/6idocs/bugfix_p11_w.html
Patch 12 is not listed at all?

Hi Grant,
Thanks for your response, information is located at:
Metalink -> Patches -> Advanced Search
Product or Product Family: Developer Reports
Release: Developer 6i
Platform or Language: Microsoft Windows 32bit
Patch Type: Patchset/Minpack
Just to mention again Patch 12 is completely missing from this location.

Issue with missing links dialogue box

When I open up an InDesign document that I've been working on recently several times a dialogue box has opened up asking to update missing links - all the links to image files are on an external drive connected to my Mac and none of them have been updated or altered in anyway or moved, all the links are correct and in place when the document was saved yesterday evening on my Mac's desktop so has anyone any idea why this message comes up? It doesn't happen every day but has happened quite a number of days, the list of links that need updating varies as well from as low as say 9 up to 248 which is nearly all the images in the document and it's a bit of a pain having to go through the document turning clipping paths off then back on so the images display correctly again!
Whilst other people can and do access the external drive to access the image for their own documents they haven't changed or altered the images so there's no reason for them to show up as missing in InDesign, the external isn't turned off at night or during the day or unmounted at all either. The file was originally a Quark file converted into an InDesign one via Markzware's software, that apart I can't think of any reason why this message appears often? Anyone any ideas about it?
TIA

anyone got any other ideas about why some of the picture links are being listed as modified? It's an exceptionally annoying quirk, for the last 7 days the links on a 40 page catalogue the links were all fine, this morning however on opening the document it listed over 100 of the images as modified when nothing has been done to them.
When I actually update the picture links in the links palette, in the details panel for the picture the modification date does not change after updating the links, it's the date that it was placed that does change - not sure if this will be of any help in trying to solve whatever's causing this issue, as mentioned above it's exceptionally irritating that it happens and is something that's putting other people off using InDesign over Quark as Quark doesn't seem to suffer this problem, and it would be worse if it happened on some of the other catalogues we do as they're 80 - 100 pages in size!

Update Missing links

I would to batch the process of changing document to inches & update all missing links, save & close. The images are located in a folder in another volume. The script is changing document to inches but it is not updating the missing links. In what part of the process I'm failing? I see --> error number -1708
set source_folder to choose folder with prompt "Select folder containing Indesign Documents"
tell application "Finder" to set theFiles to files of source_folder whose name extension is "indd"
set myFolder to choose folder with prompt "Select the folder containing the graphics you want to update"
tell application "Finder"
set myFiles to every file of folder myFolder
end tell
repeat with oneFile in theFiles
tell application "Adobe InDesign CS4"
set user interaction level of script preferences to never interact
activate
set myDocument to open (oneFile as alias)
tell myDocument
--++++++++++++++++
tell view preferences
set ruler origin to page origin
set horizontal measurement units to inches
set vertical measurement units to inches
end tell
end tell
tell document 1
set theLinks to (every link whose status is link missing)
repeat with i from 1 to count of theLinks
set thelink to item i of theLinks
set theName to name of thelink as Unicode text
set newpath to (myFolder as Unicode text) & theName
try
relink thelink to newpath
end try
end repeat
end tell
close myDocument saving yes
end tell
end repeat

anyone got any other ideas about why some of the picture links are being listed as modified? It's an exceptionally annoying quirk, for the last 7 days the links on a 40 page catalogue the links were all fine, this morning however on opening the document it listed over 100 of the images as modified when nothing has been done to them.
When I actually update the picture links in the links palette, in the details panel for the picture the modification date does not change after updating the links, it's the date that it was placed that does change - not sure if this will be of any help in trying to solve whatever's causing this issue, as mentioned above it's exceptionally irritating that it happens and is something that's putting other people off using InDesign over Quark as Quark doesn't seem to suffer this problem, and it would be worse if it happened on some of the other catalogues we do as they're 80 - 100 pages in size!

I am trying to reset my security questions but the email listed is missing a letter.

Anyone know how to reset security questions if the email listed is missing the a in "yahoo"? My ID is correct but not the email address associated with security questions and I don't see any way to change the email.

Click here for information. If you can't reset them through the method described in that article, contact the iTunes Store staff via the link in the 'Additional Information' section.
It isn't possible to change the rescue email address without correctly answering two of the questions. Nobody on these boards can reset them for you.
(96538)

InDesign Cs4 Missing Links

SO i have been reading around this discussion forum and havent quite found the answer im looking for.
I am not very familiar with InDesign. Ultimatly someone made a webpage for us and i want to be able to transfer it over to Dreamweaver..which i am very familiar with.
I have the file already designed. All files are on the local machine.
WHen i open the file up, this is the error message i get:
This Document contains 19 missing links to sources that are missing. You Can find or relink the missing links using the links panel.
My question is this:
1) is there a way to identify which links are missing?
2) where is the links panel on the menu bar?
Thanks for your help and Patience.
I will admit, i am very much a amature with InDesign

The names of the missing links will be listed in the links panel, which you'll find by Window > Links.
If you really do have the files, you'll have to select them in the links panel and relink, directing ID to the correct location.

List of missing images?

RoboHelp HTML 2002.
Is there any way to generate an automated list of missing
images from a project? I'm interested even if a third-party
application is required.
The only way I'm aware of is to open each image folder
individually and scroll down thru the thousand images to look for a
little red X on an image. Inefficient and error-prone for sure.
Is there any better way in this version of RH HTML that I'm
missing?
Thanks.
JoeC

Hey Joe -
I like
Xenu. It
creates a list of all broken and working links, and the price is
right (free).
I also like their stand on Scientology:
http://home.snafu.de/tilman/index.html#cos

Delete missing link from AI file

How do I delete a missing, unwanted linked file from an AI file? The referenced link is completely gone and is not needed. It can't be relinked or removed since it no longer exists. It is has been a phantom for as long as I have been using the AI file and I would like to clear the "Could not find the linked file" pop up every time I load the AI file. Any suggestions?

This is the method I received from Adobe:
> After opening the file, select one of the missing linked files. Click
> the "Linked File" hyperlink in the bar under the menu. A dialog will pop
> up listing linked files, missing ones with a red cross. If you layer's
> panel is open, you can go through the missing linked files by using the
> "Go To Link" button at the bottom of that dialog, select the linked file
> in the layer's panel and use its trashcan.
>
> Rinse and repeat.
Worked for me. BTW the Illustrator file I was working on (and which I did not create) had more than 250 linked files, which I deleted one at a time according to the method. So it's clear why it would be advantageous to have a "select all broken links" / "delete all" option.

Mystery Missing Link

Everyone,
I have what I hope to be a simple issue. I have an InDesign CS2 artboard which is reporting a missing link that I cannot locate. I have checked the master page as well as all layers. When I select the "Go to link" button, nothing happens. The link information has nothing listed in the "Page" field.
I've also tried relinking to another PDF, in hopes that I could then delete it, but nothing happens when I select Relink.
Anyone have any idea as to how I could locate and remove this missing link?
Matt

If it was overset in a text frame it would have "OV" next to it in the Links Panel. "PB" means it's on the pasteboard.
If the size of the pasteboard changed it may be off the pasteboard.
Try increasing the width (add a new master page add more pages to that master page) and the height in the Preferences.
Check to see if the image appears somehow.
Also Check the Story Editor for any anchors that have a red line beside it, although this should show up in the links panel as "OV" as mentioned earlier.

Missing Links in InDesign CS3

We are using InDesign CS3 and the program itself works good, the problem I'm having is all our data is located on a server and I have replaced the server with a new one, now when we open a document it has missing links and it takes forever searching for \\oldserver\pictures before popping up missing links where you then point it to \\newserver\pictures. My question is why does InDesign use the unc path and not mapped drive letters? Is there a way to fix this for future? Also is there anyway to fix previous short a fixing each and ever missing link? I see CS4 has the option to check links or not but I don't see any options for CS3. Any help would be appreciated.
Thanks,
Tony

I'm not sure what that has to do with it? when opening up a documents it tries to resolve picture links the link pointing to \\oldserver\pictures (that server is no longer running) everything has been moved to \\newserver\pictures when the document finally opens you manually fix the links to point to new server save document then it opens fine the next time. I would rather have the links point to P:\Pictures as apposed to the unc path, the I wouldn't have this issue.

Hi all! I was updating the software on i pad to ios6, update was interrupted(apple update server is unavailable...). iTunes Diagnostics shows that "secure link to I tunes store failed". I use Windows 7 Home Premium 64 bit. Can anybody help please?

Hi all! I was updating the software on i pad to ios6, update was interrupted(apple update server is unavailable...). iTunes Diagnostics shows that "secure link to I tunes store failed". I use Windows 7 Home Premium 64 bit. Can anybody help please?
The following was done so far:
1. Windows Firewall - new rule created for itunes.
2. iTunes - latest version installed.
3. LAN setting : automatic detection of proxy is enabled;
4. iTunes diagnostics shows:
Microsoft Windows 7 x64 Home Premium Edition (Build 7600)
TOSHIBA Satellite L655
iTunes 11.0.2.26
QuickTime 7.7.3
FairPlay 2.3.31
Apple Application Support 2.3.3
iPod Updater Library 10.0d2
CD Driver 2.2.3.0
CD Driver DLL 2.1.3.1
Apple Mobile Device 6.1.0.13
Apple Mobile Device Driver 1.64.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.6.502
Gracenote MusicID 1.9.6.115
Gracenote Submit 1.9.6.143
Gracenote DSP 1.9.6.45
iTunes Serial Number 003FB880034B7720
Current user is not an administrator.
The current local date and time is 2013-04-23 11:01:14.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
Video Display Information
Intel Corporation, Intel(R) HD Graphics
**** External Plug-ins Information ****
No external plug-ins installed.
iPodService 11.0.2.26 (x64) is currently running.
iTunesHelper 11.0.2.26 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name:          {1CB5BBC2-8124-4664-899A-CE0A4683E3B4}
Description:          Realtek RTL8188CE Wireless LAN 802.11n PCI-E NIC
IP Address:          0.0.0.0
Subnet Mask:          0.0.0.0
Default Gateway:          0.0.0.0
DHCP Enabled:          Yes
DHCP Server:
Lease Obtained:          Thu Jan 01 08:00:00 1970
Lease Expires:          Thu Jan 01 08:00:00 1970
DNS Servers:
Adapter Name:          {8140112A-43D0-41D6-8B36-BE146C811173}
Description:          Atheros AR8152/8158 PCI-E Fast Ethernet Controller (NDIS 6.20)
IP Address:          10.5.7.196
Subnet Mask:          255.255.0.0
Default Gateway:          10.5.0.1
DHCP Enabled:          Yes
DHCP Server:          172.18.255.2
Lease Obtained:          Tue Apr 23 10:14:40 2013
Lease Expires:          Tue Apr 23 22:14:40 2013
DNS Servers:          121.97.59.7
                    121.97.59.2
                    121.97.59.3
Active Connection:          LAN Connection
Connected:          Yes
Online:                    Yes
Using Modem:          No
Using LAN:          Yes
Using Proxy:          No
Firewall Information
Windows Firewall is on.
iTunes is NOT enabled in Windows Firewall.
Connection attempt to Apple web site was successful.
Connection attempt to browsing iTunes Store was unsuccessful.
The network connection timed out.
Connection attempt to purchasing from iTunes Store was successful.
Connection attempt to iPhone activation server was successful.
Connection attempt to firmware update server was unsuccessful.
The network connection timed out.
Connection attempt to Gracenote server was successful.
The network connection timed out.
Last successful iTunes Store access was 2013-03-22 10:05:31.
@@@. iTunes IS ENABLED THROUGH THE FIREWALL , even though diagnostics says "NOT enabled"

hours after the first post i somehow got this to work. dont know how, but i do tried the dns clear cache, the clear host file, oh and i did the check automatically detech dns AND THEN se-check it again before i got this to work.

List of missing links in i-tunes

Similar Messages

Maybe you are looking for