List of unnassigned objects in the integration directory
Hi! Hope this is an easy question. Does anyone know of a way to get a list of all objects - party, service, rec det etc... - that are not assigned to a Config Scenario in the integration directory. Need to do a cleanup and wants to avoid going object by object to get the list. Thx, Duncan
Thanks for the replies. The objects tab shows me all objects. I need to see only those not assigned to a CS. How can I do that there?
The where used option requires me to go trhough every object (1000+) and check one by one. That is what I am trying to avoid.
Ideas? Thx, Duncan
Similar Messages
-
Error while importing the Integration Directory Objects
Hi,
I created one simple RFC to RFC scenario.We have only one XI system. after creation of this scenario I exported the Scenario from Integration Directory. Then I deleted the configuration scenario from Integration directory. Now I tried to import the TPZ file which was generated before the deletion of the objects in the integration directory. I get following error :
"No business system found on the application server (XXXXXXX, 00) for client 001"
XXXXXXX is our XI server.
Now if I create the Business system for client 001 in SLD for XI system and tried to import the TPZ file again, it works.
What could be the reason for this? Also Please let me know if I have to do any configuration before importing the TPZ file in same the same system to avoid the above error.
Highly Appreciate your valuable inputs.
Thanks,
ChandravadanHi Swarup,
Thanks for reply.
As you suggested, I did the SLD cache refresh and also whole cache refresh. But Still I get the above error. and if I create the business system for 001 client of XI system then it works.
My doubt is why I get error only for 001 client. There are also clients in XI system. and I have business system for client 600 of XI system as Integration server.
Thanks,
Chandravadan -
Unable to Load the Integration scenario into the Integration directory
Hi All,
I am new to using SAP XI.
Require your help on the following issue.
I have built an Integration scenario, added Component Type: Product Version, inserted actions and connections.
I did check for any errors. I found no errors.
When I am trying to load this scenario into the Integration directory its not showing up the scenario in the popup.
Navigation:
Directory > tools> Transfer scenario from repository
The status of Integration Scenario in the builder shows as
"Being processed".
I created the scenario 2 days back.
Can some one help me in this?
Regards,
MeherHi All,
Thanks to all who helped me.
michal,divija : Can you please let me know in details how to activate Business Scenario?
I did not create any business process.
Sridhar: I did releases some locks on my process, no luck.
Can you please explain me in more details?
Should I have a process build for my Integration scenario to be activated?
Thanks,
Meher -
No service for system X client Y in the integration directory
Hi guys and gurus,
I've struggling with the following case for a couple of months (!!) and still I can not make it. I have to say that I am coming from the MM modules but trying to set up a ICH demo by myself during my spare time.
I send an idoc from R/3 to XI using program RSMIPROACT and I get message <b>No service for system SAPR3I, client 800 in Integration directory</b>. Even though, idoc has status 03 (Outbox).
- I have created a technical and business system.
- Connections work properly in SM59
- Port XIDOCPORT with RFC XIDCLNT100 maintained txn WE21
- Partner XIDCLNT100 (LS) with Outbound parameter:
Idoc name - Port created. txn WE20.
- IDX1 maintained in XI system.
Is there something missing?
This is my first post but points rewarded if somebody takes me out of this hole.
Thanks,
Ivan.
key words: ICH, Note 940313 IDoc adapter: Error messages in SM58, <a href="https://service.sap.com/sap/support/notes/940313">Idoc Adapter : Error Messages in SM58</a>, No service for system SAPABC client 123 in the integration directory,Hi ,
Create a technical system and bussienss system of type WEB AS ABAP and use this bussiness system for source system in XI and try it.
Thanks & Regards,
Sekhar -
List of all objects in the data dictionary
How to capture the list of all objects in the data dictionary named like PSDFDI and verify they are granted to the FDIREADR role
See the database security guide http://docs.oracle.com/cd/B28359_01/network.111/b28531/authorization.htm#BABFHBFH
Finding Information About User Privileges and Roles
This section discusses the system views that have the grant information.
The tricky part of this is that because roles can be granted to other roles the data is hierarchical.
So start with the grants made to the FDIREADR role. So referring to the doc above;
select * from role_role_privs where role = 'FDIREADR'will list the roles granted to your role.
You will want to look at ROLE_ROLE_PRIVS, ROLE_TAB_PRIVS and ROLE_SYS_PRIVS.
I suggest you walk thru the views manually to see how the information is related. Then write a test script that queries the views for you. -
To find the list of Inactive objects in the Production system.
Hi Experts,
Need a help. I want to find the List of inactive objects in the Production system. Do we have any standard program or any transcation code to find.
Appreciate your help.
Thanks,
Venkata.ACheck below threads -
Check Inactive Objects in System
Need program to find the inactive objects
Tcode for finding out the inactive BI Objects -
Party in the Integration Directory
Hi,
Why do we need to create a party in the Integration Directory? What is the use of it.
Also, the SAP help asks us to create Business service without a party while BPM. Why?
PriyaHi,
I would recommend you to read this link:
http://help.sap.com/saphelp_nw04/helpdata/en/87/1d6e3fefa13042e10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/e3/4f2c41c684de2be10000000a1550b0/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/da/7a2f41b239a831e10000000a1550b0/content.htm
Regards
Suraj
Message was edited by:
S.R.Suraj -
Error in the Integration Directory
Hi All,
In ID When I Go for Environment-->>Cache Notifications
I Got the Following Error
<b>Unable to determine the name of the central Adapter Engine from the System Landscape Directory at this time. Notifications to the central Adapter Engine are therefore listed using the technical name of the Adapter Engine. This is usually structured as follows: af.<SAP System ID>.<Name of application server></b>
Please Resolve this Issue
Regards
KhannaHi Navadeep,
I Checked With All PI* Users, None of them are Locked.
In The Runtime Workbench Component Monitoring-->> All Components AE, SLD,IR , ID, RTW, Are in the Green State Only.
Here If I Clicked on the <b>Cache Connectivity Test</b> Means It's Giving Error.
<b>Attempt to fetch cache data from Integration Directory failed; cache could not be updated
[Fetch Data]: Unable to find an associated SLD element (source element: SAP_XIIntegrationServer, [CreationClassName, SAP_XIIntegrationServer, string, Name, is.01.epnwsrv, string], target element type: SAP_BusinessSystem)</b>
Please let me Know
Regards
Khanna -
NO Interface Mapping found in the Integration Directory (Configuration)
Hi,
I've got following problem with PI 7.0::
I have a Mapping Scenario designed in the IR. It works - using test function - there. If I go to the COnfiguration Tool during creating of the Interface Determination it doesn't find the Interface Mapping. The Sender resp. Receiver Interfaces are correct assigned to the Business Systems.
- Sender Business System is a FTP Server, which contains the needed Sender Interface.
- Receiver Business System is a SAP R3 System containing the RFC Receiver Interface.
I had to change the Related Integration Server of the SAP Business System in the SLD. How can I be shure, that my PI System is syncronous with the SLD? How can i get the newest changes - BS, TS or SC - from the SLD updated to my PI?
Thx in advance
MichaelHi,
You must make sure that you have correctly identified the interfaces in your interface mapping.
1. Message Interfaces are correctly configured
2. Outbound/Inbound Interfaces are correctly declared in Interface Mapping
Otherwise, your interface mapping would not be found in the interface determination in Integration Directory. -
Role based authorisations in the Integration Directory
We have built a new PI landscape (Pi 7.11) and worked with our security teams to perfect the various roles. I am now attempting to implement role based authorisations in the ESR & ID so that objects in our QAS and PRD environments can be configured but not deleted or created.I have implemented role based authorsations as per the SAP standard process performing the following actions
Exchange profile com.sap.aii.ib.util.server.auth.activation was set to true and the Java Stack Restarted.
I created a role in the ID that allowed editing of any object.
I assigned the role to my userid in NWA useradmin
I am unable to edit ANY object in the ID
When I set the Exchange profile parameter to false I found I was able to edit any object in the ID.
So its obvious that the Exchange Profile Parameter does make a difference. However, it doesn't appear as if the role I created is being referenced, even though I assigned it to my account in NWA user admin. I looks like I may be missing some exchange profile parameters. I have the following exchange profiles set:
IntegrationBuilder.IntegrationBuilder.Repository com.sap.aii.util.server.auth.activation (string) = true
IntegrationBuilder.IntegrationBuilder.Repository com.sap.aii.ib.server.acl.enable (boolean) true
IntegrationBuilder.IntegrationBuilder.Directory com.sap.aii.util.server.auth.activation (string) = true
IntegrationBuilder.IntegrationBuilder.Directory com.sap.aii.ib.server.acl.enable (boolean) true
Any advice you can offer would be appreciatedResolved this issue.
The documentation is confusing but finally found the answer by referring to the SAP XI 3.0 documentation. -
Not gettting the list of interfaces for BPM in integration directory
Hi Gurus,
I am trying to create receiver detrmination and interface determination for my BPM. When I select my BPM as communication component, I am not getting the list of abstract interfaces under outboutnd and inbound interfaces category.
What might be th reason? I have tried by re importing the BPM in directory. But no use.
Regards,
ReyazLet's say your scenario is :
Sender --> BPM --> Receiver.
Double click on your sender business system and go to Other Attributs tab. Check if the Software Component in which you created your objects, is present there or not. If not then go to SLD and and add the Software Component Version to your Business System.
And then in ID from menu Environment --> Clear SLD Data Cache and then you can try it again. -
List of GL required in the integration of FI With SD & MM
Hi,
I need a list of all the GL required for integration of FI with SD & MM.
Please help me with the same.
Regards,
SAHU.Hi,
As per client requirment we maintain GL account. I can give you few example.
For SD: Sales revenue,Discount allowed
For MM: Inventory a/c, raw material consumption a/c, GR/IR account
Regards,
Sreekanth -
A list of global objects of the function group "bbp_bid_inv"
Hi everyone,
Somebody have a list of all (or some) global objects ( i mean : internal tables, structures, transparent tables, ...etc) of the function group "bbp_bid_inv" ?
Thanks & regardsfind out in se 80
cheers! -
How to get the list of instanciated object in the JVM ?
Hi,
Is there a way to build a HashMap containing:
key: class name
value: array of Objects references containing all instance of this class name
Thank's
JohnWith others words, this questions were here to investigate if there is a tricky way to write a pure java code to that can identify and references objects living in the heap (debugging and performance purpose).
Yeap, somewhere this question is not interesting as there is no pointers in java, so no way to read a single bit in the heap.
I were just hopping that somewhere there is a way to enumerate the object living in the heap, either through a hashmap containing the reference of these object and managed by an obscur java.lang class or a kind of class that will load "manually" any application to troubleshoot (much more realistic as such hashmap should exist and by managed by the jvm only).
Now, using jni, is it possible to access in a very simple way this "jvm hashmap" ? -
Problem restricting Integration Directory object access
Hi All,
We are trying to restrict access to a group of objects in the Integration directory. In the tab "Party" i select the option as follows:
Selection Paths -
Operator - Include, Party - Service without party, Service - BSR_TEST
Objects -
Operator - Include , Type = *, Action - Change
However, this role when assigned to the user allows create and delete option as well. Also, if any other role is assigned to the user and then revoked, the restriction does not work (the role mentioned above gives an Insufficient authorization error even for the objects it is set to permit)
Our XI system version is 7.0 with SP level 17.
Thanks in advance for your inputs
VijayaHi Abhishek,
Thanks again for your response. However any ideas as to why the role would stop working f user settings are changed?
Also, when i select the service using option - single selection and select multiple checkboxes (even 2) it does not work, where as if i add 2 rows with one value it is ok.
Let me know if i am missing something
Thanks
Vijaya
Maybe you are looking for
-
When trying to print to PDF from a sales program we use it keeps throwing errors
When several people try to print to PDF from MAS90, it will save it and create a file as it normally does. However, it does not open in Acrobat 9 Pro as it normally does, and displays the famous error "Acrobat could not open 'xxxx.pdf' because it is
-
When I try to watch videos the screen says "Blocked Plug In"
When I try to watch vides the screen says "Blocked Plug In". How do I fix this?
-
TS3899 Problem getting emails with Iphone 6
Hi, I used i phone 3 before and I used 3 email accounts before. I bought a i phone 6 3 days ago. I set up all 3 email accounts, but 2 of them cannot get emails. Only one account is getting email.s The other two accounts are hotmail and my university
-
Error while using Jdeveloper to find WS on Registry
Hi guys, I installed Oracle Service Registry with discovery/publication setting not standalone. In Jdeveloper I can make a connection to Registry and it works fine. and also I can look up the WS that I published before. but problem comes out from thi
-
Disable Menubar in bottom of the canvas
Hello, When i run my midlet, a grey menu bar appears in bottom of my canvas. This is the bar where commands names (OK, Back, exit,...) appears. I examined some pro softwares. There aren't menubars on the screen. So, I would be happy if anybody kindly