List of services activated

Hello Expert,
Do someone know if a report exist to list all my services activated in SICF, i need to compare all the services activated in my environment.
Thanks for your answers
Williams

Hi Williams,
Have a look at this link.  Let me know if this is what you are looking for:
http://www.se80.co.uk/sapreports/a/aql4/aql4systqv000100z_sicf========.htm
Thanks,
MJ

Similar Messages

  • Creating smartform from attachment list of service object

    Hi,
       How can i create a smartform containing attachment list from generic object services(active workflow Box) in tcode VA02, Also let me know in which table this attachment lists are stored.
    Thanks,
       JP

    I found following Solution:
    I copied the following classes and changed them in some way to fit my requirements:
    1.CL_GOS_ATTACHMENTS
    2.CL_GOS_SRV_ATTACHMENT_LIST
    3.CL_LIST_BROWSER
    Changes to the Classes:
    1.Type of the attribute GO_INSTANCE changed to ZCL_GOS_ATTACHMENTS.
       Changed method INIT_BROWSER:
    go_browser ?=
        zcl_list_browser=>zcreate_browser( cl_browser=>gc_list_browser ).
    2.Type of the attribute GO_ATTACHMENT_LIST changed to ZCL_GOS_ATTACHMENTS
    3. Copied Method CREATE_BROWSER of Class CL_BROWSER to ZCREATE_BROWSER:
    method zcreate_browser.
      case ip_btype.
        when gc_list_browser.
          *create object ro_browser type zcl_list_browser.*
        when gc_tree_browser.
          create object ro_browser type cl_tree_column_browser.
        when others.
          raise exception type cx_sobl_browser
            exporting
              gp_error = cx_sobl_browser=>gc_wrong_type
          exit.
      endcase.
    endmethod.
    Modified the code of method ___DISPLAY to my needs.

  • In Mail, is there a way to print the list of mail activity in a folder without actually printing each email?

    In Mail, is there a way to print the list of mail activity in a folder without actually printing each email?
    Thanks to all.

    Actually, I noticed in "More Like This" questions similar to mine.  One of the suggestions worked perfectly.
    Command Shift 4 turns the arrow into a target scope.  Use it to take a screen shot of the area you want printed.  Thanks to all.

  • Error  while putting service activity

    Hi experts,
    On puting service activity in a network, system has given following message 'Error in committment check (See costing log)'. Cost log says 'Planning level M1 does not exist' please correct your entry or maintain the planning level.
    I'm sure this is not in connection with the budget availability control because the control is not active.
    What could have gone wrong?
    Has anyone got some idea?
    Thanks,
    Mohan Parab

    Issue resolved.
    Planning group in CFM was disturbed.
    Regards,
    Mohan Parab

  • Purchase requisition for service activity / element cannot be generated

    Dear SAP MM Experts,
    This is a service Creation from the PM order to Purchase Sercive Requisition.
    The Error Message Is Generated :Purchase requisition for service activity / element cannot be generated
    Diagnosis
         Due to the system settings, the system is trying to generate a purchase
         requisition for a service activity or a service activity element.
    No service package has been created for the activity/element.
    As a result, the system cannot generate a purchase requisition.
    The activity/element is created or released, but the indicator for
    generating a purchase requisition is not set.
    Create a service package for the activity/element and then generate a
    purchase requisition.
    regards,
    A S

    Solved From PM side

  • Attachment list in Services for Object toolbar

    Does anybody know if there is any user exit or BADI that I can use to filter certain file attachments in Attachment list of Services for Object toolbar.
    For example, in transaction XK03 (Vendor display), Services for Object toolbar, you can see the Attachment list and it will display list of pc file attachments, however, we have a requirement to display only those that met certain criteria, is there any BADI or user exit for this?
    Thanks in advance for your help.

    you can use BADI
    GOS_SRV_SELECT
    for this.
    Regards
    Raja

  • Disable pushbuttons from Attachment list for Service Object

    Hi,
    I want to disable push buttons for delete and edit from the toolbar of Attachment list from service objects.
    how can this be achieved ?
    thanks in advance.
    Best Regards,
    Vinayaka

    Hi Sandeep,
    I am not totallt getting your point but can suggest following points:
    1. Check whether these object are displaying in DIR's as object links.
    2. If it is there then it shoud be displayed in document data of those objects.
    3. Check that documents are properly checked-in.
    Hope this may help.
    Regards,
    Ravindra

  • Problem while assigning service activity to WBS

    when i assign service activity to WBS element without filling any fields (like Purchase groupand Material group) it is going straight to Service Specifications.
    if we fill the service specifications and save the project we can save the project with out any errors
    i require entry of PurchaseGroup and Material Group is mandatory
    and then system should go to Service specifications
    Please advice

    Hi,
    Just check in Network profile, on Activity tab (TC: OPUU). You must have maintained required details like Material group, Purchasing group etc in Service activity section. Whenever you create a service activity these values get defaulted in activty. Let me know if it solves your problem.
    Reward points if helpful.
    Regards
    Message was edited by:
            Shrikant Rakate

  • List of service orders including partner functions assigned

    Hi gurus,
    We were trying to get from IW39 report a list of service orders with partners assigned in partner functions, but doesn´t seem to be possible.
    Do you know how to get such a list?
    Best regards,
    VL

    Hi,
    You can use the multi-level list IW40. Use the 'filters' to choose which objects you want to see including partners.
    -Paul

  • TAXINN procedure - Key combination : Plant/Vendor/Service Activity?

    Hi FI experts,
    I wud like to have key combination for Tax conditions maintained at FV11, as per the following
    Plant / Vendor / Service Activity number
    Kindly revert whether the above is possible to configure or not. We are using Taxinn procedure. Itemwise/service levelwise the tax can be taken care thru FV11?
    Currently i am using the following and facing issues because the activities linked to material group.
    Plant / Vendor / Material Group
    Please help
    Thanx in advance
    Srihari

    With the help of SAP labs, the issue has been resolved by activating Taxes at services level in ESM.

  • Service Activity Number changed

    While creating service Purchase Order with reference to service purchase requisition, user change the service activity number adopted from the purchase requisition. How to restrict this.

    Hi,
       If you maintain the field as display only at service level, the same will be as display only for all users and you cant create PO with service number without reference documents like PR.
       If you want to restrict the service number change for only some users, then you may go for a transaction variant. You may create a transaction variant for ME21N using SHD0 transaction and maintain the service number as display only as shown below.
       Assign the variant for the required user ID's. Refer the link: Learning SHD0 with Example
       If you want to restrict the service number change, only in case the PO is created from PR; then you need to go for development and write the logic accordingly. You may check the BAdI: ME_PROCESS_PO_CUST
    Regards,
    AKPT

  • Confirmation of Service activity Thru Service Entry sheet.

    Hi!
    We are releasing Purchase Requsitions thru service activity in our projects.Subsequently these PRs are converted to POs & finally we are maintaining service entry sheet for acceptance of service in service entry sheet.
    Our issue is that we want the service activity to get automatically confirmed once we accept the service in service entry sheet.Presently we are doin it manually.
    Please suggest nescessary configuration or process to achieve the above.
    Regards,
    Seemant

    Hi,
    In CATS network activity will be confirmed as soon as time is entered.CATS module there is integration between HR & PS module. Time will be entered by employee against network activity / WBSE etc. This time entered can be approved & the same will be transferred to CO / PS for posting actual cost / time etc. Please refer below URL to know more details on CATS.
    http://help.sap.com/saphelp_erp60_sp/helpdata/en/64/400b2b470211d189720000e8322d00/frameset.htm
    Hope this will help you.
    Regards,
    Rakesh Pradhan

  • Web Service Activity problem

    Hi,
    I want used the "Invoke Web Service" activity but my "WSDL URL" don't work.
    However, when I put my url (http://172.31.194.112:8080/contactRH/services/ContactRHAccess?wsdl) on IE, I can read my web service.
    I think that don't work because this url have a bad type.
    So, how can I load my web Service ?
    Thanks

    Hi,
    Thanks,I have found the problem (type="xsd:string" and not type="xsd:String").
    But, if I try to use an internet webservice (http://www.webservicex.net:85/LloydsRiskCodeService.asmx?wsdl or
    http://api.google.com/GoogleSearch.wsdl) that doesn't work (connection timed out :connect or connection reset).
    But if I use this web service on my computer, that work.(C:\...\name.wsdl).
    So, when I say "that work" that mean my WSDL URL is loaded.
    Is it normal?
    Thanks.

  • Sxmb_moni - selction lists for service, interface etc. are empty

    If I use the transaction sxmb_moni at XI/PI systems it is possible to get such lists of services, interfaces and namespaces if I use the selection help at the selection screen. If I click at the selection help of the sender interface column I get all my sender interfaces.
    If I do the same at one of my SAP applications systems I always get the message "No values found" Is this normal (by design) or is there a configuration error?

    >
    Carlos Gonzalez wrote:
    > Hi Gil,
    >
    > It is normal (by design).
    >
    > However, you can monitor your proxys (applications systems)
    > from RW in XI system. In message monitoring, select in 'Messages from component':
    > your proxy: ' Proxy Runtime XXX...'
    >
    >
    > CArlos
    Thanks Carlos, that was the answer of my question. I've assumed this allready.
    Edited by: Gil Ritter on Oct 15, 2008 11:09 AM

  • I want to get List of all active sessions in current system

    Hi experts
    How to get list of all active sessions in current system in any internal table along with details.
    A sample code wud be helpful
    Thanks in advance.

    try this code it might help u.
    Below report execution gets the active Session list to ABAP memory
    submit rsm04000_alv and return exporting list to memory.
    refresh: gt_listobj.
    Below FM get the List output from ABAP memory to gt_listobj in HEX
    call function 'LIST_FROM_MEMORY'
      tables
        listobject = gt_listobj
      exceptions
        not_found  = 1
        others     = 2.
    if sy-subrc <> 0. " Executed successfully ?
      message id sy-msgid type sy-msgty number sy-msgno
      with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    endif.
    This FM converts ITAB gt_listobj from HEX to ASCII
    call function 'LIST_TO_ASCI'
      tables
        listasci           = it_list
        listobject         = gt_listobj
      exceptions
        empty_list         = 1
        list_index_invalid = 2
        others             = 3.
    if sy-subrc <> 0. " Executed successfully ?
      message id sy-msgid type sy-msgty number sy-msgno
      with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    endif.
    This Shows the output in List format on screen
    call function 'REUSE_ALV_LIST_DISPLAY'
    exporting
       i_structure_name                  = 'line'
      tables
        t_outtab                          = it_list
    exceptions
       program_error                     = 1
       others                            = 2.
    if sy-subrc <> 0. " Executed successfully ?
    message id sy-msgid type sy-msgty number sy-msgno
             with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    endif.

Maybe you are looking for