List of rejected sales order with quantity and value

Hi,
Is it possible to get the report from VA05 for the list of rejected items with value and quantity ?
Pls help
Thanks,
Vijesh

Dear Vijesh,
VA05 I believe is a very powerful report for doing analysis at order and line item level. If your rejection criterion includes a rejection reason at line item level, yes this list from VA05 can give rejected Sales Orders with Quantity and Value. See the screen shot below.
I selected a list with open dates till date, I can see Sales Order number, Sales Document Type, Item Number, Material, Rejection reason, Quantity at line item level and net price.
However, I am not sure what is the rejection criterion you use in your business and I am not sure if you use rejection reason and hence I would like to hear from you, if this explanation helps you.
Thanks
Nagaraj

Similar Messages

What is the difference between sales order with picking and without picking

hi friends,
i would like to know what is the difference between sales order with picking and without picking.
thanks
skrishnan

Hello,
Picking refers to preparing the right quantity and quality of goods for shipping on schedule as required by the customer.
Once picking is configured, SAP Sd automatically generates picking lists and picking labels which can be tagged to the relevant goods. SAP can be configured to ensure that picked quantity is confirmed before goods are issued. This can be done using transaction code VSTK. In T-code VSTK, picking confirmations can be set, which ensure that goods picked for delivery are in accordance with picking slips.
Picking thus helps in monitoring each item using the picking status. Picking is normally done in SAP SD by a shipping clerk.
Prase

Purchase order with quantity range value

Hi All,
I want to have PO price to be taken from vendor info with quantity based values.
For ex: The vendor has fixed a rate for 500 qty with X rate. and above 500 qty Y rate.
My scenario is i want to raise the PO with this rate. How can i do this?
Note: If i do first PO with 300 qty, then rate it is taking is X*300
Now if i do second purchase order, with 300 qty, then the first 200 qty should go with X rate and remaining 100 should go with Y rate. ie, this purchase order will have combination of X & Y rate.
Please give the solution for this.

hi...
U can perform this pricing by doing some modification in ur conditon type...
In M/06 open ur condition type and under Scale tab...chooose scale type ..here assign scale type "D" i.e. Graduated-to interval sc
And config the scale in purchase-info record..
S Type    s quantity     amount
     to            200               X
                     300               y
then it will calculate : 200X+100y=Z
try this out...
Hope it works,,
Thnks
Edited by: ashish2210 on Jul 20, 2011 3:20 PM

Printout of Changed PO Line items with Quantity and value

Hi SAP Gurus,
I want to have the printout of only those PO Line items with the change in Quantity and Value....
How can i achieve this...
Any config./ Developement...
Plz. suggest....
Rgds,
Navin

Hi,
In config Purchasing->Messages->Output Control->Message Determination Schemas->Define Message Schema for PO, under 'Assign Schema to Purchase Order', if the 3rd indicator from the right 'New message determination process for change messages' is NOT selected, only changes are printed in the changed PO's.
Are you using standard print program and SAPScript?
Also under config Messages->Message Type->Define Message Type for PO->Fine-Tuned Control: Purchase Order, make sure you have operation '2' for PO output type.
Phyllis.
Edited by: Phyllis Waugh on Oct 10, 2008 6:40 AM

List of Rejected Sales Orders

hi ..........
i am prabhakar vatti...........
I need simple code for display sales orders which are rejected..............

Hi..........
i am Amit Gujargoud...........
Write select query from VBAK and VBUP abd check field VBUK-ABSTK (go there with VBAK-VBELN = VBUP-VBELN is salesorder)
If it's C, the order is completely rejected (all items rejected)..........
If it's B, the order is partially rejected (some items rejected).....................
If it's A, the order is not rejected (no rejected items).............................................

Create Sales Order with ES and LORD throws "not an input field"

Hello,
Im am getting the error:: "Field AUART is not an input field"
I am trying to use the enterprise service: PurchaseOrderRequest_In for creating a Sales Order in ERP. I have done the settings under:
- (IMG: Sales and Distribution -> Electronic Data Interchange -> EDI Messages -> Configure EDI Partners -> Convert External To Internal Partner Numbers )
- (IMG: Sales and Distribution -> Electronic Data Interchange -> EDI Messages -> Configure EDI Partners -> Assign Customer/Vendor To Sales Organization Data )
- Customizing transaction WUFWUF -> Transformations , application CL_PUR_PURCHASEORDER_RQ
- SD_01 business function is activated
Now when I send in a message I can monitor the errors in /SAPPO/PPO2 I get a list of errors telling me:
"Field AUART is not an input field" and the same error for 5 other fields. If I debug the method I can see that the table LORD_MAPPING is read. It also looks like the service actually calls program SAPMV45A with screen 4440. This screen does not contain the fields with error. The errors are caught in
class: CL_LORD_OBJECT
Method: DO_IMPORT_MAPPING
Line: 58-72
, due to <field_inpmod> eq '0'. This is the input mode for the screen used.
Any pointers to what I have missed would be greatly appreciated.
Best regards,
Emil Jessen

check function group XVED. Within this function group there are some includes that allows you to change the behavior of SAP while creating the sales order after EDI inbound.
There are the two includes ZXVEDU03 (to add additional data from the IDOC to the sales order) and ZXVEDU04 (to modify the batch input for creating the sales order). Maybe you can find your fields in here and clear them, so that SAP doesnt try to change the order-type field in EDI processing.
In case you want to allow certain fields to be editable, check userexit MV45AFZZ form "userexit_field_modification". There you can set fields editable or not.
Example:
CASE screen-name.
    WHEN 'VBAP-MVGR3'.
      IF sy-tcode = 'VA01'.
        screen-input = 0. " 0 = field NOT editable, 1 = field editable
      ENDIF.
ENDCASE.
Regards
Ralf

Sales Order with Partial and down payment (milestone billing)

Hello Experts,
I have configured a scenario where a down payment and a partial payment and a closing invoice is done on the billing plan for a sales order. The down payment request was done and posted manually in FI and the process went well. The issue i have is that the down payment is not reflected in my partial invoice or my second invoice and my closing invoice as well is not reflecting the payment made for the partial invoice (which is suppose to contain the amount less the down payment).
Please, how do i resolve this issue?
Thanks.

Hi,
See from what i feel from your description is, the business process is as follows:-
1) You receive the down payment request, this goes to a special g/l with indicator "F". Now when you recieve the payment you subsequently clear the amount through T-code F-29. In this case the down payment amount or the advance is treated as a deposit, which you adjust against each partial invoice, or completion of certain project.
2)When you create a partial invoice, considering the example in my earlier post you book complete value of the invoice i.e. RS 800.
The client requires that RS 720 and Rs 80 should goto seprate g/l accounts. IN this case you need to define a condition type say "zadv" assign a new account key to it say "zad" in SPRO>SALES AND DISTRIBUTION>BASIC FUNCTIONS>ACCOUNT ASSIGNMENT/COSTING>REVENUE ACCOUNT DETERMINATION>DEFINE AND ASSIGN ACCOUNT KEYS.After billing of the correspoding amount I.e RS 80 will be cleared through F-39. Please check the same with you FI consultant.
3)Since the condition tab page is greyed out , SPRO>SALES AND DISTRIBUTION>BASIC FUNCTIONS>PRICING>PRICING CONTROL>DEFINE AND ASSIGN PRICING PROCEDURE>ASSIGN PRICING PROCEDURE TO BILLING TYPES. Also check in tcode VOFA wether oc. pric. procedure si assigned or not.After doing this you can add teh condition type "ZADV".
also you can refer to this link down payment condition type (azwr)
Regards
Aadesh Kamat
Edited by: aadesh123 on Jul 14, 2011 6:41 AM

ERP Sales Order with Profit Center value mandatory in ECC side!

Hi Experts,
I'm working with a scenario using SAP CRM 7.0 and ECC 6.0 EHP4, using ERP Sales Order and ERP Quotation.
The sales order transaction type in ECC side is set up to use profit center at item level as mandatory and I can't find this attribute at Item Details in CRM Webclient. I can't save my order, because this error and the AB Incompletion Log always shows this error.
Any ideas? Is it possible set profit center value in CRM?
Best Regards
Heber Olivar

Hi Heber!,
I hope you are doing well.
We have the same issue, please could you share us how did you resolve this issue?
We have SAP CRM 7.0 EHP2 and SAP ECC 6.0 and for the creation to ERP Orders correctly in SAP CRM is necessary the profit center value.
Thanks in advance.
Best Regards!

Report for sales orders with abnormal discounts

Hi
We have a discount condition type say ZDIS with 10% which is not changeable manually in sales order..But incase if the user has changed the condition master to 12% and created the sales order with 12%disc...Hence i need a report, the list of sales orders with the abnormal discounts..(the sales orders with the discount value more or less than 10%)..
How do i get this report..Kindly provide me the table names&logic ...
Reg
JJ

We have a discount condition type say ZDIS with 10% which is not changeable manually in sales order..But incase if the user has changed the condition master to 12% and created the sales order with 12%disc...Hence i need a report, the list of sales orders with the abnormal discounts..(the sales orders with the discount value more or less than 10%)..
How do i get this report..Kindly provide me the table names&logic ...
Select KNUMH where KONP-KSCHL EQ ZDIS ( Condition record number)
Select KONV-KNUMV Where KONV-KNUMH EQ KONP-KNUMH
Select VBAK-KNUMV where VBAK-KNUMV EQ KONV-KNUMV
Then with the help of ABAPER hard code the condition amount (KBERT>10%)
Regards
Rohit

Sales order with material & plan cost

Hi,
A sales order with material and assign WBS can display the plan revenue which equal sales revenue. How can I make the material cost also be display as plan cost? This material cost should equal standard price of material master.

It is not possible to copy material cost from sales order to project. Please activate network cost planning, and assign the same material in the project structure, so system will take the material cost in plan cost.

Changing Rejected Sales Order Items with BAPI?

Hi Forum,
I have the following challenge, would be great if someone of you could help me out. Will help me solve some of my performance problems.
I have sales orders which are temporary and have 'rejected order items'. Now the requirement is that I have to change the 'rejected order items' (quantity and Delivery dates) based on some XYZ criteria. Now using the BAPI_SALESORDER_CHANGE bapi I have to
1. first get rid of the 'REJECTION REASON'
2. Change the order item and then reset the above.
I tried doing it by populating the order_items internal table with two entries but to my surprise it works once and fails twice!!! I get some errors that are totally irrelated and wierd.
As for now, I've just adjusted the program(dirtily??) and will be calling the BAPI twice for a change !!!(Huh!)
Now if anybody knows how to deal with the above problem just drop a few lines, will be of good help to me.
Thanks and regards,
ZAM

Hi Srinivas,
Thanks for the reply. The rejection reason is set manually, when creating the sales order. I do set the update flag to 'U' and also activating all the X structures. But still it did not work.
Let me put it very simple. Is it possible to change the rejected order items, through BAPI's? If yes, how?
Regarding the error messages I will have to change the code again to recreate the messages will let you know as soon as I am finished with some things. But however here are some errors
Field 'WMENG' cannot be changed, VBEPKOM 000100 0001 ready for input
Field 'WMENG' cannot be changed, VBEPKOM 000100 0001 ready for input
Sales document 0030000031 was not changed
there are few others which appear now and then indicating a system error !!
thanks,
ZAM

List of sales order with only open qty

Hello sap gurus,I am working in a support project for a leading cement manufacturer,I am facing a issue related to list of sales order only with remaining open quantities.In va05 transaction it gives the list of open sales orders,but if none of the line items is delivered,but according to the clients reqiurement they want the list of open sales order ,means say if a sales order has 5 line items and 3 are delivered but 2 are remaining, the list should give the list in such a way that the sales order with only 2 open items should also appear.
please guide me if there is any t-code for the same other than va05,else any developement work needs to be done.
Regards,
Anshuman

Dear Anshuman,
T. Code: VL10C
This is the Best-suited Report, for your requirement.
Best Regards,
Amit

Issue in creating sales order with ref contract(quantity)

hi friends,
I am creating sales order with reference contract using
"BAPI_SALESORDER_CREATEFROMDAT1"
my issue is with quantity field when i am entering quantity as 1 then it is taking as 0.001
i am also declaring its unit field too but there is no change.
in my program i am taking quantity as parameter.
field description is like this Order qty in sales units - 00009001 corresponds to 9.001
is there any chance of changing the quantity .
please help.

There is another similar post...look at those comments. Consider the data types in use...in true numeric fields with decimals, the decimal is implied, so look at how you're sending and/or converting any value.... For instance, if I were sending data to a quantity field described as curr 15, decimals 3, I would expect that I needed to send 1.000 (or perhaps 1000, depending on my testing) in the input to get a quantity of 1.

No. of sales order with open quantity in a month

Hello experts,
I have a requirement to calculate open sales order quantity and
the number of sales order with open quantity for current month.
Please advise which tables can give this logic. I have the idea
of calculating open SO quantity from VBAP and LIPS table but how
to compile the number of sales order with the open quantity
Thanks
Rahul

HI
can you please try in VBUK table.
Hope this helps
Thanks
Madhav

Problem adding sales order with freight since 8.8 pl 20 (and 8.81 pl 0)

Dear All,
Since the upgrade to 8.8 patch 20 I have a problem with adding a sales orders with freight (expensecode 1 does exist!) through the XML import of (the same problem with 8.81 pl 0).
This is the XML:
<BOM>
     <BO>
          <Documents>
               <row>
                    <DocType>dDocument_Items</DocType>
                    <DocDate>20110328</DocDate>
                    <DocDueDate>20110328</DocDueDate>
                    <CardCode>INT_C_PenS</CardCode>
               </row>
          </Documents>
          <Document_Lines>
               <row>
                    <ItemCode>10000024</ItemCode>
                    <ItemDescription>Afvalbak CONSTRUCTO 50</ItemDescription>
                    <Quantity>4.00</Quantity>
                    <ShipDate>20110328</ShipDate>
                    <DiscountPercent>20.00</DiscountPercent>
                    <UnitPrice>528.00</UnitPrice>
                    <LineStatus>bost_Open</LineStatus>
                    <LineType>dlt_Regular</LineType>
               </row>
          </Document_Lines>
          <DocumentsAdditionalExpenses>
               <row>
                    <ExpenseCode>1</ExpenseCode>
                    <LineTotal>64.00</LineTotal>
               </row>
          </DocumentsAdditionalExpenses>
     </BO>
</BOM>
When the DocumentsAdditionalExpeses part is deleted then there is no problem.
The error with the DocumentsAdditionalExpeses is 'Internal error accured'.
Can anyone confirm that this not is working through XML import (DTW works) or is there a solution?
Thanks and best regards,
Wim Kleinsman

Hi,
Try this one.
<BOM>
<BO>
<Documents>
<row>
<DocType>dDocument_Items</DocType>
<DocDate>20110328</DocDate>
<DocDueDate>20110328</DocDueDate>
<CardCode>INT_C_PenS</CardCode>
</row>
</Documents>
<Document_Lines>
<row>
<ItemCode>10000024</ItemCode>
<ItemDescription>Afvalbak CONSTRUCTO 50</ItemDescription>
<Quantity>4.00</Quantity>
<ShipDate>20110328</ShipDate>
<DiscountPercent>20.00</DiscountPercent>
<UnitPrice>528.00</UnitPrice>
<LineStatus>bost_Open</LineStatus>
<LineType>dlt_Regular</LineType>
<ExpenseCode>1</ExpenseCode>
<LineTotal>64.00</LineTotal>
</row>
</BO>
</BOM>
Regards,
Siva

List of rejected sales order with quantity and value

Similar Messages

Maybe you are looking for