List of MM transactions

Dear all,
Where we can see in SAP the list of MM transactions?
I will award points for the answer.
Thanks & Regards,
AR

hi,
u can see the below links for T-codes:-
[http://sap-img.com/materials/important-sap-mm-tcodes-1.htm]
[http://sap-img.com/materials/important-sap-mm-tcodes-2.htm]
[http://www.saptutorials.com/list/1/2,M,ME,xhtml]
For related TABLES, it will also helpful to you in the future:-
[http://www.erpgenie.com/sap/saptech/transactions.htm]
if helpful rewards,
bst rgds,
rajesh

Similar Messages

  • Adding custom message in exception list of F110 transaction without adding payment block

    Hi All,
    My requirement is to add custom message in exception list of F110 transaction based on certain fields validation without adding payment block .
    I tried using BTE 1820 where I can add my validation but am not able to add the custom message in exception list.
    Thanks,
    Mihika.

    Hi Raymond,
    Thanks for your reply.
    I did checked the document and tried giving the S and I message in my BTE with trace option checked on Additional log screen.
    But Success and information message doesn't showed in Exception List.
    If I set the Error message the Proposal gets cancelled and I can see my error message in log. (We don't want this option as in this option proposal is not getting created)
    If I set the Payment block I can see that logged in exception list. But we don't want to set the payment block but the message should appear in exception list.
    I added the message using simple message statement. Will you please advice if any other way to add the message other than using the MESSAFE statement.
    Thanks,
    Mihika.

  • List of bank transaction

    hi experts
    i m going to design one customise report "list of Bank Transaction " no matter what sort of transaction has made .. it would reflects in bank statement. credits and debits both .. here i would liet to tell you that we didnt set our cash management module yet .. otherwise my this requirment is worthless , we can handle all the requirment from there .. but right now the cash management module not setup... so i have to make it customise ... well help he out what is the best stratagy to design this report .. and tell me the stright path where i should work on .. i mean .. i know GL_JE_LINES is the table where each and every transaction record but ... but related to the bank ... and suppler and customer .. how can we get related or what is join condition .. give me an idea where should i found all the information ....
    regrds
    Anwer

    Hi,
    Your accountants can tell you the accounts that hit the bank account, from there you get the rows from gl_code_combinations and join to gl_je_lines (to gl_je_headers and gl_je_batches) to get all the info.
    If you're talking about drilling back to the subledgers (AP, AR..) to get more information than that recorded in the GL, then its a different story, but similar concept applies. Find out what accounts hit the bank in each subledger and query for each subledger. There are a couple of blogs out there with info on GL drill to subledger.
    Regards,
    Gareth
    Blog: http://garethroberts.blogspot.com/

  • Error in creating invoice list from VF21 transaction

    Hi,
    i am craetin a sales order fro VA01 transaction and for the perticular sales order number I am generating the billing document number.when I take this number and try to create a invoice list from vf21 transaction,it gives an error message as no invoice list can be created.and the processing status of the document becomes invalid.
    what can be the reasons?plz sugges....

    Hello all,
    We are facing the same issue.  While creating ZMHF (custom Urgent Change) users "sometime" receive error "There is no active task list in the associated project"
    Hi Mateus , the document is you mentioned is currently expired / unavailable.  Can you kindly upload the same again please?
    Thanks in advance,
    Shaji Narayanan

  • List of Enjoy transaction codes in FI

    HI All,
    Kindly provide me with a list of Enjoy transaction available. I need documents or OSS note provided by SAP.
    Example: Note number 310485
    Thank you,
    Ethiraj

    Hi Ethiraj
    As Finance is so wide the list may be very large.
    the enjoy transactions came in version 4.6 - which is nearly 10 years old now, so most SAP users will know the common ones such as FBL3N, FBL5N - FS10N, FBL1N - FB60 & FB70

  • Defult price list in inventory transactions

    Hi all,
    Do you know how can I set defult price list in inventory transactions?
    The Documetns are:
    Goods Receipt
    Goods Issue
    Inventory Transfer
    Thank you for your help
    Liat

    Hi Johan,
    I don't want to use the DI, I want to use the UI.
    When the user open the Goods Receipt doc he gets the "Last purchase Price"  and then he choose (manualy) the "Last Evaluated Ptice". I need the user to get by defult the "Last Evaluated Ptice".
    Is it possible?
    Thank's
    Liat

  • Listing up business transactions from Account's View

    Hie, When we Open Ship to party from IC Web, We have Assignment block "Quotations" at IC WEB from Accounts view. But it does not pull any quotations.
    But it does pull for sold to party. I have checked SPRO settings for Customer Relationship Management->Master Data->Business Partner->Specify Display Options for Business Transactions and I maintained Area = QU.
    But i still cant see Qutation list from Account's VIEW.
    Can anyone advice me please? where i can make settings for Sold to part , ship to party etc??
    thanks and regards,
    Dinesh.

    Hi,
    this is something which you can´t change by configuration.
    You have to do a small UI-development.
    Open your component / view in tx bsp_wd_cmpwb.
    I guess in your case the component is BP_BPBT and the view is AccountQuotationsOV.
    You have to go to the context node.
    Here please check the coding in ON_NEW_FOCUS and redefine it according to your needs.
    Kind regards
    Manfred

  • Edit drop down list in SHD0(transaction variant)

    Hello all,
    How can we control the values displayed in drop doen list using transaction variant? i am using SHD0 to create a transaction variant and want only few values to be dispayed in drop down list instead of all the values in orignal transaction.
    Thanks
    Arjun

    As far as I konw, you can not.
    You can edit the properties (Visible/Invisible, etc ) but not restrict the values originally displayed.
    Regards

  • What are all the ways that can add fields in the output list of FBL3N transaction?

    Hello dear experts,
    There is this transaction FBL3N, which you might be aware of. Now, the requirement is to add 4 new fields in the output list of the standard program.
    The fields are:
    NAME1   KNA1
    LOKKT    BSEG
    USNAM   BKPF
    TXT50      SKA1 -> SKAT
    Please tell me how to do this apart from implementing the note 310886. What are the other ways?

    I agree, start reading 984305 - Line item: Definition of special fields (T021S)
    Then for non BSEG/BKPF fields, better use BAdI FI_ITEMS_CH_DATA (1323512) and not the good old BTE 1650, the BAdI will be called once with the full internal table with special fields already filled, when the BTE will be executed for each and every record without special fields, so harder to optimize, and may require access to BKPF/BSEG for missing fields.
    Regards,
    Raymond
    PS: Did you use search tool, there are already many discussions/threads on this subject.

  • Display One time customer list and its transactions

    Dear,
    When we use one time customer in sales order and invoice, we'll get an additional pop up window where we can input name and address of the one time customer.
    Where can i get the table they get stored?
    If i want to see the one time customer report as well as customer report in fbl5n, what t-code that i can use?
    Thank you

    Dear,
    I can see the one time customer list (added from additional pop up window) in BSEC...:)
    What do u mean with this statement :"Here you can add table BSEC and field XCPDK(One-time account), once you add this field in the table, the field will be displayed in the change layout option of FBL3N"
    Does it mean that i have to add "a field" in "the change layout option" when i run the transaction of FBL5N or FBL3N?
    What field is that? because i didn't find any field of "one time customer as displayed in BSEC"  in "the change layout option".
    Thank you...:)

  • Vendor list - not get transaction from last three years

    Dear Sir,
    Can we have a list of vendor which are not get transaction from last three years ?
    Vijay Vadgaonkar
    SAP MM

    either you write a z-report
    or you download all vendor numbers from LFA1 table
    then run MC$4  transaction for analyzing period of last 3 year.
    download the vendor numbers from this report as well.
    Finally compare the both download (easiest with VLOOKUP formula) to find the delta, which are the inactive vendors.
    However, these are the inactive vendors from purchasing point of view only.
    vendors like restaurants and customs and tax authorities may only have financial postings and never purchasing activities.

  • Adding field with drop down list to Opportunity transaction

    Hi All,
    I want to add a field from one of the Z table to the opportunity transaction Using EEWB. I have added the field but my problem is that the field should be drop down list with values coming from the Z table.
    Please help me if in case if you have idea or any relevant note or document.
    Thanks in Advance
    Gaurav

    Hi Gaurav,
      Go to your development package with your EEWB extension, look at function group like ZCRM_BTX_EEW_UI* and here you have you screen, your pbo, your pai.
      Modify with the same logic of program demo in your field.
    Regards.
    Manuel

  • IDOC for listing/exclusion conditions (transaction VB01)

    Hello,
    we need to export the conditions for listing or exclusion entered in transaction VB01 (tables KOTG900 ff)  to an external sales order system. Does the system provide an idoc for this purpose?
    best regards
    Rainer Fischer

    Check OSS  Note 863767 - FAQ: Listing/Exclusion. Per point 6,
        6. Question: Can the table contents of material listing and exclusion be distributed to other systems by means of IDocs?
                  No. In the SAP standard system, there is no IDoc distribution of conditions for the usage 'G' (listing/exclusion).
    Regards,

  • Changing Date Format in ALV List for VKM1 transaction

    Hi All,
    I have to change date format to MM/DD/YY in the ALV list display of VKM1 transaction. There are user exits available.
    I am trying to use EDIT_MASK option of the field catalog.. Without changing the code, I give value as __:__:__ or MM/DD/YY in the EDIT_MASK field of the fieldcatalog during DEBUG. Just before the RESUSE_ALV_LIST_DISPLAY is called.. but it is NOT showing any change in the display.
    Please advice any alternate way to do the same.
    Thanks a lot.

    Hi,
    If u`ve access to User parameters, try tcode SU01 and give ur user name in the first parameter. Navigate to the defaults tab and you can find options for Date display and decimals display. Now identify the date format to your liking and change the same. From the next logon in ur user name, changes are reflected on your reports.
    Reward points if my answer is worthfull.
    Regards

  • Activation of "Attachment List" in VF02 Transaction

    Hi,
    When i go to VF02 (Change Invoice) transaction, i find that in the Menu drop down the 'Attachment List' is not activated.
    Can someone advise how i can enable the same.
    Thanks,
    Safi

    Hi ,
    The Attachment List will only be activated once you attach some files to the document.
    To attach the file , click on Services for Attachment > Create > Create Attachment .
    Once the file is attached , the Attachment List will be activated .
    Hope it helps
    SJ

Maybe you are looking for