List out Inactive HANA view

Hi,
Our Team have created so many Inactive view ( Attr, Ana, Cal) and they didn't deleted those view. I want to list out all inactive view. How to find out those view.
Regards,
Kamruz

Thanks for you your mail. I cross checked once again.
No INACTIVE _OBJECT is displaying under this schema.
Only below 4 tables are showing.
ACTIVE_OBJECT
ACTIVE_OBJECTCROSSREF
ACTIVE_OBJECT_TEXT_CONTENT
ACTIVE_TAGS

Similar Messages

Explorer error "Failed to retrieve the Information Spaces list." from HANA

I am getting this dumb error "Failed to retrieve the Information Spaces list. // Request timed out" in Explorer's "Manage Spaces" area every time I click on the analytic view listed under my HANA sources of the Explorer. So, my HANA source is visible, and analytic views are visible in Explorer as well, but I cannot get any Information Space created because of the error, and I could not find the error and its causes in Explorer docs.
I already
- upgraded HANA db to Rev 18 (for some reasons I cannot u[grade this system to SPS3 yet) and BIP and Explorer 4.0 are on the latest Patch 8 of SP2.
- configured connection using IDT defined connection,
- restarted servers in CMS already 100s of times.
There is enough free space on the BO server's drive: 33GB. BO is a single server based on Win2008 R2 SP1 with 40GB RAM.
Any ideas what else I can do to get rid of this issue? It is a test server, so I cannot open customer msg to SAP Support.
Thanks,
-Vitaliy

Try increasing the timeout under
..\SAP BusinessObjects\Tomcat6\webapps\explorer\WEB-INF\classes\ default.settings.properties
from
request.timeout=60
to
request.timeout=600

Best Approach for Reporting on SAP HANA Views

Hi,
Kindly provide information w.r.t the best approach for the reporting on HANA views for the architecture displayed below:
We are on a lookout for information mainly around the following points:
There are two reporting options which are known to us and listed below namely:
Reporting on HANA views through SAP BW (View > VirtualProvider > BEx > BI 4.1)
Reporting on HANA views in ECC using BI 4.1 tools
Which is the best option for reporting (please provide supportive reasons : as in advantages and limitations)?
In case a better approach exists, please let us know of the same.
Best approach for reporting option on a mixed scenario wherein data of BW and HANA views is to be utilized together.

Hi Alston,
To be honest I did not understand the architecture that you have figured out in your message.
Do you have HANA instance as far as I understood and one ERP and BW is running on HANA. Or there might be 2 HANA instance and ERP and BW are running independently.
Anyway If you have HANA you have many options to present data by using analytic views. Also you have BW on HANA as EDW. So for both you can use BO and Lumira as well for presenting data.
Check this document as well: http://scn.sap.com/docs/DOC-34403

How to Figure Type of HANA View in ABAP?

Hi,
Is there a way in ABAP to find out (by looking up some table or calling an FM/method) the type of a HANA view? I have an ABAP system that has a HANA database. Views of different types (calculation, attribute, analytic) have been created in HANA. In my ABAP code, I have the name of the view from which I want to find out the type of the view. Any ideas?
Thanks,
Akshat

Hi Kumar,
why would you need to know at all?
Anyways, you would have to know the name of the corresponding HANA entity. That is displayed when you open the external view in the ABAP Development Tools in Eclipse.
Additionally, you would have to know to which HANA Transport Container the HANA view belongs, have a look at the HTC (in the ABAP Development Tools in Eclipse). There are two tabs "Overview" and "Content". On the "Content" tab, you can find a list including package, name, and the type information you are looking for.
Cheers,
Jasmin

Authorization Issue while Data Preview from HANA View

Hi Experts,
We are using BW on HANA. We have created DSOs (info provider) in BW and generated HANA views from there. We have also created analysis authorizations in BW for authorization relevant characteristics. In HANA, we are able to go to the generated analytic view and preview the data from it successfully.
Now I have created a test user and assigned a custom role with below authorizations to this user in HANA:
- bw2hana/../REPORTING role (this role is automatically created by activation of DSO in BW).
- Roles MODELING, MONITORING, CONTENT_ADMIN, USER.
- Multiple system privileges although not needed, like REPO.EXPORT, REPO.IMPORT, etc.
- Analytic Privilege _SYS_BI_CP_ALL
- Package Privilege: REPO.READ for all required packages (tried with ROOT package also).
In BW system also, the test user has analysis authorizations providing access to the relevant info objects.
But when I am trying to preview data for HANA view, I am getting attached error (also listed below):
"Cannot get the data provider outline
SAP DBTech JDBC: [2048]: Column store error: Search table error: [2950] user is not authorized"
I tried to trace the situation is HANA and got below details in 2 trace files:
indexserver_alert_saphana.trc:
[6433]{416977}[66/-1] 2014-10-14 00:59:27.541187 e CalcEngine       ceAuthorizationCheck.cpp(02365) : AuthorizationCheckHandler::addAPsToSearchObject: Error during converting SqlAPs to Query entries
indexserver_saphana.31003.075.trc
[6433]{416977}[66/-1] 2014-10-14 00:59:27.541197 i TraceContext     TraceContext.cpp(00702) : UserName=TEST_SSO, ApplicationUserName=<<computer name >>, ApplicationName=HDBStudio, ApplicationSource=csns.modeler.datapreview.providers.ResultSetDelegationDataProvider.<init>(ResultSetDelegationDataProvider.java:118);csns.modeler.actions.DataPreviewDelegationAction.getDataProvider(DataPreviewDelegationAction.java:278);csns.modeler.actions.DataPreviewDelegationAction.run(DataPreviewDelegationAction.java:242);csns.modeler.actions.DataPreviewDelegationAction.run(DataPreviewDelegationAction.java:127);csns.modeler.command.handlers.DataPreviewHandler.execute(DataPreviewHandler.java:53);org.eclipse.core.commands
[6433]{416977}[66/-1] 2014-10-14 00:59:27.541187 e CalcEngine       ceAuthorizationCheck.cpp(02365) : AuthorizationCheckHandler::addAPsToSearchObject: Error during converting SqlAPs to Query entries
Do you know what this "Error during converting SqlAPs to Query entries" actually means"? How can we resolve this issue? The authorization is working properly for our user ids. But we need to provide restricted access for business users so trying to create test user and custom role.
Thanks
Nitesh Gupta

Hi Pinaki and Prabhith,
Yes, my issue was resolved. Sorry, missed to updated here.
I was just a beginer for BW on HANA Security at that time and didn't know many small things. The solution was pretty simple.
Whenever you assign analysis authorizations to a user in BW, you also need to generate corresponding HANA authorization. This is done through tcode RS2HANA_CHECK tcode. This tcode converts BW analysis authorizations into HANA analysis authorizations and assign to the HANA user. You can see generated HANA authorization table RS2HANA_AUTH_STR in both BW and HANA.
Once the HANA authorizations are successfully generated for a user, he should be able to see data from Views.
Let me know if this solves issues. Then I will close this thread.
Thanks

Is there a way to LIST OUT all of the active images that are currently being used on a page in Dreamweaver?

Is there a way to LIST OUT all of the active images that are currently being used on a page in Dreamweaver? Or do I have to click each one and write down the image name by hand?
Thanks!
LJ

Alternatively use a browser:
Use the Firefox Web Developer Toolbar
https://addons.mozilla.org/en-US/firefox/addon/60
Images > View Image Information
or the List All Images Add On for Firefox
https://addons.mozilla.org/en-US/firefox/addon/3688
or the Web Developer tools in IE8 (or earlier), F12 > Image > View Image Report

WHY HANA VIEW ARE GIVING BAD PERFORMANCE IN DASHBOARD THEN TABLE

Dear Experts ,
I have created a dashboard on top of HANA view.
Scenario 1
HANA view is taking 3 seconds to fetch data in HANA studio .
When we create dashboard on that view, the dashboard is taking around 50sec.
Report has around 10 queries.
Scenario 2
Then we insert data into a table from same above view .
HANA table is taking 10 ms to fetch data in HANA studio .
When we create the same dashboard on that table, the report is taking
around 4 Seconds.
Report has around 10 query.
You may raise finger on dashboard tool. But by only converting view to table dashboard is giving good performance .
Please suggest what should we use Table or View for reporting tool ????
Only performance matter to Users and that's why we have taken HANA.
Thanks
Anupam.

"When you use attribute view in calculation view, hana will first build the attribute view first it will process all the data from memory in attribute view and then only will proceed with the calculation view."
That's actually completely false.
Attribute views are not materialized in full every time an Analytic View is queried. On the contrary, only the joins/materialization required to fulfill the query are performed. I have rolled out Analytic views with 50+ attribute views joined to them, if every one was built every time the AV was used, that would be a disaster.
An attribute view is fully executed if you query it directly with SQL, but the behavior changes when used in an AV.
Quick observation in good faith of my statement.
Query an analytic view with one column from a joined attribute view (Material - MARA)
SELECT "PAPH1", SUM("VVREV")
FROM "_SYS_BIC"."Main.Analytics.CO/AN_COPA"
WHERE "PERIO_T" = '2013010'
GROUP BY "PAPH1"
Only one join is executed to the fact table
Query an analytic view with one column from a joined attribute view (Material - MARA), plus another column from a joined table (T179T) inside the attribute view (snowflaked dimension).
SELECT "PAPH1", "VTEXT_1", SUM("VVREV")
FROM "_SYS_BIC"."Main.Analytics.CO/AN_COPA"
WHERE "PERIO_T" = '2013010'
GROUP BY "PAPH1", "VTEXT_1"
Only two joins are executed; one to the snowflaked dimension and one to the fact table
So even though I am issuing a query against an AV with a very large number of dimensions, only what is needed is actually executed.
Happy HANA,
Justin

To find the list of Inactive objects in the Production system.

Hi Experts,
Need a help. I want to find the List of inactive objects in the Production system. Do we have any standard program or any transcation code to find.
Appreciate your help.
Thanks,
Venkata.A

Check below threads -
Check Inactive Objects in System
Need program to find the inactive objects
Tcode for finding out the inactive BI Objects

Do we have any method to list out the servers that are critical and the component/monitor causing the server to turn into critical state in SCOM 2012

Hello Team,
We are monitoring 1000 servers in our environment and out of 1000 servers, we have approximately 100 servers showing as critical state on the server state view.
We can get the critical servers list from SCOM console, but we are not able to get the information about the component responsible for the server to be critical. Using Health explorer to find the root cause for 100 servers is really impossible and time consuming.
Do we have any method to list out the servers that are critical and the component/monitor causing the server to turn into critical state?
Advance thanks for your help.
Regards,
Dinesh
Thanks & Regards, Dinesh

Hi,
As far as I know alerts with severity as criticla may cause windows computer in a critical state, we can try below code to find all critical alerts：
get-alert -criteria 'ResolutionState=0 AND Severity=2' | select Name,ResolutionState,TimeRaised | export-csv c:\Alerts.txt
Criteria Syntax http://msdn.microsoft.com/en-us/library/bb437603.aspx
Values to use.
Resolution State
Severity Values for Alerts
0 = New
0 = INFORMATIONAL
255 = Closed
1 = WARNING
2 = CRITICAL
Hope this helps.
Regards,
Yan Li
Regards, Yan Li

I cannot figure out how to view the history of pages so I can easily go back to a page I may have been in 10 clicks ago.

In the latest version, I cannot figure out how to view the history of pages so I can easily go back to a page I may have been in 10 clicks ago. I don't want to have to hit the back button 10 times, I want to be able to view a list of the past clicks and pick where I want to go back to. How do I do that now?

Click-hold the unified Back / Forward button, or right-click it to get the Back / Forward history for that tab.
Or install this extension to get the old "drop-marker" button restored. <br />
https://addons.mozilla.org/en-US/firefox/addon/backforedrop/

Just recently my messages app will not rotate out of horizontal view. All other apps do - anyone ever have this happen?

Help list,
Just recently my messages app will not rotate out of horizontal view. All other apps do - anyone ever have this happen? Know what I can do?
Allen

I also forgot to note that this problem also persists with the new iBooks application. I cannot get past the 'Get Started' screen or access the iBooks Store. Again, all top bar menus are unresponsive.
DT

List out codes

Hi,
How to list out all t-sql codes within the database, that is doing any change against one specific table name?
Many Thanks & Best Regards, Hua Min

Are you asking about modules like stored procedure, UDF etc which refers the table? If yes, you can use sys.sql_modules catalog view for that
see
http://visakhm.blogspot.in/2012/03/advantages-of-using-syssqlmodules-view.html
If you want adhoc queries also then thats not straightforward
Please Mark This As Answer if it solved your issue
Please Vote This As Helpful if it helps to solve your issue
Visakh
My Wiki User Page
My MSDN Page
My Personal Blog
My Facebook Page

Monthly report listing out ALL open PO

Hi,
As our management requested, we need a monthly report listing out ALL open PO for CDG, APR Someone tell me to input cost centre but it is time consuming to input it as we have over 100 cost centers. Do you know if I can input SPG/profit center or other data to run this report instead ? Please advise the transaction code and how to perform it, such as need to know the profit center #, organization code etc
Thanks
Raja

hi
go to ME2N
then select Scope of list ALV
Selection parameters as WE101 Open goods receipt (select as per ur need )
then execute u will get the list for open po
now if u want it to specify the profit center then go to ME2N and select dynamic selecion (shift +F4)
now u will get a smaal scrren , in purchaseing doc item selct profit center
now u can see the profit center selection field ,give a proper profit center and follow the process as given above
hope it help
regards
kunal

How to hide a list from SharePoint tree view pro grammatically.

Hi,
I have enabled tree view for a SharePoint 2013 site pro grammatically.
I want hide some specific lists from that tree view like Documents, Workflow, Task List, Calender
Lists which are created default when we create a site.
How could i do that?

I know how to hide Quick launch and Enable Tree view with properties in C#.
My question is
hide some specific lists from that tree view like Documents,
Workflow, Task List, Calender
Lists which are created default when we create a site.

How do i print out the keyboard viewer?

I use different languages and need to use the different special characters so am switching among different keyboard layouts frequently. I use the (on-screen) "Keyboard Viewer", but would like to print out the "Keyboard Viewer" for each language that I frequently use. I can't see how to do this other than with e.g. screen capture which is less than ideal. Does anybody know where there are e.g. images of each keyboard layout (including special characters you get by hitting "shift" etc.)?

TThis page will give you normal and shift
How to identify keyboard localizations - Apple Support
FFor the option and option plus shift levels, you will have to use screen capture

List out Inactive HANA view

Similar Messages

Maybe you are looking for