List of terms with definitions

Is there a list somewhere of XCODE programming language terms with definitions? For example the terms IBAction or NSString. I see those all the time but don't know what they mean or what they do but there are a lot of terms like that and it would be great to have a list of definitions.

Everything is defined in the Xcode documentation. Look in Organizer.

Similar Messages

Listing foreign keys with non matching column definitions

Dear All,
I seen an entry in DBA weeky activities s that "Listing foreign keys with non matching column definitions" . What is meant by that?. How to pick up that?
Shiju

I seen an entry in DBA weeky activities s that
"Listing foreign keys with non matching column
definitions" . What is meant by that?. How to pick up
that?Most probably find columns which are part of foreign keys, but their respective primary key column have different length (AFAIK data type cannot be different).
Data dictionary can help you in that, I'll give you hints where to look at:
user/all/dba_constraints - foreign and primary keys
user/all/dba_cons_columns - columns which are part of constraints
user/all/dba_tab_columns - column definitions of tables
However creating query from these data dictionary views could be a nice task for you :)
Gints Plivna
http://www.gplivna.eu

Report: list of computers with out dated antivirus definitions

Is there a report in SCCM to list all machines with outdated antivirus (SC End Point Protection) ?
I believe SCCM take out such machine out of network through security center information even if third part antivirus is installed.
But can we get that as report as well ? list of computers
Shahid Roofi

Yes, I know this is an old post, but I’m trying to clean them up.
I would start by looking at the built-in report found within the Endpoint Protection SSRS folder.
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

SQL Data Modeler Terms and Definitions

Hello All,
I am new to using the SQL Data Modeler and I was wondering if someone could point me to a list of definitions of terms that are used throughout the SQL Data Modeler interface. The help documentation does not seem to define most of the terms that are used in the product.
Thanks in advance,
Craig

The Oracle SQL Developer Data Modeler help and the Data Modeler User's Guide, which shares content with the help, don't contain a glossary or list of terms. If the terms you're looking for are Oracle Database terms (such as definitions of tables and other database objects), the SQL Developer help and its user's guide do include brief definitions (in the Database Objects topic).
For other kinds of terms, the Data Modeler help does point to the Object Management Group (OMG) site, and perhaps the OMG Terms and Acronyms page ( http://www.omg.org/gettingstarted/terms_and_acronyms.htm) might help you. However, there's no guarantee that those definitions will completely apply to the Oracle SQL Developer Data Modeler tool.
For definitions or explanations of specific terms of interest, I recommend searching for (or using the Table of Contents to find) the relevant topics. You can also ask about specific terms or about terms in general in the Data Modeler discussion forum: SQL Developer Data Modeler forum: SQL Developer Data Modeler

PMT Terms with Cash Discount

FI Experts,
I created a new payment term with a 1% discount if paid whithin 10 days. Can some one give me some steps as to what else needs to be configured in order to have this difference deducted at the time of payment run. I know have to set-up an account but not sure what fields I have to check in order to make it work.
1- Create new payment terms
2- I defined a G/L account for cash discount
Can some one tell me when I set-up the account if I have to set-it up a certain way? in FS00.
Thank You for your help.
Edited by: Frank on Feb 9, 2009 10:42 PM

Good to know that it is working. When you maintain payment term in vendor master, it SHOULD get defaulted when you perform FB60 for that vendor in that company code. Payment term for vendor cannot be maintained in General Data section, it is in Company code segment. Are you sure you are performing FB60 for the vendor in the company code in which you maintained payment term for that vendor in vendor master record? Please recheck. Also, if you have payment term in Purchasing Organization segment in vendor master record, it would not get defaulted in FB60. Here is what SAP help says on payment term field in vendor master record.
In most business transactions, the system defaults the terms of payment key specified in the master record of the customer/vendor in question.
In some transactions (for example, credit memos), however, the system does not default the key from the master record. Despite this, you can use the key from the customer/vendor master record by entering "*" in the field.

List of materials with total PR, PO qty, and stock

Dear All,
Is there any std report to check the list of materials along with total PR qty, PO qty and Current stock.
This is to check, what is the total requirement of the materials and whether Purchase team has raised the PO or not ?
Please advise.
Regards
Vinoth.

Hi,
MD04 gives us the details of individual part no.
But, we would like to see similar details in the form of list of materials, with cumulative demand, cumulative OPEN PR Qty, Open PO Qty and Stock.
Please help.
Regards,
Vinoth.

Any option to get the list of Invoice with respect to Sales Area

Dear All,
Is there any option to check the list of Invoices with respect to the Sales area.
Because, in VF05, we are getting the list either for a Payer or a Material.
I want to see the list of Invoices for a Sales area. I mean, it should be similar to VA05, where we can get the list of Sales Orders even without providing the Customer and Material information.
Reagrds,
Mullairaja

HI
Use the T code VF05N and select the option Bill documents in Fi
Here you can get the list of invoices
Try with MC+2
regards
Prashanth
Edited by: Prashanth@SD on Nov 11, 2010 9:44 AM

Report for the list of meterials with sales text .

dear all,
can any body help me in code for list of meterials with sales text as discription.
thanks &rgds
vamsee krishna yadav

Hi Vamsee
The table for material related Sales data is MVKE.
If you want to display materials then you may write a select query on MVKE, selecting Sales Organization and Distributuion Channel.
the concatenate mat number (with the leading zeros), Sales Org and Dist Channel into what will be the 'Name'
CALL FUNCTION 'READ_TEXT'
EXPORTING
id = '0001'
language = <language>
NAME = 'Name'
object = 'MVKE'
TABLES
lines = li_lines.
Now read the li_lines table for the Sales Text.
Thanks
Pushpraj

REPORT for list of invoice with an order reason.

Hi SAP Gurus !
Is there any standard SAP report which will show me a list of invoice with an order reason field?
I have tried VF05 and VF05n,but in both of them, order reason as a selection parameter field is missing.
In case of any clarification kindly revert back to me.
Regards,
Ujjawal

Thanks to all !
Actually i was going to create a query with VBRK and VBAK tables but sales order number is not the common link as sales order number is present in VBAK table only.
Apart from that i had tried to add VBRK and VBRP table then i was getting the list of invoice with order reasons (because order reason was getting copied from an order to invoice) ,but in this query i'm getting Order reason number with list of invoice only(Description of order reason is not coming).
Please guide me for this if i'm wrong.
Regards,
Ujjawal

How to use List of values with bind variables on item?

Hi
I made a dynamic list of values with a bind variable as a provider. I tried to run the list, and it worked fine - i filled inn the bind variable when asked for, and i got a list of values to choose from.
I would very much like to use this list of values as an attribute on a custom made item. My wish is that when creating the item you someplace write the bind variable, and the list will then turn up as wanted. (I could f.ex add the variable as an attribute on the page type)
I tried to create a custom attribute and assign the list of values to it. It created an error when I then tried to add the attribute to the item.
Does anyone have any idea on how to solve this?
Any help appreciated!
Maja R. Anjer

Hi
i am getting error as
oracle.apps.fnd.framework.OAException: oracle.jbo.SQLStmtException: JBO-27122: SQL error during statement preparation. Statement: SELECT * FROM (SELECT meaning, lookup_code,lookup_type
FROM fnd_lookup_values
WHERE view_application_id = 200) QRSLT WHERE (lookup_type=:1 AND ( UPPER(MEANING) like :2 AND (MEANING like :3 OR MEANING like :4 OR MEANING like :5 OR MEANING like :6)))
Thanks
Mateti

How to find out which list is associated with specific incoming email address

Hey Guys,
I've a received a request today from a user asking me which list was setup with a specific incoming email address.
Is there a way to find out which list is associated with an email address?
Thanks

OK after a bit of research I found a way to achieve this.
I simply looked up the email address in ADUC, then did a search in SP with the display name. I could locate the list and manually confirm it was configured with the incoming email address I was looking for.
I also found the below script on Stackoverflow, but got "The 'using' keyword is not supported in this version of the language." when I tried to run it. Any idea how to fix that? I'd like to have a script to link a library to an email address istead of the
manual approach described above.
http://stackoverflow.com/questions/4974110/sharepoint-how-do-i-find-a-mail-enabled-list-if-i-only-have-the-email
$SiteCollection = ""
$EmailAddress = "" # only the part before the @
# Load SharePoint module if not done yet
if((Get-PSSnapin | Where {$_.Name -eq "Microsoft.SharePoint.PowerShell"}) -eq $null) {Add-PSSnapin Microsoft.SharePoint.PowerShell;}
cls
using System;
using Microsoft.SharePoint;
namespace FindListByEmail
class Program
{a
static void Main(string[] args)
string siteUrl = $SiteCollection;
string email = $EmailAddress;
using (SPSite site = new SPSite(siteUrl))
foreach (SPWeb web in site.AllWebs)
try
foreach (SPList list in web.Lists)
if (list.CanReceiveEmail)
if (list.EmailAlias != null && list.EmailAlias.Equals(email, StringComparison.InvariantCultureIgnoreCase))
Console.WriteLine("The email belongs to list {0} in web {1}", list.Title, web.Url);
Console.ReadLine();
return;
finally
if (web != null)
web.Dispose();

Looking for a List of GT72 with IPS screen

hi guys !
I'm looking to buy a GT72 with a 970M or 980M , but my main focus is on the screen . i really want a IPS screen with my GT 72 , and i know that there is a few which got one.
when i look on website a lot of information are missing and i'm never sure if there is actually a IPS screen or not.
My budget is like between 1.7k€ and 1.9k€ so if someone could make a list of GT72 with IPS screen in this price average it would be nice
sorry for my bad english
thanks

Hi Ann Thanks for that. I did come across that list too. There is a wiki site started also that has bugn to show how each works too. That's what I'd love to create for the entire list with a thumbnail as a visual When I have time!
http://premierepro.wikia.com/wiki/Transitions

List of issues with DM6.0

Here's my list of issues with Desktop Manager 6 that I would like to see addressed.
1) No minimize to system tray. This isn't a huge deal but I'd like to see it return.
2) Halt incoming e-mail to device when connected. This needs to come back. I don't need my Blackberry buzzing on my desk every two minutes when I'm sitting in front of my e-mail client.
3) Folder sync selection. My mail server has rules that automatically sort incoming e-mails into different folders. I'm pretty sure practically everybody in an enterprise e-mail environment does this. In previous versions of DM, there was an option to choose which folders to sync. This is now gone, although I believe because these settings end up stored on the BES server my settings have remained for now. Moving forward, I can't change any of them without talking to our BES administrator.
4) Automatic backup is broken. I've set DM to automatically backup my device "Weekly" when it is connected. What actually happens is every time I connect my blackberry it gets backed up - this can happen multiple times in one day. Pretty useless.
5) Mass storage mode settings on blackberry are bypassed. I have my bb set to prompt whether I want to enable mass storage mode when I connect it. Now, when I connect my bb it immediately enters mass storage mode without a prompt on the device or on the desktop. I have this configured because if you use any kind of custom ringtone, even if it is stored on the internal memory and not on the media card, as soon as mass storage mode is enabled the bb cannot access the files internally and ringtones default back to a standard generic one. I can no longer wander away from my desk and hear my phone ringing and identify that it is my phone.
That's my current (growing) list of issues. I will update with more, if anyone wants to confirm these issues or add others I will add to the list as well.

you need to add media administration is non existent without Roxio Media Manager. You can no longer pick and choose which files to exchange. Synching is the only option.
Also, if media files are encrypted, DM 6 cannot read them. This was dealt with in Roxio Manager by simply inputing the encryption password...

List of Problems with new Web Mail

List of Problems with NEW Web Mail :
- At first doesn't open full page message list or retain full page as default setting, have to drag down bar
- Only shows 20 message lines after “pulling down” the divider, screen partially empty until I scroll down. It should show at least 26, preferably all available
- After moving bar, bar moves back up after going back to inbox (not delete message) after reading a message, have to move it down again, and again...
- Doesn't go to next message when delete message on screen is selected, no setting option for default to do this.
- There is a drop down to select which folder to move a selected email to. The initial display shows 7 usable choices, with the usual slider and arrow to show more choices. The space on the slider clearly shows more choices are present (actually about 20 or so are there), but any attempt to use the slider or arrow to see more choices causes the drop-down to instantly disappear. I can't move the selected field with arrow keys either. I can select any of the visible 7 choices, and move an email to only one of the 7. NOTE: This one works in both IE and Firefox, but if Verizon Webmail was fully web standard (see http://en.wikipedia.org/wiki/Web_standards) compliant it would also work in my preferred browser, Mozilla Seamonkey, the direct descendant of the original Mozilla browser. Webmail should be FULLY web standard.
- Occasionally a message will move from inbox to trash, without NO indication or command to move them.
- Emails occasionally flash an error message and simply disappear - not to trash or other findable place, just disappear. No time to read the error message either.
- No way to set a whitelist for supposed spam emails, unless the whitelist for “Blocking” is the same. Very unclear.
- How can I switch my service back to the original, basic, email which works ok? I know it’s still there, since some of my other accounts still access it!!!
This seems my only way of getting this info direclty to the programming staff. If it doesn't actually do this, will SOMEONE PLEASE FORWARD THIS MESSAGE TO THEM !?!
Thanks!

vz_ric wrote:
The majority of websites are set up the same way for all browsers. It's the software manufacturers responsibility to make their software compatible with websites, not the other way around. Otherwise everyone who has a website will have to make 10 different sites to work multiple browsers.
Contrarily, it is Verizon's, as well as other companies like Verizon whose customer base uses a wide variety of web browsers, web page designers' responsibility to use only standard W3C-recognized code and not to use non-standard non-W3C-recognized code, e.g., Microsoft's Internet Explorer specific code, when designing their web pages. In my opinion based on my observations, Verizon's web page designers are too often guilty of using IE-specific code.

List of issues with patch level

Is there a list of application errors reported for each patch level?
When working with SAP R/3, there is a SAP note released for each patch level which states the changes delivered in that patch as well as what fixes are delivered. Therefore, it is easy to see what application errors exist in each patch level. Is there something similar for SAP Business One?

There are also notes for those Lists of issues with each patch level for B1. What is your B1 version and PL?
Thanks,
Gordon

List of terms with definitions

Similar Messages

Maybe you are looking for