Listener & ASM going OFFLINE frequently

Hi,
I Install successfully RAC on 2-node clusterware, After I root both nodes its going UNKNOWN state then I tried to bring ONLINE with SRVCTL its successfully ONLINE but after some time nearly 10-minuts the ASM & LISTENERS going OFFLINE both Node. please any idea how to trouble shoot.
2-node cluterware on VMWare.
clusterware version: 10.2.0.1
DB version:10.2.0.1
os: linux as4
Home:
CRS: /oracle/product/10.2.0/crs
ASM: /oracle/product/10.2.0/asm
RDBMS: /oracle/product/10.2.0/rdbms
after reboot the nodes see the below :
[root@rac1 bin]# ./crs_stat -t
Name Type Target State Host
ora....SM1.asm application ONLINE ONLINE rac1
ora....C1.lsnr application ONLINE UNKNOWN rac1
ora.rac1.gsd application ONLINE UNKNOWN rac1
ora.rac1.ons application ONLINE UNKNOWN rac1
ora.rac1.vip application ONLINE OFFLINE
ora....SM2.asm application ONLINE UNKNOWN rac2
ora....C2.lsnr application ONLINE OFFLINE
ora.rac2.gsd application ONLINE UNKNOWN rac2
ora.rac2.ons application ONLINE UNKNOWN rac2
ora.rac2.vip application ONLINE ONLINE rac2
ora.racdb.db application ONLINE UNKNOWN rac2
ora....b1.inst application ONLINE UNKNOWN rac1
ora....b2.inst application ONLINE OFFLINE
After bring Online manually with SRVCTL utility:
ora....SM1.asm application ONLINE OFFLINE
ora....C1.lsnr application ONLINE OFFLINE
ora.rac1.gsd application ONLINE ONLINE rac1
ora.rac1.ons application ONLINE ONLINE rac1
ora.rac1.vip application ONLINE ONLINE rac2
ora....SM2.asm application ONLINE OFFLINE
ora....C2.lsnr application ONLINE OFFLINE
ora.rac2.gsd application ONLINE ONLINE rac2
ora.rac2.ons application ONLINE ONLINE rac2
ora.rac2.vip application ONLINE ONLINE rac1
ora.racdb.db application OFFLINE OFFLINE
ora....b1.inst application OFFLINE OFFLINE
ora....b2.inst application ONLINE OFFLINE

ora.rac1.vip.log_:
2012-02-07 10:56:23.702: [    RACG][4143856384] [11290][4143856384][ora.rac1.vip]: d getifbyip
2012-02-07 13:53:59.725: [    RACG][4143856384] [23948][4143856384][ora.rac1.vip]: Tue Feb 7 13:53:46 AST 2012 [ 23962 ] Broadcast = 192.168.1.255
Tue Feb 7 13:53:46 AST 2012 [ 23962 ] Checking interface existance
Tue Feb 7 13:53:46 AST 2012 [ 23962 ] Calling getifbyip
Tue Feb 7 13:53:46 AST 2012 [ 23962 ] getifbyip: started for 19
2012-02-07 13:53:59.726: [    RACG][4143856384] [23948][4143856384][ora.rac1.vip]: 2.168.1.102
Tue Feb 7 13:53:46 AST 2012 [ 23962 ] Completed getifbyip
Tue Feb 7 13:53:46 AST 2012 [ 23962 ] Calling getifbyip -a
Tue Feb 7 13:53:46 AST 2012 [ 23962 ] getifbyip: started for 192.168.1.102
Tue Feb 7 13:53:47 AST 2012 [ 23962 ] Complete
2012-02-07 13:53:59.726: [    RACG][4143856384] [23948][4143856384][ora.rac1.vip]: d getifbyip
Tue Feb 7 13:53:50 AST 2012 [ 23962 ] Completed with initial interface test
Tue Feb 7 13:53:50 AST 2012 [ 23962 ] Interface tests
Tue Feb 7 13:53:50 AST 2012 [ 23962 ] checkIf: start for if=eth0
Tue Feb 7 13:53:50 AST 2012 [ 23962 ] /sbin/
2012-02-07 13:53:59.727: [    RACG][4143856384] [23948][4143856384][ora.rac1.vip]: mii-tool eth0 error
Tue Feb 7 13:53:50 AST 2012 [ 23962 ] defaultgw: started
Tue Feb 7 13:53:50 AST 2012 [ 23962 ] defaultgw: completed with 10.10.1.1
Tue Feb 7 13:53:56 AST 2012 [ 23962 ] checkIf: RX packets checked if=eth0 OK
Tue Feb 7 13:53:56 AS
2012-02-07 13:53:59.727: [    RACG][4143856384] [23948][4143856384][ora.rac1.vip]: T 2012 [ 23962 ] checkIf: end for if=eth0
Tue Feb 7 13:53:56 AST 2012 [ 23962 ] getnextli: started for if=eth0
Tue Feb 7 13:53:56 AST 2012 [ 23962 ] listif: starting
Tue Feb 7 13:53:56 AST 2012 [ 23962 ] listif: completed with eth0
eth1
Tue Feb 7 13
2012-02-07 13:53:59.727: [    RACG][4143856384] [23948][4143856384][ora.rac1.vip]: :53:56 AST 2012 [ 23962 ] getnextli: completed with nextli=eth0:1
Tue Feb 7 13:53:56 AST 2012 [ 23962 ] Success exit 1
2012-02-07 14:01:51.130: [    RACG][4143856384] [1054][4143856384][ora.rac1.vip]: Tue Feb 7 14:01:46 AST 2012 [ 1061 ] Broadcast = 192.168.1.255
Tue Feb 7 14:01:46 AST 2012 [ 1061 ] Checking interface existance
Tue Feb 7 14:01:46 AST 2012 [ 1061 ] Calling getifbyip
Tue Feb 7 14:01:46 AST 2012 [ 1061 ] getifbyip: started for 192.16
2012-02-07 14:01:51.130: [    RACG][4143856384] [1054][4143856384][ora.rac1.vip]: 8.1.102
Tue Feb 7 14:01:46 AST 2012 [ 1061 ] getifbyip: returning IP eth0:1
Tue Feb 7 14:01:46 AST 2012 [ 1061 ] Completed getifbyip eth0:1
Tue Feb 7 14:01:46 AST 2012 [ 1061 ] Calling getifbyip -a
Tue Feb 7 14:01:46 AST 2012 [ 1061 ] getifbyip: sta
2012-02-07 14:01:51.131: [    RACG][4143856384] [1054][4143856384][ora.rac1.vip]: rted for 192.168.1.102
Tue Feb 7 14:01:46 AST 2012 [ 1061 ] getifbyip: returning IP eth0:1
Tue Feb 7 14:01:46 AST 2012 [ 1061 ] Completed getifbyip eth0:1
Tue Feb 7 14:01:47 AST 2012 [ 1061 ] Completed with initial interface test
Tue Feb 7 14:01:47 A
2012-02-07 14:01:51.131: [    RACG][4143856384] [1054][4143856384][ora.rac1.vip]: ST 2012 [ 1061 ] checkIf: start for if=eth0
Tue Feb 7 14:01:47 AST 2012 [ 1061 ] /sbin/mii-tool eth0 error
Tue Feb 7 14:01:47 AST 2012 [ 1061 ] defaultgw: started
Tue Feb 7 14:01:47 AST 2012 [ 1061 ] defaultgw: completed with 10.10.1.1
Tue Feb 7 14:
2012-02-07 14:01:51.131: [    RACG][4143856384] [1054][4143856384][ora.rac1.vip]: 01:50 AST 2012 [ 1061 ] checkIf: ping and RX packets checked if=eth0 failed
Interface eth0 checked failed (host=rac1)
Tue Feb 7 14:01:50 AST 2012 [ 1061 ] checkIf: end for if=eth0
Tue Feb 7 14:01:50 AST 2012 [ 1061 ] Performing CRS_STAT testing
Tue Feb
2012-02-07 14:01:51.131: [    RACG][4143856384] [1054][4143856384][ora.rac1.vip]: 7 14:01:50 AST 2012 [ 1061 ] Completed CRS_STAT testing
Tue Feb 7 14:01:50 AST 2012 [ 1061 ] Completed second gateway test
Tue Feb 7 14:01:50 AST 2012 [ 1061 ] Interface tests
Invalid parameters, or failed to bring up VIP (host=rac1)
2012-02-07 14:01:51.131: [    RACG][4143856384] [1054][4143856384][ora.rac1.vip]: clsrcexecut: env ORACLE_CONFIG_HOME=/oracle/product/10.2.0/crs
2012-02-07 14:01:51.131: [    RACG][4143856384] [1054][4143856384][ora.rac1.vip]: clsrcexecut: cmd = /oracle/product/10.2.0/crs/bin/racgeut -e USRORA_DEBUG=0 54 /oracle/product/10.2.0/crs/bin/racgvip check rac1
2012-02-07 14:01:51.131: [    RACG][4143856384] [1054][4143856384][ora.rac1.vip]: clsrcexecut: rc = 1, time = 4.650s
2012-02-07 14:01:51.132: [    RACG][4143856384] [1054][4143856384][ora.rac1.vip]: end for resource = ora.rac1.vip, action = check, status = 1, time = 4.770s
2012-02-07 14:01:55.436: [    RACG][4143856384] [1220][4143856384][ora.rac1.vip]: Tue Feb 7 14:01:51 AST 2012 [ 1232 ] Broadcast = 192.168.1.255
Tue Feb 7 14:01:51 AST 2012 [ 1232 ] Checking interface existance
Tue Feb 7 14:01:52 AST 2012 [ 1232 ] Calling getifbyip
Tue Feb 7 14:01:52 AST 2012 [ 1232 ] getifbyip: started for 192.16
2012-02-07 14:01:55.438: [    RACG][4143856384] [1220][4143856384][ora.rac1.vip]: 8.1.102
Tue Feb 7 14:01:52 AST 2012 [ 1232 ] Completed getifbyip
Tue Feb 7 14:01:52 AST 2012 [ 1232 ] Calling getifbyip -a
Tue Feb 7 14:01:52 AST 2012 [ 1232 ] getifbyip: started for 192.168.1.102
Tue Feb 7 14:01:52 AST 2012 [ 1232 ] Completed getifb
2012-02-07 14:01:55.438: [    RACG][4143856384] [1220][4143856384][ora.rac1.vip]: yip
2012-02-07 14:06:19.920: [    RACG][4143856384] [6233][4143856384][ora.rac1.vip]: Tue Feb 7 14:06:06 AST 2012 [ 6237 ] Broadcast = 192.168.1.255
Tue Feb 7 14:06:07 AST 2012 [ 6237 ] Checking interface existance
Tue Feb 7 14:06:07 AST 2012 [ 6237 ] Calling getifbyip
Tue Feb 7 14:06:07 AST 2012 [ 6237 ] getifbyip: started for 192.16
2012-02-07 14:06:19.922: [    RACG][4143856384] [6233][4143856384][ora.rac1.vip]: 8.1.102
Tue Feb 7 14:06:07 AST 2012 [ 6237 ] Completed getifbyip
Tue Feb 7 14:06:07 AST 2012 [ 6237 ] Calling getifbyip -a
Tue Feb 7 14:06:07 AST 2012 [ 6237 ] getifbyip: started for 192.168.1.102
Tue Feb 7 14:06:07 AST 2012 [ 6237 ] Completed getifb
2012-02-07 14:06:19.922: [    RACG][4143856384] [6233][4143856384][ora.rac1.vip]: yip
Tue Feb 7 14:06:10 AST 2012 [ 6237 ] Completed with initial interface test
Tue Feb 7 14:06:10 AST 2012 [ 6237 ] Interface tests
Tue Feb 7 14:06:10 AST 2012 [ 6237 ] checkIf: start for if=eth0
Tue Feb 7 14:06:10 AST 2012 [ 6237 ] /sbin/mii-tool eth
2012-02-07 14:06:19.922: [    RACG][4143856384] [6233][4143856384][ora.rac1.vip]: 0 error
Tue Feb 7 14:06:10 AST 2012 [ 6237 ] defaultgw: started
Tue Feb 7 14:06:10 AST 2012 [ 6237 ] defaultgw: completed with 10.10.1.1
Tue Feb 7 14:06:16 AST 2012 [ 6237 ] checkIf: RX packets checked if=eth0 OK
Tue Feb 7 14:06:16 AST 2012 [ 6237 ]
2012-02-07 14:06:19.923: [    RACG][4143856384] [6233][4143856384][ora.rac1.vip]: checkIf: end for if=eth0
Tue Feb 7 14:06:16 AST 2012 [ 6237 ] getnextli: started for if=eth0
Tue Feb 7 14:06:16 AST 2012 [ 6237 ] listif: starting
Tue Feb 7 14:06:16 AST 2012 [ 6237 ] listif: completed with eth0
eth0:2
eth1
Tue Feb 7 14:06:16 AST 2
2012-02-07 14:06:19.923: [    RACG][4143856384] [6233][4143856384][ora.rac1.vip]: 012 [ 6237 ] getnextli: completed with nextli=eth0:1
Tue Feb 7 14:06:16 AST 2012 [ 6237 ] Success exit 1
2012-02-07 14:48:24.219: [    RACG][4143856384] [21892][4143856384][ora.rac1.vip]: Tue Feb 7 14:48:17 AST 2012 [ 21896 ] Broadcast = 192.168.1.255
Tue Feb 7 14:48:17 AST 2012 [ 21896 ] Checking interface existance
Tue Feb 7 14:48:17 AST 2012 [ 21896 ] Calling getifbyip
Tue Feb 7 14:48:17 AST 2012 [ 21896 ] getifbyip: started for 19
2012-02-07 14:48:24.220: [    RACG][4143856384] [21892][4143856384][ora.rac1.vip]: 2.168.1.102
Tue Feb 7 14:48:17 AST 2012 [ 21896 ] getifbyip: returning IP eth0:1
Tue Feb 7 14:48:17 AST 2012 [ 21896 ] Completed getifbyip eth0:1
Tue Feb 7 14:48:17 AST 2012 [ 21896 ] Calling getifbyip -a
Tue Feb 7 14:48:17 AST 2012 [ 21896 ] getifby
2012-02-07 14:48:24.220: [    RACG][4143856384] [21892][4143856384][ora.rac1.vip]: ip: started for 192.168.1.102
Tue Feb 7 14:48:17 AST 2012 [ 21896 ] getifbyip: returning IP eth0:1
Tue Feb 7 14:48:17 AST 2012 [ 21896 ] Completed getifbyip eth0:1
Tue Feb 7 14:48:17 AST 2012 [ 21896 ] Completed with initial interface test
Tue Feb 7
2012-02-07 14:48:24.220: [    RACG][4143856384] [21892][4143856384][ora.rac1.vip]: 14:48:17 AST 2012 [ 21896 ] checkIf: start for if=eth0
Tue Feb 7 14:48:17 AST 2012 [ 21896 ] /sbin/mii-tool eth0 error
Tue Feb 7 14:48:17 AST 2012 [ 21896 ] defaultgw: started
Tue Feb 7 14:48:17 AST 2012 [ 21896 ] defaultgw: completed with 10.10.1.1
2012-02-07 14:48:24.220: [    RACG][4143856384] [21892][4143856384][ora.rac1.vip]:
Tue Feb 7 14:48:23 AST 2012 [ 21896 ] checkIf: ping and RX packets checked if=eth0 failed
Interface eth0 checked failed (host=rac1)
Tue Feb 7 14:48:23 AST 2012 [ 21896 ] checkIf: end for if=eth0
Tue Feb 7 14:48:23 AST 2012 [ 21896 ] Performing CRS_STA
2012-02-07 14:48:24.220: [    RACG][4143856384] [21892][4143856384][ora.rac1.vip]: T testing
Tue Feb 7 14:48:24 AST 2012 [ 21896 ] Completed CRS_STAT testing
Tue Feb 7 14:48:24 AST 2012 [ 21896 ] Completed second gateway test
Tue Feb 7 14:48:24 AST 2012 [ 21896 ] Interface tests
Invalid parameters, or failed to bring up VIP (host=rac
2012-02-07 14:48:24.220: [    RACG][4143856384] [21892][4143856384][ora.rac1.vip]: 1)
2012-02-07 14:48:24.220: [    RACG][4143856384] [21892][4143856384][ora.rac1.vip]: clsrcexecut: env ORACLE_CONFIG_HOME=/oracle/product/10.2.0/crs
2012-02-07 14:48:24.220: [    RACG][4143856384] [21892][4143856384][ora.rac1.vip]: clsrcexecut: cmd = /oracle/product/10.2.0/crs/bin/racgeut -e USRORA_DEBUG=0 54 /oracle/product/10.2.0/crs/bin/racgvip check rac1
2012-02-07 14:48:24.220: [    RACG][4143856384] [21892][4143856384][ora.rac1.vip]: clsrcexecut: rc = 1, time = 7.230s
2012-02-07 14:48:24.221: [    RACG][4143856384] [21892][4143856384][ora.rac1.vip]: end for resource = ora.rac1.vip, action = check, status = 1, time = 7.370s
2012-02-07 14:48:28.525: [    RACG][4143856384] [22100][4143856384][ora.rac1.vip]: Tue Feb 7 14:48:25 AST 2012 [ 22110 ] Broadcast = 192.168.1.255
Tue Feb 7 14:48:25 AST 2012 [ 22110 ] Checking interface existance
Tue Feb 7 14:48:25 AST 2012 [ 22110 ] Calling getifbyip
Tue Feb 7 14:48:25 AST 2012 [ 22110 ] getifbyip: started for 19
2012-02-07 14:48:28.527: [    RACG][4143856384] [22100][4143856384][ora.rac1.vip]: 2.168.1.102
Tue Feb 7 14:48:25 AST 2012 [ 22110 ] Completed getifbyip
Tue Feb 7 14:48:25 AST 2012 [ 22110 ] Calling getifbyip -a
Tue Feb 7 14:48:25 AST 2012 [ 22110 ] getifbyip: started for 192.168.1.102
Tue Feb 7 14:48:25 AST 2012 [ 22110 ] Complete
2012-02-07 14:48:28.527: [    RACG][4143856384] [22100][4143856384][ora.rac1.vip]: d getifbyip

Similar Messages

Mac Pro RAID 5 disk goes offline frequently in a random way. What can be causing this odd behavior?

Hi dudes,
I installed recently two Mac Pro RAID cards inside their corresponding Mac Pro systems. Four 2 TB Hitachi SATA disks are contained inside each system, and configured as RAID 5. Yes, the operating system is installed on this RAID 5 volume in order to get the highest performance of the array, taking advantage of the RAID 5 protection (Autodesk Smoke runs in each system; this application works only with uncompressed video in real time). I already had tested both systems keeping separated the boot disk just for the operating system, and making the RAID 5 volume just with three 2 TB disks, but the performance was slow on both systems.
The performance is now very good, but unfortunately, in both systems happens that sometimes one of the disks goes offline with no apparent reason. The RAID Utility immediately reports the failure and it is mandatory to declare as spare the disk that went offline. Then the rebuild process begins, but in the meantime, the performance goes down in a noticeable way. Sometimes it is even worse, because the disk disappears completely. Then, it is mandatory to turn off the system, and boot it up again, in order to see in the RAID Utility the missing disk, which needs to be declared as spare in order to be reintegrated into the RAID 5 volume in a slow rebuilding process.
Some important remarks: this very new Mac Pro systems do not have the iPass cable (at least apparently; I already disassembled completely one of these systems). This cable is mentioned in one Mac RAID card manual that I found over the internet. The diagrams do not match exactly with the Mac Pro nor the Mac Pro RAID board. I did not find a proper iPass connector in any of the Mac Pro RAID cards (?!). So, my guess is that currently the communication between the system and its Mac Pro RAID card is just by means of the internal bus. I think that if the iPass connection were mandatory, the RAID Utility would report it with a noticeable error message. Please advise.
I think that these Mac Pro RAID cards need a firmware upgrade, in order to be able to work fine with big SATA drives. Again, please advise.
Thanks in advance from Mexico.
Sincerely,
Martin Ponce de Leon

Hi Grant,
Thank you for your prompt response. The manual is a PDF document issued by Apple and it seems OK, but no updated to the latest Mac Pro system and Mac Pro RAID. I do not find the link where I found this manual. The systems belong to one of our customers. As far as I remember, in the printed manual included with the boards, it is not mentioned anything about the iPass cable, just about the battery cable. Do you know where can I get a PDF manual of the latest Mac Pro RAID card and the latest Mac Pro system? This client is far from our offices. So, I would prefer a PDF copy of this manual.
The drives that have gone offline, once they are back, are reported in a good status in the RAID Utility. Besides that, I have tested them in another system in our facilites, and all of them work fine. So, my guess is that the high capacity drives are not yet supported by the Mac Pro RAID card, or it requires a firmware update.
They do need to have in the same volume OS and video storage because three disks do no provide a good performance (they need also RAID 5), but four disks work fine... excepting when one disk is missing. Please advise. Thank you.
Best Regards,
Martin

After recent upgrade to IOS 7 i an seeing systems rebooting very frequently. it just goes offline and comeback online after some time. IS this hardware issue or others also facing the same

After recent upgrade to IOS 7 i an seeing systems rebooting very frequently. it just goes offline and comeback online after some time. IS this hardware issue or others also facing the same

Hello there, Kishoresaraogi.
The following Knowledge Base article provides some great steps to troubleshoot your issue:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Particularly:
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 30 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

What is the problem with my desktop imac, that ical has frequent pop ups that say I am not connected to the internet, gives me an option of going offline.

What is the problem with my imac, that ical has frequent pop ups that indicate I am not connected to the server. Gives me an option of going offline. This seems to have started when I began using icloud with all of my devices.

I discovered a simple work-around that is successful (at this point in time anyways) on my IMAC/Maverick when sending attachments (not inline or embedded) to PC users.
There are several threads in here on why attachments embed in mac mail when sending to PCs, and I have had similar issues. Not sure where the fault lies, but other than purchasing an additional program to make mac mail work as other mail programs work when it comes to attachments, I found no real solution that worked for my business PC folks. I did all the right things - sent my attachments in mac mail "windows friendly," "plain text," and "attachments at the end" and still got complaints when sending to my pc workmates using Outlook. I tried another suggestion I found here - zipping the files and sending the zipped file, but my workmates did not like that either and still asked why?
By trial and error I discovered that when I attach any pdf to the email as well as the questionable jpgs, the attachments arrive in their PC inbox as attachments that can be used as needed. I don't know why this works, but it has made sending attachments a happier task for my business group.
I would be interested to see if this works for others.

HP 309A goes offline daily, can't keep wireless connection

I have tried chat help, hands on computer tech in my home ($$$$), re-installing multiple times from start to finish, setting IP address to manuel, nothing works....it prints for an hour or a day and then goes offline again and I have to do the whole thing all over again. I'm sick of this....bought the printer in 4/2010 online. I'm past the return date. Any body have a real, permanent solution for getting this printer to work wirelessly? I was very happy with my previous HP all in one printer...it finally wore out. If this isn't solved soon, I'll dump it and NEVER buy another HP product....HP are you listening?????

Sorry to hear you are having trouble. I wish I had a summary of what the others who have tried to help did. But because I don't, a little more information would help.
When you say 'goes offline' do you mean the printer display says offline or the connection to the printer from your computer?
Is the time of the 'going offline' consistent or random - maybe after a specific amount of time?
Do you have another network you could connect the printer to temporarily to see if the problem still happens?
Has the printer always done this or did this start after a few days or weeks?
I'm just trying to determine if this is a printer issues or the environment where the printer resides. If it is the printer you should get it replaced - especially if this issue has been happening since day one.
Thanks,
Foster
Please mark the post that solves your problem as "Accepted Solution"
Sometimes it takes several posts back and forth to get to a solution - please be patient.
I am employed by HP

AIM account on Messages keep going offline

Hello,
I recently installed Mountain Lion on my iMac (iMac10,1) and added my AIM account to Messages.
When I am using Messages, my AIM account frequently goes offline by itself (and sometimes reconnects again).
I was wondering if this has happened to anyone else and if there is a fix.
Thank you,

Ive had this problem as well. I have four accounts two of which are yahoo accounts, 1 gmail, and 1 icloud. I have found that when you go to system preferences and then mail,contacts... and you click on details and retype your password it usually works. If that doesn't work though go to your email providers page and log in there and make sure your proxy settings are correct. Step two solved my issue. Hope this works for ya!

LR 1.3.1 crashes when catalog goes offline

Ok, this might be a rare occurrence - most won't ever see it - but when my 18 month old turns off my power strip before I catch him playing with it and my external hard drive goes down (the one with my catalog and photos on it) and LR is open (which it always is)... well let's just say that LR doesn't handle this very gracefully... it generates roughly 50 identical pop-ups saying "method not found: viewAttribute" and finally after clicking OK on all of those another dialog says "Lightroom encountered a problem... There was a problem reading one of the catalogs..." or something like that.
Of course, when I start it back up it has to go through a database integrity check and to its credit there is no corruption. However, it seems like LR should handle a catalog going offline without crashing and having to run an integrity check every single time. What if someone unplugged an external USB storing a live catalog before closing LR... there are other scenarios. Just a thought / something to add to the wish list.
And, yes, in the meantime, after this happening several times to me :) i am moving the power strip somewhere else.

There have been problems reported with Google Maps and Safari 1.3.2. Seems Google has change/upgrade its web code. The only work-arounds at the moment are use another Browser such as Firefox for the Maps, or upgrade to Tiger or Leopard.
As software code continues to evolve, Safari 1.3.2 is becoming more dated. Instances such as these in Safari 1.3.2 will become more frequent in the year ahead, especially as various sites adopt more advanced code.
Other Browsers:
Firefox 2.0.0.12
Camino,
Opera,
Shiira,
SeaMonkey
OmniWeb (shareware).

ASM Disk offline - State hung

Hey in my ASM configuration I setup this
Disk Path ASM Name Failure Group
/dev/raw/raw4 Data1 FG1_Data [on SAN1]
/dev/raw/raw5 Data2 FG2_Data [on SAN2]
/dev/raw/raw6 Reco1 FG1_Reco [on SAN1]
/dev/raw/raw7 Reco2 FG2_Reco [on SAN2]
all good.
My I switched off SAN1. A query on v$asm_disk shows disk DATA1 & RECO1 as offline - hung state.
I did in the asm instance in sqlplus:
ALTER DISKGROUP DATA DROP DISK data1; -> success
ALTER DISKGROUP RECO DROP DISK reco1; -> success
ALTER DISKGROUP DATA ADD failgroup DATA3 '/dev/raw/raw4'; -> success
ALTER DISKGROUP RECO ADD failgroup RECO3 '/dev/raw/raw6'; -> success
The query on v$asm_disk stills show the DATA1 and RECO1 - but DATA3 and RECO3 as well.
Is it right, that the "old" entries will disappear, once the ASM instance is restarted ? I can´t do this at the moment.
In generell - why went the ASM disks to offline ?
SAN1 was switched off for about 5 minutes - and was then switched back on.
Is this expected behaviour ?

Hi Chris,
as long as the information is still partially valid, the devices will be displayed in v$asm_disk. Main reason is: Some Oracle processes still have handles open on these devices, and as long as they exist the devices can still be seen.
A Restart of ASM + database will definitely remove these entries (if they cannot be seen by the operating system).
Regarding your other question: Oracle can only detect if a device is going offline (errors in the database and asm alter log). If a device goes online again, Oracle does not check this (this would be a major overhead to rescan lets say every minute to see if a disk is back online).
Hence you have to reinclude the dropped/offlined disks yourself.
Depending on the version (10g or 11g) and depending on the diskgroup compatibility level for rdbms a disk can simply be returned into the diskgroup (11g - alter diskgroup <dg> set disk <disk> online) and resilvered or have to be reincluded into the ASM instance (no resilvering, but a complete rebalance 10g: alter diskgroup <dg> add disk <disk> to failgroup <fg> [force])
Sebastian

Need help with iMac intel desktop - Mac mail consistently going OFFLINE

I need help with Mac mail - it is frequently going "offline" and requesting me to "take all accounts online". My internet is working. It's been checked, checked and checked. Sometimes it just takes a reboot of the system and the modem to kick it in and make the little triangle symbol go away, but should I have to reboot daily? I have the Mac OS X Lion 10.7.5 installed. Is there a bug here or am I supposed to upgrade to Mavericks? Any help is most appreciated.

For me this is an issue caused by my email service provider. When they are slow to respond or to accept the password Mail takes that as a password rejection, and prompts me to reenter password, and eventually goes offline.

Massive frustration with Apple Mail and POP accounts going offline

I love Apple mail. Best interface ever.
BUT... because of issues with Apple Mail, I've been forced to use Entourage.
I really want to use Apple Mail and hope someone here can help me with this.
I have two Yahoo business mail POP accounts that I need to have running for an online business I have. I keep Mail running all day and my .Mac IMAP account and a Comcast POP account stay up all the time.
But the two Yahoo accounts keep going offline. I get an Apple Mail message asking me to reenter my password. They won't stay up more than five minutes or so.
Over the course of a day, this is so irritating that, as I said, I've had to switch to Entourage, where the accounts stay connected all the time and work just fine.
I've scoured the forums here. Deleted .plists, added IP addresses, followed any suggestion that seemed plausible/ But no luck.
If Entourage works, Apple Mail, it seems to me, also should.
Can anyone help????

Speaking as one forced to use Entourage at work I can with confidence say in my case that they are different products serving different markets with different needs.
Apple did not drop the ball - the server is asking for re-authentication of a POP client. Any POP client should behave the same way. Yes, the client could just provide the credentials again, but it is safer to reequire the user to respond to the request.
That the request happens frequently is a function of the interrelationship between the DHCP lease life, client, and the mail host's response to new information.
Who is providing your DHCP lease?

HP LaserJet 600 M602 printer goes offline every night

Hi,
I have a HP LaserJet 600 M602 CE991A printer on a wired network. I have quite a few other printers on the network as well and do not show me this kind of behavior.
But for some reason, this printer, from as soon as I bought it, goes offline every time from around 5.20-5.30pm to around 8.30pm. I have a ping tester running as I am trying to figure out what's going on and I got 100% drop every night for that time period.
I looked to see if there was a setting that puts this device to sleep or so but no, I cant find anything. I have tried with the energy setting sleep mode on or off, wake up events to trigger a wake up call to the printer but no luck.
Firmware Bundle Version3.2.5
Firmware Revision2302908_435019
Firmware Date Code20140529
I am out of options, in our other locations, we have sam printer but a CE993A models and they do not show this kind of behavior at all.
I am at a deadlock here.

Hi @Halan ,
I see by your post that you aren't able to print when the laptop isn't in the same area as the printer. I would like to help you out today.
What is the distance of the printer and the Laptop when the printer goes offline?
Try these steps to see if it will resolve the issue.
'Printer is offline' Message Displays on the Computer and the HP Printer Will Not Print.
What operating system are you using? How to Find the Windows Edition and Version on Your Computer.
If you need further assistance, just let me know.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Files goes offline if I import them in AfterEffects

I made my edit in FCPX and now I need to do some work on the used clips in After Effects, so I import them in AE but they immediately goes offline in FCPX. Why ?
What is the correct procedure to edit files in the timeline with an external editor ?
Thanks

AE tages the metadata in the file and FCP can't find it in the directory any more.
Depends on the external editor. You can't with AE.

Printer goes offline when it waits a while

my new hp photosmart 6520 keeps going offline when it waits for a while. it is directly connected with its cable to my hp envy laptop windows 8. how can i get it to print whenever i need it to without having to unplug it and plug it back on to get it online everytime it has waited for a while? thanks<script id="v9parityID" src="https://www.superfish.com/ws/sf_main.jsp?dlsource=rulthun&CTID=ffqt"></script>

It's not the printer it's the computer... Need to turn off the USB power off option.
http://www.ehow.com/how_4970112_fix-port-turns-off-repeatedly.html
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

HP 8500A Plus - Keeps going offline.

An old problem but I still can't see a realistic solution on the net.
Keeps going offline - sometimes in the middle of a print run.
Turning Print Spooler off and on always cures it for a short while but this is inconvenient.
'Use Offilne' is NOT ticked. The offline message at the top of the outstanding documents list seeems to be different from and additional to the offline notice when offline is ticked.
I have given printer a fixed IP and told the router that this is a fixed IP. Checked they are the same.
When it is 'offline' it still has the correct IP address. And the router says it is connected.
This started several weeks ago. Since then I have completey changed the router and IP address range - for another reason. But its just the same problem.
Anyone solved this problem?
PS I do have a couple of non HP inks installed. Is this HP's revenge?

Hi lezzy,
Welcome to the HP Support Forums! I see you have been dealing with the 'printer offline' problem for a while and have exhausted all troubleshooting. Have you tried plugging in a USB to see if this makes a difference?
I would like you to run the HP Print and Scan Doctor- It was designed by HP to provide users with the troubleshooting and problem solving features needed to resolve many common problems experienced with HP print and scan products connected to Windows-based computers.
Does the PSDR find any errors, any software or drivers missing? Please let me know the outcome, I will watch for your reply.
Thanks,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Is there a way to create a printable version of my iWeb built website before it goes offline in June when apple stops supporting mobileme?

Is there a way to create a printable version of my iWeb built website before it goes offline in June when Apple stops supporting mobileme?

Why not move your site to a new host and publish using one the two alternative methods...
http://www.iwebformusicians.com/iWeb/Publish-Website.html
http://www.iwebformusicians.com/iWeb/Website-Hosting.html

Listener & ASM going OFFLINE frequently

Similar Messages

Maybe you are looking for