List of Standard BC sets for OM and PA

hi ,
Request you to help me with any standard list of OM and PA BC sets.....Hope for your reply soon...
Thanks,
Sonu

Check with BC Sets is activated or not through tcode SCPR20PR...If it not activated then activate with Tcode SCPR20..
BC Sets for HR
EA-HR-MENU
EA-HR-AKH
EA-HR-IMG
Check with SAP Notes as well..
855959 - Activation of Extension Sets via SPRO not successful
719694 - Activating BC Sets in the production system
Mohan

Similar Messages

How to Modify the standard layout set for Sales Order

Hi all,
Do we have any sap defined standard to modify the sales order,if no How to Modify the standard layout set for Sales Order,an also plz send me the step by step procedure for the same.
Thanks in advance
Santosh R

Hi, Dear Ferry Lianto,
Thank you very much.
Commonly I know the total pricing procedures.
But, would you please tell me how to control the CURRENCY for the subitem of a condition type as follows?
For example, I can see the following kind of
contents in the Tab:condition of a sales order:
PR00     Price     130.00000      TEST     100
     Gross Value     20.12      USD     100 <-how to
     Discount Amount     0.00      USD     100
     Rebate Basis     20.12      USD     100
     Net Value for Item     20.12      USD     100
     Net Value 2     20.12      USD     100
     Net Value 3     20.12      USD     100
VPRS     Cost     27.22      HKD
     Profit Margin     16.61      USD
The currency of PR00:price can be controlled via tcode VK12; but how to control the currency of its subitem such as gross value, discount amountm, net value for item, net value 2, & net calue 3...
Thanks and regards.

Standard rule-set for IS-H solution

Hello all,
I would like to have the standard rule-set for IS-H solution (Healthcare). I know that it should be developed by the business owners, technical team and auditors, but It will be a helpfull resource as a start point.
I would appreciate if any of you may share with me.
Thanks and regards!

Hi Marina,
The basis rule set will contain only basis relevant risks, which as you say will apply only for the backend.
There are no default rulesets for reports. I am pretty sure you could create a custom ruleset for BW reports, if you wanted to.
Regards,
Chinmaya

I updated Itunes today to the latest version. Windows 7 64bit. None of my drivers work and get an error when itunes starts, about registry setting for reading and writing dvds and cds missing. Anyone else have the same issue. I downloaded itunes again, re

I updated Itunes today to the latest version. Windows 7 64bit. None of my drivers work and get an error when itunes starts, about registry setting for reading and writing dvds and cds missing. Anyone else have the same issue. I downloaded itunes again, reinstalled still have same issue.

I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
iTunes for Windows: "Registry settings" warning when opening iTunes

SAP Standard Field Attributes for ME21n and ME

Hi,
Can anyone suggest me where i can see all the display,Hidden,Mandatory, optional SAP Standard field attributes for ME21N and ME51N.
I looking for Configuration settings
Thanks
Venki

Hi ,
All i see is Field Label Reqd.entry Opt. entry Display for ME21N and ME51N
I want to see what SAP Standard Fields are Hidden for these T-codes.
I want to use and Non Used Field ( Hidden SAP Field) for new Enhancement instead of creating a custom Tab
Thanks
Venki

ON RESTORING 1601 ERROR COMING HOE WE SET SECURE SETTING FOR RESTORE AND UPDATE

ON RESTORING 1601 ERROR COMING HOE WE SET SECURE SETTING FOR RESTORE AND UPDATE

If you don't have a sim card in the phone, you won't be able to activate it. You can't activate any GSM iPhone without a valid sim card installed in the phone. The sim itself need not be activated, but it must be valid & present.

Need Help for a ODBC Registry Setting for CR11 and CR2008 for Joins

I have used CR for a longtime. I currently have CR11 and CR12.
I want to access Clarion files that are the TPS Access Method.
There's a PDF called Cr9_Left_outer_join.pdf that's located at: http://www.radventure.nl/Portals/0/cr9_left_outer_join.pdf
This shows how to do the registry setting for a number of DBMSs/Access Methods such as TopSpeed. See PDF page 3
The registry settings that the paper describes are NOT in CR 12.
Can anybody help me find the right registry KEY and what the correct setting is supposed to be?
Thanks in advance.
Regards,
Mike Gorman

Hi Mike,
Not sure where you put or created that registry key but this is what it should look like:
HKEY_CURRENT_USER\Software\Business Objects\Suite 12.0\Crystal Reports\Database\ODBC
Then create a String Value called - "ODBC Behavior" and the value is 2, or 3 if and when you can use ODBC level 3.
Close Crystal before changing any of our key values, CR will write the previous version back to the registry when closing.
Also, be aware that what ever ODBC Level 2 ( ANSII 89 ) limitations are is what that driver and CR will be limited to. Example is Left Outer Joins are limited to only one in the SQL Statement and no way around this. You should be asking them to update to ODBC 3 ( ANSII 92 standards )
Crystal dynamically reads in the ODBC client functionality and therefore no over rides in CR will make the client work, if the ODBC driver is not capable then CR is also not capable.
Your other options is to go to Microsofts site and download their OLE DB developers package and create your own OLE DB driver, or find a developer willing to do this for you. Microsoft fully supports OLE DB and I believe they are trying to discourage ODBC usage.
Another option is to use a front end app to export the data into temporary MS Access tables and then create your reports off of those MDB file. MS Access at least supports ODBC 3 so you will be able to use full join syntax and functionality. Or even better is to move to MS SQL Server which is us to date and fully support all connection methods.
Thanks again
Don

List of Standard Oracle Reports for US Government

Any idea on the list of Oracle standard reports used by HR Dept to submit to US Government as a part of legal requirement.
Please suggest if you have any Metalink Doc ID or other documentation.

Thanks Octavio,
Forgot to mention that I found that list, what I want to do is list the available Standard RXi reports and copy them into a spreadsheet.
I need a list of standard reports to show to the business, I found a list from an older version via appendix in 115finrxi Rel 11i - which identifies which report to which module, e.g. GL, AR, AP, etc.
I managed to copy these but somehow doesn't tie up with the LOV in Set up within Report eXchange Responsibility. This LOV has more & gonna take a while to cross check & identify which modules these belong to and wanted to know if there's a way to export these into an excel spreadsheet from an LOV.
I don't have SQL access to run a script & extract these list of reports, so I was curious if there's a documentation anyone has come across that has the list of RXi reports as per previous Oracle Financials RXi Reports Administration Tool User Guide Release 11i May, 2000 Part No. A81232-02.
any assistance, recommendations would be greatly appreciated.
Thanks heaps. :)
Nathaniel

Standard data sources for Delivery and Purchase order quantity.

Hi gurus ,
Are there any standard data sources available for Delivery and Purchase Order quantity in Purchasing area .
Thanks in advance .

Hi,
If you are looking for SD Scenario: Check this : https://websmp201.sap-ag.de/~form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700002719062002E
Happy Tony

Expdp with network_link and different character sets for source and target?

DB versions 10.2 and 10.1
Is there any limitation for implementing expdp with network_link but target and source have different character sets?
I tried with many combinations, but only had success when target and source have the same character sets. In other combinations there was invalid character set conversion (loose of some characters in VARCHAR2 and CLOB fields).
I didn't find anything on the internet, forums or Oracle documentation. There was only limitation for transportable tablespace mode export (Database Utilities).
Thanks

Hi DBA-One
This link
http://download-east.oracle.com/docs/cd/B19306_01/server.102/b14215/dp_overview.htm#CEGFCFFI
is from Database Utilities 10g Release 2 (10.2) (I read it many times)
There is only one thing about different character sets.
I quote:
Data Pump supports character set conversion for both direct path and external tables. Most of the restrictions that exist for character set conversions in the original Import utility do not apply to Data Pump. The one case in which character set conversions are not supported under the Data Pump is when using transportable tablespaces.
Parameter VERSION also doesn't play role here, because the behaviour (character set) is the same if I use for target and source only 10.2 or (10.2 and 10.1) respectivly.

Solution Manager BC sets for Oil and Gas Downstream

I am trying to find the oil and gas BC sets for downstream so I can get the basic SSR config done via a CATT script. How do I find them and install them on Solution Manager. I have tried looking at the BC sets I have but I can not see any for Oil, OGSD or SSR.

Having a similar issue , please share the solution once you find one

Visa read object difference parity setting for PC and TPC2012 device

Hello,
we found some difference between application running in PC and runing in TPC2012 device.
We tested modbus communication via RS485 (9600b/s, 8bits, parity even) between PLC(master) and TPC2012 (slave). We used Visa read object and set parity to Even via property node. From the PLC we sent request to device and in our application we only read the data from PLC and displayed it (8bytes) on sreen.
If we tested the application on PC everything worked fine. But if we compiled application and ran it in TPC2012 device the data was different (for example if I sent request from PLC to slave 05 03 00 01 00 01 crc crc on the TCP I saw 00 03 00 01 00 01 crc crc. The crc on TPC wasn't equal to crc on PLC.
We found that problem was in VISA read setiing for read data in TPC device. If we set parity to SPACE (instead of EVEN) then we read data correctly.
Modbus - Parity set for VISA read object:
Master PLC (even) - PC (even) -> visa read - data are equal
Master PLC (even) - TPC (even) -> visa read - data aren't equal
Master PLC (even) - TPC (space)-> visa read - data are equal
PC: Win XP SP2, LabView 8.5 with LabView TP module 8.5.
TPC2012: WinCE 5.0, NI visa 4.2, NI TPC Service 1.0.
Best regards,
Pavel Rucka.

I just found out that the VI for the currentmeasurement with the keithley 6517a has the same error but still works fine. Now I also tried to adjust the serial data bit and parity settings via the VISA configure serial port function but still no improvements.

HT5312 after I entered the password of my iCloud ID, it prompted out asking me to check email from an emai address that I did not set for rescure and then I cannot login? now my iPhone has got all the cotacts lost.

after I entered the password of my iCloud ID, it prompted out asking me to check email from an emai address that I did not set for rescure? and then I cannot login.

Try going to https//appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Tap edit next to the primary email account, tap Edit, change it back to your old email address and save the change. Then edit the name of the account to change it back to your old email address. You can now use your current password to turn off Find My iPhone on your device, even though it prompts you for the password for your old account ID. Then go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud). Next, go back to https//appleid.apple.com and change your primary email address and iCloud ID name back to the way it was. Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.

Sorting with layout set for NewsBrowser and custom made properties

Hi
I have developed some custom made properties that is used for each document based on XML Form. But how can I obtain a custom sorting order based on my properties.
After created a document I define some properties for company, department and process. And using the layout set for NewsBrowser I will have my documents sorted due to my processes. Lets say that I have set the properties for the process for some documents, e.g. SA1010, SA1010-1, SA1010-1a, how to obtain this sorting order in a KM-Navigation-iView using layout set for NewsBrowser?
Regards
Kay-Arne
Message was edited by: Kay-Arne S. Aarlie

Hi Kay-Arne,
A namespace defines a system area in which a property (defined by a property ID) is allowed to exist only once. So for your own predefined properties you should use an own namespace in order to be able to use a Property ID that is already available in another namespace. Check this link for more info:
http://help.sap.com/saphelp_nw04/helpdata/en/1a/9a4a3b80f2ec40aa7456bc87a94259/frameset.htm
In the Property Definition you later use the Namespace Alias. This alias (with ":PropertyID") you would also use in the LayoutSet Parameter mentioned above.
Hope this clarify things ,
Robert

Standard form name for QM01 and QM02 ?

Hi,
Can someone tell me the standard form form name (print program) for transaction QM01 ?
How do I find standard form name for any transaction ?
Prompt replies will be awarded.
Tushar.

QM_NOTIF_OVERVW1

List of Standard BC sets for OM and PA

Similar Messages

Maybe you are looking for