Listener Error "TNS-01189: The listener could not authenticate the user"

Good morning. We have a dual-homed (one home is 10.2.0.4 and the other is 10.2.0.5) server running a 10.2.0.5 listener. We accidentally applied the April2011 PSU to the 10.2.0.5 home without shutting down the listener. The PSU installed correctly but the listener now gives the error "TNS-01189: The listener could not authenticate the user" when any attempt is made to run the following lsnrctl commands: reload, stop, services, and status. When the start command is issued, it informs us the listener is already running (which is correct). The listener is working properly handing off database connections but we cannot administer it.
Would installing the PSU while the listener was running cause this problem? Any idea on how to reload the listener? We even went so far as to deinstall 10.2.0.5 on the server and reinstall it with a clean cloned copy of 10.2.0.5. We also tried to create a new listener (which it did) but would not start the new listener. It said one listener was already running.
From EM Grid Control, we can administer the listener (make basic changes to the listener.ora file) but we cannot stop the listener from EM Grid Control either. (Not a surprise.)
Ideas? Thoughts?
Server: Solaris 64-bit

+>lsnrctl status listener+
LSNRCTL for Solaris: Version 10.2.0.5.0 - Production on 27-APR-2011 08:23:43
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=TCP)(HOST=prodserv)(PORT=1521))
TNS-01189: The listener could not authenticate the user
I have read the Metalink doc (Doc ID 285439.1) and it seems like the two homes are causing some type of conflict. I am just not sure how to resolve the issue. I tried unsetting ORACLE_HOME in both 10.2.0.4 and 10.2.0.5 SID environments. The error I get then is the basic TNANAMES error. That sequence looks like this:
+>unset ORACLE_HOME+
+>echo $ORACLE_HOME+
+>lsnrctl status+
LSNRCTL for Solaris: Version 10.2.0.5.0 - Production on 27-APR-2011 08:28:27
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Message 1053 not found; No message file for product=network, facility=TNSTNS-01189: Message 1189 not found; No message file for product=network, facility=TNS
Am I not clearing out the ORACLE_HOME properly (as suggested in the Metalink doc)?

Similar Messages

The workflow could not update the item, possibly because one or more columns for the item require a different type of information. Outcome: Unknown Error

Received this error (The workflow could not update the item, possibly because one or more columns for the item require a different type of information.) recently on a workflow that was
working fine and no changes were made to the workflow.
I have tried a few suggestions, i.e. adding a pause before any ‘Update’ action (which didn’t help because the workflow past this action without incident); checked the data type being written
to the fields (the correct data types are being written); and we even checked the list schema to ensure the list names and the internal names are aligned (they
are), but we still cannot figure out why the workflow is still throwing this error.
We located the area within the workflow step where it is failing and we inserted a logging action to determine if the workflow would execute the logging action but it did not, but wrote the same error message.
The workflow is a Reusable Approval workflow designed in SharePoint Designer 2010 and attached to a content type.
The form associated with the list was modified in InfoPath 2010.
Approvers would provide their approval in the InfoPath form which is then read by the workflow.
Side note - items created after the workflow throws this Unknown Error some seem to be working fine.
We have deleted the item in question and re-added it with no effect.
Based on what we were able to determine there don’t seem to be any consistency with how this issue is behaving.
Any suggestions on how to further investigate this issue in order to find the root cause would be greatly appreciated?
Cheers

Hi,
I understand that the reusable workflow doesn’t work properly now. Have you tried to remove the Update list item action to see whether the workflow can run without issue?
If the workflow runs perfectly when the Update list item action is removed, then you need to check whether there are errors in the update action. Check whether the values have been changed.
Thanks,
Entan Ming
Entan Ming
TechNet Community Support

HT1414 I just got a replacement iPhone 5 (64MB) for one with a cracked face, and tried to restore it. Got an error message saying the iTunes could not restore the iPhone because not enough free space is available on the iPhone. Now what?

I just replaced my iPhone 5 because of a cracked face. I backed up the old phone to iTunes. When I tried to restore my data off of iTunes to the new phone, I got an error message saying that iTunes could not restore the iPhone because not enough free space is available on the new iPhone. Now what?
I have Apple Care+, but I'll be darned if I can find any way to contact anyone at Apple to talk to about this. They take your money, but make darned sure they don't have to support you unless you jump through a bunch of hoops first, like this site.

I've done a restore.. The phone was completely wiped back to factory settings.. It then tells me there isn't enough space on the phone to restore from back up? How when the phone is empty?!

I get an error message when downloading ITunes :could not access the network location %public%\desktop\

I get an error message when downloading ITunes "could not access the network location" %public%\desktop\?
windows vista 32 bit

Try the following user tip:
"Could not access network location %PUBLIC%\Desktop\" install errors

FF not connecting to web- This "Network Connections" message pops up: Error 623: The system could not find the phone book entry for this connection. Any ideas?

About a month ago I could no longer connect to the internet on our PC. Every time I clicked on the Firefox icon the Netscape sign-on window would pop up. I would try to close it but it would pop up over and over again. If I tried to close it a dozen or so times eventually Firefox would open up but it would never connect. Just today I moved my Netscape file to the recycle bin. No longer does the Netscape sign-on window pop up but following Network Connection error message pops up: "Error 623: The system could not find the phone book entry for this connection".. This error window behaves the same way the Netscape sign-on window used to behave. Every time I click to close it it pops open again. After numerous clicks Firefox opens up but it never connects.

Do you have this error message on a Mac computer or on a Windows computer?
I've only seen this error mentioned on a Windows computer.
*http://kb.mozillazine.org/Autoconnect

I wanted a solution to the problem I was having on Win 7 Pro Service Pack 1 in that links on an open Adobe Acrobat file will not open in my Firefox Browser 33.0.2. The Error I receive is "Acrobat could not run the web browser. Unknown Error. (123)"

I want a solution to the problem I was having on Win 7 Pro Service Pack 1 in that links on an open Adobe Acrobat Pro 10.1.12 file will not open in my Firefox Browser 33.0.2. The Error I receive is "Acrobat could not run the web browser. Unknown Error. (123)"

Change browsers. See what happens.
Be well...

Newsfeed error - The operation failed because the server could not access the distributed cache.

Recently installed SharePoint 2013 RTM, on the newsfeed page an error is displayed, and no entries display in the following or everyone tabs.
"The operation failed because the server could not access the distributed cache."
Reading through various posts, I've checked:
- Activity feeds and mentions tabs are working as expected.
- User Profile Service is operational and syncing as expected
- Search is operational and indexing as expected
- The farm was installed based on the autospinstaller scripts.
- Don't believe this to be a permissions issue, during testing added accounts to the admin group to verify
Any suggestions are welcomed, thanks.
The full error message and trace logs is as follows.
SharePoint returned the following error: The operation failed because the server could not access the distributed cache. Internal type name: Microsoft.Office.Server.Microfeed.MicrofeedException. Internal error code: 55. Contact your system administrator
for help in resolving this problem.
From the trace logs there's several messages which are triggered around the same time:
http://msdn.microsoft.com/en-AU/library/System.ServiceModel.Diagnostics.TraceHandledException.aspxHandling an exception. Exception details: System.ServiceModel.FaultException`1[Microsoft.Office.Server.UserProfiles.FeedCacheFault]: Unexpected exception in
FeedCacheService.GetPublishedFeed: Object reference not set to an instance of an object.. (Fault Detail is equal to Microsoft.Office.Server.UserProfiles.FeedCacheFault)./LM/W3SVC/2/ROOT/d71732192b0d4afdad17084e8214321e-1-129962393079894191System.ServiceModel.FaultException`1[[Microsoft.Office.Server.UserProfiles.FeedCacheFault,
Microsoft.Office.Server.UserProfiles, Version=15.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c]], System.ServiceModel, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089Unexpected exception in FeedCacheService.GetPublishedFeed: Object
reference not set to an instance of an object..
at Microsoft.Office.Server.UserProfiles.FeedCacheService.Microsoft.Office.Server.UserProfiles.IFeedCacheService.GetPublishedFeed(FeedCacheRetrievalEntity fcTargetEntity, FeedCacheRetrievalEntity fcViewingEntity, FeedCacheRetrievalOptions fcRetOptions)
at SyncInvokeGetPublishedFeed(Object , Object[] , Object[] )
at System.ServiceModel.Dispatcher.SyncMethodInvoker.Invoke(Object instance, Object[] inputs, Object[]& outputs)
at System.ServiceModel.Dispatcher.DispatchOperationRuntime.InvokeBegin(MessageRpc& rpc)
at System.ServiceModel.Dispatcher.ImmutableDispatchRuntime.ProcessMessage5(MessageRpc& rpc)
at System.ServiceModel.Dispatcher.ImmutableDispatchRuntime.ProcessMessage31(MessageRpc& rpc)
at System.ServiceModel.Dispatcher.MessageRpc.Process(Boolean isOperationContextSet)System.ServiceModel.FaultException`1[Microsoft.Office.Server.UserProfiles.FeedCacheFault]: Unexpected exception in FeedCacheService.GetPublishedFeed: Object reference not
set to an instance of an object.. (Fault Detail is equal to Microsoft.Office.Server.UserProfiles.FeedCacheFault).
SPSocialFeedManager.GetFeed: Exception: Microsoft.Office.Server.Microfeed.MicrofeedException: ServerErrorFetchingConsolidatedFeed : ( Unexpected exception in FeedCacheService.GetPublishedFeed: Object reference not set to an instance of an object.. ) : Correlation
ID:db6ddc9b-8d2e-906e-db86-77e4c9fab08f : Date and Time : 31/10/2012 1:40:20 PM
at Microsoft.Office.Server.Microfeed.SPMicrofeedThreadCollection.PopulateConsolidated(SPMicrofeedRetrievalOptions retOptions, SPMicrofeedContext context)
at Microsoft.Office.Server.Microfeed.SPMicrofeedThreadCollection.Populate(SPMicrofeedRetrievalOptions retrievalOptions, SPMicrofeedContext context)
at Microsoft.Office.Server.Microfeed.SPMicrofeedManager.CommonGetFeedFor(SPMicrofeedRetrievalOptions retrievalOptions)
at Microsoft.Office.Server.Microfeed.SPMicrofeedManager.CommonPubFeedGetter(SPMicrofeedRetrievalOptions feedOptions, MicrofeedPublishedFeedType feedType, Boolean publicView)
at Microsoft.Office.Server.Microfeed.SPMicrofeedManager.GetPublishedFeed(String feedOwner, SPMicrofeedRetrievalOptions feedOptions, MicrofeedPublishedFeedType typeOfPubFeed)
at Microsoft.Office.Server.Social.SPSocialFeedManager.Microsoft.Office.Server.Social.ISocialFeedManagerProxy.ProxyGetFeed(SPSocialFeedType type, SPSocialFeedOptions options)
at Microsoft.Office.Server.Social.SPSocialFeedManager.<>c__DisplayClass4b`1.<S2SInvoke>b__4a()
Microsoft.Office.Server.Social.SPSocialFeedManager.GetFeed: Microsoft.Office.Server.Microfeed.MicrofeedException: ServerErrorFetchingConsolidatedFeed : ( Unexpected exception in FeedCacheService.GetPublishedFeed: Object reference not set to an instance of
an object.. ) : Correlation ID:db6ddc9b-8d2e-906e-db86-77e4c9fab08f : Date and Time : 31/10/2012 1:40:20 PM
at Microsoft.Office.Server.Microfeed.SPMicrofeedThreadCollection.PopulateConsolidated(SPMicrofeedRetrievalOptions retOptions, SPMicrofeedContext context)
at Microsoft.Office.Server.Microfeed.SPMicrofeedThreadCollection.Populate(SPMicrofeedRetrievalOptions retrievalOptions, SPMicrofeedContext context)
at Microsoft.Office.Server.Microfeed.SPMicrofeedManager.CommonGetFeedFor(SPMicrofeedRetrievalOptions retrievalOptions)
at Microsoft.Office.Server.Microfeed.SPMicrofeedManager.CommonPubFeedGetter(SPMicrofeedRetrievalOptions feedOptions, MicrofeedPublishedFeedType feedType, Boolean publicView)
at Microsoft.Office.Server.Microfeed.SPMicrofeedManager.GetPublishedFeed(String feedOwner, SPMicrofeedRetrievalOptions feedOptions, MicrofeedPublishedFeedType typeOfPubFeed)
at Microsoft.Office.Server.Social.SPSocialFeedManager.Microsoft.Office.Server.Social.ISocialFeedManagerProxy.ProxyGetFeed(SPSocialFeedType type, SPSocialFeedOptions options)
at Microsoft.Office.Server.Social.SPSocialFeedManager.<>c__DisplayClass4b`1.<S2SInvoke>b__4a()
at Microsoft.Office.Server.Social.SPSocialUtil.InvokeWithExceptionTranslation[T](ISocialOperationManager target, String name, Func`1 func)
Microsoft.Office.Server.Social.SPSocialFeedManager.GetFeed: Microsoft.Office.Server.Social.SPSocialException: The operation failed because the server could not access the distributed cache. Internal type name: Microsoft.Office.Server.Microfeed.MicrofeedException.
Internal error code: 55.
at Microsoft.Office.Server.Social.SPSocialUtil.TryTranslateExceptionAndThrow(Exception exception)
at Microsoft.Office.Server.Social.SPSocialUtil.InvokeWithExceptionTranslation[T](ISocialOperationManager target, String name, Func`1 func)
at Microsoft.Office.Server.Social.SPSocialFeedManager.<>c__DisplayClass48`1.<S2SInvoke>b__47()
at Microsoft.Office.Server.Social.SPSocialUtil.InvokeWithExceptionTranslation[T](ISocialOperationManager target, String name, Func`1 func)

Thanks Thuan,
I've restarted to the Distrubiton Cache servicem and the error is still occuring.
The AppFabric Caching Service is running under the service apps account, and does appear operational based on:
> use-cachecluster
> get-cache
CacheName            [Host]
                     Regions
default
DistributedAccessCache_1e9f4999-0187-40e8-aa92-f8308d47d6e9
DistributedActivityFeedCache_1e9f4999-0187-40e8-aa92-f8308d47d6e9
DistributedActivityF [SERVER:22233]
eedLMTCache_1e9f4999 LMT(Primary)
-0187-40e8-aa92-f830
8d47d6e9
DistributedBouncerCache_1e9f4999-0187-40e8-aa92-f8308d47d6e9
DistributedDefaultCache_1e9f4999-0187-40e8-aa92-f8308d47d6e9
DistributedLogonToke [SERVER:22233]
nCache_1e9f4999-0187 Default_Region_0538(Primary)
-40e8-aa92-f8308d47d Default_Region_0004(Primary)
6e9                  Default_Region_0451(Primary)
DistributedSearchCache_1e9f4999-0187-40e8-aa92-f8308d47d6e9
DistributedSecurityTrimmingCache_1e9f4999-0187-40e8-aa92-f8308d47d6e9
DistributedServerToAppServerAccessTokenCache_1e9f4999-0187-40e8-aa92-f8308d47d6e9

"Could not authenticate the specified user" error in HFM 9.2.1

Hi,
I'm installing Hyperion 9.2.1, and I have installed and configured shared service and hfm successfully, but when I failed to create hfm application.
The reproduce step is:
1. login http://hostname/hfm/Home/LaunchPage.asp, with admin/password
2. click a cluster, and click "create applcation", it failed with error:
Could not authenticate the specified user. %0
Error Reference Number: {184D6C1E-94C5-4722-93B0-15D88871485B}
And error in the log file is:
ERROR Authentication not found user appqa-vm05\admin 。
com.hyperion.hfm.security.CASSecurityException: not found user appqa-vm05\admin。
at com.hyperion.hfm.security.Authentication.AuthenticateUserInternal(Unknown Source)
at com.hyperion.hfm.security.Authentication.AuthenticateUserAndGetInfo(Unknown Source)
Have you ever met this issue?
Thanks,
Xinying

Hi J,
Thanks for your response.
<<1. The user with you are logging in HFM is used for configuring HFM
My OS is windows 2003 server, I installed and ran configurator of shared service and hfm with the OS user "administrator".
And I can login shared service with "administrator", but I met issue when creating hfm application. Also can login hfm" with admin/password" , but has same issue for creating application. Seems user is not checked when loging hfm.
<<2. This user is able to log on to Shared Services and is provisioned for creating HFM application
I can login shared service with user "admin/password".
But when clicking "provision" for user "admin", I can only find "shared service" role, no any hfm role.
user "administrator"
<<3. This user is used in Server and web configuration of HFM
In server and web configuration, I set the DCOM domain user as: hostname\administrator
In my setup, two users are used,
1st one is OS user: administrator
2nd user is: admin ( seems it is the default user after installation and configuration of Shared service?)
Thanks,
Xinying

Error "The application could not execute the required function"

Hi All,
When I try to activate the DTP the following error occurs."the application could not execute the required function".
I was able to activate the DTP for the same DataSource 2 days back but now I am unable to activate .
Kindly suggest what could be the possible reason for the same.
Regards,
Santosh Mani

If you have transformation, check it is active. Is the object 0plant is acitve or not?
Ravi Thotahdri

Hello, i am having problems getting face time to work, I keep getting an error message saying the server could not process the registration, I am using the username and password I always have and it has always worked in the past, any ideas?

Hello, i am having problems getting face time to work, I keep getting an error message saying the server could not process the registration, I am using the username and password I always have and it has always worked in the past, any ideas?

We aren't Apple, just users like you volunteering to help other users with problems. Threatening to go to Samsung doesn't mean anything to us. What troubleshooting have you tried so far?

"The installer could not copy the necessary support files." Error message on 0S X 10.6.3 Install

I have just wiped my iMac 21.5' Core i3 3.2GHz as I am going to sell it. This process went as expected but when I try to reinstall the OS from the disk that originally came with the system (10.6.3) it gets around 30% into the install and then produces the error message "The installer could not copy the necessary support files." No matter what I try the outcome is the same and the installation fails.
I did have the hard drive replaced on this iMac a couple of years ago as it was of a batch that apple said could go pop one day. Do the hard drive and the OS X disk that comes with the system have to match, or is it just a case of a faulty disc? Any help would be greatly appreciated.

Hi sonicdeathmonkey1882,
If you are having issues reinstalling the OS on your iMac, you may find the following articles helpful:
Apple Support: Troubleshooting Mac OS X installation from CD or DVD
http://support.apple.com/kb/HT2956
Apple Support: Troubleshooting Mac OS X installation and software updates (Mac OS X v10.6 and earlier)
http://support.apple.com/kb/ts1394
Regards,
- Brenden

Error: "The workflow could not delete the list item"

Have set up 2 lists: Events and EventsArchive. They have all the same fields. I have created a workflow in SPD using an impersonation step (I have Full control of the site/site collection). Workflow is essentially this:
    If Curent Item:Expired
equals
Yes
       Copy item in Current Item to
EventsArchive
       then Delete item in
Current Item.
The item is copying over to the EventsArchive list just fine, but the "delete" part is not happening. Instead, I get the following error:
The workflow could not delete the list item. Make sure the list exists and the user has permissions to delete items in the list.
The list obviously exists (or I wouldn't be able to copy an item from it), and I have as much permissions as anyone can have, so I'm not sure where else to turn with this.
Thanks in advance for your help!

Hi,
To test the issue, I create a simple workflow without using Impersonation step:
It works.
Could you please create new lists to avoid custom settings and test the issue again?
Similar thread:
https://social.msdn.microsoft.com/Forums/office/en-US/3fa94026-4487-4e4c-a5b4-12a79d6ee6a2/workflow-delete-item-not-working?forum=sharepointcustomizationprevious
Regards,
Rebecca Tu
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

SharePoint designer 2013 crashes most of the time, when opening sites. Error: The server could not complete the request.

Hi,
I have few sharepoint 2013 site's, which I am trying to open in sharepoint designer 2013.
After adding the site name in open site and clicking ok, the sharepoint designer crashes. At times the sites open, but 90% of the time, the sharepoint 2013 designer has crashed. I get the message "The server could not complete the request. For
more specific information, click on the Details button".
When clicking on "Details" button, there is a empty box. The error message never gets closed and have to kill the process.
I have tried doing "IISreset" multiple times, which has not helped.
Has anybody faced this issue? How to fix this?
Thanks

Hi Venkatzeus,
Firstly, I need to verify the followings:
1.Whether this issue occurred on a specify SharePoint 2013 site.
2.Whether you have extended the problematic site.
Make sure that your user is a site administrator. If you have extended the problematic site, please add it to AAM.
There are other probable causes for this issue:
1.Anonymous authentication is not configured for the problematic web application in IIS
Fix: Enable Anonymous authentication in IIS
2.Server is running out of memory
Fix: Free up memory on the server
Here are some similar articles for you to take a look at :
http://forums.bitwiseglobal.com/forum/sharepoint/the-server-could-not-complete-your-request-for-more-specific-information-click-the-details-button/
http://tjendarta.wordpress.com/2013/05/24/fix-sharepoint-designer-2013-the-server-could-not-complete-your-request-for-more-specific-information-click-the-details-below/
http://social.technet.microsoft.com/Forums/sharepoint/en-US/11854880-e85d-4e4c-ae9c-0ffd640d33d8/error-the-server-could-not-complete-your-request-while-opening-site-in-sharepoint-designer?forum=sharepointadminprevious
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/f93e155e-2c65-4744-a1d0-96cdbd50014d/sharepoint-designer-error-the-server-could-not-complete-your-request
I hope this helps.
Thanks,
Wendy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

The workflow could not update the item, possibly because one or more columns for the item require a different type of information using Update Item action

I got error "The workflow could not update the item, possibly because one or more columns for the item require a different type of information "I found out the cause is Update Item action
I need to update item in another List call Customer Report ,the field call "Issues" with data type "Choice" to yes
then the error arise . please help..

Thanks for the quick response Nikhil.
Our SPF 2010 server is relatively small to many setups I am sure. The list with the issue only has 4456 items and there are a few associated lists, eg lookups, Tasks, etc see below for count.
Site Lists
Engagements = 4456 (Errors on this list, primary list for activity)
Tasks = 7711 (All workflow tasks from all site lists)
Clients = 4396 (Lookup from Engagements, Tslips, etc)
Workflow History = 584930 (I periodically run a cleanup on this and try to keep it under 400k)
Tslips = 3522 (Engagements list can create items here, but overall not much interaction between lists)
A few other lists that are used by workflows to lookup associations that are fairly static and under 50 items, eg "Parters Admin" used to lookup a partners executive admin to assign a task.
Stunpals - Disclaimer: This posting is provided "AS IS" with no warranties.

FIM Export Fails - Fault Reason: The endpoint could not dispatch the request. FIM Account Issue?

Hi,
I have 3 fim servers:
fimportal - has fim service & portal running (uses account service.fim & service.sharepoint)
fimsync - has synchronisation service & synchronisation DB (uses account service.fimsync)
fimsql - holds portal DB for server fimportal
I've created an AD MA, FIM MA and an inbound AD sync rule. On my FIM MA I've used account svc-fim (i.e. the account I've used to install FIM). This is not the same account that runs the synchronisation service on fimsync (account svc-fimsync is used
for this).
I've ran a FIM MA import and full sync without issue (I can see my built in, admin account and the sync rule brought into the metaverse). When I do an export I receive an error as shown below.
What I'm not sure about is if it's because I'm using the wrong account for the FIM MA. If so, which account should I use and what's the best way to change my config (without a total reinstall)?
I've selected domain (as a text value), accountname and objectsid in my attribute flow, but I may have configured something wrong here.
Thanks
Fault Reason: The endpoint could not dispatch the request.\r\n\r\nFault Details: <DispatchRequestFailures xmlns="http://schemas.microsoft.com/2006/11/ResourceManagement" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"><DispatchRequestAdministratorDetails><FailureMessage>Exception:
Other
Stack Trace: Microsoft.ResourceManagement.WebServices.Exceptions.UnwillingToPerformException: Other ---> System.Data.SqlClient.SqlException: Procedure or function 'GetDomainConfigurationIdentifiersFromDomain' expects parameter '@domainName',
which was not supplied.
   at Microsoft.ResourceManagement.Utilities.ExceptionManager.ThrowException(Exception exception)
   at Microsoft.ResourceManagement.Data.Exception.DataAccessExceptionManager.ThrowException(SqlException innerException, TransactionAndConnectionScope scope)
   at Microsoft.ResourceManagement.Data.DataAccess.GetDomainConfigurationIdentifiersFromDomain(String domainName)
   at Microsoft.ResourceManagement.ActionProcessor.DomainConfigurationActionProcessor.AddDomainConfigurationFromDomain(CreateRequestParameter domainNameParameter, RequestType request)
   at Microsoft.ResourceManagement.ActionProcessor.DomainConfigurationActionProcessor.DoRequestCreationPreProcessByAttribute(RequestType request)
   at Microsoft.ResourceManagement.ActionProcessor.ActionDispatcher.DoRequestCreationPreProcessByAttribute(RequestType request)
   at Microsoft.ResourceManagement.WebServices.RequestDispatcher.CreateRequest(UniqueIdentifier requestor, UniqueIdentifier targetIdentifier, OperationType operation, String businessJustification, List`1 requestParameters, CultureInfo locale, Boolean
isChildRequest, Guid cause, Boolean doEvaluation, Nullable`1 serviceId, Nullable`1 servicePartitionId, UniqueId messageIdentifier, UniqueIdentifier requestContextIdentifier, Boolean maintenanceMode)
   at Microsoft.ResourceManagement.WebServices.ResourceManagementService.Put(Message request)
   --- End of inner exception stack trace ---</FailureMessage><DispatchRequestFailureSource>Other</DispatchRequestFailureSource><AdditionalTextDetails>Request could not be dispatched.</AdditionalTextDetails></DispatchRequestAdministratorDetails><CorrelationId>0c7141ca-63a2-42ae-92c3-a0c95de0d940</CorrelationId></DispatchRequestFailures>
Below shows separate MA account and separate FIM Sync Account
IT Support/Everything

Hi Tomek,
Apologies for the delay, been a busy festive period :-)
The account in question with the export flow error is my admin account that I used during installation (where prompted I did enter service account credentials).
Searching the FIM CS on the source object details show all attributes present (including domain), but looking at the export attribute flow shows a final value of deleted! See below.
I'm following the TechNet guide:
http://technet.microsoft.com/en-us/library/ff686264(v=ws.10).aspx and hit the error with the FIM MA export run profile when I run the below steps:
FIM MA - Full import
FIM MA - Full synchronization
FIM MA - Export
FIM MA - Delta import
AD MA - Fullll import
AD MA - Full synchronization
Initially my admin account was not in the selected containers as configured in the AD MA, however I've now ran that and re-ran the sync, which resulted in my test user being provisioned in the portal. My admin account is still not provisioned - I now get
2 export errors, 1 as before complaining of missing domain and another which complains of my admin account being a duplicate entry.
Please let me know if anything comes to mind.
Thanks
IT Support/Everything

Listener Error "TNS-01189: The listener could not authenticate the user"

Similar Messages

Maybe you are looking for