List of variables available for use in email templates

Hello,
I would like to replace the $(resourceAccountId) variable with the AccountID (or
Name) variable in the Password Synchronization Notice email template.
If anyone can tell me where I can found the list of variables (or tell me the
variables themselves) which are available for use in the email templates I
would be grateful.
Thanks,
Bert

Bert,
The workflow that uses the notification template can pass any value that you want. All you need to do is modify the workflow to pass the value and then have reference to that value in your template.
Other than that you can use the attributes that are available to you in IDM.
~Suvesh

Similar Messages

Formatting icons not available for Constant Contact email templates - just blank images appear

Hello:
My Firefox 3.6 doesn't allow me to see the icons in aWeber or Constant Contact. These are icons that I need to see when formatting an email in a template. The same thing happens in aweber. Constant Contact says it is a Firefox problem. I do not have any add-ons added.
Thank you,
Susan

I use WordPress with TinyMCE modifications to make sure HTML code is written correctly. Emails are not coded the same way as web pages. Also, I use str_replace and preg_replace within the template to make sure the editor won't have any code that I do not want, for example I take <p align="center">...</p> and replace them with <center>...</center>, and some other modifications that I find fitting due to HTML Email code reqs. If you're not sure how to buffer, find and replace content in WordPress, you could also use a WordPress plugin - Real-Time Find and Replace I believe it's called. I just have many templates so I need custom replacing, this plugin does it for every page. I also installed one of the Multiple Blocks plugins that create multiple blocks within your Page/Post. With that you can create as many editable fields as you need. I send emails manually, but I came accross the code once that actually will allow you to submit your content within the same page, I dont have the link, I found it googling HTML emails and wordpress. You may also look into PHPList emailing software (free) in addition to this. You can plug the final HTML code your browser produces into there and then email it out using their emailing system, since you get more control over your lists and so on. If not I guess you could implement one of the custom fields in WordPress as a email list.

This email address is not available for use as an Apple ID

hi
i had two apple accounts
and just wanted to change the primary email address for the both with each other
when i changed the first one my old email cant be used with other account then i tried replacing my old email it doesnt replace it says
This email address is not available for use as an Apple ID. You may already have an Apple ID associated with this address. Please try again or sign in using your existing Apple ID.
please help me

Yes, I am having the same problem. When I called apple they said that things were "tied up somehow" with another account that has a do different birthday than me. Uuuuuhh? So that means someone else can log in?... I have a feeling there is a big vulnerability with the three login options, just like with the current and past password retrieval. Apple had only suggested that I delete my current set up on my serviced and make a new ID and email.
I Just got a new email and made a new Apple ID account For now. I was hoping the email would work itself out. I assumed If I could make sure everything was verified, not associated with another account, and try to get rid of the alternate id and second email option also used to sign in (seen in Apple ID management) that could possibly be construed or mixed up with something else that it would eventually free up and become "available" again. Unfortunately im still waiting In hopes in just needs to recognize the email isn't associated with anything.
I have had a few major concerns with apple products lately especially with security. My iPhone 4s was hacked too. Some ******* was listening/recording and when I hooked to Internet he sent out the recorded portion that was available. Talk about ****** up.

How to delete old account, I can't log in due to - This email address is not available for use as an Apple ID. You may already have an Apple ID associated with this address. Please try again or sign in using your existing Apple ID.

How to delete old account, I can't log in due to error - This email address is not available for use as an Apple ID. You may already have an Apple ID associated with this address. Please try again or sign in using your existing Apple ID.

All good, I loved with AppStore and now everything seems to be back to normal.

This email address is not available for use as an Apple ID. You may already have an Apple ID associated with this address. Please try again or sign in using your existing Apple ID.

I want to change my apple id but get the message "This email address is not available for use as an Apple ID. You may already have an Apple ID associated with this address. Please try again or sign in using your existing Apple ID.". I try to log a call with apple support and I get a message like "cannot schedule a call". That leaves me out of options. Any ideas?

Hi billfromwandering,
I'm sorry to hear you are having these issues changing your Apple ID. It is correct that if an email address has been used previously for an Apple ID, it can not be used for a different Apple ID, as noted in this article:
In most cases, your Apple ID is also the primary email address of your Apple ID account. You can change your Apple ID to any other email address you control, as long as it's not already in use as an Apple ID. If your email address ends with @icloud.com, @me.com, or @mac.com, it's already an Apple ID.
Change your Apple ID - Apple Support
If you are certain that the email in question has never been used for an Apple ID and you are having issues contacting Apple Support regarding this issue, you may want to make sure you are going through the Apple ID support channel on the following page:
Apple ID - Contact - Apple Support
Regards,
- Brenden

Is Firefox available for use in a Citrix environmet, what are the licensing implications

Is Firefox available for use in a Citrix environmet, what are the licensing implications

Licensing is easy: the [http://www.mozilla.org/MPL/2.0/ Mozilla Public License] is free and open. Naturally, it contains the customary disclaimers and limitations.
Implementation might be more of a challenge because Firefox presumes certain things about the system.
I suggest joining the Enterprise Working Group Mailing List to connect with an audience of corporate implementers on this issue and search the list archives.
* http://www.mozilla.org/firefox/organizations/
* https://mail.mozilla.org/listinfo/enterprise
If you find other good resources, would you mind contributing them back to this thread? Thanks.

AI Control gives error: 10452 occurred at AI control. Possible reasons: NI-DAQ LV no interrupt level is available for use.

How can I run out of interrupts while accessing my DAQPad? Does
the community have troubleshooting suggestions?

You don't say which DAQpad. If this is a device on your parallel port then
you will need to make sure that the parallel port has an interrupt assigned
and not just a base address.
Check out the following from the NI Knowledgebase:
http://digital.ni.com/public.nsf/3efedde4322fef19862567740067f3cc/bf7960eb90
ef882a8625654e007d8b1a?OpenDocument
Ian
"Riverside Consulting, LLC" wrote in message
news:[email protected]..
> AI Control gives error: 10452 occurred at AI control. Possible
> reasons: NI-DAQ LV no interrupt level is available for use.
>
> How can I run out of interrupts while accessing my DAQPad? Does
> the community have troubleshooting suggestions?

HT204149 What is the maximum resolution available for use with the Apple Mini DisplayPort to Dual-Link DVI adapter?

What is the maximum resolution available for use with the Apple Mini DisplayPort to Dual-Link DVI adapter?

Hey guys,
I found out an answer by myself...
The missing link : the MacBook Pro needs to be powered... as in you need to plug the charger in...
In conclusion, you simply plug everything, turn on the MacBook Pro, close the lid, and there you go !

4S ios updated to 7 is giving me problems for using wifi Thus it is difficult for me to use internet. The wifi comes on for a while and goes off in a few minutes The phone is unable to scan networks available for use

4S ios updated to 7 is giving me problems for using wifi Thus it is difficult for me to use internet. The wifi comes ON for a while and goes off in a few minutes The phone is unable to scan networks available for use
Am having ipad2, ipad mini and iphone 4 with family of two persons. One hp laptop and a DELL professional computer also in operation
Myself an engineer for projects
Looks the company apple cannot grow if they do not support solving the problems of their existing customers
Ashok Dhingra
India

You are not addressing Apple here. If you have a problem, describe it and someone might be able to help. Just to be sure, the wi-fi on the phone will go off after the phone goes into sleep mode unless it is actively being used. This is a battery saving measure. If you are actively using the internet, and the phone is still awake, then the wi-fi should remain connected.
What troubleshooting steps have you tried.

Any tutorials/demos available for using BPEL alongwith Struts or JSF

Hi All
Are there any sample tutorials/demos available for using BPEL alongwith Struts or JSF ?
Thanks
Badri

Not sure if this is of any help, it uses ADF which is basically a JSF page.
http://www.oracle.com/technology/products/jdev/viewlets/1013/bpelfromadf_viewlet_swf.html
there is also some tutorials you may be able to use in the following directory
SOA_HOME/bpel/sampels/Tutorials/102.InvokingProcesses
cheers
James

"Error -10452 occurred at AI singlescan, no interrupt level available for use."

AI sample channel (single point waveform).vi
Error -10452 occurred at AI singlescan.
Possible reasons:
NI-DAQ LV: No interrupt level available for use.
I have configured 2 virtual channels to use AI chn0 and chn1 in Measurment and Automation explorer, but I get error -10452 in the test panel.

SS 01,
In order to better troubleshoot this error, can you tell me what board you are using, what operating system you have, and what versions of NI-DAQ and LabVIEW you have installed?
Have a great day.

When will isis wallet be available for use with the iphone

When will isis wallet be available for use with the iphone?

I just found this information at https://www.paywithisis.com/help.html
It says: Coming soon for iPhone® - To use the Isis Mobile Wallet on an iPhone 4, iPhone 4S or iPhone 5, you’ll need an Isis Ready case containing a Near Field Communication (NFC) antenna. Check with your mobile carrier for availability.

My storage capacity has diminished and won't recapture when I delete apps/pics/songs. I'm down to 13.3 GB and no bytes available for use.

I'm down to 13.3 GB and no bytes available for use.

You need to do a Restore. It's easy to do but it's reasonably time-consuming. Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."

HT4847 hi! I keep receiving a message that I have exceeded my iCloud storage yet my iphone says I have 24.4 Gbytes out of 25 available for use! Why do I keep getting a full message in my email?? Thanks for help to relieve me of this conundrum!

The organisers seem to be keen on making me spend £70 simply to store on iCloud! help!!!
Keenlad

The message may be talking about icloud storage -or- available memory on your device.
Go to Settings>General>Usage to see how much "Storage" you have available. Farther down the list is the available storage on iCloud.
Also check:
Go to Settings>iCloud>Storage & Backups>Manage Storage; there, tap the device you need info on and the resulting screen lists Backup Options with which apps store data on iCloud.
A device needs many MB of storage in order to perform a backup to iCloud.
Also see: http://support.apple.com/kb/ht4847

Isn't Adobe Color available for use with desktop applications?? It looks like Adobe Kuler has NOT been replaced with Adobe Color - It has been Deleted!

It looks like the new Adobe Color is for iPad / iPhone only. Why isn't it available for desktop use like Kuler?
Kuler server seems to have been turned off. Why? Kuler and colour themes were very useful.

Adobe Color CC

List of variables available for use in email templates

Similar Messages

Maybe you are looking for