Listener disconnect auto after 2hours

Dear all i have oracle 10gR2 on windows 2003 server 32bit ..
the server is running welll the user are connected we have 180-220 session at a time . After some time within 2hours the listener disconnects atuomaticallay and the listener log show the following errors ..
TNS-12518: TNS:listener could not hand off client connection
TNS-12560: TNS:protocol adapter error
TNS-00530: Protocol adapter error
32-bit Windows Error: 233: Unknown error
the add the DIRECT_HANDOFF_TTC_LISTENER = OFF) in the listener.ora file but no impact
please help me in this regards..
waiting for your response...
thanks
lala

Dear Sir ,
my parameters are
pga_aggregate_target=800m
SQL> show parameter sga
NAME TYPE VALUE
lock_sga boolean FALSE
pre_page_sga boolean FALSE
sga_max_size big integer 2000M
sga_target big integer 1600M
and
select * from V$PGASTAT;
NAME VALUE UNIT
aggregate PGA target parameter 838860800 bytes
aggregate PGA auto target 687320064 bytes
global memory bound 104857600 bytes
total PGA inuse 76510208 bytes
total PGA allocated 179404800 bytes
maximum PGA allocated 292618240 bytes
total freeable PGA memory 0 bytes
process count 115
max processes count 120
PGA memory freed back to OS 0 bytes
total PGA used for auto workareas 852992 bytes
NAME VALUE UNIT
maximum PGA used for auto workareas 132502528 bytes
total PGA used for manual workareas 0 bytes
maximum PGA used for manual workareas 0 bytes
over allocation count 0
bytes processed 6021959680 bytes
extra bytes read/written 475557888 bytes
cache hit percentage 92.68 percent
recompute count (total) 418
19 rows selected.
RAM size 6GB
while in whindow 32bit
plesae help me

Similar Messages

Ipod disconnects immediately after being connected to computer

Every time I plug my iPod into my computer it says "Connecting" then it says "Ejecting" and then "OK to disconnect"! WHY????? It does not show up in the sidebar in iTunes, and it does not show up in My Computer.
I have plugged it into every USB port on my computer, none of them worked
I have already updated iTunes.
I have already put the iPod in disk mode.. that did NOTHING.
I know it's not a problem with my USB ports, because other devices work JUST FINE in them
I know it's not an issue with the USB cable because I plugged my iPod into another computer and my iPod did not disconnect right after being connected
PLEASE help me get my iPod to work on this computer. And I don't want answers telling me to use the other computer. My Library is on THIS computer. Not only that, iTunes doesn't even work on the other computer.

Reset the Bose device
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.

My second screen disconnects randomly after installing Yosemite. ¿Any suggestion?

My second screen disconnects randomly after installing Yosemite. ¿Any suggestion?

Hello Juanjeli,
Thanks for the question. Based on what you stated, it seems like you are having trouble using an external display. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
Apple computers: Troubleshooting issues with video on internal or external displays
Thanks for using Apple Support Communities.
Cheers,
Mario

TS1398 Hi. My wifi keeps disconnecting. I kkep turning the wifi on and off in settings but will disconnect again after a minute or so. I use an ipad2 and my ios is updated. How to troubleshoot? - kay peralta

Hi. My wifi keeps disconnecting. I keep turning the wifi on and off in settings but will disconnect again after a minute or so. I use an ipad2 and my ios is updated. How to troubleshoot? - kay peralta

Is this happening with one particular network or with all? Make sure iOS is updated on the device.
Try this:
Reboot ipad by pressing and holding both the home and sleep/wake buttons at the same time until the apple logo appears on the screen, then let go. Then try to connect to network.
Go to settings, Toggle airplane mode on/off. Make sure bluetooth is off. Turn on wif (airplane mode off). Try to connect.
Reset Network Settings
Go to settings/general/reset/reset network settings. Then try to connect to network.
If its your home router, then reboot router by unplugging for 5-10min. (do this while you're resetting network settings).
If problem persists, then check for firmware updates on your router.(you check router manufacturer support website for downloads and instructions).

My iphone4 disconnecting calls after 3 rings and show these calls as "missed calls" while the person who calls me still hear a dial ring. this started to happend after i upgraded to ios 7.0.4 please advise

my iphone4 disconnecting calls after 3 rings and show these calls as "missed calls" while the person who calls me still hear a dial ring. this started to happend after i upgraded to ios 7.0.4 please advise
this is really frustrating since i cant pick up calls with only 3 rings and i always miss them
i tried to restore like 3-4 times, didnt help
even tried to set the iphone as a "new iphone" on itunes and it didnt help

Generally, when going out of the country and using a foreign SIM, carrier files can be changed. Go to Settings>General>About>and look at Carrier? What does it say? You may have to perform a restore. You can try a restore from a backup, that would reinstall the iOS, and would provide the latest AT&T carrier file as well. See if this will fix the problem.

I am a proud owner of iphone5, iOS6.1.4, recently I am facing prob to connect it with Ford Figo. Its not that iphone is not connecting, its getting disconnecting immediately after connected. I hv tired other ph with car, its working fine, how 2 resolve ?

I am a proud owner of iphone5, iOS6.1.4, recently I am facing prob to connect it with Ford Figo. Its not that iphone is not connecting, its getting disconnecting immediately after connected. I hv tired other ph with same car, its working fine, how 2 resolve ?

Morning Indrajit Chatterjee,
Thanks for using Apple Support Communities.
For more information on this, take a look at this article:
iOS: Troubleshooting car stereo connections
http://support.apple.com/kb/TS3581
Best of luck,
Mario

How to process idoc auto after material creation

i have some requirement in idoc,
the idoc should be process auto after creating material using mm01,
after creating material using mm01 it should be transfer to receiver system using idoc,
please help me out
thanks in advance

Hi,
This is a generic question and you should check first ALE configuration guide.
Further on the you need to configure the IDOC sending mode in the partner profiles ( WE20) - Message type.
Example screen shot>
Thanks,
Kiran

Remote system disconnected after installing MAX 4.7.3

Hello!
This topic is related to the topic you can find here.
In order to repair the Regional Settings issue in Windows (XP in my case) I used the System Configuration 1.1.3 update and it seems to work. I changed the Regional Settings to my local and installed the update. Silverlight does not crash anymore, so that is fixed. However, this created a new issue:
Now my remote devices (NI-1742 and NI-1746) status is always "disconnected". The devices are connected to a different subnet than the development computer. Pinging their IPs showed that they are there. I can connect to the cameras using the Real-time Project. However, in MAX the remote system status remains "disconnected". I tried to delete and re-create the devices in MAX but that did not work either.
I also tried the latter with Windows firewall on and off and updated the software with NI Update Service. On an another computer, which has not had the update yet, I can connect to and modify the devices.
In addition, I completely reinstalled the development system, but the issue persists.
Kind regards,
Mart
Solved!
Go to Solution.

Hey Mart,
It looks like this may be related to a possible bug introduced in MAX 4.7.3. I've uploaded Juurma.zip to our FTP site. Please obtain this .zip file by navigating to ftp://ftp.ni.com/outgoing.
This .zip file contains a patched version of mxRmCfg.dll. First, close all NI software and stop the NI System Web Server service and all its dependencies (you can get to your services by going to Start->Run and typing in services.msc). Then, navigate to this directory: C:\Program Files\National Instruments\Shared\MAX\Bin
You will need to rename the existing mxRmCfg.dll to mxRmCfg.bak, and copy the new version to that location. Restart your system, open MAX, and see if you can connect to and view your targets.
If this resolves your issue, PLEASE post back in this thread indicating as much. If not, let us know and we'll continue to investigate. Note that items on our FTP server will be removed after 48 hours, so let me know if you're unable to get that file in time
Justin E
National Instruments R&D

Listener & grid control after upgrade to 11.1.0.7

going from 10.2.0.2 to 11.1.0.7 on aix 5.3
On our test server we have about 8 databases that are all currently using the 10.2 listener. I've upgraded one of our very basic test databases to 11g this morning, and for the time being just created a new listener11g that listens to different port. when I start it, the log file is being created in ORACLE_BASE/diag/tnslsnr/<server>/<lsnrname>/alert/ instead of the default ORACLE_HOME/network/logs I didn't tell it to create the listener log there, anyone else have this issue?
Also, my databases are all currently being monitored by OEM Grid Control and NOT DB Control. What steps should I take to get that running correctly again after the upgrade? Delete the target database and add it back after the upgrade? Sorry ahead of time if there is a meta-link doc for this, I've searched briefly and came up empty handed.
Thanks,
Ben Alvey

well, from what I read about the ADR architecture it wasn't clear that the listener log would move. the metalink documents for the listener log still state that the default log directory is ORACLE_HOME/network/log as well.
And seeing how I supplied a different value for diagnostic_dest during the upgrade of said database it didn't make much sense to me how it came to the decision to stick it where it did. I'd say it is using the value from $ORACLE_BASE during the install.
It would be helpful if their docs didn't contradict themselves constantly.

USB device keeps disconnecting/connecting after upgrading to Windows 8.1

I have a device(Pedal for Sim Racing) connected via USB, everything is working fine in Windows 7 and 8 but after upgrading my machine to Windows 8.1 the device keeps disconnecting and connecting for like every 2 seconds. But after I open the Property Sheet
in Game Controllers panel the disconnection issue was gone, if I reconnect the device the issue persist. Other people who have similar device also encounters the same issue after upgrading to windows 8.1. The issue persist with or without the device driver
installed.
Any idea, what might cause this?
Best regards
mark

I'v got this exact same problem with my Win 7 desktop. I've also got pedals and wheel but don't see it as different than all the other USB devices. I'm using a bunch of USB, but no hubs, including 3 external storage hard drives. But the momentary
disconnect appears in all devices as best as i can see..even my long time trouble free head phones..keyboard..and all. Sometimes the sound goes away and if I unplug and replug them the sound comes back, and other times I have to exit and re enter the
game. I also get video crashes ..maybe not related.IDK..and have to restart all, because I've got three black screens in Eyefinity. For years my system was trouble free and its just slowly started getting worse. I've thought it had to do with system "sleep"
etc but long ago went to never sleep max performance etc..Makes no difference. Keep thinking its my hardware or my house wiring etc..But can't seem to solve it. I replaced my Mobo/chip/ram maybe 6 months ago and that appears to have not helped. It seems
to be getting worse. I hate to start replacing parts piece by piece..cost a lot of money and sometimes doesn't help.
When I'm playing a game I can often hear "faint" sound of USB connect disconnect happening with regularity..that little bing/boink sound etc..So it must just be constantly happening...Seems weird. Didn't have anything like this happening years
ago with pretty much the same hardware and same Win7 with the continuing updates etc.
What can be causing this common problem?

How to make use of Listener to auto refresh items in SelectOneMenu

Hi,
I have a transaction jsp page that make use of the SelectOneMenu of which the Selectitems for example consists of all the item_code are added to the dropdownitems through the sessionBean1 ArrayList.
The problem started when new item_code are being added to the SQL tables using other JSP that allow user to input new item code.
JSF transaction page using SelectOneMenu could not effectively updated the options to include and reflect the new item subsequently added simply because the page has been rendered to the user .
I believe using some sort of listener , whenever any action or event took place , JSP that are having the particular UI components being rendered could be auto refresh at the client side of JSP html page.
Could anyone provide some hints?
Thank

Hi,
Thank for the suggestion,
In fact I am looking for two possiblity on how to overcome this sort of issues,
Firstly , if the JSF page has not been rendered , you could always make use of the sessionbean1 to do the job , for example if you add a new item to the selectOneMenu dropitems, you could make use of this method to update the list of items in the dropitems , though it would always be the last items on the sorted list .
Secondly , using some sort of autorefresh to push to the client to inform the user that new item have been added , advise them to manual refresh the page.
I am in fact using the first method to add new item to the dropdownmenu for those JSP that involve page forwarding and redirect such as shopping basket / cart beans .
My concern is when displaying the list of real-time shopping items available to the user , method 1 would not work at all , simply because JSF page was already rendered to the user browser, only beaming alerting message seems to be able to overcome such shortcoming when scenario demand realtime.
Thank

Update in disconnection document after reversal of demounted device by EG53

Hi everybody,
I have an issue reagardig diconnection document update. For instance if i make a device removal EG32 in a disconnected installation, the status of the disconnection document it is update with status 24 or 27.
So far so good, but if i make the reversal of the demounted device with EG53, the status of the disconection document remains 24 or 27 (no update to 21).
This is no good for the next steps in reconnection, because the device shows like iti is demounted, but in fact it is installed.
Please, a solution,
Thank you,

Hi Olivia,
Thank you for your reply, but this is not a solution, because the users uses EG53 for a year, and by the way EG50 doesn`t work - The status of the device doesn`t allow it.
The scenario it is like this:
1. He use EG32 to demount a meter - this will change the status of the disc, document to 27.
2. He use EG53 to reverse the demounted meter - this it is not related to the disc doc to change it to 21.
This is my problem because the disc document after EG53 remains in status 27.
And if we look at the device this is installed.
Thank you,
KR

Service for listener can start after change ip of machine

Hi,
I have installed Oracle 10g, which installation was done from the other person which is not part of the team, my experience with Oracle is little.
We executing our automation tests on Vshere machine and our sysadmin had to change to a new hardware and after this move to change IP of the machine.
On a machine it has installed microsoft loopback adaptor, also in host files are added iP 10.10.10.10 host of the machine with domain and only host name.
in tnsnames.ora are used host names no IP addresses. After change of IP i loads first page and when i have tried to login in Enterprize manager can't open next page.
I checked windows services and i found that oracle listener was stopped when i have tried to started it shows this error: "The nameof listner service on Local computer started and stopped. Some services stop automaticly if they are not use by other services or programs", Oracle Fulfillment Server failed with the same error when i have tried to start this service. Also OracleConcMgr raise error whrn i have tried to run service with this error 1067: The process terminated unexpetedly
I ewxecuted command lsnrctl status
LSNRCTL for 32-bit Windows: Version 10.1.0.5.0 - Production on 25-JUN-2012 14:53
:45
Copyright (c) 1991, 2004, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=tcp)(PORT=1521))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 10.1.0.5.0 - Produ
ction
Start Date 25-JUN-2012 14:01:09
Uptime 0 days 0 hr. 52 min. 38 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File C:\oracle\PROD\inst\apps\PROD_\ora\10.1.
2\network\admin\listener.ora
Listener Log File C:\oracle\PROD\apps\tech_st\10.1.2\network\log\listene
r.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=hostname)(PORT=
1521)))
The listener supports no services
The command completed successfully
Thanks in advance if you can help me. if you need more info write me

Solution:
I secured Enterprise Mangager (HTTPS, emctl secure...).
First, I must unsecure EM-Console, run "chgiphost.sh -mid" and then re-secure EM-Console.
Look at: Metalink - Note 280034.1 How to Secure and Unsecure the AS Control 10g Console
regards
Harald.

Oracle 10g Listener Port Changes after every Restart

Hi All,
I have installed Oracle10g in my Laptop and was working fine till last week, but now when I start the Listener, it is starting with different port number other than the default port 1521. ( For example first time Listener started with port number 3110, then after restarting the Listener it becomes 3313, and so on) That means server is assigning different port numbers on every time when the listener starts.
Because of this I am not able to connect to the database.
How to make the Listener port as default 1521 permenantly.
Please help.
Regards

Hi,
Can you please check the listener.ora file? Do you have the port number
mentioned as 1521 as below:
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(ADDRESS = (PROTOCOL = TCP)(HOST = my_server_name_fully_qualified)(PORT = 1521))
Regards,
Chandan

10g listener cannot start after install 11g

Hi,
I install 11g R2 into one of 10g windows 2003 server, but I did not perform upgrade, I want the 11g coexists with 10g.
But after I install 11g and create a new 11g instance, I found that the listener cannot be started, until I change the environment variable ORACLE_HOME
of windows to 11g home directory.
But when I reboot my server, I found that the old 10g listener cannot be started,
the services cannot be started and if I try to start the listener in command "lsnrctl start", error TNS-12560: TNS:protocol adapter error prompt.
So I changed the ORACLE_HOME environment variable to 10g home directory again and the listener can be started.
And when I want to start 11g listener, I will have to change again the ORACLE_HOME environment variable to 11g home directory.
Is this a normal behaviour to have 11g and 10g co-exists in one server?
Thanks
Vincent

pj**** wrote:
Hi,
I install 11g R2 into one of 10g windows 2003 server, but I did not perform upgrade, I want the 11g coexists with 10g.
But after I install 11g and create a new 11g instance, I found that the listener cannot be started, until I change the environment variable ORACLE_HOME
of windows to 11g home directory.
But when I reboot my server, I found that the old 10g listener cannot be started,
the services cannot be started and if I try to start the listener in command "lsnrctl start", error TNS-12560: TNS:protocol adapter error prompt.
So I changed the ORACLE_HOME environment variable to 10g home directory again and the listener can be started.
And when I want to start 11g listener, I will have to change again the ORACLE_HOME environment variable to 11g home directory.
Is this a normal behaviour to have 11g and 10g co-exists in one server?
Thanks
Vincentonly 1 listener is needed on any DB Server & the listener should be for the highest version of Oracle DB Server

Listener disconnect auto after 2hours

Similar Messages

Maybe you are looking for