List the complete setup for a query in a report

Hi,
is there an easy way (ABAP report or something like that) to list the complete setup of a query. I mean, which filters are used in the general filter, which restricted key figures (with the applied restrictions), which formules (including the restricted key figures) etc.
Regards,
machiel

Hi Venkat Kodi,
If you want to use Jump Targets with R-R-I you have to explicitly create them using T.Code: RSBBS. Then select the Source Query /Source system / Target Report.
If you want to locate the Target Query already created for a particular query. In BEx Report, Right-Click and use Go to --> Target Query.
Hope this Helps,
Cheers,
Raj

Similar Messages

How to capture the execution plan for a query

HI All,
Can anyone please help me in finding out the command to capture the execution plan for a query.
Execution plan for select * from EMP where <Condtions>
it is getting executed successfully but i need to get the proper execution plan for the same.
Thanks

971830 wrote:
i want to know where execution plan gets generated??
in PMON of server process or in shared pool??
i know that optimixer create execution plan..It is stored in Library Cache (present inside Shared Pool ).
select * from v$sql_plan;An absolute beautiful white paper :
Refer this -- www.sagelogix.com/sagelogix/SearchResults/SAGE015052
Also -- http://www.toadworld.com/KNOWLEDGE/KnowledgeXpertforOracle/tabid/648/TopicID/XPVSP/Default.aspx
HTH
Ranit B.

Pre-fill the OLAP cache for a query on Data change event of infoprovider

Hi Gurus,
I have to pre-fill the OLAP cache for a query,which has bad performance.
I read a doc 'Periodic Jobs and Tasks in SAP BW'
which suggested sum steps to do this
i hav created the setting for Bex broadcasting for scheduling job Execution with data change in info provider
thereafter doc says "an event has to be raised in the process chain which loads the data to this InfoProvider.When the process chain executes the process u201CTrigger Event Data Change (for Broadcaster)u201D, an event is raised to inform the Broadcaster that the query can be filled in the OLAP cache."
how can this b done please provide with sum proper steps
Answers are always appreciated.
Thanks.

Hi
U need to create a process chain or use the existing process chain which you are using to load your current solution, just add event change process type in the process chian and inside it add the info provider which are going to be affected.
Once you are done with this go to the broadcaster and create new setting for that query...you will see the option for event data chainge in infoprovider just choose that and create the settings.
hope it helps

I am trying to confirm the time at which a particular backup occurred using an external hard drive that I have since misplaced. Although time machine lists the backup times for some backups, it does not list them for all. Can someone help?

I am trying to confirm the time at which a particular backup occurred using an external hard drive that I have since misplaced. Although time machine lists the backup times for some backups, it does not list them for all, including the one in question. Can someone help?

Okay, I've sussed it. I saw a link to another discussion that hadn't turned up in any of my searches before I posted the question above.
My Tosh HDD was formatted to FAT 32 and therefore would not be backed up by Time Machine. I removed all data from it - nightmare as I hadn't enough space to put it on the macbook HDD, but, after trawling through numerous photos and deleting rubbish for hours, I finally made enough space and copied all data across. Then, after clearing the data from the Tosh HDD, I used disk utilitity to reformat it to Mackintosh OS Extended. Chose the option without kournalling because I'm not baking up onto this disk and so don't need it - according to some other discussions I found.
When it was done I check on time machine in system prefs and once I selected options, I was able to remove it from the excluded from backups list. Hey presto. Now I'm moving my photo library and my music library onto the Tosh HDD and my macbook should start to breath again. Hurray.

I am already customer and want to upgrade and take the offer of $29.99/month for the complete CS for existing customers (which I qualify for) but when I try 'BUY' - it keeps sending me to this forum?? How do I get the $29.99/month deal?

I am already customer and want to upgrade and take the offer of $29.99/month for the complete CS for existing customers (which I qualify for) but when I try 'BUY' - it keeps sending me to this forum?? How do I get the $29.99/month deal?

Hi Bev,
Thanks for the the email - I understand now.
I would just like to ask another question with regards to my new order for complete Creative Cloud which you suggested. I have now pre-paid for a full year but I’m not
sure when I can start downloading the other APPS as they don’t seem to be updating on my current Creative Cloud account app display. It still shows my old configuration
of products (i.e. Photoshop etc) and my ‘activity stream’ relates back to 9 days ago.
Please let me know how to get my new order activated.
Thanks
Kevin Bartley
[personal information removed... Mod - https://forums.adobe.com/docs/DOC-3731]
[This is an open forum, not Adobe support, please do not post personal information]
[If you are posting using email, please turn your 'sig file' function OFF for posting]

Information about the default setup for the demo user

Hi,
Can anyone guide me the properties which we have to set for the below
# Information about the default setup for the demo user.
db.adminUser=system
db.demoUser=FOD
db.demoUser.password=fusion
db.demoUser.tablespace=USERS
db.demoUser.tempTablespace=TEMP
And what exactly they represent
Regards,
Krishna

Krishna,
It's pretty obvious...
db.adminUser = the username of a dba user in your database
db.demoUser = the username of the demo user that will get created
db.demoUser.password = the password that will be used for the demo user
db.demoUser.tablespace = the default tablespace for the demo user
db.demoUser.tempTablespace = the default temporary tablespace for the demo user
You don't have to change any of them.
John

How to analyse the time taken for a query

Hey gurus ,
How to find the time taken for a query to execute .
Regards,
Venkatesh

Hi,
Time taken to execute a query = FRONT END TIME + OLAP TIME + DB TIME.
front end time is time taken to do format in BEX.
olap time is time taken to aggegate data in OLAP buffer.
db time is tme taken to collect data at data target.
to fine all these information
goto RSRT -> give query name -> execute+debug -> it will display all the fields > check fields what ever u want.
Regards,
Haritha.

My itunes won't show the complete page for the license agreement page

i just got a new ipod nano and like my itunes won't show the complete page for the license agreement page. I can see like two thirds of the page but can't see the rest so i can't agree to the license agreement. Advice please

You need to set your screen resolution to 1024x768 on this screen
Start > Control Panel > Display > Settings tab

Just bought a 3TB Time Capsule for a small office. Will have 4 users with MacBooks. What would ne the best setup for time machine individual backups and internet sharing in a secure way?

Just bought a 3TB Time Capsule for a small office. Will have 4 users with MacBooks. What would ne the best setup for time machine individual backups and internet sharing in a secure way?

Set up each Mac for Time Machine backups in the normal way. Time Machine will keep each backup separate on the Time Capsule, so users will only be able to see the backups of their own Mac.
Yes....there are convoluted workarounds that might allow one user to see the backups of another.....IF...they know the administrator password of the "other" Mac.
As far as Internet sharing, all users will have access to the Internet if they have a wired or wireless connection. If a Mac connects using wireless, it is possible to limit the time that they are allowed to connect to the network.
For example, you might limit the ability to connect to the wireless from say each Weekday from 8 AM to 6 PM.
With a wired Ethernet connection, you cannot limit access times to the Internet.

To the purchase of the complete offer "for clients CS" it does not recognize my number of series.as acount it recognizes to me but it does not make to make the purchase me. you can help me?

to the purchase of the complete offer “for clients CS” it does not recognize my number of series.as acount it recognizes to me but it does not make to make the purchase me. you can help me?

Hi there,
This offer is only available to customers who own a Creative Suite edition or individual product in one of the following versions (CS3.x, CS4, or CS5.x, or CS6), This offer is not available to Education, OEM, or volume licensing customers.
See T&C here - http://www.adobe.com/offer-terms/cc_complete_offer.html
^Ani

Bought an app one month ago. Now it demands that I repay the subscription fee for it. Tried to report problems on iTunes and just get referred back to Apple Support website. What do I do?

Bought an app one month ago. Now it demands that I repay the subscription fee for it. Tried to report problems on iTunes and just get referred back to Apple Support website. What do I do?

Micromedex Drug Interactions. The app itself is free. A one year subscription costs $9.99. It worked fine for a month. THen an "update" was automatically installed and it now demands a new $9.99 payment. Thank you.

Could anyone provide the complete manual of SAP Query Creation

Hi,
Now I am learning to create SAP Query.
I viewed many questions and answers about SAP Query.
Some mentioned this,and some did that...
Could anyone provide a complete manual of SAP Query Creation for developers.
I can create SAP Queries step by step with it.

http://help.sap.com/saphelp_46c/helpdata/en/35/26b413afab52b9e10000009b38f974/content.htm
http://www.thespot4sap.com/Articles/SAP_ABAP_Queries_Introduction.asp
Step-by-step guide for creating ABAP query
http://www.sappoint.com/abap/ab4query.pdf
ABAP query is mostly used by functional consultants.
SAP Query
Purpose
The SAP Query application is used to create lists not already contained in the SAP standard system. It has been designed for users with little or no knowledge of the SAP programming language ABAP. SAP Query offers users a broad range of ways to define reporting programs and create different types of reports such as basic lists, statistics, and ranked lists.
Features
SAP Query's range of functions corresponds to the classical reporting functions available in the system. Requirements in this area such as list, statistic, or ranked list creation can be met using queries.
All the data required by users for their lists can be selected from any SAP table created by the customer.
To define a report, you first have to enter individual texts, such as titles, and select the fields and options which determine the report layout. Then you can edit list display in WYSIWYG mode whenever you want using drag and drop and the other toolbox functions available.
ABAP Query, as far as I Believe, is the use of select statements in the ABAP Programming. This needs a knowledge of Open SQL commands like Select,UPdtae, Modify etc. This has to be done only by someone who has a little bit of ABAP experience.
To sum up, SAP queries are readymade programs given by SAP, which the user can use making slight modification like the slection texts, the tables from which the data is to be retrieved and the format in which the data is to be displayed.ABAP queries become imperative when there is no such SAP query existing and also when there is a lot of customizing involved to use a SAP Query directly
use either SQ02 ans SQ01
or SQVI tr code
for more information please go thru this url:
http://www.thespot4sap.com/Articles/SAP_ABAP_Queries_Create_The_Query.asp
http://goldenink.com/abap/sap_query.html
Please check this PDF document (starting page 352) perhaps it will help u.
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVQUE/BCSRVQUE.pdf
check the below link will be helpful for u
Tutorial on SQVI
once you create query system generates a report starting with AQZZ/SAPQUERY/ABAGENCY2======= assing this report to tr code for the same
useful
http://www.erpgenie.com/abap/code/abap47.htm
regards,
Prabhu
reward if it is helpful

How to list the Cert Issuer for all servers in a Domain

Hello,
The objective is to list the Server name and Cert Issuer for any Cert found in the LocalMachine\My store on all servers in a Domain.
Once I'd get to a server, probably by PS remoting, I'd issue the following:
dir cert:\localmachine\my -recurse | ? Issuer -like '*'
However, the output is Thumbprint and Subject, but I really need to see the Issuer, or what is displayed in the Certificates MMC under the 'Issued By' column. What I need in my output is the following:
ComputerName       Issuer
Srv1                       Acme Cert Auth
Srv2                       Host1.Acme.Com
Any suggestions would be appreciated.
Thanks for your help! SdeDot

As you might suspect it is even easier than that:
$omputers |
ForEach-Object{
invoke-command -ComputerName $_ -ScriptBlock {dir cert:\localmachine\my -recurse}
} |
select PSComputerName, Issuer
¯\_(ツ)_/¯
Indeed.
=]
Both work great!
Thanks for the response and help Mike and Jrv!
Thanks for your help! SdeDot
Cheers, you're very welcome.
Don't retire TechNet! -
(Don't give up yet - 13,225+ strong and growing)

Results showing the same output for any query execution

Guru's
Whenever user selects query in RSRT --> and click on java view it is prompting for user ID and password. After giving the login credentials, the out put remains the same for any query query as input. Please let me know how can we fix this? THis is occuring for only one user. Even I tried copying the user to a new user. THe new user is not facing this problem.
Regards,
Suresh

try clearing the portal cache then try it. ask somebody else to log in and try it, could be authorization.

Where is the complete configuration for catos4000 switch?

thank you!

Hi Friend,
Here is the complete configuration guide for catos 4k switch
For release 7.x
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat4000/rel7_1/config/index.htm
Complete details about 4k switch with command reference
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat4000/rel7_1/index.htm
HTH
Ankur

List the complete setup for a query in a report

Similar Messages

Maybe you are looking for