List view in agentry

Hi,
I have a requirement where on click of a button there should be a screen which displays list of values. On selecting any of the value and clicking on Ok button this value should be stored. Now on click of an other button a transaction will be triggered which should get the stored value and send to backend.
I used the following approach:
An edit transaction screen which displays list view. On selecting a value im unable to store this value.
Can someone suggest me a solution.

Madhuri,
Don't use a list view on a transaction, instead just navigate to a screenset, either a detail screen with a list view or list tile view, or a traditional list screen. Display your data on the list and add a button on the buttons tab for the screen. The target for the button will be "Currently selected WHatever object" if on a list screen, or you will need to point to the screen field itself if using a list view or list tile view: "Current screenset -> Current Screen -> List View Control -> Currently Selected Whatever object". Tie an action to that button that accepts a Whatever object as the type and runs an edit transaction with no screen. Set the target of the action's transaction step to Main Object. The transaction should edit the main object. Add a string property or multiple properties in the main object and the transaction to store the temporary data from the selected row. Initial value for any properties in the transaction should be "From other object", then other object will then be "Whatever object -> Whatever property". Set each property individually to point at the correct property in your Whatever object. The Whatever object you have selected on the list will be used since we passed it to this action. Then remember to Apply the data at the bottom of your action. Pressing the button will now store the temporary data in the main object. If you want another button to send the data to the backend, create another action and transaction that again edits the main object. Include all the properties you want to send up in the transaction, then attach an update step to the transaction that will process things on the backend. There is a check-box on the transaction called "Discard Null - Discard transaction if data has not changed". You will need to uncheck this or the transaction will not get saved, since we didn't change any data here. Again, don't forget to apply the data with an apply step.
Jason Latko - Senior Product Developer at SAP

Similar Messages

List View in iPad Platform in Agentry

Hi,
In EquipmentView Screen Set there is a MeasuringPointsView_iPad Detail Screen. This screen has a List Tile View. The properties for this view has Selected screen set as MeasuringPointTileSelected. I created a field of List View in MeasuringPointTileSelected_iPad screen.
When im trying to view the screen in iPad its throwing an error: “Invalid Control Type for a list tile”. I created the same field in Windows platform screen and it was working fine.
Can someone guide me in resolving this issue.
Thanks

Madhuri,
I have tried the way you mentioned by using non-sap(MSSQL) bakend with ipad platform.It is working fine for me when i have tested the app in ATE.
Once try to cross check with my procedure once.
1.I have three objects Customer,orders,products.Orders object is collection to customer,Product Object is collection to orders.
2.I have defined 'show order tile' screen set for order object with one detail screen that contains order id and customer id.
3.Defined another screen set 'show order tile selected' for order object This details screen contains all the fields in the order object.Now i have defined as mentioned by you a field with edit type as 'list view'-->check whether all the settings are done correctly in this field->height(20),collection(In my example Products),List view columns(Product Name)->that means the list view will display all the product names of the selected order object.
4.Go to 'show customer details screen set' ,define a detail screen,add a field with edit type as 'list tile view'->set the collection to orders,list tile view settings->screensets->row ->show order tile screen set
selected ->show order tile selected screen set
5.Publish and test in ATE.For your understanding iam inserting the screen shot that i have done.
Please try to map the screen sets and objects in my example.....Hope this may be a bit helpful for you.
Regards,
Sravanthi Polu

Agentry: Edit Property from List View when scanning

Hallo,
i have a detail screen with a list view. The List View shows a collection with orders. The order properties are orderNumber, orderStatus and some other details. In the List View i create a single match action for the list view scanner. The property column orderNumber is set to scanner can filter on this column. So if i scan a orderNumber from the List View my match action starts.
In the action i want to set the orderStatus from the matched order to a new status. Example: i scan the order with orderNumber 001 and his orderStatus is "new". Then the orderStatus should set to "in process".
I try to create a SubActionStep for the single match action that have a transaction step and a apply step. In the transaction step i want set the orderStatus object. But i don't know how i can set a new value to the orderStatus property.
Please help me with this.
André
PS: my TransactionStep:
and my transaction:

André,
In your transaction you will need to also have a property that maps to the Object -> OrderStatus property. For the initial value of the property you will select Rule - Before Data Entry and then create your rule to return what the status should be set to when the transaction runs.
Then when you Apply the transaction in your Scan Match action the value will be updated on the client. If you also want to update the status in the Backend system you will also need an Update rule as Emanuel mentions to change the status of the Order in the backend system.
Hope this helps!
--Bill

Using scanner in list view on android

Hi,
we are using Intermec CN51 with Android 4.2.2 and agentry in version 6.1.4.179 on both server and client.
Now when I try using the Single Match Action in a list view field with the intermec scanner, nothing happens.
The only thing the scanner works for, are input fields but only when they are focused.
The scanner software has to settings
1. Internal Scanner (if off the scanner doesn't react at all)
2. Virtual Wedge (if off no values are stored in the input fields)
Why do the Match actions not working? Is there any solution for this problem?
I hope someone can help
Thanks
Thomas

Thomas,
By Intermec scanner do you mean some kind of laser scanner or are you referring to the camera scanning?
The Android client only supports Camera scanning. You click the barcode button and it opens a camera window to capture a barcode as an image and automatically "read" the value.
It sounds like you are trying to use some other scanner interface which is not supported at this time. The reason it works for input fields is when you turn on the Virtual Wedge interface and scan a value the device sends the resulting value as if you typed it on the keyboard. If you have an input field open that value will then appear as if you typed it in yourself.
--Bill

Printing list view in ical

I use mail and ical for everything now. Everything is fine except When I want to print the "list view" which shows my “to dos”. It displays the URL the “do to” is attached to in mail. I use notes often in mail and enter to dos in the notes so they will have URL links. The link only becomes a nuisance when I want to print, otherwise it’s very useful.
Why would the long URL paths display when in print view???!!!!! It doesn’t make any sense.
Is there anything I can do?
Thank you

ecernek,
There is no event list option on iCal like the one on the iPhone.
That number means that you have an event invitation. Use iCal>View>Show Notifications to choose what to do with the notification.

Event List view in iCal?

I would love to have an Event List view in iCal like I do on the calendar on my iPhone. Is there such a thing? The particular reason for wanting it (this time) is that one of the calendars in the ON MY MAC list has a number in a oval to the right.
I believe this is trying to tell me that there is a new event that I need to do something about. Problem is, I don't know where to find it.

ecernek,
There is no event list option on iCal like the one on the iPhone.
That number means that you have an event invitation. Use iCal>View>Show Notifications to choose what to do with the notification.

List view in iCal on my iPod touch is corrupted

The 'list view' seems to be all wonky in Calendar on my iPod touch.
The dates for a given day that's displayed don't make sense:
i.e. Sunday Oct. 27 2030 followed by Saturday July 14 2001 followed by Tuesday Jan. 16 2001 are listed in consecutive order instead of today, tomorrow and next day (with correct dates).
Also, the 'events' given for each day listed don't make sense and are often duplicated.
The 'day' and 'month' views however, seem to be ok and not corrupted. The 'list' field in the month view also seems fine ?
Has anybody experienced this ? Very frustrating, since I like the list view.
I make most of my entries/changes to iCal on our main desktop (iMac 24") then sync. to my iPod. The list view seems ok on the desktop.
Any help greatly appreciated.
ps. not sure if the problem corresponded with an upgrade of the Ipod software to OS 3.1 from 2.x....

See this previous discussion:
FIX for iPod Touch Home Button: Apple Support Communities

Xtrafinder seems to have broken my 'list view' in Finder. Please Help.

I'm using 10.9.4.
I installed XtraFinder a couple of days ago and instantly my Finder didn't work in list view or column view
I can still use it in icon view but none of the others
I've attached an image as an example of what happens when I switch to list view from icon view. I have completely uninstalled Xtrafinder using its own uninstall method.

It's not really clear that you still have a problem, but if you think you do, see below.
1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can read it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\$[0-9]+\$\$.+\$/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|(Bo|PO).+ sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' s/, /\'$'\n''/g;p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test osascript\ -e );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get path of every login item'" 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:| VALI|xpma' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,Inter,iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 37 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

In Ical, can you print a list view calendar without notes?

In Ical, can you print a list view calendar without notes?

cj,
After selecting Calendar>File>Print...> I am presented with a Print selection pane which offers among other choices, a "List" selection:
What do you see?

What happened to list view in iCal? Sync broken?

Since turning on iCloud I can't find list view in iCal. Also, repeated sync with iTunes did not move new events from Mac iCal to iPhone.

The only way I have found to deal with the calendar is to click the search icon in the corner of the calendar window and you get a list view of each day. It's better than nothing

How to print list view of Finder window

I want to print a list of the contents of a disk or a folder, just as I see it in the Finder's list view. How is this done in Tiger? In some older versions of the OS there was a menu command for this operation, something called Print Directory, I think.

There may be more user-friendly ways of doing this, but here's one way:
Open Terminal (in the Utilities folder).
Use "cd" to change directory to the folder you want to print
eg cd /Users/myuser/Documents
Use "ls" to list the contents to a file
ls -al > filelist.txt
You can then open the filelist.txt file from Finder in TextEdit and print it.
Matt

Help ! The 'list view' for the Calendar app. on my Ipod touch is haywire..

The 'list view' seems to be all wonky in Calendar on my iPod touch.
The dates for a given day that's displayed don't make sense:
i.e. Sunday Oct. 27 2030 followed by Saturday July 14 2001 followed by Tuesday Jan. 16 2001 are listed in consecutive order instead of today, tomorrow and next day (with correct dates).
Also, the 'events' given for each day listed don't make sense and are often duplicated.
The 'day' and 'month' views however, seem to be ok and not corrupted. The 'list' field in the month view also seems fine ?
Has anybody experienced this ? Very frustrating, since I like the list view.
I make most of my entries/changes to iCal on our main desktop (iMac 24") then sync. to my iPod. The list view seems ok on the desktop.
Any help greatly appreciated.
ps. not sure if the problem corresponded with an upgrade of the Ipod software to OS 3.1 from 2.x....
ipod touch 16 GB 2nd generation iPhone OS 3.1 iPhone OS 3.1.1 (7C145)

Attach the iPod and launch iTunes.
Select it and goto Info tab / Advanced.
Try using the "replace..." option and sync to see if it places the good data on there.

All day events in iCal on 3Gs w/ iOS 4.0.2 show up day early in List view

For some reasons, all day events on my Calendar (iCal synced via MobileMe) are showing up a day earlier on my iPhone, but only when I use List view. They appear fine when I use iCal on my MBP or iMac. This happens with all day events on my calendars and subscribed calendars (e.g., birthdays).
If I tap on an event in the Day or Month view, the correct date is listed. If I tap on it in the List view, the day before is listed as the date.
What in the heck is going wrong here?

I am having the same problem. I have tried different scenarios and it looks like its an issue with syncing from MobileMe. I thought I had it beat when I saw my preferences for in iCal were set to to start at 8AM and end at 6PM. I made it Midnight to Midnight but that did not fix it.
I am perplexed - has to be a bug!
Message was edited by: RaoulDuke

How can I get a list view after selecting "see all"?

I just updated to iTunes 12. I've looked on the net for this but couldn't find anything on it.
Previously when I searched for something in the iTunes store I'd pick a certain category of media (podcasts, for example). It would give me the first few results and then I could select "see all." Then get a list view and sort it.
Now when I click on "see all" I get an album cover view. NOT a list view. And I have no way to sort the results. I usually sort by time.
What's odd is when I'm still on the initial page you get after making a search I *can* sort the results. But only the first 10.
Basically, I need a way to sort all of my search results by time. Either after selecting "see all" or having iTunes show many more than 10 results.
This was possible (and the default, I think) in previous versions. I've looked through every menu and I don't see a way to turn this functionality back on.
Thanks.

Hi,
There is no such PowerShell command can achiev this. Maybe you can use a script to get the user name with folder redirection enabled. However, I am not familiar with writing script, and it would be better for you to ask in script forum below for professional
assistance:
http://social.technet.microsoft.com/Forums/en-US/home?forum=ITCG&filter=alltypes&sort=lastpostdesc
Best Regards,
Mandy
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

List View in the event browser stopped working.

Recently I was using Final Cut pro X when it crashed, when I re-opened the application I found that List View in my event browser no longer displayed any content, filmstrip view appears to work but I had gotten quite fond of list view.
Is there a way to get it running again? I've already tried Restarting, shutting down and booting up again, taking out my external hard disk before opening FCPX then putting it back in again..

We have the same FCP X issue. Filmstrip view works, switch to List view and it shows nothing. We even tried closing in List view, then reopening, it reopens in Filmstrip. We have rebooted as well, with no effect. Anyone find a work around?

List view in agentry

Similar Messages

Maybe you are looking for