List of Routines where info object is used
Hi all,
I would like to list all routines where a info object is used. Can anybody tell me how do I do it in BW.
Regards
NPR
RSTSRULES & RSTRANROUTMAP in SE16
Similar Messages
-
How to get List of all activated Info objects in sap BI production system
Hi Experts,
For my requirement I need list of all activated info objects in sap bi production system.
Can any body suggest any thing.Hi,
Check in the following table, all the below tables are for InfoObejct related only
RSDIOBJ -
Directory of all InfoObjects
RSDIOBJT------ Texts of InfoObjects
RSDIOBJ------- Directory of all InfoObjects
RSDIOBJT----- Texts of InfoObjects
RSDATRNAV------ Navigation Attributes
RSDATRNAVT----- Navigation Attributes
RSDBCHATR------ Master Data Attributes
RSDCHABAS------- Basic Characteristics (for Characteristics,Time Characteristics, and Units)
RSDCHA----
Characteristics Catalog
RSDDPA -
Data Package Characteristic
RSDIOBJCMP----
Dependencies of InfoObjects
RSKYF----
Key Figures
RSDTIM----
Time Characteristics
RSDUNI -
Units
Thanks
Reddy -
Delete unnecessary data in info objects by using a process chain
Hi Guru's
I need to make a process chain which deletes data which is not used within an info object. I know how to delete the master data which is not used for an info object. But I want to make a chain for this so I can run this chain so all not used data of all info objects will be deleted. Can anyone show me how to make this chain?
Thanks in advance!
Best regards,
Jens
Edited by: Jens Bevers on Aug 13, 2008 12:15 PMHi Siggi,
Thanks for your quick reply!
Can you please be a bit more specific with your answer, because I am not used to create an ABAP. So can you please give a short stepwise manual what I need to do now.
Best regards,
Jens
Edited by: Jens Bevers on Aug 13, 2008 1:39 PM -
What is meant by matn1 conversion routine in info object
hi,
Can i know the exact meaning and usage of matn1 (type of conversion routine) in the infoobject level.
thanks in advanceHi Sankar,
Conversion takes place when converting the contents of a screen field from display format to SAP-internal format and vice versa and when outputting with the ABAP statement WRITE, depending on the data type of the field.
Check the info here:
http://help.sap.com/saphelp_nw04/helpdata/en/2b/e9a20d3347b340946c32331c96a64e/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/07/6de91f463a9b47b1fedb5be18699e7/content.htm
Hope this helps... -
How to reduce the length of the info object that's being used?
Hi All,
I have created info objects and used them in a DSO. Now I want to reduce the length of the info objects but i'm unable to do it. When I reduced the length and tried activating the Info object, it's giving me error and the info object is not getting activated. Please guide me how I can reduce the length and activate the Info Object.
Thanks
Hima BinduReducing the length of an infoobject is not that easy
Cleanest way -
Drop all transaction data for that infoobject
Drop all data in the DSO and cubes.
Reduce the length and then activate and transport all the infoobject and there dependence objects. -
Info Object: Change of Data Type (NUMC to CHAR)
We have a scenario wherein one of the Info objects is defined currently as NUMC. Due to the change in the Source system, the info object is now defined with data type as CHAR. The info object in consideration is the "Cost element".
As the current info object contains data, it will not be possible to change the data type from NUM to CHAR.
Is there any pre-defined way of doing this data type change without loss of data (in the info object as well as the info cube(s) where the info object is used)?
Regards
BalaHi Balakrishana,
Try this:
Insted of changing the definition of infoobject(NUMC to CHAR), why cant you change the data itself from CHAR to NUMC...?? If length is same.
You can write a simple routine in transfer rules and you can convert.
Hope it Helps
Srini -
Increasing the length of Char type Info-object ( impact )?
Hi,
We are on BW3.5 version and we have a custom defined Info-object ZP_REPORT(say )whose length is 3 now as all the three digit series will be used up in near future we have a requirement to increase the length of the characteristic.
This Info-object is used Navigation attribute of 0Material. And also this info-object is used as Navigational characteristic in few Info-cubes.
Can any one please let me know what would be the impact of increasing the length?
1)Do I need to delete the master data from this ZP_REPORT?
2)DO I need to delete the master data from 0MATERIAL?
3)Will there be any impact on Info-Cubes?
Thanks in advance.
Regards
AjayHi Ajay,
It is always big challenge to change the existing info object lengh or type or anything that have gone live already..........
But if we will be very careful at the time of changing length and transport, we can do it succefully......
Lets come to your scenario... In my understanding
i) Your scenario is going to change the info object length that info object is only available for attribute. It is not at all used anywhere in the dimenstion table. So your cube will not be affected.... If problem will come your master data only will be affected.... Verify more than one time your info object is not at all used in any cubes. (Go to infoobject change mode check in where used list)
ii) Before changing the length in development, data should be available in development cube as well as master data.. Because you can verify it in development itself whether the data will be deleted or not at the time of changing the length and activate the info object.
iii) At the time of transport transport only the particular info object. Dont sent any other info objects. That might have related with any cube.
iv) For safety purpose check whether your info cube is having which type of load. Either Full load or Delta. Most of the cubes will be having delta. If it is full, then we dont have more worry on that.
v) Finally if possible, create one backup cube and back master data and load data from your existing cube to that cube. If the data will be more that 2 GB it is not a simple task to take a backup..... This is only for safty purpose......
Please let me know your status...............
Best Regards,
Vivek -
Hi Team,
I Had deleted one of the navigational attributes in Master data object.After that when i want to activate the object it is giving conversion error.
PLS let me know how can i achieve this.Is there any solution.
suggestions appreciatedHi Raju,
Thanks for your help.
I noticed that this navigation attribute are available in the cubes.
However, they are not active, and I do not know how to "remove" these from the cubes.
Could you please elaborate how to remove this navigation attributes from the cubes?
If I understand it correctly, the reason why we could not activate the info objects is because if a navigation attribute has been added to a certain info object and activated, then we can no longer remove this navigation attribute as SID has been created for this relationship.
The only way to remove this relationship is to remove this relationship in all places/cubes where this info object is used. But if this possible at all since the SID has been created, and I do not know whether we can delete this SID?
Many thanks in advance.
Fen -
Hi All,
Could you please let us know the table name where info object attributes are stored in BW system?
Regards,
RahulHi,
Try this table RSDBCHATR
Thanks
El. -
Urgent - Problem with info object
Hi All,
I have info object ZH_SONR (not master datatable), I changed the length of the info object from 12 to 10 in the development system. This info object is used in the general remote info cube.
Now my issue is I moved the change from development to acceptance. I moved the info object without deleting the msater data in the development system. due to this transport request failed to move to acceptance sys and also the inof obnject is inactive in the acceptance sys. (How activate info oject directly acceptance syst)
Can anybody suggest me.how to solve this issue. Pleae it very very urgent for me
Thanks in Advance
NarendraHi,
Just to correct you there is no need to move the dependencies of the infoobject esp the cube if they are already present in the acceptance system.
Check the exact error using the log in the transport and you will come to know the error for the transport.There can be other errrors also might be number range interval missing or so. So please check the log in se10 or se09 and see what is the error u are getting for the transport Deleting data in the dev system will not hamper i feel you need to take care of the data in the acceptance system .
Please rethink concern and then proceed.
Thanks
Puneet
Edited by: Puneet Chawla on Apr 4, 2008 9:57 AM -
0vendor info object - Plant Attribute
Hi,
I had modified 0vendor info object for using all the Dun and Bradstreet objects. After activating the 0vendor infoobject, 0plant attribute version got changed to 'Revised' version.
Since, 0plant info object is used in many info providers, if i try to activate the 0plant info object, all respective transformations and DTP's of info providers will be inactive.
Is there any other way, in which without disturbing the existing info providers, i can move 0vendor info object alone from BI development/Quality environment to BI Production environment.
Please suggest.Hi,
Even if 0plant is display attribute it suppose not to chnage the version in case of 0vendor activation alone( if you have done activation with dependent object then it would effect ).
If you activate plant now it would effect the existing dependent objects.
Do not try to activate the 0plant ( since plant is Master data table, if will defiantly effect the existing objects)
also make sure that is it happen coz of 0vendor activation
Regards,
Satya -
Is there any way to get a list of all of the queries that you a specific Info Object? I've tried using the Where Used List of the Info Object in RSA1, but it doesn't seem to be working.
Any Ideas??
Thanks!
TinaHi
If you want to get the list of infoobjects used in a query then, goto SE38->RSRQ_QUERYDEFINITION.
In thisprogram if you give the report or query name and execute it'll display all the infoobjects used with in that query.
Or else,if you want the list of queries which contains a particular infoobject , then you have to follow the below method.
For Characteristics:
Goto RSZSELECT table.
Give IOBJNM and get ELTUID.
Goto RSZELTXREF table.
In this TELTUID = RSZSELECT-ELTUID.
and get SELTUID.
Copy the SELTUID and give to TELTUID,means TELTUID = RSZELTXREF-SELTUID.
Repeat the procedure until it gives no data available.(Copy all the SELTUIDs )
Then give all the SELTUIDs as input to RSRREPDIR-COMPUID.
i.e.,RSRREPDIR-COMPUID = RSZELTXREF-SELTUID(i.e.stored SELTUIDs).
This gives the list of queries for a particular characteristic.
For Standard Keyfigures:
Goto RSZRANGE table.
Get ELTUID by giving LOW = keyfg and SELTP = '6'.
And then follw the same procedure as it is for characteristic.
Santosh -
Info Objects in Queries where (not) used
Hi Experts,
We're currently preparing migration from BW 3.5. to 70. I think this is a perfect opportunity for a clean up.
I want to start with info objects, especially their use in queries. so my question:
Is there a table (or tables) with the refernce of a query to info objects or vice versa?
I'd like to create a report, that shows e.g. all IOs not used in queries, how often used in queries and so on.
I checked tables like RSRREPDIR, RSZELTXREF etc., but without any success and I dare to doubt that there is a FM or a report provided by SAP.
Thanks in Advabce and Regards
JoeHi Pravender,
I could use sample code from related link
Where-used list of an attribute (either display or navigational)
as template for a report, what finally helped to fulfill my requirements mostly.
Thanks and Regards
Joe -
List of Info Objects used in a process chain
Hi,
I have a master data process chain and in that process chain, close to about 50 Info objects are included. Rather than checking manually, I would like to know if there is any automated way to get the list of info objects used in a process chain.
Please let me know if there is any table that gives this information.
Thanks & Regards.following transparent tables store Process Chain related data... there you might get the information you are looking for..
RSEVENTCHAIN Event Chain Processing Event Table
RSEVENTHEAD Header for the event chain
RSEVENTHEADT Header for the event chain
RSPCCHAIN Process chain details
RSPCCHAINATTR Attributes for a Process Chain
RSPCCHAINEVENTS Multiple Events with Process Chains
RSPCCHAINT Texts for Chain
RSPCCOMMANDLOG System Command Execution Logs (Process Chains)
RSPCLOGCHAIN Cross-Table Log ID / Chain ID
RSPCLOGS Application Logs for the Process Chains
RSPCPROCESSLOG Logs for the Chain Runs
RSPCRUNVARIABLES Variables for Process Chains for Runtime
RSPC_MONITOR Monitor individual process chains
Regards,
Sharayu -
Info Object is missing in the Cube available list.?
Hi Experts,
I have one standard SAP Delivered Info object which is available in RSA1. But when I'm trying to create a Cube with the available field list., there its not getting appear for the selection.!!
So please clarify me what needs to be done in this case.
This Infoobject is available in the Active Version and assigned in the proper Info area.
Points will be awarded.
thanks
BUlliHi Anil,
So many thanks for the reply. As my Dev systems was down. I cudnt able to change the settings. And today I did the change and tried actiavting the object. But the activation has failed bcz of the following reasons.
In Yello
You must generate new SIDs for the characteristic values in ODS object 0CRM_PROI
You must generate new SIDs for the characteristic values in ODS object 0CRM_QUT1
You must generate new SIDs for the characteristic values in ODS object 0CRM_QUT2
In RED
Transfer structure 2LIS_12_VCITM_LB was deactivated
Programs for data transfer were regenerated where necessary
Program Status Reset for ID 45S10DTZ9Q9YI10USG8NTTHAA
The exception occurred (program: CL_RSDRO_GET_SIDS_FOR_ODSO====CP, include CL_RSDRO_GET_
Value 'ÈS' (hex. '8D828DC88E53') of characteristic 0INCOTERMS2 contains invalid charac
The exception occurred (program: CL_RSDRO_GET_SIDS_FOR_ODSO====CP, include CL_RSDRO_GET_
Value '¤ÉÜS' (hex. '82A482C982DC8E53') of characteristic 0INCOTERMS2 contains invalid
Resetting of Incorrect Objects Back to the Active Version (InfoObject )
Post Processing/Checking the Activation for InfoObject 0INCOTERMS2
Characteristic 0INCOTERMS2: Error when generating master data routines
Error when resetting InfoObject 0INCOTERMS2 to the active version
Property "Exclusive Attribute" of characteristic 0INCOTERMS2 was deactivated
Error when generating SIDs for the characteristic values in ODS object ********
Error when generating SIDs for the characteristic values in ODS object ********
Error when activating InfoObject 0INCOTERMS2
I tried with RSKC to resolve the issue with the Invalid Characteristics, but still the prob is repeating again.
Can you please guide me what needs to be done for this.
thanks
Bulli
Maybe you are looking for
-
How to get week of a year in American Standard
Hi, I know it might be a repetitive question, but did not find a convincing solution to it in any of the previous threads. I am looking for a function (user defined, if someone has already written it) to return me the week of the year, in American St
-
ITunes Store About a movie on iTunes
Please Please Apple!! Please somehow put Transformer One and Transformer two. I know it is not up to you to put that crap on there. I do not understand why every other movie gets on iTunes but not Transformers. You have a lot of people that would buy
-
$10 certificate for Destiny
Hi, it has been almost 26 days since I went and picked up the destiny bundle at bestbuy which I preordered on the 7th of september. the certficates and the rewards points are supposed to take 20 days and I still do not see my neither rewards points.
-
Hello, I like to get your suggestion in setting up the DAQ system. I am very beginner in this issue. These SCXI listed below are what we have in the laboratory. I will use DAQ card 6062E. SCXI 1000 SCXI 1520 SCXI 1140 SCXI 1142 SCXI 1305 , 1302 , 130
-
How do I get rid of "Yahoo! Search - Web Search" that comes up in address bar every time I click on a new tab? I have to delete it in order to go to the site I want. Very annoying. I can not find it in program file.