List of UserGroups in Release 2

Hi,
I am using the portal which comes with Oracle 9iAS Release 2. I am aware of the fact that the UserGroup informations are no longer stored in wwsec_group and are now stored in OID.
(1) Which is the table that holds the name of the UserGroups that i have created ? Basically, i need to get the list of the UserGroups that i have created. How can i achieve this ?
(2) I have looked at wwsec_oid package. I dont see any procedures or functions doing this. Whats the package i should be looking at ?
Thanks in advance,
- Karthik

Are the bad characters known in advance which you want to remove? If yes, then you may want to use nested replace commands.
See these blog posts
http://beyondrelational.com/modules/2/blogs/78/posts/11140/cleanse-all-character-fields-in-a-table.aspx
and
http://beyondrelational.com/modules/2/blogs/78/posts/11141/remove-bad-characters-from-a-string.aspx
For every expert, there is an equal and opposite expert. - Becker's Law
My blog
My TechNet articles

Similar Messages

List of Monthly Overall Released PR

Hi,
I want to generate a list of over all released ( Authorized by Highest Authority ) PR for a particular Month. Is there a Standard Report Available ?
Please give your expert views.
Regards
Shyam Kogta
09871894536

Dear Shyam,
Standard report ME5A has the selection option as Release date, but this is not the actual release date.
This date is only statistical date by which PO should be initiated.
To have a report based on actual release date you have to develop the zreport.
Manoj

If not listed under "Known Affected Releases", is it considered "Confirmed Not Vulnerable"?

I have a hard time believing only this version of UCS is vulnerable... Since there is no distinction to identify versions "Confirmed Not Vulnerable"; If the version is not listed under "Known Affected Releases", does it mean it is not vulnerable or could it also mean it wasn't tested/verified?
While we are on the topic, how many versions back does cisco check?

My daughter has had her Razr for about 9 months now. About two weeks ago she picked up her phone in the morning on her way to school when she noticed two cracks, both starting at the camera lens. One goes completely to the bottom and the other goes sharply to the side. She has never dropped it and me and my husband went over it with a fine tooth comb. We looked under a magnifying glass and could no find any reason for the glass to crack. Not one ding, scratch or bang. Our daughter really takes good care of her stuff, but we still wanted to make sure before we sent it in for repairs. Well we did and we got a reply from Motorola with a picture of the cracks saying this was customer abuse and that it is not covered under warranty. Even though they did not find any physical damage to back it up. Well I e-mailed them back and told them I did a little research and found pages of people having the same problems. Well I did not hear from them until I received a notice from Fed Ex that they were sending the phone back. NOT FIXED!!! I went to look up why and guess what there is no case open any more for the phone. It has been wiped clean. I put in the RMA # it comes back not found, I put in the ID #, the SN# and all comes back not found. Yet a day earlier all the info was there. I know there is a lot more people like me and all of you, but they just don't want to be bothered so they pay to have it fix, just to have it do it again. Unless they have found the problem and only fixing it on a customer pay only set up. I am furious and will not be recommending this phone to anyone. And to think I was considering this phone for my next up grade! NOT!!!!

User-defined selection list support in HA Release 6.5

Dear all, As in Hyperion Wired for OLAP v4.1.2 and Hyperion Analyzer Release 5.0.3, it can allow users to create user-defined selection list for a dimension under "Advanced" option of Cube Navigator, is there the same function in Hyperion Analyzer Release 6.5? If no, is there any turnaround or alternative?Thanks for your help.Regards, Zero

Hello,
You must have defined user command for the radio button. This is not required. Just try putting it in at selection screen. AT SELECTION-SCREEN ON RADIOBUTTON GROUP rgp1.
the moment the user clicks the radio button it will go to this event and call the screen. Just use AT SELECTION-SCREEN.
Regards,
Shekhar Kulkarni

WHAT HAPPENED TO THE HUGE LIST OF NEW ALBUM RELEASES?

on the last itunes version you could view long lists of recent new alum releases in itunes. Usually over 50 per week. It seems this has been reduced to 1 or 2 pages of pictures. I used to love those long lists to discover new music...can I still view those lists?? I hope so. Someone help.

Click on the music store link, then click on "new releases" at the top of the page.

Chinese Word list Update 1.2 released on October 31, 2012, but it won't update my MBPr

One more time, I have learned that Apple has just released Chinese Word list Update 1.2 on October 31, 2012
For unknown reason, this update, similar to version 1.1 releaed on October 5, 2012, won't update my 15 inch MBP Retina running OSX 10.8.2
I have managed to get chinesewordlistupdate.pkg version 1.1 for manual install from http://reviews.cnet/com/macfixit
But when i phone Apple Tech support, they said this update is not available for download and manual installl. Indeed, it's available!
So can any friend here point me to download chinesewordlistupdate.pkg version 1.2 please, so that i can manually install it

I haves posted this to bugreport.apple.com. Hope I can get solution from Apple Developer, although it's so difficult to get response from them:
On a software name Appfresh, it alerted me to update my MBPr 15 inches running latest OSX 10.8.2, with Chinese Word List Update 1.2. When I clicked on Software Pdate, app Store return No update available.
My system have Chinese Word List Update 1.0 installed, and on October 5, 2012, Chinese Word List Update 1.1 was released by Apple, as alerted through AppFresh. However, this update never get updated on m system. I have to manually download chinesewordlistupdate.pkg from reviews.cnet.com/macfixit and install it manually. By doing so, I have Chinese Word List Update 1.1 on my system.
The same problem occurred again today on November 5, 2012, where Chinese Word List Update is released by Apple. again, it fail to update from Software Update menu.
Can you please:
1. Explain why this problem occurred. This is so annoying.
2. Advise me how can I get this Chinese Word List Date to update to version 1.2. Can you please send me the chinesewordlistupdate.pkg for version 1,2 so that I can manually install it on my system?
3. How can I prevent similar problem with he subsequent version?
Why Apple don't make this update standard as other update?
Support please. Thank for response in advance.

Wish list for the next release

Some things I would love to see in the next release of Xcelsius:
- Making the software more stabile/robust!
- Being able to switch an existing chart from Line chart to bar chart etc., without having to manually create the object from scratch again (in Webi one can easily change the visualization of an existing chart for example bar chart to a line chart at a click of a button).
- Providing more markers for the graphs
- Being able to create layers of objects, which would be useful if you have objects overlaying each other using dynamic visibility.
- A horizontal bar chart uses the underlying data sorted from bottom to top, this is counterintuitive.
- If one is using multible tabs on the dashboard having a navigation bar for all the tabs (similar to Powerpoint for the different slides)
- Being able to select/mark various data points on the dashboard and group them for further analysis (see Tableau saoftware)
- Being able to easily create small multiples (for example create the same chart type for each product category, the individual charts displaying revenue by month)

So far, the only thing I have on my wishlist is to be able to turn iterations on in the Excel file that is uploaded. I haven't even been able to use the program yet because the files I need Xcelsius to work with all contain circular references which require iterations. Instead, they just crash the program since iterations always get turned off when a worsheets up uploaded.

Empty list in Purchase Order Release

I have the components and notes applied as suggested for the Approve Purchase Order Application.and configurations are done as required in the document.App Implementation: Approve Purchase Contracts - SAP Fiori principal apps for SAP ERP 1.0 - SAP Library
Back-End/Front-End Server
Back-End/Front-End Component
Technical Name of Software Component
Support Package Level
Back-end server
Back-end component
SRA001 1.0
04
Front-end server
Front-end component
UIX01EAP 100
03
But the Po s are not displayed in the application. and no errors are thrown in the chrome console. attached are screenshots for suggestions
NO Purchase Orders count and no errors in the console.
No Purchase Orders displayed and No errors in the console
QUery of the workflow returing Null values from the request
WorkFlow Collection empty in the gateway query
i had also checked the task id properlyassigned and maintained in backend
spro -> mm -> purchasing -> Purchase order ->Approve purchase order app
and checked Trusted RFC Connection was maintained properly.
Log on security was filled with Current user.
I have unreleased PO in my system but not displayed.
How can this issue be resolved ?please suggest

i realised that i have nt configured and defined an approval scenarion in my gateway SPRO settings.
To do the same i am following the guide http://help.sap.com/saphelp_fiori/fiori10_install_en.pdf page 58 , to define an approval scenario.
As per the guide should define an approval scenario in spro at
In your SAP NetWeaver Gateway system, run transaction SPRO and choose SAP Reference IMG >SAP
NetWeaver >Gateway Service Enablement> Content >Task Gateway Service> Scenario Definition .
and i could find the exact location to define a scenario
my settings screenshot in SPRO, and Scenario Definition is not available in SP08 embedded gateway system

ITunes movies: list of upcoming releases: where did it go?

HI there,
anybody know where to find the list of upcoming movie releases? iTunes used to have a quick link for this, but nowadays I can't seem to find it.
Thanks in advance!
B.

Hey Burliness,
Thanks for the question. The iTunes Store has a section that outlines future iTunes releases available to pre-order:
Pre-Order Movies
https://itunes.apple.com/WebObjects/MZStore.woa/wa/viewMultiRoom?cc=us&fcId=1888 22088
As for future theatrical releases, you may be interested in checking out our iTunes Movie Trailers website:
iTunes Movie Trailers
http://trailers.apple.com
Thanks,
Matt M.

Complete List of Apps Released in 2013

I'm looking for a complete list of the apps released in 2013. Could you help me to track this down? All I keep running into online is "Top ___ Apps of 2013" lists.
Thanks!

Completely understandable. I guess a better way to phrase it would have been...
Could anyone help to point me in the right direction?
Thanks!

Report to show invoice documents those were released for payment

Hello Gurus,
Could anybody help on the below requirement?
Is it possible to run a report that would list invoices that were released for payment that had had a block on them?? Example: an invoice is waiting on a goods receipt and it is posted. Once the receipt is posted the Invoice Exception Analyst release the block on MRBR. Is there a report that we can run to show what was released on any certain day or period??
Thanks,
Amol

hi,
Go to MIR5...
Here drop the list by clicking the button near origin n status...here tick on the manually accepted button...
Then in the main window itself click on the posted as invoice status....Enter the date as posting date and execute...it will show you the list...
Regards
Priyanka.P

Report of recently released sales orders

Hi,
Aside from VKM1, is there a standard report that lists down all recently released sales orders (from credit block). Preferably, the report can be listed down by the dates it was released.
Thanks!

Hi Mani,
Thanks for the program name. However, I'm looking for a report that will list all sales orders that has recently been released. I ran the report you specified, and it's limited to the changes done on a particular sales order.
Thanks!

Report to show invoice document which were release for payment

Hello Gurus,
Could anybody help on the below requirement?
Is it possible to run a report that would list invoices that were released for payment that had had a block on them?? Example: an invoice is waiting on a goods receipt and it is posted. Once the receipt is posted the Invoice Exception Analyst release the block on MRBR. Is there a report that we can run to show what was released on any certain day or period??
Thanks,
Amol

hi,
Go to MIR5...
Here drop the list by clicking the button near origin n status...here tick on the manually accepted button...
Then in the main window itself click on the posted as invoice status....Enter the date as posting date and execute...it will show you the list...
Regards
Priyanka.P

Report for PO Release

Dear All,
Is there any report available that gives me the list of PO's release by auser or by some release code on specific date.
Prashant

Hello Prashant,
Check if you can use ME28 (with flag cancle release) to meet your requirement.
if not then you need to develop report. PO release is considerred as PO change and that will be updated in CDHDR and CDPOS table so you need to develop a report which can give the information, who has released the PO and on which date.
Hope this helps.
Regards
Arif Mansuri

What is the table field for PO releaser in R/3 (4.7 Enterprise)?

Hi Gurus out there:
Do you know if there is a table field for PO releaser in R/3 (4.7 Enterprise)?
We use for e.g. the transaction ME29N to release a PO and I haven't been able to find a DB table where the PO releaser is stored.
In DB table EKKO I can find the fields FRGGR (Release group), FRGSX (Release strategy), FRGKE (Release Indicator), FRGZU (Release status) and FRGRL (Release Not Yet Completely Effected) but no information of the user who released the PO.
Many thanks in advance.
/hw

Hi
<b>Have you tried reading the details of the PO Releaser using the BAPIs ?</b>
BAPI_PO_GETRELINFO
BAPI_PO_GETITEMSREL
BAPI_PO_GETITEMSREL            List Purchase Orders for Release (Approval): New as of 4.0A
BAPI_PO_GETRELINFO             Display Detailed Release (Approval) Information on Purchase Order
BAPI_PO_RELEASE                Release Purchase Orders
BAPI_PO_RESET_RELEASE          Cancel Release of Purchase Orders
<u>Related link -></u>
Re: How to fetch data from back end for PO?
Hope this will help.
Do let me know.
Regards
- Atul

List of UserGroups in Release 2

Similar Messages

Maybe you are looking for