List of photos and their collections
Is there a way to print or view a list of all imported photos and the collections that they belong to? Right clicking on each image to view this type of info is pretty cumbersome.
Well, the basic need for this feature is because I bracket my shots a lot. When I do an import, I import all and then delete the obvious that I don't want to keep. The remaining shots (usually shot within fractions of seconds of another) are borderline. I keep those. Sometimes I end up with two very similar shots in multiple collections, but they were shot milli-seconds apart.
If I make an update to a specific shot that is milli-seconds or so different than another, then the one that is a millisecond away is not updated. I would like to be able to update the same shot at the same time. My request is based on a desire to identify the one that is a milli-seconds different, delete it and then add the primary one to the collection so that all can be updated at the same time. Does that help?
In the Grid view, with "All Photographs" selected and photos sorted by capture time, these photos that are milli-seconds apart should be grouped together. You can make these changes to your photos in this grid view. Your changes to the collection status of photos has to be done one-by-one (or group by group). When you are looking in Grid view, you make the necessary changes to this group of photos that are milliseconds apart by updating the photos, moving the proper photos to their collections, and then deleting the ones you don't want. I simply don't see any benefit of obtaining a list, as this doesn't seem to give you any advantage over what I just described.
Similar Messages
-
Report to list all computers and their collection membership
Hi
I am currently working on a site where direct membership is used for collections but a need has arisen to move to AD Queries.
I have created a simple powershell script that creates groups based on the contents of a csv file and another script which populates this with the members listed in another csv file.
To help speed up the process is there a way to generate a report that lists ALL Computers and their Collection membership?
The only reports I seem to find that are built in require an inputted value of either computer name of collection ID. I simply need a report that lists Computer Name is column 1 and Collection Name in column 2 for all computers and all collections.
Many Thanks,
Matt Thorleyselect
FCM.Name,
C.Name
from
dbo.v_Collection C
join dbo.v_FullCollectionMembership FCM on C.CollectionID = FCM.CollectionID
Thanks to Garth for original query. I just modified it :)
Anoop C Nair (My Blog www.AnoopCNair.com)
- Twitter @anoopmannur -
FaceBook Forum For SCCM -
I have 2 Macs - an iMac which holds my main iPhoto library and a Mac Book Pro which holds a subset of the library. How can I transfer photos and their metadata from the main library to the smaller 1 on the Mac Book Pro?
Link the two Macs together and use iPhoto Library Manager
Regards
TD -
List of users and their decimal notation settings in SAP system
Hi all, i'm looking to get my hands on a list of all users in our SAP system and their respective decimal notation settings? I know that these can be mass changed using SU10 however I am unable to determine how to view a list of users and their settings.
Thanks,
JamesHi James,
You can find many useful reports, in SUIM transaction to see user details, but not decimal notation field. I don't know a report to show decimal notations, but as a workaround, in order to see the decimal notation, you can check "USR01-DCPFM" by using "SE16".
Best regards,
Orkun Gedik -
Thru OEM get list of queries and their schemas that accessed my objects
Hi,
I have a list of objects on my schema and i need to track the list of sql queries by different users that accessed by object during this time period.
i haven't enabled any auditing yet.
is there any way i can get that list of queries and their schemas that accessed those particular objects during a particular time period through OEM.
Can someone guide me please.
Thanks in advance.
Philip.create a name property in your class and assign a name property to your instances (either in the contructor) and/or using getters/setters. (you'll need a getter anyway.)
-
How can I list all users and their DEFAULT tablespace?
How can I list all users and their DEFAULT tablespace?
PeterPeter, the following short article that lists the most heavily used Oracle rdbms dictionay views might be of interest based on your question:
How do I find information about a database object: table, index, constraint, view, etc… in Oracle ? http://www.jlcomp.demon.co.uk/faq/object_info.html
HTH -- Mark D Powell -- -
List of tcodes and their purpose starting from SE71 to SE84
Can i get the list of tcodes and their purpose starting from SE71 to SE84.
hi,
u can find these details in table TSTC.
SE71 SAPMSSCF 1100 4 SAPscript form
SE72 SAPMSSCS 1100 4 SAPscript Styles
SE73 SAPMSSCO 500 4 SAPscript Font Maintenance
SE74 SAPMSSCU 1 4 SAPscript format conversion
SE75 SAPMSSCC 1 0 SAPscript Settings
SE75TTDTGC 2 SAPscript: Change standard symbols
SE75TTDTGD 2 SAPscript: Display standard symbols
SE76 SAPMSSCG 1100 0 SAPscript: Form Translation
SE77 SAPMSSCG 1200 0 SAPscript Styles Translation
SE78 SAPMSSCH 2000 0 Administration of Form Graphics
SE80 SAPMSEU0 2 Object Navigator
SE81 SAPMSEU10 1000 84 Application Hierarchy
SE82 SAPMSEU9 1000 84 Application Hierarchy
SE83 2 Reuse Library
SE83_START RLB_BROWSER_START 1000 80 Start Reuse Library
SE84 RS_INFOSYSTEM_START 1000 84 R/3 Repository Information System
reward points if hlpful. -
How to find out list of users and their access on Sharepoint
Hello Everyone
How can i find out list of users and what access they have on SharePoint site? I want to create table with list of the users and their access?
Thanksyou can get the report using below powershell scripts. first one gives list of users in a site collection level.
The second link generates the permissions reports for each user.
http://techtrainingnotes.blogspot.com/2010/12/sharepoint-powershell-script-to-list.html
https://sp2010userperm.codeplex.com/
My Blog- http://www.sharepoint-journey.com|
If a post answers your question, please click Mark As Answer on that post and Vote as Helpful -
List of variables and their classes from working script?
I have a working script that has many variables containing finder references and file path descriptions as strings or Unicode text. It is not easy to remember what these variables refer to. Is it possible to get a listing of all of a scripts variables and their respective class?
The only way I've seen to do this is with Script Debugger, an alternative script editor that has significant debugging tools such as breakpoints, stepping, variable inspection and more.
-
Cisco Prime - extract list of hostnames and their serial numbers.
Hi all,
is there a way of extracting a list of hostnames ( for devices in EMEA ) and their associated serial numbers from Cisco Prime and into say a csv file?
Many thanks,
PaulHi Paul,
if you have Prime Infrastructure then run the below report :
Report > Report Launch Pad > Device > Detailed Hardware > Detailed Hardware Report Details
If Prime LMS then :
Reports > Inventory > Detailed Device
Hope it will help
Thanks-
Afroz
***Ratings Encourages Contributors *** -
BI Report - List all users and their assigned roles
Hello,
i need a report, which lists me all users and their roles.
Which table stores this membership information about the users?
USR or UGP does not have any valuesHi Reynaldo,
You can go to SE16 -> table name "AGR_USERS" and see the records for all users. Arrange them in ascending order by name and you will get the report what you have mention above.
Download it and put it in EXCEL.
Best Wishes.
Kumar -
Get the list of reports and their ODBC details
Hi :
We have around 20,000 objects hosted on our BOXI R2 SP3 environment. May be around 17000 of these are reports. I have a few questions >>
1. Is their a way to get the list of all the reports and their ODBC details. I tried running the following query 'Select Top 20000 SI_ID, SI_NAME, SI_PROCESSINFO.SI_LOGON_INFO From CI_INFOOBJECTS Where SI_PROGID = 'CrystalEnterprise.Report' and SI_INSTANCE = 'False'' in the query builder. But it times out.
2. Will running this query using the sdk affect the stability of the environment.
3. Is there a way to spilt the query into 4-5 batches to get 3000-4000 records at a time.
4. Can we get the min(SI_ID) and max(SI_ID), how ?
Regards,
Abhijit SanasYou can try batching on SI_ID, doing something like:
"Select TOP 1000 SI_ID, SI_NAME, SI_PROCESSINFO.SI_LOGON_INFO From CI_INFOOBJECTS Where SI_PROGID = 'CrystalEnterprise.Report' and SI_INSTANCE = 0 and SI_ID > " + max_si_id_value + " ORDER BY SI_ID ASC"
then update the max_si_id_value each batch. SI_ID and SI_PROGID are indexed properties, so they help.
Sincerely,
Ted Ueda -
Script to list the users and their privileges in a database
Hi Team,
Can someone provide me a script that list all the users and their privileges in a database?
DB version:11.2.0.2
OS:AIXOsama_mustafa wrote:
Why you create your own script
SELECT * FROM USER_SYS_PRIVS;
SELECT * FROM USER_TAB_PRIVS;
SELECT * FROM USER_ROLE_PRIVS;
That won't tell him what privileges a user has via a role. It will only tell him what privilges were granted directly, and what roles were granted directly. But those roles have privileges, and may have other roles, which have still more roles and privs, etc. It's a recursive issue and a simple select from user__privs won't get it.
Pete Finnigan has a good script for reporting the entire picture. I leave it as an exercise for the student to use google to find it. I have already given all the information needed to complete that exercise. -
List of customers and their MasterCodes
Hi Everyone
Is it possible to get a list of the customers I have in UK Field Services LoB
and their MasterCodes
I have found that some customers are on the wrong MasterCodes and my reports are incorrect
Thanks
SuperYour question is vague in terms of which product and release are you using which encountered this issue. We need more information to begin to answer your inquiry. Please resubmit your question with additional details if you still need assistance.
Best regards,
[Jeffrey Holdeman|https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/jeffrey+holdeman]
SAP BusinessObjects
Enterprise Performance Management
Regional Implementation Group -
List all users and their own roles.
Hi everybody!
I have to make a list of all sap users and their own separated roles by user. There are any transaction to do it? The SUIM transaction gives me a sap user and their own roles, but if I try with a lot users It gives me all the roles that are using those users but don't give me the roles for each one.
Thanks a lot.
Best regards.Hi Reynaldo,
You can go to SE16 -> table name "AGR_USERS" and see the records for all users. Arrange them in ascending order by name and you will get the report what you have mention above.
Download it and put it in EXCEL.
Best Wishes.
Kumar
Maybe you are looking for
-
Problem with my ibook...
The screen on my ibook keeps going out and it keeps making weird noises. I have to keep turning it off and on just to get it to work for 2-3 minutes before the screen dies on me again. I'm scared to think it may be the logicboard. The worst part? My
-
Hello All, I'm getting an 'IndexOutof Bound' error on the 'Show Overview' Link of of ESS >Payments and Benefits. Can anyone help with this? Regards, Kabir
-
Redhat server/windows client
Hi, I have installed oracle 9ir2 on redhat 8 and have installed Oracle 9ir2 client on windows 2000 I have started the TNS listener on the server but when i try to configure the client and test the connection it cant connect I could very well be missi
-
LaserJet CP1525nw color - does not print on HP glossy laser brochure paper
Hi, For some strange reason my LaserJet CP1525nw color does not print on HP glossy laser brochure paper. It smears the color powder and makes lines on the paper. Does anybody know the reason for this?
-
I have set up a site with an external style sheet, my client is complaining about the split second when the page is viewed before the style sheet kicks in, (an un-styled webpage) . Does anyone know a way around this? They are demanding it to be amend