Listbox in screen painter

Hello Friends,
which is the better way to fill the values in the list box either by POV or set_vrm_values??
how to select multiple values from listbox ??
how to pass these values in the table control??
Pls suggest/comment
Regards,
Sunny

hi:
For POV
[POV|http://help.sap.com/saphelp_nw2004s/helpdata/en/9f/dbaac935c111d1829f0000e829fbfe/content.htm]
Regards
Shashi

Similar Messages

How to create a drop down box and text box in screen painter?

Hi i am totally new to this concept of screen painter..please can any tell me
how to create drop down box in screen painter?
How to create or display default date and time values?
How to create text box for giving comments?
How to store the records that we are entering in a table?
Please can any one send me the procedure for creating all these its very urgent useful information will be surely rewarded.

Hi,
Check all these.
1.how to create drop down box in screen painter?
To get Drop Drown Box on screen .
Follow these steps.
1.
Go to T.Code SE51 and Select Laypout for the Screen.
2.
Double click on the field for which u want Dropdown box.
3.
Then U will see Name ,Text ,DROPDOWN.Click on that and select List Box or ListBox with key . Better to to select first one.
4.
Save and Activate ur screen .
5.
Enter the following piece of code in the PBO of the screen.(Change for ur requirement).
6.
The following code should be written under PROCESS BEFORE EVENT in the MODULE.
TYPE-POOLS :vrm.
DATA:
i_natio TYPE vrm_values, "-->Table that is passed through FM vrm_set_values
w_natio LIKE LINE OF i_natio.
DATA:
BEGIN OF i_t005t OCCURS 0,
    land1 TYPE t005t-land1,
    natio TYPE t005t-natio,
END OF i_t005t.
IF i_t005t[] IS INITIAL.
SELECT land1 natio
     FROM t005t
       INTO TABLE i_t005t
   WHERE spras = sy-langu.
IF sy-subrc = 0.
LOOP AT i_t005t .
      w_natio-key = i_t005t-land1.
      w_natio-text = i_t005t-natio.
      APPEND w_natio TO i_natio.
      CLEAR w_natio.
ENDLOOP.
ENDIF.
ENDIF.
CALL FUNCTION 'VRM_SET_VALUES'
EXPORTING
                      id = 'I_IT0002-NATIO' "-->Field for which dropdown is needed.
                values = i_natio
EXCEPTIONS
   id_illegal_name = 1
            OTHERS = 2.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
2.1.How to create or display default date and time values?
1.
create input field for DATE and TIME on screen.ex. DATE1 and TIME1 are screen field names .
2.
Just assign SY-DATUM to DATE1 and SY-UZEIT to TIME1 under PROCESS BEFORE EVENT.
3.How to create text box for giving comments?
1.
Define one variable in the TOP include with type STRING means Global variable.
2.
Create one input field by giving screen field name which u have defined in the above step.
4.How to store the records that we are entering in a table?
For this case.. Create one table control. you can select one record and create record in the Z table by pressing button on Application toolbar..
Check the following steps to handle Table control.
1).
U should take one variable in your internal table or in structure which
is used for table control fields
ex :
data :
begin of itab occurs 0 ,
    mark type c , "This is to select the record.
    matnr like mara-matnr ,
    matkl like mara-matkl,
    maktx like makt-maktx,
end of itab .
Controls: TABC types TABLEVIEW using screen 100.
2).
This mark variable should be given in Table control properties.
follow the path
double click on the table control-->attributes .->select
w/SelColumn and in that itab-mark. Check in the figure.
[Table control properties screen|http://bp2.blogger.com/_O5f8iAlgdNQ/R99gOUH8CXI/AAAAAAAAA9I/d3gOum1fJ6s/s1600-h/pic28145-796618.jpg]
3).
After that. Take this example.
PROCESS BEFORE OUTPUT.
MODULE STATUS_0100.
LOOP AT ITAB WITH CONTROL tabc
ENDLOOP.
PROCESS AFTER INPUT.
MODULE CANCEL AT EXIT-COMMAND.
LOOP AT ITAB.
   Module read_table_control.
ENDLOOP.
module user_command_0100.
In this Module read_table_control, You should write the following code
MODULE read_table_control INPUT.
MODIFY itab INDEX tabc-current_line."( This will update the
"ITAB table MARK field with 'X ' whatever we have selected
"on table control.)
ENDMODULE.
4)
If you want to Delete some of the records from Table control
follow this code Create one pushbutton and give Fucnction code to that
and write below code
CASE OKCODE.
WHEN 'CREATE'.
LOOP AT itab WHERE mark = 'X'.
"Use UPDATE statement to create new record.
ENDLOOP.
ENDCASE.
I hope that you will get something.
Regards,
Venkat.O

Drop down in screen painter

i would like to have a drop down in screen painter.
i declared in screen painter as listbox - also i namned function code lstbx
now i have to variants:
first is just taking the name of the domain and giving all values to it. the problem is in frontend that i can select a value (from my range) but it does not hold any value after selection... after selection the field is empty again and nothing happens...
the second option; a structure
here it shows only the first value don't know why not the others.

not answerd, but closed

How to add a search help on a screen field from screen painter

Hi,
I would like to add an existing Search Help on a screen field in Screen painter.
Of course it's possible to just click on th screen field and in the property box, I just have to set the name of teh search help.
The problem is that I need the screen field to be grey and user musn't be able to change the field value if he doens't use the search help.
I'm not allowed to modify the existing search help or to built it on my own from source code, I must use the existing one.
Do you have an idea on how to do so?
Regards,
Morgan

Dropdown Box:
In the screen painter for that field goto properties -> Dropdown ->select listbox.
Option 1:
Instead let that field be in change mode and if user enters any wrong entry which is not there in the table give a error messgae.
CHAIN.
    FIELD addr1_data-country.
    MODULE modify_screenfields1.
ENDCHAIN.
MODULE modify_screenfields1 INPUT.
CASE sy-ucomm.
    WHEN 'ENTER' OR 'EXECUTE'.
      IF NOT addr1_data-country IS INITIAL.
        SELECT SINGLE landx FROM t005t INTO lws_landx WHERE
                                      land1 = addr1_data-country
                                  AND spras = 'EN'.
        IF sy-subrc <> 0.
          MESSAGE e000(zo_spa) WITH text-022. " Invalid Country code
        ELSE.
          t005t-landx = lws_landx.
        ENDIF.
      ELSE.
        CLEAR: t005t-landx.
      ENDIF.
   ENDCASE.
ENDMODULE.                 " modify_screenfields1 INPUT
Option 2: Other than if u want the way u like, let that field be greyed out. don't attach the search help.
In the PROCESS ON VALUE-REQUEST.
FIELD addr1_data-region MODULE region_pov.
MODULE region_pov INPUT.
Using the F4IF_INT_TABLE_VALUE_REQUEST table value request show the search help.
also make that field input enabled.
ENDMODULE.                 " region_pov INPUT
I think this will solve ur problem.
Regards,
Prakash.
Message was edited by: Prakash Ramu

How to Set Default Value of Dropdown Menu on Screen Painter

Hi,
I have 2 dropsdown menu, the first one's dropdown values are taken as defined (input1 TYPE bcont-type). The second dropdown values are defined using FM vrm_set_values. How do I set the default value for both dropdown in screen painter?

Hi,
Try this
PARAMETERS: P_EBELN TYPE EKKO-EBELN MODIF ID S1 AS LISTBOX VISIBLE
LENGTH 20.
ID = 'P_EBELN'.
VALUE-KEY = 1.
VALUE-TEXT = 'Hi'.
APPEND VALUE TO T_DROP.
CALL FUNCTION 'VRM_SET_VALUES'
EXPORTING
    id                    = ID
    values                = T_DROP
EXCEPTIONS
   ID_ILLEGAL_NAME       = 1
   OTHERS                = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
READ TABLE T_DROP INTO WA_DROP INDEX 1.
P_EBELN = WA_DROP-TEXT.

Error while opening a screen painter

Hi all,
I am trying to modify a screen in SE80. But when i am clicking on the screen painter it shows 'EU_SCRP_WN32 : timeout during allocate / CPIC-CALL: 'ThSAPCMRCV'
Message no. 37033. Please let me know how to resolve this issue. Thanks a lot for your help!
Regards,
Priti

For the Future Problem Facers:
I too faced the same problem and the below steps helped me.
Re: SFLIGHT is NOT defined for the current logical database.
You can check the completeness of the program installation by starting the program gneux.exe locally in the SAPGUI directory (for example, by double-clicking on the program name in the Explorer window).The Layout Editor is displayed with German texts and an empty drawing area for the pseudo screen EUSPDYND 0000.
If the installation is not complete, an error dialog box provides information regarding the cause of the error, for example, sometimes the DLL eumfcdll.dll is missing after reinstalling the SAPGUI. For example, the eumfcdll.dll DLL was sometimes missing after the SAPGUI was reinstalled.

F4_FILENAME in search help in screen painter

Hello gurus,
I want to design a screen in which the text input field is used to get file name. For that i need to enable file search in local folders and drives with f4 key press. I wish to use the functionality of function module 'F4_FILENAME" in screen painter. How can i do that?
I tried creating search help for RLGRAP structure. It compiles fine but gives the message 'No inout for selection'.
What should i do?

Thank you all,
The problem has been solved.
I am posting the final code.
1. In se38, i created program zprogram.
2. In se51, i created a screen for the program zprogram.
3. In layout, i took 2 buttons and one input/output field.
1st button for import and 2nd button for exit.
4.In flow logic-
i wrote the follwing code.
PROCESS BEFORE OUTPUT.
MODULE STATUS_100.
PROCESS AFTER INPUT.
PROCESS ON VALUE-REQUEST.
FIELD FILENAME1 MODULE F4_FILE_SEARCH.
5. IN THE MAIN PROGRAM
i wrote the following code-
REPORT ZPROGRAM.
DATA: FILENAME1 TYPE RLGRAP-FILENAME,
           OK_CODE TYPE SY-UCOMM.
CALL SCREEN 100.
MODULE F4_FILE_SEARCH INPUT.
OK_CODE = SY-UCOMM.
CALL FUNCTION 'F4_FILENAME'
EXPORTING
    FIELD_NAME         = 'FILENAME1'
IMPORTING
    FILE_NAME           = FILENAME1
ENDMODULE.
MODULE STATUS_100 OUTPUT.
CASE OK_CODE.
WHEN 'IMPORT'.
MESSAGE 'THE FILE IS RECIEVED' TYPE 'I'.
WHEN 'CANCEL'.
LEAVE PROGRAM.
ENDCASE.
ENDMODULE.
I REFERRED TO THE DEMO PROGRAM MENTIONED
IN OTHER POST
NAME OF THE DEMO PROGRAM IS - DEMO_DYNPRO_F4_HELP_MODULE

Is it possible to display the standard function keys in screen painter

Hi ,
I design a screen in se51 where I use push buttons and input/output buttons and so on in the layout, here in the layout or in my final output screen(when i assign this screen to a transaction) I would like to display other standard keys, ie the function keys and application toolbar items. I would like to know whether there is a possibility to do this , if yes then how?
In a menu painter there is a possibility where I can customize the keys or I can use the standard keys by going to se41 extras->adjust template. Is there similar possibilities in the screen painter.

Ok I see. I should use &var.
Edited by: xerosaburu on Aug 18, 2009 11:37 AM

Is there any possible to display the text in big font in screen painter

HI all!
i want to display the text in the large size in the text field in the screen painter in the odule pool programing.Is there any possible.What i have to do in the screen painter to display the text in the large size.Also is there any possible to put the color for the text.Give me reply

HI
CALL METHOD o_dyndoc_id->initialize_document
      EXPORTING
        background_color = cl_dd_area=>col_tree_level1.
    DATA : dl_text(255) TYPE c. "Text
    CALL METHOD o_dyndoc_id->add_text
      EXPORTING
        text         = 'Flight Details'
        sap_style    = cl_dd_area=>heading
        sap_fontsize = cl_dd_area=>large
        sap_color    = cl_dd_area=>list_heading_int.
* Display document
    CALL METHOD o_dyndoc_id->display_document
      EXPORTING
        reuse_control      = 'X'
        parent             = cont
      EXCEPTIONS
        html_display_error = 1.
    IF sy-subrc NE 0.
    ENDIF.
by using these methods you can achieve i hope..
have a good day.
regards
sarves

Issue with Screen Painter Add-On after patch updation

Hi Experts,
We are using 2007 B PL10. We upgraded to PL 11 and now we are getting the following error while trying to start the Screen Painter Add-On.
"Wrong Executable digital signature for Add-on"
Please help!
Thanks in advance
Ajith G

Hi Ajith,
Check the thread
Installing addons on client
Regards
Jambulingam.P

Passing the values from selection screen to screen painter

Hello Friends,
I'm making one report program in which im calling one screen which i have designed, in my selection screen there is a select option for customer tht accepts value range now i want to select all the customers entered in select options and pass these values in screen(screen painter).
pls guide me how this can be done.
Regards,
Sunny

Screen painter is a tool in ABAP dev workbench used to create the screens using the
T-code SE51. In the screen painter, you can define the following interface elements with their associated attributes.
1. Input/Output Fields
2. Field Names
3. Checkboxes
4. Radio Buttons
5. Group Boxes
6. Sub screens.
7. Pushbuttons with No Fixed Position
Create a Z program in tcode SE38.
Go to transaction SE51.
Enter the created program name and screen number.
Click on flowlogic tab.
Uncomment the statement u201C MODULE STATUS_0100 u201C.
CASE SY-UCOMM.
    WHEN 'EXIT'.
      LEAVE PROGRAM.
    WHEN 'BACK'.
      LEAVE PROGRAM.
    WHEN 'DISPLAY'.
      SELECT SINGLE Fileds to selsct
           INTO (interanl table or tablename-fileds)
      WHERE Condition.    WHEN 'CLEAR'.
      CLEAR table.
ENDCASE.
ENDMODULE.

How to show screen design in .srf (from Screen Painter) using SDK?

How to show screen design in .srf (from Screen Painter) using SDK?

You need to use the LoadBatchActions method of the Application object to load .SRF files.
John.

How to insert tabstrip control in module pool screen painter

Hi all!
plz tell e how to use tabstrip control in module pool screen painter.Also plz give me an example program using tabstrip control.

To insert tabstrip just open layout of screen and press on the tabstrip button there .
Use this souce code further to activate it .
CONTROLS tabstrip TYPE TABSTRIP.
DATA: okcode TYPE sy-ucomm,
dynnr TYPE sy-dynnr,
flag type flag,
active like tabstrip-activetab .
call SCREEN 100.
*& Module USER_COMMAND_0100 INPUT
text
MODULE USER_COMMAND_0100 INPUT.
data: lv_okcode type syucomm.
lv_okcode = okcode.
clear okcode.
case lv_okcode.
WHEN 'TAB1'.
dynnr = '0110'.
WHEN 'TAB2'.
dynnr = '0120'.
WHEN 'TAB3'.
dynnr = '0130'.
WHEN 'TAB4'.
dynnr = '0140'.
WHEN 'TAB5'.
"check authorization, if authorization fails
flag = 'X'. "set the global flag
active = 'TAB1'. "store active tab in global variable
dynnr = '0110'. "set the screen number
WHEN 'BACK' or 'EXIT'.
leave program.
ENDCASE.
IF lv_okcode(3) = 'TAB'.
tabstrip-activetab = lv_okcode.
ENDIF.
ENDMODULE. " USER_COMMAND_0100 INPUT
*& Module STATUS_0100 OUTPUT
text
MODULE STATUS_0100 OUTPUT.
SET PF-STATUS 'MAIN'.
SET TITLEBAR 'xxx'.
IF tabstrip-activetab IS INITIAL OR
dynnr IS INITIAL.
tabstrip-activetab = 'TAB1'.
dynnr = '0110'.
ENDIF.
"set the activetab explicilty here
if flag eq 'X'. "from authorization failure
tabstrip-activetab = active. "'TAB1'
clear flag.
endif.
ENDMODULE. " STATUS_0100 OUTPUT

How to read the contents of Input Field created via Screen Painter?

Hi All,
I have a module program / dialog program, on my second screen, I created an input/outbox field via screen painter of course,
now in my PAI, how can I read the contents of the input/outbox field?
Let's say the name of my input/outbox field is: P_WEKRS. Note: Get Parameter and Set Parameter is ticked.
PROCESS AFTER INPUT.
LOOP WITH CONTROL TC_DATA.
MODULE MODIFY_DATA.
ENDLOOP.
I want to get the value of the input/outbox field before my loop in table control? I thought that it will work like normal parameter in non-dialog programs.
Any helpful inputs will be appreciated/rewarded.
Thanks.
Jaime

Hi, Jaime
Do the following Change in you Follow Logic
PROCESS AFTER INPUT.
MODULE read_or_change_value. " Add this
LOOP WITH CONTROL TC_DATA.
MODULE MODIFY_DATA.
ENDLOOP.
Add the Bellow Module code in you Driver Program.
MODULE read_or_change_value.
DATA: P_WEKRS like " the Field on Screen. Must be the same name as on SCREEN. and Type must be same too.
" Here you will find the Value in that Variable or if you will change the Value here you will find it change on Screen
END MODULE.
Please Reply if any Issue..
Best Regards,
Faisal

How to swap fields in screen painter.

hello gurus,,
how to swap fields in screen painter.

Hi
Go through the link given below :
http://www.standardware.com/pdf/stdwsp.pdf
With Regards
Nikunj Shah

Listbox in screen painter

Similar Messages

Maybe you are looking for