List of ports for all the WCI services

I'm trying to figure out why collab cant talk to the CNS, and I see in the log:
"Attempting to connect to teh notification server at host=blah (udp heartbeat port=28282 ..."
aarg. where is the configuraiton for this? can't find it anywhere.
Has anyone created a complete list of source - destination ports for all the new components?
I"m going to start writing them down here:
http://wiki.oracle.com/page/Webcenter+Interaction+Deployment

Hi Joel,
I have had a similar problem before but I am not sure if it is related to this, if you take a look inside the PTHOME/settings/configuration.xml file you will find some extra parameters which are not listed in the configuration manager for collab.
I suggest trying some of these settings to see if they coincide with your issue. The problem I had before was when a port that was not even listed in the config manager was blocked by my firewall.

Similar Messages

Any way to open port for all computers?!

Hey folks,
I'm using an Airport Extreme as the router for a small network. It's been performing fantastically.
But, something I can't figure out is:
Is there any way to open a port for all the computers I have hooked into the Airport?
I can of course open ports per internal IP address, but what I'd really like to do is just open up a slew of ports for all of the machines. This way I can leave them grabbing DHCP-provided, non-static IPs, but they can also get access to the services they need to.
Tried the old asterisk in the host IP field (like "192.168.1.*") but no dice. Actually I can't even find a yes or no answer on if this is even possible...
Thanks in advance!

Sorry, but the AirPorts do not support a feature to forward a port to multiple IP addresses; only multiple ports to a single IP address.

OID for all the cisco network devices

Hello All,
Can anyone provide the list of OID for all the network device with device name for routers,switches, WLC, WAAS etc.
Regards,
ADM

Anshumaan,
the cisco-products-mib is what you're looking for, and should be dowloadable without having a cco account (I believe all of the mibs can be downloaded with an account).
chris

Need JAVA API to list down all the Proxy Services in OSB Console 11g

Hi,
I need a java API to List down all the Proxy Services present in OSB Console for SOA 11g (11.1.1.5). I am in a situation where I cant use python script for the same.
any help will be much appreciated.
Thanks in Advance,
Ravi
Edited by: 899443 on Oct 1, 2012 4:13 AM

AFAIK it is proprietary.
What I do in a similar situation is to form XML for the services, package them into JAR the same way as an import JAR is packaged (creating ExportInfo resource, ...) and deploy with standard WSLT script. Works for simplest services only (direct proxies mostly) but I can also form security, alerts, throttling etc etc etc -- all in one shot.
Out of sheer interest, may I ask you a question? Why do you need to create OSB services from Java?
Vlad
http://vladimirdyuzhev.com

Locate A list of all the Enterprise Services.

Dear All
Where can I find a list of all the Enterprise Services provided by SAP . I have PI 7.1 in my landscape. Can anyone please provide a link or a transaction for locating the entire list of all the SAP Enterprise Services which can be used with PI 7.1
Thanks.
regards
Nilesh.

Hi,
you can find anything or everything from this link.
https://www.sdn.sap.com/irj/sdn/esworkplace
http://esoadocu.sap.com/socoview(bD1lbiZjPTAwMSZkPW1pbg==)/render.asp?sap-params=cGFja2FnZWlkPURCQkI2RDhBQTNCMzgyRjE5MUUwMDAwRjIwRjY0NzgxJmlkPUFGOEZBNEQ4NjRCMDRBNTY4OEY2RDhGNjZBMTlBNDc1JmZyYWdpZD0%3d
You can download Enterprise Services also for your application and use it.
regards
Aashish Sinha
Edited by: Aashish Sinha on Feb 24, 2009 7:57 AM

USELESS ONLINE HELP FACILITIES For all the amazing productivity aids that APPLE offers the world I have to report that their online support service is worse than useless and has recently been the source of immense time wasting and irritation.

USELESS ONLINE HELP FACILITIES
For all the amazing productivity aids that APPLE offers the world I have to report that their online support service is worse than useless and has recently been the source of immense time wasting and irritation.
Incident 1. Since many months attempts to download new and updated APPs produced a response – Apple ID Disabled. I had no time to consult an APPLE Store due to work in distant lands. When I finally visited yesterday I was told that as my IPAD has been reported as stolen, and APPLE in its wisdom had blocked its usage! I am not sure how they became so misinformed and nobody every advised me while with a few swift moves APPLE could have located me by email address or SKYPE.
Incident 2. Once the above anomaly had been fixed I tried to down load a newspaper and diligently input my address, credit card number and personal data. Repeatedly I was advised that my Credit Card was invalid and my postal code was incorrect! Really!
I was left to guess that having moved from UK to the US I should have advised APPLE! Not being told of this requirement brought about a second visit to APPLE Store in the same day to waste both mine and their time with a routine anomaly. How parochial in the context of a globalized world!
In each case I tried to resolve the issues using online access to a help line and by calling by phone at the numbers on the APPLE Website. In each of four separate occasions I diligently went through the routine and ended up with a message that thanked me for contacting Apple followed by a polite ‘Good Bye’!
In desperation I went to an Apple Store for the second time in a day as it is close to where I live when I am not working. On both occasions I was courteously attended to by Apple Staff.
However, my work is usually far away from the US and it is generally many thousands of miles to the nearest Apple Store therefore online help is viewed as imperative if one is to resolve issues away from home.
Why can Apple not provide a clearly marked EMAIL address and Telephone number at a Help Desk with real people to respond to requests for help? It would cost nothing in relative terms and might restore my high level of anti-APPLE sentiment that these two recent events have provoked.
Peter Hanney
Miami, Fl.

Why can Apple not provide a clearly marked EMAIL address and Telephone number at a Help Desk with real people to respond to requests for help?
If that is your question, the answer is at the bottom right of this web page. It is clearly marked "Contact Us" and is the best way, really the only way, to contact Apple.
If there were a publicly posted email address for concerns such as yours, it would be quickly filled with spam in about three minutes, thereby becoming instantly useless to you and everyone else. Apple would need to change it hourly, if not more often. That is also the reason you ought not to post your name, location, and what appears to be your iPad's serial number on this publicly viewable website.
Apple does not respond here and I can find no other questions for your fellow Apple users to answer.

CsrAttachmentUploadDiv part attachment is not rendered SP 2013(Attach file in not working for all the list forms)?

csrAttachmentUploadDiv partattachment is not rendered SP 2013(Attach file in not working for all the list forms)?
Ravi
function ShowPartAttachment() {
ULSopi:
    if (document.getElementById("part1") == null || typeof document.getElementById("part1") == "undefined") {
        alert(Strings.STS.L_FormMissingPart1_Text);
        return;
    (document.getElementById("part1")).style.display = "none";
    (document.getElementById("partAttachment")).style.display = "block"; //problem here

Am also facing the similar problem....any iputs are highly appriciated.
Issue..
1) Defined the attachment type in IMG.
2) Added the attachment type "SFREEATTM" by selecting other attributes---> Attachment Types.
3) Attached the excel file in the design.
See the screen shot below:
The Issue is when testing through tcode nwbc in the inbox the attachment tab is not visible after selecting the particular form.
Please see the screen shot below:
Did i miss any Configuration?? Please suggest...
Regards,
Naveen

REST url to get titles and description for all the lists in HOST WEB.

What should be the REST url to get specific prperties for all the list in host web for SharePoint Hosted Apps.

Hi,
We can use the REST URI below:
http://myAppweburl/_api/web/lists?$select=Title,Description
More information:
How to: Complete basic operations using SharePoint 2013 REST endpoints
http://msdn.microsoft.com/en-us/library/office/jj164022(v=office.15).aspx
Best Regards
Dennis Guo
TechNet Community Support

Issue with the configuration of http xml port for sending the idoc

Hello,
      I am planning to send multiple idocs in a single file using http xml port.
Presently I am trying to send a single idoc, but am having the issue.
I am trying to create a RFC for HTTP XML port of type H i.e. HTTP Connection to ABAP System
In the how to guide for - How Tou2026 Send Multiple IDocs Within One XI Message
( https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/30ea2fdf-f047-2a10-d3a2-955a634bde6b )
the following parameters are defined for the path prefix -
RFC destination of type H (HTTP Connection to R/3 System).
Specify the path prefix as follows:
/sap/xi/adapter_plain/
?namespace=< your namespace>
&interface=<IDoc_Type>
&service=<Sender System>
&qos=EO (or EOIO).
I am trying to use the following prefix -
/sap/xi/adapter_plain/
?namespace=urn:sap-com:document:sap:idoc:messages ( this is the standard namespace of SAP for all the idocs)
&interface=DEBMAS05 (Idoc type )
&service=SNDLS100 ( ECC system name )
&qos=EOIO
On testing the RFC connection, I am getting the error of page not found.
Can anyone please give me pointers for the issue.
Regards,
Mayank

Thanks Barry!!!
Now I am getting a different message.
In RFC...it is giving me the following message ->
Status HTTP Response     204
Status Text     Body is empty
In case of Idoc, the status is till 02...
the error description for the idoc is --
"When transferring the IDoc by HTTP, the return code with the message '500<SAP:Error><SAP:Category>XIServer</SAP:Category><S' has occurred.
The target address was: http://emgeccsnd1:8001/sap/xi/adapter_plain/?namespace=urn:sap-com:document:sap:idoc:messages&interf
Check whether the IDoc can be sent again.
It is unfortunately not possible to determine automatically whether the IDoc has in fact arrived in the target system and the error occurred afterwards"
I am still not able to resolve the issue.
Regards,
Mayank

I purchased a student subscription to Creative Cloud. I got the confirming email. When I attempted to install the aps, kept getting a 30-day trial for all the aps. In the case of Photoshop, it was expired. How do I activate my Creative Cloud?

I purchased a student subscription to Creative Cloud. I got the confirming email. When I attempted to install the aps, kept getting a 30-day trial for all the aps. In the case of Photoshop, it was expired. How do I activate my Creative Cloud?

ChristinaW1111 for information on how to resolve the connection error preventing the active membership from authorizing then please see Sign in, activation, or connection errors | CS5.5 and later. If you have any questions regarding the steps listed within the document you are welcome to update this discussion.

How to update the condition price in the sales order for all the items

Hi,
How to update the condition price for all the itmes in the sales order to carry out the new price automatically through a stand alone program, for all the orders in the billing due list table?
Thanks,
Balaram

Hi,
There is a change in the requirement.
Scenario:
I have created a sales order with some 4 condition types, in that 2 condition types are of class A & B and the other two is of class C. Here I need to update the condition price of class A & B only and the remaining condition types should not get update even though there is an updated price is available.
For the above scenario, I need to write a standalone program. Do we have any function modules to update the price of the single condition in the sales order? Please tell me how we can update the sales order at item condition level.
Thanks.
Balaram

Open ports for all in LAN

Hi, a few days ago I bought a wireless router WRT160n. I want to ask how to open some port for all in LAN(3 clients). For example all in LAN have PeerToPeer application for torrents. I want to open port for example 20202 for all. Now I open port from menu Applications & Gaming->Single Port Forwarding, but I must set port for each user IP address.
Can somebody tell me how to open port for all in LAN without to config for each computer?
Thanks in advance.

Hi gv. I read more about UPnP and the WRT160n User Guide. In section Administration>managment int wrote that UPnP is Enabled by default in my router it is corect. I Setup mu PeerToPeer(eMule) TCP/UDP ports to 20202 and check option "Use UPnP to setup ports". I test and close this port on my router configuration for my computer on "Single Port Forwarding", but in eMule the port is still block. Can you explain why it did not work. For UPnP it says that if Enable it allow users with Windows ME and XP automatically to gonfigure Router ports
Thanks in advance!
Best Regards.

BO 4.0 Advanced Analysis for OLAP - The MDAS service encountered an error.

Hi guru's,
We are running BO 4.0 SP02 Patch 11 with SAP BW 7 and experiencing the following error with Advanced Analysis for OLAP:
"Analysis edition for OLAP
The MDAS service encountered an error."
After you click show details:
"com.crystaldecisions.thirdparty.org.omg.CORBA.MARSHAL minor code: 0x0 completed: No"
I have researched into this and found forums such as:
http://forums.sdn.sap.com/thread.jspa?threadID=2053481
SAP KB 1560100 - BI4.0 Advanced Analysis Web problem: The MDAS Service encountered an error
SAP KB 1661163 - An error is generated when selecting a query or cube in Analysis for OLAP: Error 15
However, none of these have helped our situation too much.
We have rebuilt the windows server 2008 R2 recently, hence the process we followed was a fresh install of BO 4.0 SP02 platform & tools, and then patch 11 on top of these.
Crystal, WEBI's (using the same BICS connections as the AA's) and Dashboards are all working as per expected.
The errors are for every AA including ones with only 2 variable selections (light queries) to ones with many more. Hence it is platform wide for Advanced Analysis.
I have also tried creating new AA using existing BICS, new BICS existing AA, new BICS new AA all with no luck.
We have also created new Adaptive Processing Servers with only the MDAS as a common service, turned on tracing etc but nothing springs to us as to what is going wrong.
Any ideas would be greatly appreciated?
Thanks all,

Hi All,
After conversing with SAP support technicians we have found what is causing this issue.
On the windows servers we have the following installed locally:
- BO platform 4.0 SP02
- BO platform 4.0 SP02 patch 11
- BO client tools 4.0 SP02
- BO client tools 4.0 SP02 patch 11
- Crystal reports 2011 SP02
- Crystal reports 2011 SP02 patch 11
- Crystal reports for Ent SP02
- Crystal reports for Ent SP02 patch 11
It seems that the crystal reports 2011 or cr for Ent was causing an issue in the .WAR files that BOE uses to run Advanced Analysis for OLAP.
After uninstalling the two crystal products and removing any left over cr files in program files on the server, AA for OLAP works successfully in our environment.
The other point after this was i stopped the tomcat and SIA, i renamed the BOE folder under <install dir>\SAP BO4.0\Tomcat6\webapps and restarted the tomcat and then the SIA. In 4.0 when the tomcat is started again it will go and recreate the BOE folder from the BO directories effectively recreating the apps .WAR files under the webapps\BOE folder.
SAP will hopefully document this issue for other clients.
Cheers,

HT3669 I only have a HP printer and why I need to install a file for all the HP printers drivers 590MB??? if normally the size of my file should be 5MB. some one could me help to avoid installation of 590MB for my new mountain lion software???

Hi guys..!!
I would like to know if someone could help on this:
I just have a HP printer (HP Designjet 100) and for some reason I need to install a file for all the HP printers drivers in total 590MB to be able to use my printer in my mountain lion???
If normally the size of my files in the for previous software was more or less 5MB why now i need to install 590?
Some one could help me how to avoid installation of 590MB for my new mountain lion software???
Thanks

If you go to http://support.apple.com/downloads and locate the HP Printer Drivers installer, you will find that it is 473.4 MB (for version 2.11). If you install this, it will install the full set of drivers for every model of HP printer that is supported by the drivers distributed through Apple. The disk space occupied once installed will probably be larger than the download, since the downloaded file is compressed.
On the other hand, if you have an HP printer connected and you use Software Update (or the Update tab in App Store), that should offer you a much smaller set of HP drivers, which are only applicable to your printer (and possibly a few similar ones). These updates are typically only tens of megabytes rather than hundreds of megabytes.
If Software Update doesn't offer you any HP drivers then it either thinks you have the latest drivers installed already, or the printer model is not supported by the drivers available from Apple.
This article lists all of the printer models for which Apple distributes the driver:
http://support.apple.com/kb/HT3669

I pay for upgrading ifindyou and it doesn't work!!!! it clearly says that it tracks only your mobile in the lite version, after you ask the upgrade for all the mobile... can we call this a fraud????

i pay for upgrading ifindyou and it doesn't work!!!! it clearly says that it tracks only your mobile in the lite version, after you ask the upgrade for all the mobile... can we call this a fraud????

Hi,
"A day after the name change became official my built in skydrive app stopped working"
Did you point that SkyDrive changed to OneDrive?
Did you move your OneDrive to another location or change its name?
Please login OneDrive with web-based to check if you could access it successfully.
Please refer to the following article to try the troubleshooter and check the service status:
SkyDrive: FAQ
http://windows.microsoft.com/en-in/windows-8/skydrive-app-faq
Karen Hu
TechNet Community Support

List of ports for all the WCI services

Similar Messages

Maybe you are looking for