Listen to message from an outside line
Have a quick question! How do I listen to my messages from an outside line.
You can either call into your mailbox and press * or setup a DID number and translate this number to your Unity hunt pilot using a translation pattern. You can also enter your mobile number as an alternate extension so when you dial the external number, you are only prompted for your PIN.
Hope this helps. If so, please rate the post.
Brandon
Similar Messages
-
Formerly, an e-mail with a website, photo, etc. attachment that I opened required only that I click close tab return to my e-mail message. Since upgrading a few days ago, the only option present is to exit, which now requires re-opening firefox then my e-mail browser. Any website I am examining that I want to close automatically exits me from Firefox.
there should be an X on the right side of each tab. clicking on it should close that tab
-
The problem started last night when our Exchange queues backed up due to a virtual memory error and we had to do a failover. I see the following item in the application log repeating.
Source: CiscoUnity_CsServices
Category: run
Type: error
Event ID: 1065
Description: AvCsGateway: FindCsComponentsEX failed. AvCsMgr not started.
Source: CiscoUnity_CsServices
Category: run
Type: error
Event ID: 1065
Server: Epitpvmp01
Description: AvCsGateway: FindCsComponentsEX failed. AvCsMgr not started.
When I look in the services section it shows all the services as started. I've tried manually restarting services and have rebooted the server multiple times. The web interface works just fine as well. I haven't been able to find any thing online that matches this. Has anyone seen this before or knows how to fix it?
Unity 7.0(2), windows 2003, sp2
CM 7.1.3.32900-4
Exchange 2003 sp2, windows 2003 sp2Try restarting the AvcsGateway service.
If that does not help, re-run the Service Configuration wizard. -
How can I access my Call Handlers from outside line (outside district)
CISCO VoIP System Info:
Cisco Unity Connection version: 8.6.2ES25.21900-25
CM Admin System version: 8.6.2.21900-5 on C200M2 Servers
Our engineer setup our Call Handlers so that in our to change the recordings on them, you diall 7800 from a phone inside the office, or as he put it in the procedures, from within the district. Once you dial, you need to enter the user code, password, then the extension of the Call Handler, and we have no problems recording/changing any Call Handlers. However, due to possible inclement weather approaching in the next few weeks, I was asked how we cna change them from an outside line (manager's home, etc.). We cannot access from an outside line. 7800 is not a DID, it is simply the extension he assigned to access the call handlers. I even went so far as to setup a dummy phone and forward it to 7800, but this does not work either. It forwards to the extension's voicemail. Is there a way we can access the Call Handlers from an outside line? Any help would be gretaly appreciated. Thank you in advance.Hey Joseph,
Go Flames ....errrrrrrrrrrrrrrrrrr maybe not so much
What you are trying to get to is really just the Greetings Administrator
conversation and there are multiple ways to get there.
For example, you can set up a Caller Input off any mailbox (Press 1-9) let's say 7 to
go to Conversation> Greetings Administrator. So you could set this on the managers mailbox
and when he calls his own number from home once his greeting
kicks in he can press 7 to link to the Greetings Administrator conversation
or
You could set up a DID DN xxx-xxx-2345 as a CTI-RP and set Call Forward All to reach Unity Connection.
In this case you will need to use the Forwarded Routing Rules = xxx-xxx-2345 route to
Greetings Administrator. Make sure to move this rule to the bottom of the list!!
Cheers!
Rob
"Why do the best things always disappear "
- The Band -
How to stop reading foreign queue message from MDB using weblogic 6.1? thanks,
Hi, I am using weblogic 6.1 to communicate with IBM MQseries foreign
queue. I use the asychronous way "onMessage()"(properly the only
known way) to listen the messages from the queue. I like to stop
receiving messages if my south bound stream has problems and not able
to process the message, I would like to stop fetching the message with
my MDB(message driven bean) untill the down stream problem is cleared.
As weblogic uses container to create the multiple session and
connections internally, how can I efficiently stop the message
delivery, do I have to locate all the connections and issue
connection.stop()for each one, or there is better way to do this.
Thanks in advance.If you never use FaceTime on your Mac, open the FaceTime app on it and sign out. Also, the following instructions are from Connect your iPhone, iPad, iPod touch, and Mac using Continuity - Apple Support
Turn off iPhone cellular calls
To turn off iPhone cellular calls on your iPad or iPod touch, go to Settings > FaceTime and turn off iPhone Cellular Calls.
On your Mac, open the FaceTime app and go to FaceTime > Preferences. Click Settings and deselect the iPhone Cellular Calls option. -
Listening for messages for a certain duration
I have a situation where my JMS client should listen for messages from
Queue for a certain amount of time. Is this possible?
Thanks,
Sanjay
Why not create a timer and close the JMS subscriber (and maybe even the
session and the connection) after the time elapses?
--dejan
Sanjay Ungarala wrote:
>Gregory,
>
>Thanks for your reply.
>
>I was looking for Async message listener. I want my message listener to stop
>listening to queue after certain duration. Is this possible?
>
>Thanks,
>Sanjay
>
>Gregory Brail wrote:
>
>
>
>>I guess no one has answered yet, but what exactly do you mean? Obviously,
>>when you receive a message synchronously the various "receive" calls give
>>the option to specify how long you want to wait for a message to become
>>available. But I imagine you want more than that...
>>
>> greg
>>
>>"Sanjay Ungarala" <[email protected]> wrote in message
>>news:[email protected]..
>>
>>
>>>I have a situation where my JMS client should listen for messages from
>>>Queue for a certain amount of time. Is this possible?
>>>
>>>Thanks,
>>>Sanjay
>>>
>>>
>>>
>>>
>
>
>
-
Listening broadcast message (serial RS-485 with LabView)
I want to listen broadcasts message from a Solar Boost 2512i (Blue Sky Energy). I just want to listen the message code 0x02 (Masters broadcasts its values).
I don't understand how to synchronize the serial read with Labview.
Jean-Marc
Jean-Marc
LV2009 and LV2013
Free PDF Report with iTextSharpHi Jean-Marc,
Here are some links to several discussion forum's that you may wish to look over:
http://forums.ni.com/ni/board/message?board.id=140&message.id=6108&requireLogin=False
http://forums.ni.com/ni/board/message?board.id=250&message.id=7553&requireLogin=False
http://forums.ni.com/ni/board/message?board.id=170&message.id=70471&requireLogin=False
http://forums.ni.com/ni/board/message?board.id=170&message.id=196197&requireLogin=False
Regards,
John E.
Applications Engineering
National Instruments -
Is there any way to initiate a MeetMe from an outside line?
Not natively, some folks say they have created scripts or some other stuff to do this but I can't really tell you how they work.
You would need to search CSC or maybe one of them will jump in and elaborate on that.
HTH
java
If this helps, please rate
www.cisco.com/go/pdihelpdesk -
ORA-28500: connection from ORACLE to a non-Oracle system returned this message: ORA-02063: preceding line from OWB_75
Scenario:
I am having difficulty getting ODBC connection between Oracle OWB app with an 11gR2 DB (running on a VirtualBox Linux) and SQL Server 2008 running directly on the host. (Windows 8)
I am trying to take a SQL Server 2008 feed into Oracle Ware house Builder, and think(!) I have read everything and configured it in accordance (but I presume not given 3 days of failed attempts to fix it). I have also read several blogs, hence there might be a few more settings in the configuration files than the formal documentation says, but these have come from blogs that have “Solved” problems for other similar situations.
The environments:
HOST:
Name: RESOLVEIT-PC
IP: 192.168.1.80
Windows 8 (64bit) , with system DSN ODBC connection ACME_POS created with 32 bit ODBC set up (This setting still shows up fine in the 64 bit ODBC).
GUEST VM:
Name: OraDBSvr.com
GUES fixed IP Address: 192.1.200
Oracle VirtualBox (4.2.16)
Oracle Redhat Linux 6 (x86)
Oracle 11gR2 Enterprise Edition (11.2.0.1.0)
ODBC: Freetds driver
Configuration files:
initacmepos.ora
HS_FDS_CONNECT_INFO = 192.168.1.80/SQLEXPRESS/ACME_POS
HS_FDS_TRACE_LEVEL = 0
HS_FDS_SUPPORT_STATISTICS=FALSE
HS_RPC_FETCH_REBLOCKING= OFF
HS_FDS_FETCH_ROWS = 1
HS_FDS_SHAREABLE_NAME = /usr/local/lib/libtdsodbc.so
set ODBCINI=/opt/odbc/odbc.ini
# set <envvar>=<value>
odbc.ini
[ACME_POS]
Driver = FreeTDS
Description = ODBC Connection via FreeTDS
Trace = 1
Servername = 192.168.1.80
Database = dbo
odbcinst.ini
[PostgreSQL]
Description = ODBC for PostgreSQL
Driver = /usr/lib/psqlodbc.so
Setup = /usr/lib/libodbcpsqlS.so
Driver64 = /usr/lib64/psqlodbc.so
Setup64 = /usr/lib64/libodbcpsqlS.so
FileUsage = 1
[MySQL]
Description = ODBC for MySQL
Driver = /usr/lib/libmyodbc5.so
Setup = /usr/lib/libodbcmyS.so
Driver64 = /usr/lib64/libmyodbc5.so
Setup64 = /usr/lib64/libodbcmyS.so
FileUsage = 1
[FreeTDS]
Discription = TDS driver (Sybase / MS SQL)
Driver = /usr/local/lib/libtdsodbc.so
# Setup = /usr/local/lib/libtdsS.so
FileUsage = 1
CPTimeout =
CPReuse =
[oracle@oraDBsvr etc]$
freetds.conf
# $Id: freetds.conf,v 1.12 2007-12-25 06:02:36 jklowden Exp $
# This file is installed by FreeTDS if no file by the same
# name is found in the installation directory.
# For information about the layout of this file and its settings,
# see the freetds.conf manpage "man freetds.conf".
# Global settings are overridden by those in a database
# server specific section
[global]
# TDS protocol version
; tds version = 4.2
# Whether to write a TDSDUMP file for diagnostic purposes
# (setting this to /tmp is insecure on a multi-user system)
; dump file = /tmp/freetds.log
; debug flags = 0xffff
# Command and connection timeouts
; timeout = 10
; connect timeout = 10
# If you get out-of-memory errors, it may mean that your client
# is trying to allocate a huge buffer for a TEXT field.
# Try setting 'text size' to a more reasonable limit
text size = 64512
# A typical Sybase server
[egServer50]
host = symachine.domain.com
port = 5000
tds version = 5.0
# A typical Microsoft server
[ACME_POS]
host = 192.168.1.80
port = 60801 # also tried 1433
instance = SQLEXPRESS
tds version = 8.0
client charset = UTF-8
tsql -LH 192.168.1.80
ServerName RESOLVEIT-PC
InstanceName SQLEXPRESS
IsClustered No
Version 10.50.4000.0
tcp 60801
np \\RESOLVEIT-PC\pipe\MSSQL$SQLEXPRESS\sql\query
via RESOLVEIT-PC,0:1433
Oracle listener:
[oracle@oraDBsvr log]$ cat /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
# listener.ora Network Configuration File: /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
# Generated by Oracle configuration tools.
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = acmepos)
(ORACLE_HOME = /u01/app/oracle/product/11.2.0/dbhome_1)
(PROGRAM = dg4odbc)
(HS = OK)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = oraDBsvr)(PORT = 1521))
ADR_BASE_LISTENER = /u01/app/oracle
[oracle@oraDBsvr log]$ lsnrctl status
LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 16-SEP-2013 13:57:41
Copyright (c) 1991, 2009, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=oraDBsvr)(PORT=1521)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production
Start Date 16-SEP-2013 13:50:34
Uptime 0 days 0 hr. 7 min. 7 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
Listener Log File /u01/app/oracle/diag/tnslsnr/oraDBsvr/listener/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=oraDBsvr)(PORT=1521)))
Services Summary...
Service "acmepos" has 1 instance(s).
Instance "acmepos", status UNKNOWN, has 1 handler(s) for this service...
Service "dw" has 1 instance(s).
Instance "dw", status READY, has 1 handler(s) for this service...
Service "dwXDB" has 1 instance(s).
Instance "dw", status READY, has 1 handler(s) for this service...
The command completed successfully
Oracle tnsnames.ora
[oracle@oraDBsvr admin]$ cat tnsnames.ora
# tnsnames.ora Network Configuration File: /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/tnsnames.ora
# Generated by Oracle configuration tools.
dw =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = dw)
acmepos =
(DESCRIPTION=
(ADDRESS=(PROTOCOL=tcp)(HOST=localhost)(PORT=1521))
(CONNECT_DATA=(SID=acmepos)
(HS=OK)
Oracle sqlnet.ora
[oracle@oraDBsvr admin]$ cat sqlnet.ora
# sqlnet.ora Network Configuration File: /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/sqlnet.ora
# Generated by Oracle configuration tools.
NAMES.DIRECTORY_PATH= (EZCONNECT, TNSNAMES)
ADR_BASE = /u01/app/oracle
I can connect from the linux server to SQL Server, and query the database:
[oracle@oraDBsvr etc]$ tsql -S acme_pos -U acme_dw_user -P acme1234
locale is "en_US.utf8"
locale charset is "UTF-8"
using default charset "UTF-8"
1> select last_name from dbo.employees;
2> go
last_name
Davolio
Fuller
Leverling
Peacock
Buchanan
Suyama
King
Callahan
Dodsworth
(9 rows affected)
1>
However, I can’t get a response through Oracle OWB , and I get:
ORA-28500: connection from ORACLE to a non-Oracle system returned this message: ORA-02063: preceding line from OWB_75
In the hs log file I get:
[oracle@oraDBsvr log]$ cat acmepos_agt_3821.trc
Oracle Corporation --- MONDAY SEP 16 2013 13:51:22.170
Heterogeneous Agent Release
11.2.0.1.0
HS Gateway: NULL connection context at exit
[oracle@oraDBsvr log]$
I am really stuck now and going round in circles and can’t see the wood for trees! Can anyone please help?!!
Many Thanks.
Rafe.Let us rewrite your ODBC DSN a little bit... Your current odbc.ini looks like:
[ACME_POS]
Driver = FreeTDS
Description = ODBC Connection via FreeTDS
Trace = 1
Servername = 192.168.1.80
Database = dbo
Let us change it a little bit so that we only need one config file - no odbcinst.ini nor freetds.conf file anymore:
[ACME_POS]
Driver =/usr/local/lib/libtdsodbc.so
Server = 192.168.1.80
Database
= dbo #### I have some doubts that you have a SQL Server database called dbo - one database that always exists is master - so as a test use master here or get the real database name of the SQL Server database you want to connect
Port = 60801 ## make sure it really is the correct port - best would be to check on the SQL server and then try telnet <ip> <port> if you can connect to the SQL server
TDS_Version = 8.0
QuotedId=YES
Especially the last 2 parameters are mandatory. TDS_Version specifies the TDS Version you have to use to connect to the SQL Server and QuotedID is required for DG4ODBC as it surrounds objevt names by double quotes.
What happens now when you try to connect with for example isql - the ODBC test utility shipped with the ODBC Driver manager?
In addition, could you please do me another favour and check the word size of DG4ODBC and the ODBC Driver Manager as well as the ODBC Driver - just execute:
file /u01/app/oracle/product/11.2.0/dbhome_1/bin/dg4odbc
file /usr/local/lib/libtdsodbc.so
file < the patch to your libodbc.so library>/libodbc.so
and post the output. -
Hi, i'm trying to create database link from a database Oracle 11g to PostgreSQL with DG4ODBC, and unixODBC
my configured to /etc/odbc.ini
[PostgreSQL]
Description = Test to Postgres
Driver = psqlodbc
Trace = Yes
TraceFile = /tmp/sql.log
Database = danieldb
Servername =
UserName = SA
Password = password
Port = 5432
Protocol = 6.4
ReadOnly = No
RowVersioning = No
ShowSystemTables = No
ShowOidColumn = No
FakeOidIndex = No
my configured to /etc/odbcinst.ini
[ODBC]
CommLog=1
Debug=1
FileUsage=1
Pooling=No
Trace=1
[psqlodbc]
Description=PostgreSQL ODBC driver
Driver=/usr/lib64/psqlodbcw.so
CommLog=1
Debug=0
FileUsage=1
my configured to /u01/app/oracle/product/11.2.0/xe/hs/admin/initPostgreSQL.ora
HS_FDS_CONNECT_INFO = PostgreSQL
HS_FDS_TRACE_LEVEL = 0
HS_FDS_SHAREABLE_NAME = /usr/lib64/libodbcpsql.so
set ODBCINI=/etc/odbc.ini
my configured to /u01/app/oracle/product/11.2.0/xe/network/admin/listener.ora
Listener =
(ADDRESS = (PROTOCOL = TCP)(HOST = oracle-poc)(PORT = 1521))
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC=
(SID_NAME=PostgreSQL)
(ORACLE_HOME=/u01/app/oracle/product/11.2.0/xe)
(PROGRAM=dg4odbc)
(ENVS="LD_LIBRARY_PATH=/usr/lib64:/u01/app/oracle/product/11.2.0/xe/lib")
my configured to /u01/app/oracle/product/11.2.0/xe/network/admin/tnsname.ora
PostgreSQL=
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = oracle-poc)(PORT = 1521))
(CONNECT_DATA =
(SID = PostgreSQL)
(HS = OK)
i'm try to created public database link :
CREATE PUBLIC DATABASE LINK "orapos" CONNECT TO "SA" IDENTIFIED BY "password" USING 'PostgreSQL';
when i used tnsping
[root@oracle-poc admin]# tnsping PostgreSQL
TNS Ping Utility for Linux: Version 11.2.0.2.0 - Production on 16-MAY-2013 20:34:19
Copyright (c) 1997, 2011, Oracle. All rights reserved.
Used parameter files:
/u01/app/oracle/product/11.2.0/xe/network/admin/sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = oracle-poc)(PORT = 1521)) (CONNECT_DATA = (SID = PostgreSQL)) (HS = OK))
OK (0 msec)
and last i try to use the database link :
SQL> select * from "tabel2"@orapos
2 ;
select * from "tabel2"@orapos
ERROR at line 1:
ORA-28500: connection from ORACLE to a non-Oracle system returned this message:
ORA-02063: preceding line from ORAPOS
Whats wrong with my configuration??
Thank you and best regards,
DanielMike,
yes i've downloaded the ODBC driver manager..
for HS_FDS_SHAREABLE_NAME i use /usr/lib/psqlodbc.so
and i get this error when i call the db link(orpos)
ERROR at line 1:
ORA-28500: connection from ORACLE to a non-Oracle system returned this message:
ORA-02063: preceding line from ORAPOS
for HS_FDS_SHAREABLE_NAME = /usr/lib64/psqlodbcw.so
and i get this error when i call the db link(orpos)
ERROR at line 1:
ORA-28500: connection from ORACLE to a non-Oracle system returned this message:
c
and when i used isql isql to call DNS(PostgreSQL) is success
whats wrong with my config?
about PostGres ODBC did you mean postgresql-odbc-08.04.0200-1.el6.x86_64 ??
Thank you and best regards,
Daniel -
Starting the nzrView in listen mode from the command line...
I want to be able to start the nzrViewer in listen mode when I log into windows and then be able to accept an invite for a collaboration session. When I added a shortcut to the "nzrViewer.exe /listen 5550" to my Startup Folder, it launches the Remote Listener just fine, but when I someone invites me to collaborate a Remote Session, I get an error message "Ticket not provided for Rights Authentication."
I believe that the problem is when I launch the Viewer from the command line, I'm not authenticated to the Zen server, so it can't verify my Rights.
Does anyone have a better way to do this? Or do I have to log into ZCC and launch the "Remote Management Listener" from there?Originally Posted by mcdonalj
I want to be able to start the nzrViewer in listen mode when I log into windows and then be able to accept an invite for a collaboration session. When I added a shortcut to the "nzrViewer.exe /listen 5550" to my Startup Folder, it launches the Remote Listener just fine, but when I someone invites me to collaborate a Remote Session, I get an error message "Ticket not provided for Rights Authentication."
I believe that the problem is when I launch the Viewer from the command line, I'm not authenticated to the Zen server, so it can't verify my Rights.
Does anyone have a better way to do this? Or do I have to log into ZCC and launch the "Remote Management Listener" from there?
There has been some updates in the documentation for 10.2.2 about remote control from cmd line.
Check it out, maybe there is a solution to your problem.
http://www.novell.com/documentation/...a/bcfqcen.html
http://www.novell.com/documentation/...a/bn8ptx7.html
Thomas -
When I send a Group message from my address book, the entire group gets listed in the "To" line. How do I get each member to receive the message individually without listing all members? Its just messy is all. Any help is greatly appreciated.
Hey Grupo Castillo,
Thanks for the question. You can actually configure this behavior from Mail preferences:
1. Choose Preferences from the Mail menu.
2. Click Composing.
3. Deselect the checkbox for "When sending to a group, show all member addresses".
When you send an email to the group, only the groups name will be seen.
Mac OS X: Mail - How to Hide Address Book Group Member Names When Sending an Email
http://support.apple.com/kb/TA21082
Thanks,
Matt M. -
Why can I not print from pages but can if I copy to text edit, I get "printer off line message " from pages ? I use HP wireless printer .
Are you sure you have the right printer?
In UNIX/OSX printers are virtual links to devices and even with the same name can be trying to reach a printer via another network address, so it thinks it is another printer.
Peter -
Listener doesn't pick up messages from a particular source.
I have a queue populated from two different sources. My listener configured on that queue receives messages send from one source and not the other.
I can see the messages from both sources in the queue when I check through the server administration page.
To make things interesting, messages from both the source looks identical (in terms of all the properties except id and timestamp).
Any clues anyone?
ThanksAre the two queues are having two different names.
which server are you using
Can you tell me how to see the messages from in queue from administration console -
I have an AT&T iPhone but only use wifi. Since I updated my phone to iOS 6.0 I cannot receive text messages from other iPhone users outside wifi range. What is the issue?
Check Settings>General>Cellular to be sure you have Cellular Data set to On.
Maybe you are looking for
-
IMac G5 won't complete startup
I started my 2 month old iMac this morning and everything was fine, then I got the message that the OS had shut down and I needed to restart my computer. When I restarted, it stopped at a gray screen and the fan came on. I restarted several times and
-
Hi my itunes has stopped working it says there is a programe error in c drive error7 windows error 1114 does anyone know what i can do to fix this problem? can i re-download itunes to fix it or will i lose my library if i try that?
-
Delete the existing sharepoint farm it is a development machinie and re create again in same server
Hi i want to delete the existing sharepoint farm it is a development machinie and re create again in same server. because i am facing issues to configure user profile service, the user profile syncronisation service starting and after some time it
-
How to get more power/capacity from my G5 2GHz DP, PPC?I own a fully max'd
I have a max'd out G5 Dual 2 GHz PPC w/2GB DDR SDRAM. Have 2 hard drives but are also max'd out - now effecting performance speed. I use the mac 99% for editing Video and Audio. Movies and files are stored on external HDs. If I am reading my specs ri
-
ResultSet.next() and resultset.islast() problem
I have query which returns 10 records. I run the using preparedStatement. When i use the while(resultSet.next()), the loop runs untill 10 records and after that when it come to the while check it hangs. Sample code pstmt= conn.prepareStatement(sql,Re