List of SAP cross client customizing settings/transactions
Hi All,
Is there a list of SAP cross client customizing settings/transactions that are allowed by SAP to directly modify in production, covered under Audit compliance?
Regards,
XIer
Edited by: XIer on Jul 10, 2009 1:44 PM
Hi All,
Is there a list of SAP cross client customizing settings/transactions that are allowed by SAP to directly modify in production, covered under Audit compliance?
Regards,
XIer
Edited by: XIer on Jul 10, 2009 1:44 PM
Similar Messages
-
SPDD "Changes to Repository or cross-client Customizing are not permitted"
Hi All,
While adjusting the std. ddic objects during upgrade from 4.6c to ECC 6 thru <b>SPDD</b>, I am getting the error message saying <b>"Changes to Repository or cross-client Customizing are not permitted" Choose 'Display object' or 'Cancel'.</b> I am making these changes in te <b>Customizing 000 client</b>
What could be the reason for this?
Helpful and timely answers will be gratefully rewarded!
Regards,
Karthik.Hi
I think there are some settings with radiobuttons in some Basis transaction where we can adjust this, basis person knows about it
see the links reg SPDD
SPDD - http://help.sap.com/saphelp_erp2005/helpdata/en/2e/6d66587d9011d396b60000e82de14a/frameset.htm
SPAU and SPDD
http://www.sap-img.com/bc018.htm
Please refer the link,
Transaccion SPDD and SPAU
explaination of SPDD
Transaccion SPDD and SPAU
about spau & spdd
explaination of SPDD
Transaccion SPDD and SPAU
about spau & spdd
Regards
Anji -
Cross-client customizing are not permitted
Hi,
I am trying to remove "Transformation Object" in BI 7.0, QA server, and it not allowe to me access, I have SAP_ALL access
I am getting this error messages:
"changes to repository or cross-client customizing are not permitted"
I know we can't change anyitng in QA its goes through Transport, but the problem is DEV system this objects didn't show and QA this objects shows, so I want to remove this bi object from QA system
I know while installation NW 2004s its post installation steps to not change objects
in SE06 I am trying to change these objects to modifible but still not allow to changeable
please help me outHi Angeline,
In transaction SCC4 double click the client on which you are working. There will be a setting "Changes to repository or cross-client customizing are not permitted." Modify this option to "Automatic recording of changes."
Making that will allow you to delete the object.
Make sure after you achieve your desired objective, you revert back the client settings to "Changes to repository or cross-client customizing are not permitted." Also revert back the settings in SE06 in QA to the original what you had in post installation.
Regards
Sourabh Majumdar -
Error Changes to Repository or cross-client Customizing are not permitted
Hi
While creating infoset in SQ02 it is giving an error as "Changes to Repository or cross-client Customizing are not permitted"
I did change the SE06 system change options , software components modifiable.
And I also changed the objects changebility in transport connections in RSA1. But still it is giving the same error.....
Can you please let me know the solution?
ThanksI'm assuming that you're creating a custom InfoCube query, so does it give you the option of creating as a Local Object (package $TMP) or one of your custom, transportable packages? Basically it's determining whether you want this InfoSet Query to be a Local Object or if you plan on transporting it throughout the landscape.
One other thing that I wanted to point out about security. SAP_ALL doesn't necessarily mean access to anything and everything. There are cases where the Authorizations assigned to an SAP_ALL Authorization Object don't necessarily have all of the correct assigned Activity for every transaction. Security, in your case, doesn't seem to be the problem because you're getting this request to assign a package.
Edited by: Dennis Scoville on Nov 4, 2009 2:39 PM -
Field exit showing---not allowed to change cross client customizing
hi all ,
when im trying to activate field exit . Its showing---not allowed to change cross client customizing.
how to correct that.
thanks in advance.
sghi SG,
first and foremost thing while using field exit is, ask your basis person to include the parameter abap/fieldexit = Y in your instance profile.
Otherwise u can't use the field exits.
Regards....
Arun.
Reward points if useful. -
Cross client customizing factory calander
Dear All,
I have been reported by PP consultant that he is unable to create factory calender on "sandbox system(100) without automatic recording". Then I have opened cross client customizing on my sandbox.
Now, I need change request of that cutomizing in my golden client(200).
Regards
DharmendraDear ,
i think you wont be getting the Request for the same .
you need to configure the same directly in the "required Client" using Scal tcode .
Regards -
Hi all,
Please let me know the process to track or find all the SAP Standard and custom objects. that got changed from a specific point of time.
Is there any function module or any table where this change log is maintained.?
I just only need the details ,wheather that SAP standard or Custom object has got changed or not.
Thanks in advanceHi RK v ,
I really don't know what your actual requirement is , but if you want to know the objects as per the modification , then transport request will be much help to you .
Have a look into table E070 and E071 .
Regards ,
Yogendra Bhaskar -
List of SAP PI 7.0 ABAP transactions
Hi,
Can any one proivde me the list of all transactions codes , that will be used for SAP PI 7.0 ABAP system.
Do we have any blog or thread which talks about these transactions.
Thanks,
YounusHi,
Please go through the below weblog for the same:
/people/morten.wittrock/blog/2006/03/23/getting-started-with-xi-part-1-xi-30-cheat-sheet
/people/community.user/blog/2007/02/21/ready-reference-for-xi-developers
SLDCHECK Test SLD Connection
SXMB_IFR Start Integration Builder
IDX5 IDoc Adapter - Monitoring
IDX2 Meta Data Overview in IDoc Adapter
IDX1 Port Maintenance in IDoc Adapter
SM59 RFC Destinations (Display/Maintain)
SM58 Asynchronous RFC Error Log
SPROXY ABAP Proxy Generation
SALE Display ALE Customizing
WE21 Port definition
WE20 Partner Profiles
SE80 Object Navigator
RZ20 CCMS Monitoring
SXI_MONITOR XI: Message Monitoring
SXI_CACHE XI Directory Cache
SPROXY ABAP Proxy Generation
SXMB_MONI Integration Engine - Monitoring
SE16 Data Browser
SE11 ABAP Dictionary
SE37 ABAP Function Modules
SE38 ABAP Editor
SM31 Call View Maintenance Like SM30
SM30 Call View Maintenance
SE38 ABAP Editor
SMICM ICM Monitor
ST05 Performance trace
AL11 Display SAP Directories
SM12 Display and Delete Locks
SM49 Execute external OS commands
SM69 Maintain External OS Commands
SLDAPICUST SLD API Customizing
AL11 Display SAP Directories
SU01 User Maintenance
SMGW Gateway Monitor
Thnx
Chirag -
Changes to Repository or cross-client Customizing are not permitted
Hi All,
Transaction OB52 is a transportable activity, therefore we created maintenance view of table T001 which user can maintain in QAS and PRD servers.
In similar fashion, we created maintenance view of customized table, but on modifying it in QAS, prompts the subject error.
Any particular reason of why it is not appearing for the first maintenance view and why is it prompting to second maintenance view only.
I checked SCC4 and SE06 and found everything "Not modifiable"
Please advise.This is the general manner of QAS and PRO client settings, Contact your BASIS admin to get more clarification on this.
And normally you have to make the changes in OB52 in DEv and transport to QAS and PRO, why you are trying to use this in dif mode?
Regards,
Nick Loy -
'Changes to reposotory or cross client custimizing is not permitted'.
Hi,
I am trying to activate datasources at r/3 side.
I am getting message that 'Changes to reposotory or cross client custimizing is not permitted'.
I cant understand that why this is happening.
I feel that it is because of cleint is lock or not changeable.
So how to check that client is locked. OR how to resolve this problem.Hi,
If you are trying to do this in R/3 production system, obviously you will get this messaage because most production systems are locked and no customization or chagnes are allowed. If you are getting this message in R/3 development system then you need to change the settings to allow customization. Use Transaction code SCC4, click on the pencil, click on continue, double click on the appropriate client, choose second option in changes and transports for client-specific objects. Now choose "Changes to reporsitory andd cross-client customizing allowed" from the first drop down list and save it.
Hope it will help.
Regards,
Rao. -
Client independent settings / crioss client
Hi all
How do i identify the clint independent/ cross client settings in sap ?
Any table ?
Regards
Swapnil
Edited by: swapnil kelkar on Nov 28, 2009 12:06 PMHi Swapnil,
Your question is wrong...as client independent and cross client both are same
Client dependant and cross client customizing are different
All client dependant changes will effect only working client, and all cross client changes will effects entire system.
All cross client setting get store in T* tables (ex"T000)....
Regards
Nick Loy -
Cross Client Customzing - Define Printer
Hello all,
As far as I know, defining a new printer in SAP system is belonging to the cross-client customizing.
But one thing I am confusing about:
I choose 'No changes to Repository and cross-client costuming objs', however I still can create and delete printers.
Can somebody know what happened? If my understanding is wrong, please kindly let me know.
Thanks & Best Regards,
Tong NingHi sir,
Related the configurations (SPAD--Printer) there is no cross client options or client specific options. You can use different printers at different or same locations based on your available resources and can use any printer either it is local/Remote. There is no such options for printer configurations. The options in SCC4 bare only for the foreign and program changes.
See the below links for detailed information and issues regarding the printer configurations.
printer configuration issue
How to Configure Printer in SAP - Basis Corner - SCN Wiki
default printer settings in SAP
Printer Configuration
I think this information will help u.
Regards,
Harsha. -
How to disable Cross client Table Access
Hi All,
i have created a Sand box client and i have set its cross client object value to
"No Changes to repository and cross client customizing objs"
but still users are able to run transactions like SR13 which are cross client tables
please helpHI Zeeshan,
Once u run the Tcode like SR13, the users would be able to enter the Tcode and have a new entry varinat created..but during SAVE the system would sure prompt the message... " Changes to Repository or cross-client Customizing are not allowed. Please press DISPLAY or CANCEL" ..
so the changes would not be saved hence forth and have to be cancelled out..
hope this is what u have been looking for..
Br,
Sri
Award points for helpful answers -
Hi
What are cross-client applications?
Thanks in advanceCross Client :
Under SAP Technical Systems, Cross client customizing will provide <b>data to all the clients</b>..hence it is applicable for all the <b>repository objects</b> under difeerent modules such as FI - Finance, CO - Accounting, MM - Material Management, SD - Sales and Distribution....
different clients such as 100 - Developing, 200 Testing, 300 - Quality, 400 - Production and 999 - Sand box......., the data can be trasnferred easily
i hope this information is useful to u...
reward if useful...
Ginni. -
hai
waht is meant by cross client while defining new table?
hav a nice timeHi,
The changes that you make in the ABAP Workbench are placed in the Repository tables of the SAP database. The contents of these tables are known as Repository data or Repository objects. Apart from a few exceptions, the Repository data is cross-client. As with cross-client Customizing, changes to Repository objects affect all clients of an SAP System
Tables which are having MANDT field is called as client dependent tables. Tables which are not having MANDT field is called as client dependent tables.
Client independent
a table/object that is valid for all clients in a system. E.g table SCC4. This table will be the same no matter which client you view it from. If you try to make changes in SCC4, you'll get a popup with a warning that the table is cross client.
Client dependent
a table/object that is only valid for the client it is changed in. E.g the user tables USR*. You have to create users in each client.
Hope it helps. Please reward if useful.
Thanks & Regards
Sadhu Kishore
Maybe you are looking for
-
Extension list not showing in 16.0.2
After upgrading to v16.0.2 my list of installed extensions is empty even though most (probably all) are still working, so I cannot manage them.
-
Hi all, I use Oracle Developer Suite 10.1.2.0.2 on XP platform. When I start any form I get this error massage: FRM-40039: Cannot attach library webutil while opening form MYFORM1. I compile webutil.pll (Shift+Ctrl+K and Ctrl+T to generate PLX) and t
-
Using Font Folio in InDesign to export in PDF to app store
Our customer is creating applications using In Design. These applications are exported into PDF format for viewing on mobile devices. Is there any additional licensing needed from Adobe in this scenario? Also, in the future (not now) if the cus
-
This is an old 3/4 inch newsroom tape where they put one side of the story on the left channel and the SOF part on the right channel, so it bounces back and forth as you listen. I captured it in one stereo track but I don't see anyway to combine them
-
How to set summable field in ALV
Dear ABAPers, I find report that use ALV to show the output. Using my id the field with number type is summable (using ALV sum functionality) but using other id, it can't. Does anyone know how to set this functionality? I read several posting that th