List of transactions executed in the last one year along with the count

Hi all,
I want to find the list of transactions executed in the last one year in my IDES system. Also, i want to find how many times these transactions got executed in the last one year.
I already saw, ST03 and ST03N tcodes. But im not able to see the correct result there.
Could anyone tell me whether SM21 or ST03N tcode will be useful for finding the total number of transactions get executed in the last one year and the number of times these got executed..
If anyone of this useful for my exact requirement, then what are all the correct inputs need to be passed to these transaction?
When i see the MONI table, i find that it gets stored with some cluster key. How the data from this table will be usefiul for my requirement?
Or, is there any standard reports available for finding this count?
Thanks,
Shanthi

Hi Michael,
Thanks for ur reply.
I have few more clarifications in this.
When i click the "Standard" transaction profile, it shows a list of dialog pgms and the number of steps. But this count is different from the count which i get it from "Early Watch".
For example, the "Standard" didn't display the SE38 transaction code for a specific week which i selected. Whereas, "Early watch" displays the SE38 transaction.
So, which count is correct actually?. What do "standard" and "Early watch" represent?
Also, i executed a Z transaction today(13.03.2009). But im not able to select today (No application server is avaliable to select for today's date). So how can i check what are all the transactions executed today and how many times this Z transaction executed today, from this transaction.
Please help me...
Thanks,
Shanthi

Similar Messages

I am using iPhone 4 from the last one year and went dead and got it replaced by paying Rs.12500/- to Nyasa Sion Koliwada Mumbai Service Provider but now again after 38days the problem has started, what do i do? Is this is the quality & service we boost?

I am using iPhone 4 from the last one year and went dead and got it replaced by paying Rs.12500/- to Nyasa Sion Koliwada Mumbai Service Provider but now again after 38days the problem has started, what do i do? Is this is the quality & service we boost? On visiting the store we get only one reply you may write to Apple directely. we have the similar kind of problem with iPad which is being used by my wife Mr.Neelam Vij and paid Rs.16000/- to get it replaced within a year & 6months use. so in totality we have paid Rs.28500/- + Rs. 3000/- diagnostic charges.
1. iPhone 4 , 32 GB Black with Sr. No. 88******A4T
2. iPad 2, 16GB White with Sr. No.DL*******KPH
Moreover, we have no information to contact whom. even the replace set has a warranty of only three month which further confirm that Apple itself is not confident wheather product will last after replacement for more then three month. Such kind of happening do not encourage anyone to recomend this product to anyone. Would appriciate a faster response to our problem if someone from Apple is going to read this email.
Thanks & Regards
A K Vij
<Personal Information Edited by Host>

http://support.apple.com/kb/he57?viewlocale=de_de
India
(91) 1800 4250 744
www.apple.com/in/support/
hope it helps

How to Identify incoming and outgoing IDOC in the system for last one year.

Dear All,
How to Identify incoming and outgoing IDOC in the system for last one year.
Regards
Ashok

Dear Anindya,
I used WE05 the result by giving direction outbound.Then on created field i put the value date.I m getting the output in the no of idoc number.
This is only the way to identify?
Thnx
Ashok
Edited by: ashok singh on Oct 22, 2009 8:40 AM

How to find the objects created in last one year

Hi Experts,
How to find the objects created in last one year.
Thanks in Advance,
Iff

hi
just go through this table.
<b>TADIR</b> object as 'PROG'
in this you can also provide the authors name in AUTHOR field
and
<b>TRDIRT</b>
reward points if it helps,
regards,

To display the WBS elements for last one year

Hi All,
Im displaying the details of all active employees. I need to display the WBS elements of all active employees for the last one year alone. Can anybody help me out to get this...
Regards,
Surya

Hi,
select all the PERNRs with
BEGDA and ENDA as per ur req
to check if they are active or not
use the FM
HR_BEN_US_CHK_TERMINATION
then take all the active PERNRs and use
them to query PRPS table with
OBJNR = activePERNR

Find aging of concurrent jobs execution for last one year in R12

DB:11.2.0.3.0
EBS: 12.1.3
O/S: Red Hat Linux
Hi all,
Could anyone please share the resolution for the below question in R12 ?
1) Considering only 3 weeks of data is maintained in FND tables, which means we cannot use fnd_concurrent_requests to get list of jobs submitted in last one year. Is there any other way what we can get to find out aging of jobs execution for last one year?
Thanks for your time!
Regards,

Locking this thread - Pl continue the discussion in your original post - Identifying customizations in R12
Unless you have backups of the deleted data, this is not possible

Last one year data

I have a date field (upd_date) in my table (table1) and i need to retrieve the count of the records which contains the last one years's data alone.. Using the upd_date field as reference.
Thanks...

user10871298 wrote:
I have a date field (upd_date) in my table (table1) and i need to retrieve the count of the records which contains the last one years's data alone.. Using the upd_date field as reference.
Thanks...So whats the problem in that?
You can just
select count(*)
from table1
where upd_date between to_date('01-01-2009','dd-mm-rrrr') and to_date('31-12-2009','dd-mm-rrrr')Or if you dont want to make the date static you can
select count(*)
from table1
where upd_date between add_months(trunc(sysdate,'year'),-12) and trunc(sysdate,'year')-1Edited by: Karthick_Arp on Mar 22, 2010 10:57 PM

I lost some of my contacts which was updated during last one year

i lost some of my contacts which was updated during last one year when reset the Iphone 4s it took the data from december 2012

No I have not checked to see if the netbook is still authorized. Where do I go to do that? In the Account info? If so, you cannot view which computers are authorized. And I'm sure it is, I usually don't mess with that part of it. It was just weird that I connected it to my Mac, and then after disconnecting it, a few of the apps just disappeared. And as I mentioned before, the "apps" portion in iTunes when I connect the Touch to the netbook is grayed out and I cannot even back up the apps from it to iTunes. When I clicked on Sync apps, it asked me if I was sure and says "are you sure you want to sync this ipod to this music library, all application will be replaced with the apps in this music library"
I found that odd because my iPhone does that, the iPod Touch should not. (I've owned an older model Touch, which it did not do this) It should allow me to backup all apps from it to iTunes.
That's the one thing I hate about the iPod Touches and iPhones being connected to iTunes. You constantly have to "sync" to backup, I like to manually do that on my own app by app.

I have a cracked iPhone 6 screen. I just bought the phone, but not AppleCare. If I get my iphone screen replaced through apple how much do I pay and would it void my one year warranty with Apple?

I have a cracked iPhone 6 screen. I just bought the phone, but not AppleCare. If I get my iphone screen replaced through apple how much do I pay and would it void my one year warranty with Apple?

To replace your phone's screen costs $109US and I don't see why having Apple replace the screen would void your warranty.
http://www.apple.com/support/iphone/repair/screen-damage/

I am now using the free 1 month CC trial. I got a free one year licence with a camera. I have a product key 24 characters long with numbers and letters. I can't find anywhere to put this key to activate the account? Using a PC, windows 8.

I am now using the free 1 month CC trial. I got a free one year licence with a camera. I have a product key 24 characters long with numbers and letters. I can't find anywhere to put this key to activate the account? Using a PC, windows 8.

Redemption Code Help
Mylenium

How to find vendor who does not have transactions for last one year

HI all,
We have around 20000 vendors, i want to find out who does not have any transactions for last 1 year. Any valuable suggestions on this?
Thanks and regards
Ramarao

HI,
Actually above one mehtod is very painful method. Is there any method by writing ABAP query and any other short cut method
Thanks and regards
Ram

List of Transactions executed on a particular day.

Hello Friends,
Can somebody give some inputs for the following query.
I want to retrieve the list of transactions run on a particular day.
ANy help in this regard is highly appreciated.
Best Regards,
Sasi.

Hi Madhu,
I tried this TCode, but it didn't give me the req. info.
I'm looking for some report or table, which would give this information since I need to use this in my report.
Best Regards & Greetings,
Sasi.

SQ01 - SAP List Viewer - Ability to get the count of the output records

Hello All,
I have a problem with the SAP List Viewer output for an SAP Query.
I have created a SAP query (SQ01) for a table. Its a basic query that queries on just one table (VTBFHA)
When I run the query, for the output in the SAP List Viewer (ALV) format, Could anyone kindly help me figure out how to get the count of the number of records displayed in the output?
For Eg: when we run the T code SE16, It gives us the number of records displayed in the output.
Similarly, does anyone know if there is a way I could display the count of the number of records displayed in the output of the SQ01 query?
I have tried checking the "Counter" in the basic list tab, but it does not give me the count.
Any help will be greatly appreciated
Thanks
Subhani

Yes there is a solution. Follow these steps
Select your query
Hit the button InfoSet Query
Go to Edit->Settings->
Check the box "Count in the Output list" in the Output tab
Hit Save
In pop up box select the user group
hit enter
Hit the back arrow (F3)
now Execute the query
You should be able to see the count in the output.
The count will appear on the right most column of the output. If it does not go to the "Change layout" option and make sure it is part of the "Displayed columns list".
Regards

How export one table along with data from one location to other location

Hi All,
I'm new in export/import practice.
Can anyone plz tell the steps along with commands to do the following:
1. I want to export a table with data from one location(computer) to other(computer) that are in same network.
2.Also from one user to another user.
I'm using oracle 10g.
regards
Sonia
Edited by: 983040 on Feb 19, 2013 11:35 PM

First of all read documentation
Oracle Export/Import : http://docs.oracle.com/cd/B19306_01/server.102/b14215/exp_imp.htm
Datapump Export/Import : http://docs.oracle.com/cd/B19306_01/server.102/b14215/dp_overview.htm
If you are using Datapump or Traditional Export/import you need to follow following steps
*1) Take User dump via EXPDP on Computer A .*
For EXP
exp username/password owner=Test file=D:\test.dmp log=D:\test.log
For EXPDP
expdp username/password schemas=TEST directory=TEST_DIR dumpfile=TEST.dmp logfile=TEST.log*2) Copy that to Computer B*
*3) Import dumpfile.*
For IMPDP Use remap_schema optionhttp://www.acehints.com/2012/05/data-pump-impdp-remapschema-parameter.html
For IMP use fromuser and touser option
one user to another user imp

How export one table along with daya from one location to other location

Hi All,
I'm new in export/import practice.
Can anyone plz tell the steps along with commands to do the following:
1. I want to export a table with data from one location(computer) to other(computer) that are in same network.
2.Also from one user to another user.
I'm using oracle 10g.
regards
Sonia

Wrong forum. This is a database query not an Oracle Secure Backup issue.
Thanks
Rich

List of transactions executed in the last one year along with the count

Similar Messages

Maybe you are looking for