List PM orders and Service PR no. from them
Hi
is there any Tcode that displays the list of PM orders and the service PR no. generated from the associated order.
Dear,
U could use the T code IW49.Here u need to give Plant and control key(PM03) used in the order for the service and Service/PM Orders indicator should be ticked.Now execute the report and from the change lay out select the PR field.
regards
sunil
Similar Messages
-
Creation of Sales Order and Service Contract from Inbound IDOC
Hi Experts,
My requirement is to create a Sales Order as well as a Service Contract from one Inbound IDOC. I am getting the Inbound IDOC from a third Party. The message type is ORDERS and Basic Type is ORDERS02. How ever i am using an extension type IDOC which carries all the required data for Sales Order and Service Contract. My requirement is like, to create a Sales Order first.
I have created a Z FM which is attached to the Process Code and subsequently to the message type. Inside the FM i an calling FM 'IDOC_INPUT_ORDERS' for creation of Sales Order. After that i am changing the IDOC data for the Document Type. I am changing the document type which is responsible for Contract Creation.
Then I am again calling the FM 'IDOC_INPUT_ORDERS' for creation of Contract with the help of IDOC data. But here the Contract is not getting created. It's getting failed during the Batch input session.
I need to solve this problem as soon as possible. Please help me. If there are any other options also please share.
Thanks in Advance.
Regards,
PriyabrataActually there is problem with BDCDATA. Inside the FM it's calling transaction with help of BDCDATA. If i am creating a Sales order or contract alone its creating successfully. But when i am trying to create both, it's retuning sy-subrc '1001' after calling the transaction on the second attempt. Is there any problem with BDCDATA like we can't handle with less time gap? Please help and give your inputs.
Regards,
Priyabrata -
Problem with sales order and Service order
Dear Guru's
We have a real problem with sales orders and service orders and how we treat these. For a project that uses a WBS, it's not a problem to manipulate SAP to give us a list of shortages (orders with no or limited supply) for each order, but for some reason our after sales orders and our service orders do not work this way.
Thanks and Regards,
Deethya.CLOSED
-
Pricing date for Service Order and Service Confirmation
Hi,
I cretated a Service Confirmation as followup for Service Order.
Client is asking "Pricing Date" should be same Same in Service Order and Service Confirmation. But, I am not seeing any such field in the screen.
I need to check T&C field and Zone field. But, I am not seeing these fields also.
Can you please let me know, where can I find this fields. (In which assignment block).
Thanks,
Sandeep
Edited by: Sandeep Reddy on May 31, 2010 7:21 PMHi,
I think by PRICING DATE they mean BILLING DATE.
In date profile of SERVICE ORDER and SERVICE CONFIRMATION you assign the BILLING DATE date type (i think it is there in the standard itself- however just ensure it).
Or customize a PRINCING DATE date type in the DATE PROFILE of SERVICE ORDER and CONFIRMATION and copy the date set in SERVICE ORDER to SERVICE CONFIRMATION.
This is one strategy you can use.
Regards
Surendra More -
Hallo
I have a question: Is the Adobe Creative Suite ordered and sent to me from the U.S. will be legal in Poland. Will I be able to do it legally projects in my Country.
Paullou,<br />>Is the Adobe Creative Suite 4 Design Premium user guide worth the 50.00 dollars?<br /><br />The exception would be if you don't mind spending the time using up a good portion of a toner cartridge, a ream or so of paper, a three-hole punch, and a thick binder or two to put it all together.<br /><br />And the result makes for some rather uncomfortable bathroom reading. Then again, you can always just print out the pages you need at the moment.<br /><br />Is buying the guide worth $50? Only you can decide.<br /><br />Neil <g>
-
List of tcodes and their purpose starting from SE71 to SE84
Can i get the list of tcodes and their purpose starting from SE71 to SE84.
hi,
u can find these details in table TSTC.
SE71 SAPMSSCF 1100 4 SAPscript form
SE72 SAPMSSCS 1100 4 SAPscript Styles
SE73 SAPMSSCO 500 4 SAPscript Font Maintenance
SE74 SAPMSSCU 1 4 SAPscript format conversion
SE75 SAPMSSCC 1 0 SAPscript Settings
SE75TTDTGC 2 SAPscript: Change standard symbols
SE75TTDTGD 2 SAPscript: Display standard symbols
SE76 SAPMSSCG 1100 0 SAPscript: Form Translation
SE77 SAPMSSCG 1200 0 SAPscript Styles Translation
SE78 SAPMSSCH 2000 0 Administration of Form Graphics
SE80 SAPMSEU0 2 Object Navigator
SE81 SAPMSEU10 1000 84 Application Hierarchy
SE82 SAPMSEU9 1000 84 Application Hierarchy
SE83 2 Reuse Library
SE83_START RLB_BROWSER_START 1000 80 Start Reuse Library
SE84 RS_INFOSYSTEM_START 1000 84 R/3 Repository Information System
reward points if hlpful. -
Datasource for Maintanance Order and Service Activity
Dear Experts,
I have a requirement to create report to show cost of services used in Maintanance order.
For the same I want a datasource which gives Maintanance Order and Services against each Maintanance Order.
Can anyone tell me which standard datasource I can use for the same?
Regards,
Nirav Shah
Edited by: Nirav Shah on Apr 6, 2009 8:55 AM
Edited by: Nirav Shah on Apr 6, 2009 10:45 AMHi,
depends on the settings in Source System.
Usually you can gen structural information out of the LIS extractors 2LIS_18*.
In most cases the costs ar processed in CO-Overhead-Management.
Check Extractor 0CO_OM_OPA_6 with CO-Number (0COORDER) = Number of Service-Document.
If you get all required data by this depends on the settings in Source System.
Probably you've got other CO-Applications (Like ABC or WBS). Then check in these Applcations for other extractors.
hth
Cheers
Sven -
Difference between sales order and service order?
Hi Gurus
Whatu2019s the Difference between sales order and service order?
Thanks.
KumarCheck below help link for defination and difference in Sales and Service order.
http://help.sap.com/saphelp_crm70/helpdata/en/17/99fb62928c46c28c10f3ebc52fdfa8/frameset.htm
http://help.sap.com/saphelp_crm70/helpdata/en/ce/6874bcf29742c395c5e5fae19a0c68/frameset.htm -
Difference between Project call off order and Service order
Hi,can anyone please explain to me the
Difference between Project call off order and Service order
Thanks,
SSHi SS.
Please post your query to Project System (PS forum for getting quicker answers.
/community [original link is broken]
Yuo may please close this thread.
Regards
Datta -
Plant Maintenance order and service order
Hi ,
Please let me know When we come Plant Main order and Service order.
Thankshi:
Customer Service is linked to Plant Maintenance module of SAP. Technically speaking SM/CS isn't a module. Primarily it uses parts of the PM and SD modules.
The PM module is used mainly for eqiopment, functional location, order, notifications, maintenance plans, etc (same as PM).
The SD module is used for billing, contracts, sales orders, etc.
The main interface between the PM and SD module is called Resource Related Billing (DP80, DP90, etc).
The Customer Service have a lot of process one of them is:
Create the notification IW51 -> create de Service Order -> create Quotation DP80 -> Modification Service Order IW32 Accept the Quotation once accept the system create automatic the sales order to copy of quotation -> and billing the sales order VF01.
Other process is:
Create the Notification IW51 -> create de Sales order -> and billing the sales order VF01.
Other Process is:
Create the notification IW51 -> create de Service Order -> create the sales order DP90 -> and billing the sales order VF01.
Other Process is:
Create a contract type WV VA41 -> create de Service Order -> create the sales order DP90 -> and billing the sales order or contract VF01.
Or
Create a sales order RA or RAS VA02 -> create de Service Order -> create the sales order DP90 -> and billing the sales order or contract VF01
Regards
Shashi -
My MacBook w/ OSX 10.6.8 cannot access my external Time Machine Backup USB Drive. It says it is a Read Only drive. When I went to change permissions I found all pernissions were listed as "Custom" and I could not reset them to "Read Write". Any help would be appreciated.
This can be done easily with ethernet.
Please follow the instructions strictly.
To make it easier I want you to do this overnight so you can turn off all your current connection to the internet.
Just go to the airport fan in to the top right and turn airport off.
Get ethernet cable and connect the laptop to the TC lan port.. ie <-> ones.
Press and hold the reset on the TC for about 10sec. until the front led flashes rapidly.
Open the airport utility.. go to manual setup and change the wireless to off. (so other people around you cannot join your network of one).
Ignore all the errors.. they won't stop the backup working.
Go to the TM and reselect the backup target disk as the TC.
It should start after 2min and run through to completion.
That is it.. for a backup of many GB it might take a few hours.. so make sure the laptop has power plugged in and the sleep is off.. (on early ones I think this is needed but I am a late arrival to the scene).. sleep doesn't affect later OS. -
DMS Object Link at Maintenence Order and Service order level
Hi SAP Gurus,
We had a requirement for maintaining DMS Object at Service order and maintenence order level, as Standard DMS does not provide any Standard Object link at Order level, we went for development and following the Standard procedure i could bring the Order Tab in CV01N Object Links, and also i could search the relavent maintenence order and maintain documents relevant to it,
But the biggest problem now is i could not create DIR from the Maintenence or service order screen IW31, and the document i have placed at the order is not visible in the order screen at all,
i know it is some sort of enhancement in the Order screen to allow DMS Documents to appear in the Order screen to provide this funtionality.
let me pls know what exactly has to be done, as there is no config at the order level to get the DMS Screen, as DMS is not a standard object at the order level.
one approch as suggested is modifiying the Order screen or using Screen Exit Enhancement for Order but not sure which one to use or how to move ahead,
Thanks n Regards
Priya SDear Christoph Hopf
Many Thanks for your answer,
i went through the said SAP Note, but it only speaks about the notifications level, where SAP itself has provided the standard DMS Object links, and iam in latest ECC-6 version where this note is taken care of i think,
iam looking for creating DMS Document (DIR) from the maintenence Order IW31 transaction screen, and have developed new Object link for Maintenence order,
but the main problem is, iam not able to create DIR from the IW31 Screen directly as Maintennce order is not a standard SAP Object,
please let me know how to get the list of documents that i have attached to a maintenence order to appear in the IW32 maintenence order screen, and also we need to create the documents (DIR) directly from IW31 / 32 screens.
Thanks and Regards,
PriyaS
Edited by: Priya S on Aug 19, 2009 1:50 AM
Edited by: Priya S on Aug 20, 2009 1:54 AM
Edited by: Priya S on Aug 24, 2009 6:24 PM -
Difference between Service order and service contract
Hi
Can any one plz differenciate the service contract and service order??
why only service contract products can carry object list entries and why not service products??
Thanks in advance.Appriciated with points.
Regards,
Nagi ReddyService Order:
A service order is a short-term agreement between service provider and service recipient, in which one-time services are ordered by the service recipient and resource-related billing performed upon completion. Such an order could be, for example, to maintain or repair some equipment, making it necessary to send a technician along with spare parts. These services are usually billed.
Service Contracts:
Service contracts are outline agreements with business partners which define services offered for a particular period. You support service contracts by processing contract-based and planned services.
Service contracts represent long-term service agreements with customers in relation to the content and scope of services guaranteed within specific tolerance limits for certain parameters, for example, within a predefined timeframe.
I hope this helps -
Purchase order and service entry sheet
Hi
Is there a way to prohibit modifications on the position of services purchase order when the service entry sheet and the invoice were already entered for that position?
Thanks in advance for your help
Tomashi, thanks for your help, but the problem that i have is when the service entry sheet and the invoice are allready entered, the user change the value of the position and the service tab, so the user can enter services for more amounts. So its produce difference on the purchase order history between the values of LERF (WE) and the value of the purchase position. For example
Service Purchase order for 100 dollars.
Tab service: 2 units for 50 dollars
The user enter one service entry sheet for 50 and the invoice for 50 (lerf and WE= 50)
Then the user change the position of the purchase order and increase the value to 100 and modifies the service tab to 1 services for 100.
Then he enter one service for 100 and the corresponding invoice..........so the result is the following:
Service purchase position: 100
LERF-WE: 150
so the purchase order history is inconsistence.
For that reason i whant to know is there is a wat to prohibit modifications on the position of purchase order
Thanks in advnace for your help
Enzo -
Creation of service order and service notification
Hi guys,
Please any one help me how to create service order through service notification, and explain me the process.This is very urgent for me kindly help the same.
Reg
Eswar
[email protected]hi eshwar
you can create service order by using the service notification,
create service notification using IW54 after entering the details select the Service notification in the menu and select the service order create OR press the Order buttom ,and enter the order type you want to create
hope this will clear you
regards
thyagarajan
Maybe you are looking for
-
Cannot Install Itunes 10.2.1
I am so lost I can't even figure out how to reply to the correct one...You posted, "Find and run Windows Installer CleanUp utility. For win 7 you have to right click the install file and run it as an admin. Then you run Windows Installer CleanUp util
-
Tired of getting "Protocol layer was unable to send a message" - Update to 10.2
I'm extremly glad to report that RIM has finally resolved the ongoing "protocol layer" failure to send email from certain types of accounts. A while back they post this not working solution: KB33736 "Protocol layer was unable to send a message" when
-
I cannot log-in to accounts on other websites e.g. eBay, Amazon, for starters. I get messages that I need to turn on cookies. They are on and I can see the cookies in the cookie file but the programs are not making the connections and not finding the
-
How to connect ITunes to my IPhone 4S ?
I have a new Iphine 4S. I am trying to get my Itunes and phone to connect. When I downloaded Itunes all I get is the player screen. I do not get a screen that shows my Iphone connected. I have uninstalled and reinstalled ITunes 3 times and I get the
-
Updating CF 7.0.0 to CF 7.0.2 Server
I'm currently running CF 7.0.0 server. Can I still get it updated to CF 7.0.2? I could not find the update anywhere in this site. Please help me with this.