Listen and Charge at the same time?

Can I listen to the Nano and charge it via the USB port at the same time?

I'm having the same problem. I want to listen to my nano at work, but it needs to be charged. If I eject it from iTunes, the battery no longer charges.
I'm using a W2K PC, let me know if you need any other info. This is very frustrating.

Similar Messages

  • Hi there, Will be possible listen and charge at the same time my iPod shuffle in my car?

    Hi there, Will be possible listen and charge at the same time my iPod shuffle in my car? I have got a jack going to my sound system the issue i would like to solve is charging at the same time

    Since the shuffle (except for the 1st gen shuffle) uses the same "port" (the headphones jack) for sound output and charging, there is no way to do both concurrently.
    NOTE:  You can charge and play at the same time on the old white 1st gen shuffle that looks like a USB flash drive.

  • Ipod nano (5th generation) - want to use headphones and charge at the same time

    I have an ipod nano (5th generation).  Do I need a special set of headphones to use the headphone jack and charge the ipod at the same time?

    The iPod nanos have a 30 pin dock connector and a headphone jack. When you charge the iPod you use the dock connector therefore you can use and charge at the same time. You cannot use and charge the iPod shuffle at the same time. You might have the two mixed up.

  • Im worried about the battery percentage while play a game on my iphone 4s.so that,i decided to play a games and charging at the same time.is it problem on my battery ? im to worried.please give a conclusion.

    Im too worried about the battery percentage while playing a game on my iphone 4s.so that,i decided to play a games and charging at the same time.im too worried for my battery problem on the future.please give a conclusion.

    It is perfectly fine to use the phone while charging it.

  • Connecting USB and Charger at the same time

    Hello guys, Is there any problem connecting usb and charger at the same time? after that, the Nokia Battery Monitor 2.0 shows 93% after full charge. Any ideia?

    yes, there is a male-female usb extension cable sold on computer store.
    Just pick up the length you need.
    But the price is almost the same with the cheapest 2.0 usb hub (4 port), so you better consider the usb hub one.
    Good Luck.

  • IPhone 4s , when I call and charging at the same time, I felt like been shocked when my ear close to the phone?

    iPhone 4s , when I call and charging at the same time, I felt like been shocked when my ear close to the phone?

    Talk to your email provider. They control their servers and what happens to your email.

  • Using ipod and charging at the same time

    I want to know if i can use the ipod and charging it at the same time.

    Your iPod has to be on automatic update with disk mode off to be able to charge while using your iPod.

  • Charge and connect at the same time

    I'm still waiting to get an N8 so can anyone tell me if it's possible to connect up a charger at the same time as using USB to connect a keyboard/mouse and external storage device via a powered usb hub?
    In other words, can I use USB devices while it is being externally powered?
    What about when it's using a dock that I've briefly seen on some youtube videos?

    Sorry, but we're not allowed to speculate about future releases on these forums.
    Cheers!
    -Bryan

  • IPod Touch 4g won't charge and play at the same time

    I used to have a 4g Nano that I would play in my car through an aux cable and charge through a cigarette lighter charger. I just got a 4th gen iPod Touch and it no longer lets me charge and play at the same time. If both wires are connected it will only charge and not play, once I pull the charger part out it will play through the speakers. Is there a fix to this? Do I need a different charger so that it won't think it's simply docked?

    You would need to turn off hard drive mode via iTunes iPod settings on your home system to do this. I don't know if you have this mode on or off already. I thought I read that there is a way to enable/disable hard drive mode via the iPod buttons but I don't remember how.
    Thanks,
    Steven

  • Blinking green light and then orange and green at the same time...

    I have an Ipod shuffle that was working good before and I don't know why I let it one month and after when I connected it to the computer Windows and Itunes didn't recognized it. It seems to function good because I can listen the songs that were before in the Ipod, and when I don't have battery I connect it to the computer and it seems to charge because after I have battery. The only thing is that when I connect it I don't listen that windows recognize it (like when I connect my USB key) and Itunes neither. Moreover there is a green light blinking two seconds and after green and orange at the same time (little lights) during one second. I can't restore it because it doesn't appear in Itunes.
    Do you know what can do that???
    Thx

    Faites ceci:
    - Retirez le Shuffle du socle
    - Cliquez sur Démarrer, puis Bouton droit sur "Poste de Travail" et prenez "Gérer" puis double-cliquez sur "Services et applications", puis double-cliquez sur "Services"
    -Localisez "Ipod Service", double-cliquez dessus, et cliquez sur le gros bouton "Arrêter" (Statut de Service Smile
    -Rebranchez votre ipod, sur le socle.
    -Sous Windows, effacez l'intégralité de son contenu. Ou alors faites un bouton droit sur l'icone du "disque" puis formattez.
    -Lancez iTunes
    -Ce dernier va détecter l'ipod et va vous demander son nom, avec une case en dessous "Remplir automatiquement"
    -Laissez cette case validée !
    -Pendant que l'ipod se remplit (il convient d'avoir des morceaux dans la bibliothèque iTunes) allez dans longlet "Réglages" de l'ipod, sous iTunes
    -Cochez la case "activez l'utilisation comme disque dur"
    -Cliquez sur appliquer pour valider cette option !
    Vous pouvez maintenant éjecter votre ipod (ne le retirez pas du socle, cliquez sur le bouton approprié sous itunes !) et voilà, tout fonctionnera à merveille !

  • My SB Audigy 2 card can't use headset and musicamplifier at the same time

    Hi, i just bought a SB Audigy 2 [D400] and i have downloaded drivers and programs. I run Windows XP SP2.
    The soundcard works fine but it is very very annoying that i physically have to change the jack in the green=line out jack from headset to musicamplifier when i want to use my musicamplifier and change back the jack in the green=line out from musicamplifier to headset when i just want to use the headset/headphones .
    In the shop they told my that i can connect both amplifier and headset at the same time and then with creative software control whether there is sound in the headset or in the amplifier. But i can't simple get it work.
    I tried to use the green to the amplifier and the headset/speakers in the black (line out 2) and then with creative speaker settings softeware choose headphones but still the ampliefier receive the sound and no sound in the headphones. Why? In fact no matter what configuration i try the headphones doesn't work.
    But if i change the jacks so headset is in the green line out then only headset is working and the amplifier doesn't work no matter i put it in sort=line out 2 jack or orange=line out 3 jack.
    Can somebody here tell me if it is possible or not to connect both headset and external amplifier and control by software which to play? and how?
    please help, thx.
    Michael

    If you can have an ASIO compatible music playing system, then it might be possible to have system like you wish when using Creative Audigy 2 card. Since ASIO bypasses Windows Audio System, you can use both 'drivers' (ASIO - WDM/MME/DS) side by side.
    Say you want to play a game (using headset /w mic) and someone other like to listen music at the same time. With ASIO capable system you can output your music for example to "center L/R (stereo) channels" and same time output sounds from other source (using MME/DS/WDM drivers) to normal output channel (Front L/R). Only thing is, you need to set your speakersystem to 4 or 6 (depending which other channel you're using) (and for better 'balance' to adjust "angle" on THX console. You get the THX console by installing Audigy 2 Zs software).
    Try for example http://img332.imageshack.us/img332/463/djs9mo.jpg[/img] width="406" alt="Image Hosted by ImageShack.us" >
    Another option:
    Say you want to play music through external amplifier and play game online with your headset + microphone (eg. others but you listen the music, you play games)
    --> try free http://img332.imageshack.us/img332/4589/tbp7rz.jpg[/img] width="406" alt="Image Hosted by ImageShack.us" >
    If you use ASIO on BeatPort Player you can select L/R individually from the list(s). Same rules as described earlier.
    = You can play from 2 different sources simultaoneusly (ASIO + WDM/MME/DS) to two different outputs without disturbance. The other (WDM/MME/DS) source is set 'automatically' output to (Audigy) "green" port, and the other (ASIO) to "black" or "orange" port (as set).
    .jtpMessage Edited by jutapa on 09-5-2005 05:30 AM

  • No Airtunes and Internet at the same time

    Hello,
    I'm using an iPod Hi-Fi in combination with an Airport Express basestation.
    My internet connextion goes through PPPoE. So I use the Airport Express in "Bridge mode" But...
    iTunes won't find the (wireless) iPod Hi-Fi when PPPoE is winked "on" in the airport settings. When I wink PPPoE "off", iTunes do find the iPod Hi-Fi.
    But without PPPoE I don't have an internet connexion.
    So I can't use the internet and listen to Airtunes at the same time.
    Does anyone have a solution?
    Thanks!
    Greetings,
    Jarchall

    I'd suspect that the Bonjour would not work properly if the wireless thinks the next hop down the wireless trail is the open internet instead of the Airport Express. PPPoE basically makes a tunnel from your computer to the ISP server. The PPPoE packets are wrapped in a special transport package the express probably can't get into unless there is some future specialized firmware update.
    Unless you have some burning need for bridge mode I would configure the Airport Express to connect via PPPoE with the setup assistant.
    -Alex

  • Holding 'select' and 'menu' at the same time doesn't help. What now?

    First, the only thing that would happen when trying to turn it on was that it would show a message with the Ipod support website but nothing else. Now it doesn't even turn on. Pressing 'select' and 'menu' at the same time doesn't help and it is not on Hold. Any ideas or is it just dead?

    I have the same problem, only not so far gone. My iPod keeps showing me the logo for a couple seconds, then a red X that tells me to go to apple.com/support. I have been here several times and tried the five R's and nothing has worked. My iPod is also charged and the hold isn't on. My computer isn't recognizing that it is hooked up, my warranty is up and this is my second iPod. My first one's death was completely my fault, but I did nothing to prompt this lock down. I am about ready to try some of the risky hints online to get it to work but I would like something less extreme than taking the thing apart.

  • 3G and wifi at the same time

    Can I use 3G and wifi at the same time on my IOS 6 iPhone 4S? I have no Internet at home though the wifi, so I want to use the phones data plan, but I do have a wifi router and want it to use Apple TV etc. Is it possible?

    Hi and welcome,
    The iPhone will pick WifI over any Cell signal mist of the time. Even if the WiFi signal is weak. It is typically the faster. It can't use both. If you are being charged for you data use I would always opt for WiFi. If you are in an area that has both you and you need to use data services you can switch to airplane mode then turn WiFi back on. You won't receive phone calls during that time but you won't be using Cell Data either.
    Hope this helps,
    Message was edited by: lyriconii

  • My Ipad mini does not see my printer. my wife's ipad2 does. We both use IOS8 and upgraded at the same time. How can I remedy this?

    My Ipad mini does not see my printer. my wife's ipad2 does. We both use IOS8 and upgraded at the same time. How can I remedy this?

    OK great info!
    I found 2 possible ethernet to USB adapters:
    By "Plugable":  USB 2.0 to ethernet LAN wired network adapter - seems this will work, but I'll contact Plugable.
    2. Apple USB Ethernet Adapter
    Easily connect your MacBook Air computer to an Ethernet network with the Apple USB Ethernet Adapter. Small and light, it connects to the USB 2.0 port of your MacBook Air and provides an RJ-45 connector that supports 10/100BASE-T performance.  BUT NOT SURE IF THIS WILL WORK ON ANYTHING BUT a MacBook Air…
    One person commented: 
    This little gem used to be the device of choice for adding a second Ethernet interface to a Mac Mini Server and I'd been using one that way for about a year. After doing a software update to 10.6.6 it stopped working. Forewarned is forearmed – it appears that Apple is finally enforcing the MacBook Air system requirement.
    Thanks for any additional comments.
    Best regards,
    Steve Schulte
    Sunday 6 January 2013

Maybe you are looking for

  • SSO and SAML issue with Fiori

    Hi I have set up a Fiori system based on 7.4 and it is working fine. I attempted to use Single Sign using SAML based on ADFS as an identity provider which we are already using in our environment. I have followed this guide by Chris Wealy on  Using SA

  • Error while TU departure from checkpoint.

    Hi Experts, I get the below error while doing departure of TU(/scwm/tu) after completion of Loading & GI Transportation unit 7000000014301/ is not currently at a checkpoint. So reply is higly appreciated. Regards, Rock

  • MIR7 Park Invoice - where is PO number stored?

    Hi all, When registering an invoice in transaction MIR7, I can enter one or more PO numbers in the field "Purchase Order/Scheduling Agreement" on the "PO Reference" tab. If I temporary save the invoice, then in which table is the link between the Inv

  • Transmit audio to multiple iPhones over bluetooth

    Can i transmit audio from my iphone to opther iphones? Is there an App that does this? Or does iPhone ONLY transmit and not capable of receiving bluetooth? The goal is to have multiple iphones listening to my bluetooth audio output. How can this be d

  • Ipod is not leting me sync

    ok when i hit sync a message pops up saying the ipod is synced with another itunes library do you want to erase this ipod and sync with this itunes library? and that it can only be synced with one library at a time and asks if i want to replace the t