"List updated" screen on my iPhone and asking me to Accept or Cancel. Does anyone get this?

Has anyone ever got this screen on their iphone before? I get it occasionally but have no idea what's causing it.

Hmm interesting theory...I do press undo a lot, but only because I'm trying to get a good-looking brushstroke down, usually I don't even actively lock a layer as a step during my session because they've already been locked previously and I don't need to lock/unlock them often. The thing that is frustrating is that I will try to make a stroke, and can't because the symbol pops up...then I'll make the exact same intended stroke again and then it will work fine. It's pretty haphazard but basically every other stroke or every few strokes, it'll pop up.
I think I'm beginning to almost accept this rhythm in my workflow
I'm using CS6, and I noticed that I don't have this problem when I bring the file to work on at my job (CS5) or at school (CC).
Edit: I tried to test your theory by drawing as much as I could without pressing undo...I was pleasantly surprised to not run into any issues with the paintbrush, but sure enough, as soon as I switched from the paint brush to the eraser, and tried to erase something I just drew, the eraser popped up with the "prohibited" symbol.

Similar Messages

  • Sold my Iphone 5. THe person who brought it has an Irish simcard and so it wont accept it. Does anyone know what I need to do to get it open to the Irish simcard?

    I purchased and Iphone 5 directly from apple, sim free over 12 months ago now. I have been using the phone on Vodafone with no issues. I have now upgraded to the Iphone 6 and therefore sold on the Iphone to a friend of mine. He lives in Ireland and therefore has a Vodafone Ireland simcard. Given that the phone was brought sim free from Apple directly, we didn't foresee that this would be an issue. However, when he goes to activate the phone, this message appears;
    The SIM card inserted in the iPhone does not appear to be supported.
    The SIM card that you currently have installed in  this iPhone is from a carrier that is not supported under the activation policy that is currently assigned by the activation server. This is not a hardware issue with the iPhone. Please insert another SIM card from a supported carrier or request that this iPhone be unlocked by your carrier. Please contact Apple for more information.
    Does anyone know what I need to do? I have got onto Vodafone, and they have been useless!! Apple say the phone is out of the 12 month warranty and therefore want to charge £25 before they will even speak to me about it. I requested an NUC from Vodafone, however, they are saying they need a proof of purchase from Apple as I did not buy the phone from them. I do not have my receipt anymore as the purchase was over 12 months ago now.
    Any advice much appreciated.
    Thanks,
    Phill

    Now you have discovered that a sim free phone and an unlocked phone are NOT the same thing.  Had you purchased an unlocked phone from Apple, then you would not have had problems and as it is, a sim free phone is not the same and sim free will lock to the first sim card that you insert into the phone, so effectively, you phone has been locked to Vodafone and this is why you now have problems.
    If your phone is locked to Vodafone, then they are the only ones who can unlock the phone for you - Apple does not and cannot unlock phone - this is the province of the carriers only.
    You had the contract with Vodafone when you used the phone and so you need to keep on at them to unlock the phone for you.  If they still require proof of purchase and you cannot give them this and they will not unlock the phone for you, then this phone is useless to the friend that you sold it to - he will never be able to use it and basically, you are looking at giving him a refund for the phone for the amount that he paid you for it.
    You need to keep on at Vodafone to unlock the phone for you or give your friend a refund for the phone as it will be useless to him and he will never be able to use the phone.
    Hope that you now understand that a SIM Free phone and an Unlocked phone are NOT the same and I hope that when you purchased your iPhone 6, that you bought an unlocked phone?

  • The screen is locked on and off center toggle switch is off does anyone have any suggestions

    My older ipod shuffle is locked on and the screeis a little off center I've tried most all of the common solutions . Has anyone experienced this problem?

    When you say the only tool available was to restart... do you mean Disk Utility wasn't there?
    "Try Disk Utility
    1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
    2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at the top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
    Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
    3. Click the First Aid tab.
    4. Select your Mac OS X volume.
    5. Click Repair. Disk Utility checks and repairs the disk."
    http://docs.info.apple.com/article.html?artnum=106214
    Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
    (Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
    I also tried safe booting and holding down the options key..
    Shift key invokes a "Safe Boot", the Option key should bring up the Boot Options screen where available boot drives are shown.
    Do you have another Mac with Firewire around and does this one boot into FireWire target disk mode...
    http://support.apple.com/kb/HT1661
    If so this Mac will look like a big Firewire drive to the other one, and if the other one is the same OS or higher you can try Disk Utility on the other one to attempt repair of the iMac's drive.

  • TS3376 After the last update from find my iphone app i cant locate my device anymore does anyone have a solution im using ios 6.1.1! Thanks

    Just to add that everything worked just find before i updated the app,after the update i wasnt able to locate my device

    Try force closing the Find My iPhone app by double tapping the home button, locating Find My iPhone in the list at the bottom, tapping and holding it until it wiggles, tap to close it, then tap the home button again.

  • HT1688 I reset my Iphone and got everything back accept ringtones, how can I get them back?

    I recently reset my Iphone 4S 16 GB and I backed it up with Icloud. I got everything back ( apps, music, photos, ETC.) accept for my purchased ringtones. I am trying everything to get them back. I know they are still there because when I tried to purchase one again, it said I already purchased it. How can I get them back and what happened to them?  
                                                                                                                                                                 Thanks,

    I would try deleting these from your Itunes on your PC/Mac but i gather you have these ticked to sink when you plug in your iphone check this first. Then you could try downloading them again from itunes.
    You can download anything you have purchased again from I tunes by clicking on the purchased link the right hand side of itunes store link in. I have never had Ringtunes so i would make sure these are availble download before you delete. There are lots of good free apps with ringtunes and ones that enable you to simply cut a short sample from any of the tracks from your itunes list.

  • I tried getting the update for my new iphone and now it is asking me to activate it again but won't let me, how do I fix this?

    I tried getting the update for my new iphone and now it is asking me to activate it again but won't let me, how do I fix this? I had started using it for a few hours and tried getting the update and now it won't let me activate the phone. I also can't call the helpline because it won't let me leave this screen on the phone that says "Your iPhone could not be activated because the activation server is temporarily unavailable. Try connecting your iPhone to iTunes to activate it, or try again in a couple of minutes." What it says on iTunes after I fill out the activation info is "There was a problem activating your iPhone. Please contact Verizon Wireless at 1-800-922-0204 to have this iPhone added to your account. Click Continue to be able to explore its features and the App Store." Please help this is driving me nuts!

    iPhone User Guide
    http://manuals.info.apple.com/en_US/iphone_user_guide.pdf

  • TS3694 updating ios7 my iphone 4s has gone into restore mode and asking me to plug into itunes, im then getting an 3004 error. i have not been able to use my phone since doing this. can anyone help ?

    updating ios7 my iphone 4s has gone into restore mode and asking me to plug into itunes, im then getting an 3004 error. i have not been able to use my phone since doing this. can anyone help ?

    http://lmgtfy.com/?q=iPhone+error+code+3004

  • Why after update Iso 5 by iPhone and not open, without using Itune. Just screen keep show apple logo for few hours already.

    Why after update Iso 5 by iPhone and not open, without using Itune. Just screen keep show apple logo for few hours already.

    Try to reset - Press both the home and on/off buttons for at least 10 seconds until the Apple logo reappears.

  • After forgetting the password for my iPhone, I am trying to restore it through iTunes, however, during the process, the phone keeps turning on and asking for the password, thus canceling the process. Any advice?

    After forgetting the password for my iPhone, I am trying to restore it through iTunes, however, during the process, the phone keeps turning on and asking for the password, thus canceling the process. Any advice?

    Yes, you will still get the prompt.
    I meant reset then try the recovery mode restore again.
    You can also try DFU Mode.
    DFU (Device Firmware Update) Mode is different than Recovery Mode.
    DFU Mode is a special mode where the device can still interface with iTunes, yet it does not load the iBoot bootloader.
    DFU Mode:
    Plug your device into your computer.
    Turn off the device.
    Hold the Power button for 3 seconds
    Hold the Home button without releasing the Power button for 10 seconds
    Release the Power Button but keep holding the Home button
    Keep holding the Home button until you are alerted by iTunes saying that it has detected a device in Recovery Mode
          NOTE: Make sure the device screen is blank and no logos are present. Be patient, it make take several trys.

  • Site list update not working with TED and Zenworks for Servers

    Product: Zenworks for Desktops 7Sp1 and Zenworks For Server/TED 7Sp1HP5
    Subject: Site list update not working with TED and Zenworks for Servers ,
    all on Linux
    Description: We have an exiting environment with 6 ZfS Servers and now we
    brought up a new Server for another location. I configured all same as on
    the other Server and the new one created all NAL-Apps at the new location.
    But in the Application Site list on the golden App is this Application
    missing. So I clicked on the Link up site list on the Distribution Screen
    in C1. On ApplicationSite list the App from the new location is missing.
    So I removed all and added the new from the new location and now i see all
    in the application site list.When I install an app on the client on the
    new location NAL is connecting alway th the same (wrong location-server
    and i get an msi error 1612 or id=53272 with path=\Wrong serverpath to
    file.
    I looked on the other tab on C1 at the golden app an I see the backlinks
    are going to all other servers without the new one. Software installation
    on other locations are ok
    Regards

    Andreas,
    I forgot to mention that you can also set the loging level on the Distributor and the Subscriber to 6. to do this at the Zenworks Server Management prompt type "setconsolelevel 6" if you want to capture this to the log file ted.log then use "setfilelevel 6"
    Next delete the Distribution from the Subscriber and then re-push the channel.
    What we are looking for here in the log is the creation of the object and the linking information about the gold object. it should look like this (not the failure part ;-))) )
    In this excerpt you will see the entry
    Golden App =
    This should be were the link is to
    You can check this both ways in the Golden App and in the Distributed Application.
    Here is a log from me that shows this info as an example of what you should be looking for.
    2008.05.29 03:35:41 [TED:Work Order In(yourserver.yes.com)] Receiving distribution: Creating new application failed,
    Subscriber Tree Name= YOUR-TREE,
    Subscriber DN = SUBSCRIBER_YOURSERVER.BRN.FL.SUBS.SUBSCRIBERS.ZSM. GRS.CBH,
    Golden App = SCRIPT-MS-HOTFIX.APP.BRN.ZENGOLD.GRS.CBH,
    Attempted AppName = SCRIPT-MS-HOTFIX.APP.BRN.HAVERHI.PALM.FL.CBH,
    error message: Failed creating SCRIPT-MS-HOTFIX.APP.BRN.HAVERHI.PALM.FL.CBH. With error message: Setting the trustee for BRN.HAVERHI.PALM.FL.CBH on the file "VOL1:\ZEN\UTILS" failed. Look in subscriber log file for more details..
    2008.05.29 03:35:41 [TED:Event Processing] Handle Event: Work order IN completed... Creating new application failed,
    Subscriber Tree Name= YOUR-TREE,
    Subscriber DN = SUBSCRIBER_HAVERHI-FLBRN1.BRN.FL.SUBS.SUBSCRIBERS.ZSM.GRS.CBH,
    Golden App = SCRIPT-MS-HOTFIX.APP.BRN.ZENGOLD.GRS.CBH,
    Attempted AppName = SCRIPT-MS-HOTFIX.APP.BRN.HAVERHI.PALM.FL.CBH,
    error message: Failed creating SCRIPT-MS-HOTFIX.APP.BRN.HAVERHI.PALM.FL.CBH. With error message: Setting the trustee for BRN.HAVERHI.PALM.FL.CBH on the file "VOL1:\ZEN\UTILS" failed. Look in subscriber log file for more details..
    2008.05.29 03:35:41 [TED:Event Processing] Received (from haverhi-flbrn1.yesbank.com) Creating new application failed,
    Subscriber Tree Name= YOUR-TREE,
    Subscriber DN = SUBSCRIBER_HAVERHI-FLBRN1.BRN.FL.SUBS.SUBSCRIBERS.ZSM.GRS.CBH,
    Golden App = SCRIPT-MS-HOTFIX.APP.BRN.ZENGOLD.GRS.CBH,
    Attempted AppName = SCRIPT-MS-HOTFIX.APP.BRN.HAVERHI.PALM.FL.CBH,
    error message: Failed creating SCRIPT-MS-HOTFIX.APP.BRN.HAVERHI.PALM.FL.CBH. With error message: Setting the trustee for BRN.HAVERHI.PALM.FL.CBH on the file "VOL1:\ZEN\UTILS" failed. Look in subscriber log file for more details..

  • HT4972 I recently updated my iPHone to iOS5 and I worked o.k. Then I updated my wife's iPhone and instead of reloading all her data, it loaded my data: pictures, phone numbers, etc.  Where is my wife's data and how do I re-load to her iPhone?

    I recently updated my iPhone to iOS5 and it worked o.k.  Then I updated my wife's iPhone and it loaded all my data (pictures, phone numbers, etc.) to her phone.  All her data is gone.  Is there a way that we can re-load her data?

    If there is a backup somewhere that had her data you can restore that backup.  Otherwise, all her data has been overwritten by yours.

  • I updated my iphone and all my contacts were deleted, how can i get them back?

    i updated my iphone and all my contacts were deleted, how can i get them back?

    like roaminggnome said you should see your contacts again once you sync with iTunes. if you used iCloud before, make sure contact sync is turned on and your contacts should be back.

  • IPhone home screen is zoomed in and will not zoom out. How do I get it back to normal?

    My iPhone 6 home screen is zoomed in and will not return to normal, How do I get it back to normal?

    If that did not work, then try triple-tapping the home button. If that does not work, then double-tap 3 fingers and hold on the screen, dragging to change the zoom level. If you need to move the screen around to be able to access something to get the device unlocked, then use 3 fingers to drag the screen around after trying to change the zoom level.

  • I cannot update my sync my iphone and macbook it keeps saying I need to download OS X v10.6 or better.  I cannot figure out how to do it.

    I cannot update my sync my iphone and macbook it keeps saying I need to download OS X v10.6 or better.  I cannot figure out how to do it.

    The 10.6 Snow Leopard DVD is back in the Apple online store. You can get it for $19.99. You will need to be running 10.6 to access the App Store. http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard

  • After updating to iOS8 my iPhone and iPads no longer autofill name and passwords

    After updating to iOS8 my iPhone and iPads no longer autofill name and passwords
    It worked fine in iOS7, it still works fine on an older iPhone 4 running 7 and an iPad Air also running 7. Also my Macs, an old MacPro 10.7.5 and a MacBook Air 10.9.5 work great, autofilling every time.
    This is what Safari settings look like:
    All the password info is still there under Saved Passwords.
    I have tried turning Names and passwords off and on but no luck
    What should I do?

    I can get autofill to work but it will only remember my last username and password used for the site rather then letting me start typing a username and then suggesting one and its password being automatically filled in if I hit space while the suggested username was showing or when i finished typing the username (how it worked in iOS 7). I'm having zero issues using iCloud keychain on my MacBook pro running Yosemite so I'm not sure if apple accidentally removed this functionality or if there is something I can do to get it back? I have keychain turned on as well as autofill passwords and when I go into the settings I can see all the accounts and passwords for this particular site so I know they're saved..very odd behavior. If no fix I'll just start adding them all to one password but this seems cumbersome considering safari has this feature built in.

Maybe you are looking for