List of running programs?

I'll keep this brief: I'm basically a mac illiterate and recently purchased a macbook pro running leopard. My question is when I am finished using a program and click the red X at the top left the program does not actually quit, how can I get a list of programs that may not be in use but are still running in the background. Thanks.

And also these:
Basic Tutorials on using a Mac,
MacFixIt Tutorials,
MacTips, and
Switching to the Mac: The Missing Manual, Leopard Edition.
Additionally, *Texas Mac Man* recommends:
Quick Assist.
Welcome to the Switch To A Mac Guides,
Take Control E-books, and
A guide for switching to a Mac.

Similar Messages

The following remoteapp program is not in the list of authorized programs.

Hi,
Iam in a pickle at the moment.
My RDS 2012 R2 environment was working successfully previously, arrived from holiday and it is not longer working.
My setup:
**RDS01 ( Session Host and Connection Broker Roles )
**RDS02 ( Web Access, Gateway and Licencing Roles)
The Problem i am facing is, after successfully login to the RDWeb page, lunching the remoteapp i get the following:
1st Get Certificate mismatch ( name in the certificate RDS02.mycompany.local is not trusted )
2nd Hit YES and the following message "Windows cannot start the RemoteApp program. The following RemoteApp program is not in the list of authorized programs: WinWord"
It happens whether i do connect externally.
Internally the SSO does not work ( i did check my certificate and it is installed )
If i run the script Set-RDPublishedName and change it from remote.mycompany.com to RDS01.mycompany.local
1st Certificate name mismatch ( requrested pc RDS01, name in the certficate remote.mycompany.com )
2nd Hit Yes and the app works
It happens whether i do connect internally or externally.
Any help will be very appreciated.
cheers
Elton

Hi Elton,
It sounds like the DNS lookup is resolving to the wrong ip address. When the RD Gateway (RDS02) looks up remote.yourcompany.com to connect to your broker/RDSH it should resolve to the ip address of RDS01, but it appears it is resolving to RDS02 instead.
I recommend you use Set-RDPublishedName to change the name back to what is was before (remote.yourcompany.com) and verify that your DNS settings are correct. For example, if you log on to RDS02 and try to ping remote.yourcompany.com it should try to
ping the internal ip address of RDS01, since that is your connection broker.
-TP

Payment Run Program (FPY1)

Hello Experts,
I am trying to understand payment run process (FPY1) and outbound direct debit file generation using standard transactions. We are using NACHA defined ACH format (which is a standard format used by US based banks). I found below event Modules for Payment Medium Formats: FKK_PAYMEDIUM_ACH_00, FKK_PAYMEDIUM_ACH_20, FKK_PAYMEDIUM_ACH_30, FKK_PAYMEDIUM_ACH_40. Unfortunately I am not able to determine their usefulness.
As per my understanding FPY1 updates DPAYH table and then run program "SAPFKPY3" to generate a file but then whats the use of function modules mentioned above?
Also, when I ran "SAPFKPY3" it generated message saying "Format ACH: No payment mediums created - No payment media were created for payment group 0 for format ACH." I am damn sure I am missing something, but don't know what.
Any suggestions would be of great help. Thanks.
Kind Regards,
Nikhil J.

Hi Nikhil,
The FMs that you have mentioned in your post are used to create the ACH format file that is send to the banks.
FKK_PAYMEDIUM_ACH_20-For File Header
FKK_PAYMEDIUM_ACH_30-For Batch header
FKK_PAYMEDIUM_ACH_40-For Payment Details
You can view these FMs by going to Transaction Code-FQP3. Select in the ACH format and clicking on "Event Module for Payment medium formats.
So, the ACH file that gets created during the FPY1 run is actually done by the standard program SAPFKPY3 with the help of these preconfigured FM's linked to the ACH payment medium format.
Now to the error that you are getting.Firstly Check whether the payment proposal list is getting generated or not.
If the payment proposal is not there, then there is some basic problem in the configuration settings.
(a) Check the company code for which you are running the FPY1 run, is the Payment medium linked with that in the config.
IMG->Financial Accounting->Contract Accounts Receivable and Payable->Payments->Incoming/Outgoing Payment Creation->
Define Payment Methods
IMG->Financial Accounting->Contract Accounts Receivable and Payable->Payments->Incoming/Outgoing Payment Creation->
Define Specifications for Paying Company Code
If the payment proposal is there, then the problem is only there in the payment medium format.
(a) Check the FM's are linked to the ACH format in FQP3.
(b) Note 1064779 also involves some manual activities to be performed apart from the code changes.
The manual activites are as follows and has to be perfomed one after another.
Hope it helps....
Thanks,
Amlan

Run Program activity not exiting

I'm running SCOrch 2012 R2 and am having trouble with a runbook hanging. Here are the facts
My runbook executes a script (the code for which, I have included below) that gets a list of AD users and exports that list to a .csv file.
When run manually, from a Powershell window, the script executes and returns the expected file, before returning to the prompt.
When run through the SCOrch, the script runs fine, with the output file created and the Powershell process exiting.
The commands I'm using to execute the script manually and through the runbook, are the same (see below) and the run-as accounts are the same.
The runbook never gets past the step that runs the Powershell script.
The activity looks like this:
Command execution
Command: cmd.exe /c | C:\Windows\system32\WindowsPowerShell\v1.0\powershell.exe –c "C:\it\getADUserProperties-Parameterized.ps1 -SearchPath 'ou=customer,dc=domain,dc=tld' -DomainName domain.tld | Export-Csv C:\it\userList.csv -NoTypeInformation"
Run as account credentials specified
The rest of the options are set to the default values
The question is, why doesn't the Run Program activity close when powershell.exe exits? I know it won't matter, but here is the script anyway:
<#
.Synopsis
Get Active Directory user list with a user-specified set of properties
.DESCRIPTION
Get a list of Active Directory users from a user-specified list of containers (or the root of the domain) and return a user-specified set of attributes.
This script can connect to non-native domains (domains that the executing computer is not a member of) if DNS is configured properly. If accessing a
non-native domain, the script will prompt for credentials.
.NOTES
Author: Mike Hashemi
V1 date: 15 August 14
.LINK
.PARAMETER DomainName
Defines which DNS domain to connect to.
.PARAMETER SearchPath
Default value = cn=users,dc=domain,dc=tld. This parameter represents the AD to search and can contain multiple values.
.PARAMETER OutputProperties
Default value = Name,Enabled. This parameter represents a comma-spearated list of AD attributes to return.
.EXAMPLE
.\getADUserProperties-Parameterized.ps1 -DomainName domain.tld
This example will output the name and enabled status of all users in "cn=users,DC=domain,DC=tld" and below.
.EXAMPLE
.\getADUserProperties-Parameterized.ps1 -OutputProperties name,telephoneNumber | Export-Csv C:\userList.csv -NoTypeInformation
This example will output the name and telephone number of all users in "cn=users,DC=domain,DC=tld" and below. Output will be sent to c:\userList.csv.
#>
[CmdletBinding()]
param(
[Parameter(Mandatory=$True)]
[string]$DomainName,
[string[]]$SearchPath = 'cn=users,DC=domain,DC=tld',
[string]$OutputProperties = 'Name,Enabled'
Import-Module ActiveDirectory
If ((Get-Module ActiveDirectory -ErrorAction SilentlyContinue) –eq $null) {
Write-Error "This script requires the Powershell Module: 'ActiveDirectory'. Please make sure you've got the correct tools installed."
Exit
Else {
Foreach ($ou in $SearchPath) {
Try {
Write-Verbose ("Getting users from {0}." -f $ou)
Get-ADUser -Filter * -SearchBase $ou -Properties $OutputProperties.Split(",") -Server $DomainName | Select $OutputProperties.Split(",")
Catch [System.Security.Authentication.AuthenticationException] {
Write-Output ("Connection failed. Prompting for credentials to {0}" -f $DomainName)
$cred = Get-Credential -Message "Enter credentials for $DomainName."
Write-Verbose ("Getting users from {0}. with user: {1}" -f $ou, $cred.Username)
Get-ADUser -Filter * -SearchBase $ou -Properties $OutputProperties.Split(",") -Server $DomainName -Credential $cred | Select $OutputProperties.Split(",")
Thanks.

mhashemi,
I had a simliar issue as you did where my runbook would run until it got to the "Run .Net Script" Activity and then the Runbook would just stop. What I found was you can not have the command "Exit" in your script. The command "Exit"
will force the Activity to close and will not output any variables.
I am not the only one to find this issue.
Check out the article labeled
"Run .Net Script (powershell), "exit" and published data" on technet under
System Center Orchestrator > System Center Orchestrator - General
(not able to post the link, I am restricted)
Doesn't sound like there is going to be a fix anytime soon
Hope this helps
-Ozarkclay

How to clear running programs

How do I clear the running programs on my iPad 2? I fingured out how to bring them up - pushing the button 2x. I figured out how to check them - hold button down. but How do I clear them?

Shut down an app...
- From any Home Screen, double tap the home button to bring up the Recents List
- Tap and hold any icon until they wiggle
- Press the red to delete the offending app from this list.
- Press the home button twice when done.
- Restart the app
Note that the vast majority of apps cannot and do not run in the background. For more info on Multitasking...
http://support.apple.com/kb/ht4211
http://whenwillapple.com/blog/2010/04/19/iphone-os-4-multitasking-explained-agai n/
http://www.macworld.com/article/1164616/how_ios_multitasking_really_works.html
http://speirs.org/blog/2012/1/2/misconceptions-about-ios-multitasking.html

OWB - Workflow- Cannot run program "/usr/bin/perl": CreateProcess error=2,

Hi All,
I am using OWB 11gR2 and I am getting "perl" location error after start workflow for any dimension or fact.
*Cannot run program "/usr/bin/perl": CreateProcess error=2, The system cannot find the file specified
The log is below. I am using Windows 2008 R2 OS and 11gR2 DB. The perl path is set in the environment variables and I can run the perl.exe from command line.
Why OWB is looking for the Unix base path "/usr/bin/perl": is a question for me.
If anybody knows the issue please guide me.
Thanks
OUBIWF_D_DEVICE_ACTIVITY_TYPE                                        2012-07-04 16:57:37.0     4
Parameters
OUBIWF_D_DEVICE_ACTIVITY_TYPE:FILEMGR_PRE                              1          2012-07-04 16:57:38.0     2
Parameters
RPE-02229: The following debug information was collected:
RPE-02230: Debug Information: os.name = Windows Server 2008 R2
RPE-02230: Debug Information: os.version = 6.1
RPE-02230: Debug Information: os.arch = amd64
RPE-02230: Debug Information: user.name = INT-A-MDM-01$
RPE-02230: Debug Information: user.dir = C:\product\11.2.0\dbhome_3\owb\bin\win32
RPE-02230: Debug Information: argv.arg0 = /usr/bin/perl
RPE-02230: Debug Information: argv.arg1 = /spl/intbase/DB/tools/filemgr/splfilemgr.plx
RPE-02230: Debug Information: argv.arg2 = -l
RPE-02230: Debug Information: argv.arg3 = /spl/BIDevelopment/bi2400db
RPE-02230: Debug Information: argv.arg4 = -n
RPE-02230: Debug Information: argv.arg5 = D_DEVICE_ACTIVITY_TYPE_EXT.DAT
RPE-02230: Debug Information: argv.arg6 = -p
RPE-02230: Debug Information: argv.arg7 = 1
RPE-02230: Debug Information: argv.arg8 = -s
RPE-02230: Debug Information: argv.arg9 = S
RPE-02230: Debug Information: argv.stdin =
RPE-02230: Debug Information: USERPROFILE = C:\Windows\system32\config\systemprofile
RPE-02230: Debug Information: JAVAPATH = C:\product\11.2.0\dbhome_3\jdk6
RPE-02230: Debug Information: NODEID = 1
RPE-02230: Debug Information: IAS_HOME = C:\product\11.2.0\dbhome_3
RPE-02230: Debug Information: SystemDrive = C:
RPE-02230: Debug Information: RTHOME = C:\product\11.2.0\dbhome_3
RPE-02230: Debug Information: Path = C:\product\11.2.0\dbhome_3\bin;C:\product\11.2.0\dbhome_3\jdk6\jre\bin\client;C:\product\11.2.0\dbhome_3\jdk6\jre\bin;C:\product\11.2.0\dbhome_3\owb\bin\admin;C:\Windows\system32
RPE-02230: Debug Information: CONNECT_SPEC = 10.34.32.136:1521:MDM
RPE-02230: Debug Information: PROCESSOR_REVISION = 1a05
RPE-02230: Debug Information: OCM_ORACLE_HOME = C:\product\11.2.0\dbhome_3
RPE-02230: Debug Information: USERDOMAIN = WORKGROUP
RPE-02230: Debug Information: ALLUSERSPROFILE = C:\ProgramData
RPE-02230: Debug Information: TMP = C:\Windows\TEMP
RPE-02230: Debug Information: CommonProgramFiles = C:\Program Files\Common Files
RPE-02230: Debug Information: PROMPT = $P$G
RPE-02230: Debug Information: PROCESSOR_LEVEL = 6
RPE-02230: Debug Information: JVM_OPTIONS = -Xmx768M
RPE-02230: Debug Information: LOCALAPPDATA = C:\Windows\system32\config\systemprofile\AppData\Local
RPE-02230: Debug Information: COMPUTERNAME = INT-A-MDM-01
RPE-02230: Debug Information: SystemRoot = C:\Windows
RPE-02230: Debug Information: ORA_HOME = C:\product\11.2.0\dbhome_3
RPE-02230: Debug Information: USERNAME = INT-A-MDM-01$
RPE-02230: Debug Information: APPDATA = C:\Windows\system32\config\systemprofile\AppData\Roaming
RPE-02230: Debug Information: ProgramData = C:\ProgramData
RPE-02230: Debug Information: PATHEXT = .COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH;.MSC
RPE-02230: Debug Information: ORACLE_HOME = C:\product\11.2.0\dbhome_3
RPE-02230: Debug Information: RTUSER = OWBSYS
RPE-02230: Debug Information: ProgramFiles(x86) = C:\Program Files (x86)
RPE-02230: Debug Information: TEMP = C:\Windows\TEMP
RPE-02230: Debug Information: OEM_HOME = C:\product\11.2.0\dbhome_3
RPE-02230: Debug Information: ProgramFiles = C:\Program Files
RPE-02230: Debug Information: JDK_HOME = C:\product\11.2.0\dbhome_3\jdk6
RPE-02230: Debug Information: OCM_HOME = C:\product\11.2.0\dbhome_3
RPE-02230: Debug Information: ProgramW6432 = C:\Program Files
RPE-02230: Debug Information: PROCESSOR_IDENTIFIER = Intel64 Family 6 Model 26 Stepping 5, GenuineIntel
RPE-02230: Debug Information: STARTUP_TYPE = -manual
RPE-02230: Debug Information: PROCESSOR_ARCHITECTURE = AMD64
RPE-02230: Debug Information: OS = Windows_NT
RPE-02230: Debug Information: FP_NO_HOST_CHECK = NO
RPE-02230: Debug Information: CommonProgramW6432 = C:\Program Files\Common Files
RPE-02230: Debug Information: ORACLE_SID = mdm
RPE-02230: Debug Information: DISCOVERER_ALLOW_DB_CONNECT_STRING = YES
RPE-02230: Debug Information: OWB_HOME = C:\product\11.2.0\dbhome_3
RPE-02230: Debug Information: NUMBER_OF_PROCESSORS = 2
RPE-02230: Debug Information: PUBLIC = C:\Users\Public
RPE-02230: Debug Information: PSModulePath = C:\Windows\system32\WindowsPowerShell\v1.0\Modules\
RPE-02230: Debug Information: CommonProgramFiles(x86) = C:\Program Files (x86)\Common Files
RPE-02230: Debug Information: ComSpec = C:\Windows\system32\cmd.exe
RPE-02235: The operating system has reported that it cannot execute the requested command. This may be because the command or the parameters are invalid, or that the command is shell command. Any result code return is specific to the operating system. Debug information has been produced.
Cannot run program "/usr/bin/perl": CreateProcess error=2, The system cannot find the file specified
OUBIWF_D_DEVICE_ACTIVITY_TYPE:EMAIL_FILEMGR                              1          2012-07-04 16:57:40.0Parameters
ORA-24247: network access denied by access control list (ACL)
ORA-06512: at "SYS.UTL_TCP", line 17
ORA-06512: at "SYS.UTL_TCP", line 267
ORA-06512: at "SYS.UTL_SMTP", line 161
ORA-06512: at "SYS.UTL_SMTP", line 197
ORA-06512: at line 8

Hi There
Am experiencing the same issue. Did you manage to resolve it, is so can you advice what the resolution is. Thanks
Regards,
Kayode

CAN COMPILE BUT CANNOT RUN PROGRAM

I am finally able to compile my program, I have the extensions .class, when I try to run the program I get an error message "main"java.lang.noclassdef
after message appears after I type java Saluton or whatever program I am trying to run.
Any suggestions, someone justed I use textpad, but I don't think this has anything to do with not being able to run programs, I am using windows 98 second edition.

This is a CLASSPATH problem.
For example, if your .class file is in the directory C:\javaclasses then you would set the CLASSPATH environment variable to that using:
set CLASSPATH=C:\javaclasses
Add this to your autoexec.bat and reboot so you don't have to type this every time you open a DOS prompt.
You may want to add the current directory, ., to the list of directories (use ; to separate directories).
set CLASSPATH=.;C:\javaclasses
If your class is part of a package, you have to use the directory that is the parent of the packages' directories.

I keep getting "an error occurred when installing, please run program again" for OS X mountain lion, how can i fix the problem?

i keep getting "an error occurred when installing, please run program again" for OS X mountain lion, how can i fix the problem?

The Reset feature adds a folder on your desktop named Old Firefox Data. I recommend hanging onto that for a few weeks in case you discover something essential that the Reset feature left behind.
This article has a list of what is migrated and what is not during a Reset, in case you're curious: [[Reset Firefox – easily fix most problems]].

PE 12 won't install on my Mac. Message says close running programs but none are running

Why won't Photoshop 12 for mac install? I get a message to close running programs but none listed and none are running. Tried several times including restarting computer

Tried that but nothing other than the Finder was open in activity monitor. However stumbled on the fact that Sugarsync was running although it did not show up anywhere. Closed it and installation worked!
Sent from my iPad

Running program details on Application server

Hello Experts,
How to know details of currently running program details on SAP application server ?
who executed , by which transaction , what is screen number .... etc
regards
Amy

For Current Transaction SM04 particular apps and al08 for global
Application serverwise STAD
ST03N is good tcode u can view tcode list individual application serverwise.
for all apps server select "Business Transaction analysis"
Surendra Jain

Problem with permissions, running programs and installing programs.

I've been having trouble installing and running programs. Whenever I try to install a new program I have to make sure to right-click and select "Run as Administrator", which is something that didn't happen before. And while running programs, sometimes
they don't work well (i.e. dropbox alerts me that it cannot run because of permission issues; calibre needs to run with Administrator level, otherwise it won't open my ebooks; the list goes on).
I tried using the elevated command prompt and typin secedit
/configure /cfg %windir%\inf\defltbase.inf /db defltbase.sdb /verbose to reset the permission settings, and it does not work (it tells me that some ignorable warnings occured).
There's only one account in this machine and it has administrator level.
Any thoughts?

1. First of all, it is a bad habit to work with administrator account only. Use standard user account where programs allows for it.
2. For third party programs contact respective support/forums. Some programs are not written in right way and may need admin account. I would avoid such programs.
3. Elevated rights (Run as Administrator) is natural enhancement that comes with Windows version 6.x
4. If you want to play risky role, disable UAC (not recommended). Step-by-step is here:
http://www.petri.com/disable-uac-in-windows-7.htm#
Regards
Milos

Can't Run program in Debug Mode

To: [email protected]
cc:
Subject: Can't Run program in Debug Mode
Has anyone else experienced this problem? We have written a non-express
program that uses the Express generated services project as a supplier
plan. However, when we try running this program in debug mode about 50%
(or more) of the time we abend while Forte is trying to partition the
application. Since we have many database classes in our Business Model we
are wondering if Forte is timing out during the partition phase or if the
server partition is running out of memory . The following error messages
are produced by Forte. Any suggestions???
=======================
Error messages on client:
=======================
SYSTEM ERROR: Unable to start the partition testacadprogoffer_CL0_Part1 on
any
of the nodes to which it has been assigned. See the remainder of the
error
stack for more information.
Class: qqsp_ResourceException
Error #: [1602, 593]
Detected at: qqcf_StandardConfig::LoadRemotePartition at 5
Last TOOL statement: method overview.StartApplication
Error Time: Tue Dec 02 12:56:01
Exception occurred (locally) on partition "Express_cl7_Client",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
CentralEnv.
SYSTEM ERROR: Unable to start partition testacadprogoffer_CL0_Part1 on node
admin2.
Class: qqsp_ErrorDescriptor
Error #: [1602, 592]
Detected at: qqcf_StandardConfig::LoadRemotePartition at 3
Error Time: Tue Dec 02 12:56:01
Exception occurred (locally) on partition "Express_cl7_Client",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
CentralEnv.
SYSTEM ERROR: Lost contact with remote server while trying to load
partition
testacadprogoffer_CL0_Part1. Check server log file for more information
about
the specific problem.
Class: qqsp_ResourceException
Error #: [1301, 102]
Detected at: qqem_IPartitionAgent::Startup at 5
Error Time: Tue Dec 02 12:56:01
Exception occurred (locally) on partition "Express_cl7_Client",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
CentralEnv.
INFORMATION: The connection to the partner was terminated by the
Communication
Manager for the reasons below.
Class: qqsp_DistAccessException
Detected at: qqdo_PartitionMgr::StopLocation at 1
Error Time: Tue Dec 02 12:56:00
Distributed method called: qqrt_ForteExecAgentProxy.LoadPartition!6
(object name Unnamed) from partition "Forte_Executor", (partitionId =
F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9, taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9.229]) in application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment CentralEnv
Exception occurred (locally) on partition "Express_cl7_Client",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
CentralEnv.
INFORMATION: Network partner closed connection. This usually means the
process at the other end of the wire failed. Please go look there and
find
out why.
Class: qqsp_DistAccessException
Detected at: qqcm_HoseFSM::ReceivedClose at 2
Error Time: Tue Dec 02 12:56:00
Exception occurred (locally) on partition "Express_cl7_Client",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
CentralEnv.
INFORMATION: Received close: Connection aborted (10053).
Class: qqsp_DistAccessException
Detected at: qqcm_HoseFSM::ReceivedClose at 1
Error Time: Tue Dec 02 12:56:00
Exception occurred (locally) on partition "Express_cl7_Client",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
CentralEnv.
=======================
Log messages on server:
=======================
Attached to manager for node admin2.
aud Tue Dec 2 09:34:36 : Loading partition testacadprogoffer_cl0_Part2
built on <unknown>.
Attached to manager for node admin2.
aud Tue Dec 2 09:41:58 : Shutting down partition as requested.
aud Tue Dec 2 09:41:59 : Unloaded partition testacadprogoffer_cl0_Part2.
aud Tue Dec 2 09:49:44 : Loading partition testacadprogoffer_cl0_Part2
built on <unknown>.
Attached to manager for node admin2.
aud Tue Dec 2 10:00:11 : Shutting down partition as requested.
aud Tue Dec 2 10:00:12 : Unloaded partition testacadprogoffer_cl0_Part2.
aud Tue Dec 2 10:18:34 : Loading partition testacadprogoffer_cl0_Part3
built on <unknown>.
Attached to manager for node admin2.
aud Tue Dec 2 10:27:00 : Shutting down partition as requested.
aud Tue Dec 2 10:27:00 : Unloaded partition testacadprogoffer_cl0_Part3.
aud Tue Dec 2 10:47:03 : Loading partition
EvaluateApplRequirementsBO_CL0_Part1 built on <unknown>.
Attached to manager for node admin2.
aud Tue Dec 2 11:09:26 : Shutting down partition due to failure of agent
owner's partition.
aud Tue Dec 2 11:09:26 : Shutting down partition as requested.
aud Tue Dec 2 11:09:26 : Unloaded partition
EvaluateApplRequirementsBO_CL0_Part1.
aud Tue Dec 2 12:36:14 : Loading partition testacadprogoffer_CL0_Part1
built on <unknown>.
Attached to manager for node admin2.
aud Tue Dec 2 12:45:17 : Shutting down partition as requested.
aud Tue Dec 2 12:45:17 : Unloaded partition testacadprogoffer_CL0_Part1.
FATAL ERROR: Out of Memory (reason = qqOS_MM_EX_OUT_OF_MEMORY)
FATAL ERROR: Out of Memory (reason = qqOS_MM_EX_OUT_OF_MEMORY)
Task 11: qqcm_HoseRecvServiceTask::Run: Caught unexpected exception
FATAL ERROR: ************* Out of Memory, requested (1K) available (0K)
Class: qqsp_ResourceException with ReasonCode: SP_ER_OUTOFMEMORY
Detected at: qqos_MemoryManager
Error Time: Tue Dec 2 12:49:01
Exception occurred (locally) on partition "Forte_Executor",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10f3, t
askId = [F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10f3.11]) in application
"Forte Runtime", pid 14020 on node admin2 in environ
ment CentralEnv.
FATAL ERROR: ************* Out of Memory, requested (1K) available (0K)
Class: qqsp_ResourceException with ReasonCode: SP_ER_OUTOFMEMORY
Detected at: qqos_MemoryManager
Error Time: Tue Dec 2 12:48:57
FATAL ERROR: Out of Memory (reason = qqOS_MM_EX_OUT_OF_MEMORY)
FATAL ERROR: Out of Memory (reason = qqOS_MM_EX_OUT_OF_MEMORY)
ERROR: TMgr.RunThread: task cm.Recv failed terminating.
Probably caused by a FATAL exception.
David Wilbur email: [email protected]
University of Windsor phone: 519-253-3000 ext. 2779
Windsor, Ontario Canada
-----------------------------------------------

Hi,
We have had the same problem in a non-express application
with a heavy server partition. In our case, the error was not
systematic, depending on the server workload at the time we
tried to partition and run.
The work-around we're using is to put the -fm flags (increasing the x
parameter to say 30000) in the 'server arguments' of your server
partition
properties in the partition workshop. Note that if your server is a Unix
platform,
you need to put double-quotes before and after the parenthesis in the -fm
syntax.
Hope this helps,
Vincent Figari
BTW, what Forte version are you using ?
On Tue, 2 Dec 1997 13:44:24 -0500 "David Wilbur"<[email protected]>
writes:
>
>
>
>
>
To: [email protected]
cc:
Subject: Can't Run program in Debug Mode
Has anyone else experienced this problem? We have written a
non-express
program that uses the Express generated services project as a supplier
plan. However, when we try running this program in debug mode about
50%
(or more) of the time we abend while Forte is trying to partition the
application. Since we have many database classes in our Business
Model we
are wondering if Forte is timing out during the partition phase or if
the
server partition is running out of memory . The following error
messages
are produced by Forte. Any suggestions???
=======================
Error messages on client:
=======================
SYSTEM ERROR: Unable to start the partition
testacadprogoffer_CL0_Part1 on
any
of the nodes to which it has been assigned. See the remainder of
the
error
stack for more information.
Class: qqsp_ResourceException
Error #: [1602, 593]
Detected at: qqcf_StandardConfig::LoadRemotePartition at 5
Last TOOL statement: method overview.StartApplication
Error Time: Tue Dec 02 12:56:01
Exception occurred (locally) on partition "Express_cl7_Client",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in
application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
CentralEnv.
SYSTEM ERROR: Unable to start partition testacadprogoffer_CL0_Part1 on
node
admin2.
Class: qqsp_ErrorDescriptor
Error #: [1602, 592]
Detected at: qqcf_StandardConfig::LoadRemotePartition at 3
Error Time: Tue Dec 02 12:56:01
Exception occurred (locally) on partition "Express_cl7_Client",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in
application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
CentralEnv.
SYSTEM ERROR: Lost contact with remote server while trying to load
partition
testacadprogoffer_CL0_Part1. Check server log file for more
information
about
the specific problem.
Class: qqsp_ResourceException
Error #: [1301, 102]
Detected at: qqem_IPartitionAgent::Startup at 5
Error Time: Tue Dec 02 12:56:01
Exception occurred (locally) on partition "Express_cl7_Client",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in
application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
CentralEnv.
INFORMATION: The connection to the partner was terminated by the
Communication
Manager for the reasons below.
Class: qqsp_DistAccessException
Detected at: qqdo_PartitionMgr::StopLocation at 1
Error Time: Tue Dec 02 12:56:00
Distributed method called:
qqrt_ForteExecAgentProxy.LoadPartition!6
(object name Unnamed) from partition "Forte_Executor",
(partitionId =
F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9, taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9.229]) in
application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
CentralEnv
Exception occurred (locally) on partition "Express_cl7_Client",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in
application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
CentralEnv.
INFORMATION: Network partner closed connection. This usually means
the
process at the other end of the wire failed. Please go look there
and
find
out why.
Class: qqsp_DistAccessException
Detected at: qqcm_HoseFSM::ReceivedClose at 2
Error Time: Tue Dec 02 12:56:00
Exception occurred (locally) on partition "Express_cl7_Client",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in
application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
CentralEnv.
INFORMATION: Received close: Connection aborted (10053).
Class: qqsp_DistAccessException
Detected at: qqcm_HoseFSM::ReceivedClose at 1
Error Time: Tue Dec 02 12:56:00
Exception occurred (locally) on partition "Express_cl7_Client",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in
application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
CentralEnv.
=======================
Log messages on server:
=======================
Attached to manager for node admin2.
aud Tue Dec 2 09:34:36 : Loading partition
testacadprogoffer_cl0_Part2
built on <unknown>.
Attached to manager for node admin2.
aud Tue Dec 2 09:41:58 : Shutting down partition as requested.
aud Tue Dec 2 09:41:59 : Unloaded partition
testacadprogoffer_cl0_Part2.
aud Tue Dec 2 09:49:44 : Loading partition
testacadprogoffer_cl0_Part2
built on <unknown>.
Attached to manager for node admin2.
aud Tue Dec 2 10:00:11 : Shutting down partition as requested.
aud Tue Dec 2 10:00:12 : Unloaded partition
testacadprogoffer_cl0_Part2.
aud Tue Dec 2 10:18:34 : Loading partition
testacadprogoffer_cl0_Part3
built on <unknown>.
Attached to manager for node admin2.
aud Tue Dec 2 10:27:00 : Shutting down partition as requested.
aud Tue Dec 2 10:27:00 : Unloaded partition
testacadprogoffer_cl0_Part3.
aud Tue Dec 2 10:47:03 : Loading partition
EvaluateApplRequirementsBO_CL0_Part1 built on <unknown>.
Attached to manager for node admin2.
aud Tue Dec 2 11:09:26 : Shutting down partition due to failure of
agent
owner's partition.
aud Tue Dec 2 11:09:26 : Shutting down partition as requested.
aud Tue Dec 2 11:09:26 : Unloaded partition
EvaluateApplRequirementsBO_CL0_Part1.
aud Tue Dec 2 12:36:14 : Loading partition
testacadprogoffer_CL0_Part1
built on <unknown>.
Attached to manager for node admin2.
aud Tue Dec 2 12:45:17 : Shutting down partition as requested.
aud Tue Dec 2 12:45:17 : Unloaded partition
testacadprogoffer_CL0_Part1.
FATAL ERROR: Out of Memory (reason = qqOS_MM_EX_OUT_OF_MEMORY)
FATAL ERROR: Out of Memory (reason = qqOS_MM_EX_OUT_OF_MEMORY)
Task 11: qqcm_HoseRecvServiceTask::Run: Caught unexpected exception
FATAL ERROR: ************* Out of Memory, requested (1K) available
(0K)
Class: qqsp_ResourceException with ReasonCode: SP_ER_OUTOFMEMORY
Detected at: qqos_MemoryManager
Error Time: Tue Dec 2 12:49:01
Exception occurred (locally) on partition "Forte_Executor",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10f3, t
askId = [F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10f3.11]) in
application
"Forte Runtime", pid 14020 on node admin2 in environ
ment CentralEnv.
FATAL ERROR: ************* Out of Memory, requested (1K) available
(0K)
Class: qqsp_ResourceException with ReasonCode:
SP_ER_OUTOFMEMORY
Detected at: qqos_MemoryManager
Error Time: Tue Dec 2 12:48:57
FATAL ERROR: Out of Memory (reason = qqOS_MM_EX_OUT_OF_MEMORY)
FATAL ERROR: Out of Memory (reason = qqOS_MM_EX_OUT_OF_MEMORY)
ERROR: TMgr.RunThread: task cm.Recv failed terminating.
Probably caused by a FATAL exception.
David Wilbur email: [email protected]
University of Windsor phone: 519-253-3000 ext. 2779
Windsor, Ontario Canada

Access to a FG from another running program

Group, Is there any way to "get a hold of" a reference of a functional global running inside another vi? I have a program that uses a functional global to pass data between vi's of a program. I have this program starting up as a service when I start the computer so I don't really have access to its front panel. Part of the data that the FG holds is a STOP flag and will shut down mulitple parts of this program. I would like to build another program that I can start and run at will that will set the STOP flag in the "hidden" running program. I am not sure quite how to do this.
Thanks
Todd

What you are essentially asking to do is to access an internal resouce of another program. Doesn't really matter if it's a LabVIEW program. In your case you could enable the ActiveX server for the other program so you can access the VI that way. The LabVIEW Help contains information on how to enable the ActiveX server for an app and how to use it from another application. You could also use shared variables. You can take a look at this overview for more ideas:
Community: Inter-Application Communication

I am having a problem w/ my itunes working correctly due to accidentally running Itunes through my troubleshooting, running programs made for previous versions of windows!! How do I turn it off?!??

I am having a problem w/ my Itunes working correctly, after accidentally running Itunes through my troubleshooter to, Run Programs Made For PreviousVersions of Windows. It keeps popping up that the Compatibility Version is on, to make sure it's off before opening my Itunes Account. I've looked everywhere, Please, Please, How Do I Make This Right??!??

It sounds like either your hard drive or the SATA cable that connects it to the motherboard are failing. This could be heat related in your case, which is why you see it after it runs awhile. You can take it to the Genius Bar for a free evaluation. If you decide to test it yourself, I usually suggest moving the hard drive to an external enclosure. If it works there for awhile, the cable is probably the issue.
http://www.amazon.com/Sabrent-2-5-Inch-Aluminum-Enclosure-EC-TB4P/dp/B005EIGUD4/ ref=sr_1_3?ie=UTF8&qid=1397647657&sr=8-3&keywords=2.5+enclosure
http://www.ifixit.com/Device/MacBook_Pro_13%22_Unibody_Mid_2009

Need help in using [RUN PROGRAM] Activity against a server in another domain

Hi Experts,
We have two domains with two way trust enabled. Orch server exists in DomainA and target server exists in DomainB.
We are trying to execute some scripts(g:IPCONFIG) from orch server to target server using RUN PROGRAM activity. This is running fine and give expected results, if I give Built-in Administrator credentials in Security Tab. But I'm getting some
strange values like chinese/japanese language strings, If I use a DomainB/DomainA user (Part of local admin of the target server) in security tab as well as Advanced tab-->Runas.
Things I tried:
- DomainA/DomainB user in Security Tab as well as RunAs tab  ---> Strange Strings
- DomainA/DomainB user in Security Tab and BuiltIn Administrator in RunAs tab  ---> Strange Strings
- BuiltIn Administrator in Security Tab ---> Expected result
- BuiltIn Administrator in Security Tab and DomainA/DomainB user in RunAs tab  --> ProgramExitCode = -10xxxxxx
But our requirement is to run the script on the target server as Domain User(Part of local admin).
Thanks in Advance
Thanks and Regards, Narayana Babu

Hi Experts,
We have two domains with two way trust enabled. Orch server exists in DomainA and target server exists in DomainB.
We are trying to execute some scripts(g:IPCONFIG) from orch server to target server using RUN PROGRAM activity. This is running fine and give expected results, if I give Built-in Administrator credentials in Security Tab. But I'm getting some
strange values like chinese/japanese language strings, If I use a DomainB/DomainA user (Part of local admin of the target server) in security tab as well as Advanced tab-->Runas.
Things I tried:
- DomainA/DomainB user in Security Tab as well as RunAs tab  ---> Strange Strings
- DomainA/DomainB user in Security Tab and BuiltIn Administrator in RunAs tab  ---> Strange Strings
- BuiltIn Administrator in Security Tab ---> Expected result
- BuiltIn Administrator in Security Tab and DomainA/DomainB user in RunAs tab  --> ProgramExitCode = -10xxxxxx
But our requirement is to run the script on the target server as Domain User(Part of local admin).
Thanks in Advance
Thanks and Regards, Narayana Babu

List of running programs?

Similar Messages

Maybe you are looking for