List of useful MM Std Report T code : Especially CIN

Hello Experts !!
Can anyone give me the link/reference of useful MM Std Report T code Especially , Especially CIN
Rgds
Anis

Dear Anis,
Customizing
          J1I0 - CIN Health Check
Indirect Taxes
          Master Data
                    J1ID - Excise Rate Maintenance
                    Deemed Export License
                              J1ILIC01 u2013 Capture
                              J1ILIC02 u2013 Change
                              J1ILIC03 u2013 Display
                              J1ILIC04 u2013 Cancel
                              J1ILIC05 - Close
                    Excise Bond
                              J1IBN01 u2013 Create
                              J1IBN02 u2013 Change
                              J1IBN03 u2013 Display
                              J1IBN04 u2013 Cancel
                              J1IBN05 - Close
          Procurement
                    Excise Invoice
                              Incoming Excise Invoice
                                        Central Processing
J1IEX - Capture / Change / Cancel / Display / Post
                                        Individual Processing
                                                  J1IEX_C - Capture / Display
J1IEX_P - Change / Display / Post / Cancel
                              For Depot
                                        J1IG - Create/ Change/ Display
                                        J1IGA - A-Certificate entry at depot
                                        J1IGAD - Display of A-Certificates at depot
                              Reports
                                        J2I8 - Balance credit for capital goods
                                        J1IGR - List of GRu2019s without Excise Invoice
                    Subcontracting
                              Subcontracting Challans
                                        J1IF01 u2013 Create
                                        J1IF11 u2013 Change
                                        J1IF12 u2013 Display
                                        J1IFQ - Reconcile Quantity
                                        J1IF13 - Complete/ Reverse/ Recredit
                              Reports
                                        J1IFR - Challan Listing
          Sales/Outbound Movements
                    Excise Invoice
                              For Sales Order
J1IIN - Outgoing Excise invoice create/change/display
                                        J1IP - Print
                              For Depot
                                        J1IJ - Create/ Change / Display
J1IDEPOTSTOCK1 - Depot stock with balances
                              For Other Movements
                                        J1IS - Excise invoice for other movements
                                        J1IV - Post and Print
                    J2IUN - Fortnightly Payment
                    J2I9 - New Monthly Returns Report Rule 57AE
                    J1IIEXCP - Sales excise invoice exceptions
                    Exports Under Excise Regulations
                              Exports
                                        Central Processing
J1IA101 - Create/Change/Post/Update/Cancel/Display/Reverse ARE-1
                                        Individual Processing
J1IA102 - Create/Change/Post/Cancel/Display ARE-1
J1IA103 - Update/Display ARE-1
J1IA104 - Reverse/Display ARE-1
                                                                                Deemed Exports
                                        Central Processing
J1IA301 - Create/Change/Post/Update/Cancel/Display/Reverse ARE-3
                                        Individual Processing
J1IA302 - Create/Change/Post/Cancel/Display ARE-3
J1IA303 - Update/Display ARE-3
J1IA304 - Reverse/Display ARE-3
                              Reports
                                        J1IANX18 - Pro Forma of Running Bond Account
J1IANX19 - Statement Regarding Export of Excisable Goods
                                        J1IARE_AGE - Ageing Analysis for ARE Documents
                                        J1IBONSUM - Bond Summary Report
                                        J1ILICSUM - Deemed Export License Summary
Excise JV
          J1IH - Create
Forms Tracking
          J1IUN - Forms tracking
          Registers
                    Excise Tax
                              J2I9 - Cenvat Register
                              J1I5 - Update RG23A/C Issues and RG1
                              J2I5 u2013 Extract
                              J2I6 - Print Utility program
                    Sales Tax
                              J1I2 - Sales Tax Register
Tax Deduction at Source
          Classic
                    J1INC u2013 Post
                    J1I8 - Challan Update
                    Certificate
                              J1ICREP u2013 Reprint
                              J1ICCAN u2013 Cancel
                              Print
                                        J1ICCERT - Regular Vendors
                                        J1ICOTV - One-time Vendors
                    Quarterly Return
                              J1INQEFILE - Quarterly Returns - All IT sections
                    Utilities
                              J1IHBK - Copy House Bank ID
Extended Witholding Tax
          Provision
                    J1INPR u2013 Post
                    J1INUT u2013 Utilize
          Vendor Challan
                    J1INCHLN u2013 Post
                    J1INREV u2013 Reverse
                    J1INBANK - Update Bank Challan Number
          Vendor Certificate
                    J1INCERT u2013 Print
                    J1INREP u2013 Reprint
                    J1INCANC - Cancel
          Adjust
                    J1INJV - Post Vendor JV
          Customer Tax
                    J1INCUST - Clear
          Customer Challan
                    J1INCHLC u2013 Post
                    J1INREV u2013 Reverse
                    J1INBANK - Update Bank Challan Number
          Customer Certificate
                    J1INCC - Print
          Quarterly Returns
                    J1INQEFILE - Quarterly Return
Asset Accounting
          J1IQ - Year-End Income Tax Depreciation Report
this may help u
Regards,
Pardeep malik

Similar Messages

What need to be done to use the cashflow report(T-code:S_ALR_87012271)?

Hi All,
Does anyone know what need to be done in order to use the cashflow report(T-code:S_ALR_87012271)?
Any specific configuration, modules and functions need to be turned on to use it?
Thanks,
CW

Hi,
You have to configure CFS in financial statement version(OB58).
Please refer some of the existing settings for CFS and you will have some idea
Regards
A

Std report T.Code to view the Employees those are assigned to the Project

Dear Guru's,
We are assigning Employeeu2019s in u201CActivityu201D u201CPersonal assignment Tabu201D, for these employees we are booking the u201CTime sheetu201D against u201CNetwork activityu201D.
Are there is any standard report is available to view the Employees those are assigned to the Project. If it is available please provide the Transaction Code.
Regards,
Bhanu Prathap

Hi
Nitin is correct if there is no HR then it is difficult to set up resource planning based on workforce. Nitin is also correct in poinitng out that yu do not have to implement HR fully, just set up the personeel master data (HR Mini Master) with a basic set of data infotypes.
If however you do not plan to set up HR ot the personnel master then you need to do creative thinking - e.g. set up all your people as individual work centres and assign to activites - the work centre description can be the name of the person and the workcentre number can be the employee number - restrcitcions is the field length, etc - however the down side of all this is that standard reports with personnel number number will not suffice and you will have to do some work for your reporting - not major as the data is stored in SAP tables

List the used ABAP objects

Hi all,
I'm looking for a standard tool to list the used ABAP objects (Reports, Include, Function Group, CLASSes) in a time
frame of one year or at least since the start-up.
My goal is the identification of the obsolete custom developments to dismiss it.
I have found the transaction SCOV but the goal of this transaction is the estimation of the code
coverage during the test.
Anyone can help me?
Thanks in advantage

This kind of data is stored in table MONI - Monitor table MONI (summarized cluster table!) and in some files of the application server (in the OS behind SAP)
- Transaction STAT or ST03n use data stored in these tables
- Some FM like [SAPWL_SERVLIST_GET_LIST|https://www.sdn.sap.com/irj/scn/advancedsearch?cat=sdn_all&query=sapwl_servlist_get_list&adv=false&sortby=cm_rnd_rankvalue] and [SAPWL_WORKLOAD_GET_STATISTIC|https://www.sdn.sap.com/irj/scn/advancedsearch?query=sapwl_workload_get_statistic&cat=sdn_all] may be used to get the data from each application server
(click on the links to get more information and samples on how to use these FM)
Regards

About "using namespace std" and tool.h++

Hi,
I am a new starter working on some old code C++ using tools.h++ which was previous compiled under the 4.2 version. After reading early topics in this forum, I know that I can use in the new workshop 6 compiler by compiler options like "-library=rwtools7, iostream" to enable usage of both standard iostreams and classic iostreams, however I have problem with "using namespace std", which is plenty in original codes, even the following simple code won't pass: CC -library=rwtools7,iostream test1.cc
File: test1.cc
using namespace std;
#include <rw/rwstring.h>
#include <iostream>
#include <string>
int main()
RWCString s1("hello");
string s2("world");
cout<<s1<<s2<<endl;
return 0;
error code is :
Error :the name cout is ambiguous, cout and std::cout
Error: The operation "ostream << std::basic_string<char, std::char_traits<char>, std::allocator<char>>" is illegal
but if I marked "using namespace std" and replace cout with std::cout, everything works fine.
Thanks for the time.
PS: when I use -library=rwtools7_std, a CC warning of illegal option -library=rwtools7_std ignored, am I missing something in the system?

The C++ Standard Library, which you access by using headers such as <iostream> and <string>, does not mix well with classic iostreams.
One problem is that classic iostreams has identifiers that are the same as identifiers in standard iostreams, but in different namespaces. If you add
using namespace std;
to your code, you create conflicts among the names.
In general, "using namespace std;" is a Bad Idea in real applications. The standard library has so many names that you are likely to run into conflicts with names declared elsewhere. You can add individual using-declarations for types that you need, or qualify them explicitly.
#include <string>
#include <list>
using std::string;
std::list<string> ListOfString;
When mixing classic iostreams with the standard library, you cannot have any using-declaration or using-definition associated with names from either iostream library -- the names will conflict.
If you want to use the standard library with Tools.h++, we recommend not using classic iostreams at all. Use the option
-library=rwtools7_std
to get a version of Tools.h++ that works with the standard library.
Most simple iostream code works with both classic and standard iostreams, so this technique is worth a try. With luck, either you won't have to modify your source code at all, or the needed changes will be simple.
You mention you are using the "new WorkShop 6" compiler. Workshop 6 is over 5 years old, and was long ago declared End Of Life. No support is available for it. Maybe you mean WorkShop 6 update 2, which was released in 2001, and which has just been declared End Of Life. WS6u2 is the earliest version that supports the -library=rwtools7_std option.
In any case, you should look into upating to a current compiler.
http://www.sun.com/software/products/studio/index.xml
The current release is Sun Studio 10, listed here. But Sun Studio 11 will be released in two weeks. Watch that space (and this forum) for an announcement.
The C++ MIgration Guide that comes with the compiler explains every issue you can run into when porting code from C++ 4.2 to C++ 5.x in standard mode. It also shows you how to modify code when necessary to get the proper result.

Hard code accounts using the dynamic report templates?

Anyone ever been able to hard code accounts using the dynamic report templates?
How about getting the Property name/value fields to work?

Hi,
No, this is not possible.
In Dynamic Report templates (which are not based on EVDRE function in version 7 and below), the only thing you can do is to not use any expansion at all and to list your specific accounts on the layout itself. Or to expand your accounts based on a dimension property.
In version 7.5, all Dynamic Templates for Report and Input Schedules will use EVDRE function.
Hope this helps.
Kind Regards,
Patrick

How many lines we can print using Non-alv report list ?

Hi Experts,
How many lines we can print using Non-alv report list ?
regards
vishnu

Hi,
It depends on the page size according to the page size we can set the no. of lines as follows,
REPORT program_name NO STANDARD PAGE HEADING
LINE-SIZE 290
LINE-COUNT 65.
Hope it helps you,
Regards,
Abhijit G. Borkar

How to get list of custom objects used in abap report program?

Hi friends,
I have a requirement in which I have to scan the entire abap report and retrieve list of custom objects used in it for example custom tables, data elements, structures, table types etc,. Is there any provision in SAP like fuction modules to do this functionality? As of now I am coding everything manually where so many possibilities are there for all kinds of objects. Provide your answers and suggestions...
Thanks,
Nastera

Hi,
The best way to do this is environment analysis. Follow the steps:
1. Open se38, type in the program name (don't click on on display/change or create button, stay on first screen only)
2. Click on environment analysis button (hot key SHIFT+F4)
3. It will throw a pop-up, which will ask for type of object you want to see, which are linked /used by this program. select all (or may be if you are only interested in Tables, then select table only)
4. Hit 'Enter'
You will get the full list of all objects used in this report program. Just note down the one which starts with Z or Y and that's it.
Cheers,
Anid

List of SQL tables and attributes used in SSRS reports

Hi,
I have around 450-500 reports deployed in SSRS reporting server.
All these reports are built on SQL from multiple databases, and these databases are having unnecessary tables and attributes.
My requirement is to clean the unused tables and attributes from the databases. For this, I need the list of SQL tables and attributes used in these 450-500 SSRS reports.
Is there any way to get this data?
Regards,
RK

Hi RK,
According to your description, you want to get a list of the tables and attributes used in all reports.
In your scenario, you can query the ReportServer.dbo.Catalog table to get Report name, data source name, dataset name, and query used in the dataset with query below:
WITH XMLNAMESPACES ( DEFAULT 'http://schemas.microsoft.com/sqlserver/reporting/2010/01/reportdefinition', 'http://schemas.microsoft.com/SQLServer/reporting/reportdesigner' AS rd )
SELECT ReportName = name
,DataSetName = x.value('(@Name)[1]', 'VARCHAR(250)')
,DataSourceName = x.value('(Query/DataSourceName)[1]','VARCHAR(250)')
,CommandText = x.value('(Query/CommandText)[1]','VARCHAR(250)')
,Fields = df.value('(@Name)[1]','VARCHAR(250)')
,DataField = df.value('(DataField)[1]','VARCHAR(250)')
,DataType = df.value('(rd:TypeName)[1]','VARCHAR(250)')
--,ConnectionString = x.value('(ConnectionProperties/ConnectString)[1]','VARCHAR(250)')
FROM ( SELECT C.Name,CONVERT(XML,CONVERT(VARBINARY(MAX),C.Content)) AS reportXML
FROM ReportServer.dbo.Catalog C
WHERE C.Content is not null
AND C.Type = 2
) a
CROSS APPLY reportXML.nodes('/Report/DataSets/DataSet') r ( x )
CROSS APPLY x.nodes('Fields/Field') f(df)
ORDER BY name
For more information, please refer to this similar thread:
Extract metadata from report server database
If you have any question, please feel free to ask.
Best regards,
Qiuyun Yu
Qiuyun Yu
TechNet Community Support

Need help to Modify the STD report which uses the Tcode CATS_DA.

Hi ,
we have a requirement as below. we need Add two Additional Fileds in the OutPut of the Std Report ( Tcode CATS_DA) .( 2 fileds are one is Managername /Manager employee number ) ..
Can you Please where we need to Modify the code to meet the above requirement.
Thanks in Advance.
Edited by: sandeep on Jul 29, 2008 12:45 PM

Copy the report to "Z" version and plug in fields .
Thanks,
Saquib

SQ01 help for listing not used problem codegroup and code in notifications

Hi ,
I am making a query through SQ01 to find out how many damage codes created for a particular notification type are not being used .
In infoset I used QMEL which lists problem code group and problem code and as a bonus we also get codegroup text . When I test this query , I get damage code group and code used in all the notifications . I want solution for the following
1)How to list only distinct damage codegroup and damage code (Not per notification wise)
2)Which second table I have to use to get problem code short text
3)Which table I have to add in infoset and how join has to be created so that I get list of Damage codegroups and codes not used in notification .
NPB

Hi Pete ,
1)How to list only distinct damage codegroup and damage code (Not per notification wise)
        I have output like
                  problem code group     Problem code grp text        Problem code    Problem code text
                  MRTR                           Transformer problems        1                        I need table here
                  MRTR                            Transformer Problem           1
                  MRTR                            Transformer problem         2
I need distinct output like
problem code group     Problem code grp text        Problem code    Problem code text
                  MRTR                           Transformer problems        1                        I need table here
                  MRTR                            Transformer problem         2
2)Which second table I have to use to get problem code short text
                I need problem code table
3)Which problem code group and code not used
            Suppose for notification type X I have configured damage catalog Q and Q has MRTR , MRAM , MRGT as code groups and each of them have their own codes (say 1 to 5)...If notifications are created only for MRTR and code 1 , 5
I need not used output like
MRTR 2
MRTR 3
MRTR 4
MRAM *
MRCT *
How can I achieve this using sq01,02 etc
NPB
Edited by: Narasimha Bhat on Feb 1, 2011 4:54 PM

JRC degraded performance, large reports using exportPDF of JRC sample code

All,
I am using JRC, Weblogic, and Oracle in order to dynamically create reports using Crystal. The problem I am seeing is that for very large reports (e.g. 600K +), the performance degrades substantially.
There are not a lot of subreports, and I've narrowed it down that the queries are not taking significant amount of time to execute. I'm using the JRC Helper Sample code, exportPDF call in order to create these reports.
For small reports (e.g. < 40k) we are looking at a few seconds. When we start executing the larger reports we are seeing them in 6-20+ minute range.
Weblogic version is 8, jdk 1.4.
Any suggestions? We are not using stored procs, just straight JNDI/JDBC calls.
Thank you for your time,
Scott

Hi Scott,
I recommend to put this question in our [Java dev f|Java SDK Application Development;orum
Best regards
Falk

Hide Parameter Pane using Report Properties Code

Hi,
I want to collapse the Parameters pane by default when the users view the report through the URL.
I have read other similar threads and understood the below.
It is possible by appending the command rc:Parameters=Collapsed. But this is only in ReportServer URL and not in Reports URL.
This works fine. But, when the user accessing the report from
http://servername/ReportServer, you cant expect him to append this text everytime. I also found that it can be somehow achieved using Report Properties Code. But, since Im new to that, unable to get how to achieve the same.
Could someone share an example of how to set the default property of rc:Parameters to Collapsed using Code?
Thanks,
Akalya

Hi Akalya,
According to your description, you want to hide parameter pane when the user accessing the report from Report Manager. To achieve this goal, we can click “Show/Hide Parameters” arrow to hide the parameter pane after view the report from Report Manager.
Besides, if I understand correctly, you had specify default values for all report parameters, so you want to hide parameter pane. If in this scenario, we can hide all parameters and then the parameter pane will be hidden.
For example, open the report Properties page on Report Manager and go to Parameter tab, click the "Hide" selection for all parameters. We can also hide the parameters by specify the parameter visibility with "Hidden" before you deploy the report to Report
Server.
If there are any other questions, please feel free to ask.
Regards,
Katherine Xiong
Katherine Xiong
TechNet Community Support

How to list all tables/stored procedures used by the report

All the reports i create are getting data from stored procedure(s). Is there a way to obtaining a listing of all the stored procedures without having to open report by report and check under Database > Set Datasource Location > Properties > Table Name?
Finding this info it would be extremely valuable, as it would help me to judge the impact of any changes that i might be considering to one or more of the stored proc.
So far i maintained a manual listing but it is not up-to-date and reliable. I would rather prefer to get an updated listing every time i want to change/drop a stored procedure.
Thanks so much for your help.
Rick

Dell can you be a little bit more specific about the SDK solution. I could ask one of the developers to help me but i need to gather more details.
I took a look .rpt inspector Pro but it does not do what i need. All i need is the the listing of all the database tables (in my case stored procs) used in my reports. No need to replace or change anything. I need to scan the directory where i have all the reports for the different applications and get report names and table/stored procs used. i can export the txt file to excel and that's all.

T.code FEBC: the repport list doesn't contain the report RFEBIT00

Hi All,
when I launch the t.code FEBC, SAP provides me a list of report among which I've to choose the one I need.
But the list doesn't contain the report RFEBIT00..... How to add it to the list?
Thanks
Gandalf

Hi,
Please do coordinate with your technical consultant(ABAP) for the reolution.

List of useful MM Std Report T code : Especially CIN

Similar Messages

Maybe you are looking for