Listener getting hanged, its not starting

Hi Team,
after AIX team upgraded from TL4 to TL8, the listener is not starting. The database was started sucessfully. any ideas why the listener is not starting.
OS: AIX 6, TL8
Oracle : 10gR2 (10.2.0.3)
RAM 4GB
P.S I know that oracle 10g is not supported on AIX 6, we installed anyway and it was working fine in other servers which uses the same configuration.
Thanks and Regards
Venkata

Hi,
Listener status:
$ lsnrctl status
LSNRCTL for IBM/AIX RISC System/6000: Version 10.2.0.3.0 - Production on 22-NOV-2013 11:06:04
Copyright (c) 1991, 2006, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(PORT=1521)))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
IBM/AIX RISC System/6000 Error: 79: Connection refused
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=Epic0)))
lsnTNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
IBM/AIX RISC System/6000 Error: 79: Connection refused
listerner log
Started with pid=8716294
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=xxxxx-dd)(PORT=1521)))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=Epic0)))
Thanks

Similar Messages

Hi, Im from Philippines,.... i am currently using my iPhone 4 (iOs.6.3)it started when i upgrade it from iOs4 to iOs 6.3 , My iPhone doesnt identify numbers even if its in my contact if its not starting with +63 ..what will i do?

Hi, Im from Philippines,.... i am currently using my iPhone 4 (iOs.6.3)it started when i upgrade it from iOs4 to iOs 6.3 , My iPhone doesnt identify numbers even if its in my contact if its not starting with +63 ..what will i do?
I change everything into +63 and i thought everything is already fine,.. and then now , i dont know what happened why it doesnt recognize numbers with +63 anymore

Hello hsielglad,
Thank you for your question. iTunes 11.1 is required to update to and sync with iOS 7. If you are still running iTunes 10.6.3, I recommend trying to obtain the update by going to the iTunes menu and selecting Check for Updates.
iTunes: How to install the latest version
http://support.apple.com/kb/HT5654
If you continue to get the message that iTunes is up to date, you can download the latest version of iTunes here:
Download iTunes
http://www.apple.com/itunes/download/
Once the file downloads, double click on the installation file that downloaded to initiate the installation.
Best,
Sheila M.

Java server0 its not starting with error -11113

Dear Experts team,
When We are starting SAP Solution Manager 7.10, Its ABAP Instance is running file ,
But Java Instance not running , In this Java Process table , SDM and dispatcher is working file (green)
But in server0 its not starting and -11113 (core service or addition service start fails)
When check Developer Trace of dev_server0 , it show last few lines as given below,
Thr 5464] JLaunchIExitJava: exit hook is called (rc = -11113)
[Thr 5464] **********************************************************************
[Thr 5464] *** ERROR => The Java VM terminated with a non-zero exit code.
[Thr 5464] *** Please see SAP Note 943602 , section 'J2EE Engine exit codes'
[Thr 5464] *** for additional information and trouble shooting.
[Thr 5464] **********************************************************************
[Thr 5464] JLaunchCloseProgram: good bye (exitcode = -11113)
Please suggest ...
Thanks
Regards
Sunil k

Hi,
Hope you are doing good.
Please check the latest STD_SERVER0 and the default traces and attach the contents here. This should have the error details. Exit code 11113 means that some essential service fails to start so the server/dispatcher process fails.
Thank you!
Kind Regards,
Hemanth
SAP AGS

I have not used ipad from last 1 year and now its not starting any suggestion how to start, i have not used ipad from last 1 year and now its not starting any suggestion how to start

i have not used ipad from last 1 year and now its not starting any suggestion how to start,

Using the Supplied iPad charger, Connect it to the mains for at least 60 minutes...
Then try to turn it on.

When the new version will correct the error 10.0.0? program constantly hangs. will not start!

when the new version will correct the error 10.0.0? program constantly hangs. will not start!

Are you using any VST plug-ins or audio units? Then check, if they are still compatible. You may need to uninstall them.
See this support document:
Unexpected behavior with Audio Unit plug-ins http://support.apple.com/kb/TS5249

I installed new OS to my IPhone 4 and now phone gets hangs and not able to type or chat .. how to resolve it now

i installed new OS to my IPhone 4 and now phone gets hangs and not able to type or chat .. how to resolve it now

Try a reset to begin with. hold down the Sleep and Home key until Apple logo appears on the screen.
Regards,
Steve

When i start my mac system its produce sound and its not started.

when i start my mac system its produce sound and its not started. what i do for solving this problem. can anybody help me?
can any body tell me what is problem occour in my mac?

https://discussions.apple.com/thread/3054726?tstart=0

Because of low battery my iphone 5 got switched off and than its not starting by pressing the power button and in charge the white screen comes for 2 second and goes

Because of low battery my iphone 5 got switched off and than its not starting by pressing the power button or by keeping it on charge. While charging a white screen comes for 2 second and goes away. This process continues till the phone is on charge. Please suggest how can I start my phone.

Hello Ritugor,
I would be concerned too if my iPhone was not powering on. I found an article with steps you can take when you encounter an issue like this. I recommend following the steps below:
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 30 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
You can find the full article here:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Thank you for using Apple Support Communities.
Best,
Sheila M.

I have up dated my apple tv software but its not starting up, the light just constantly blinking

i have recently update my apple tv software, but its not starting up. it constly blinking.

Hi, sitzmark128.
Sometimes a simple power cycle of your your wireless network can resolve some AirPlay issues. I would also recommend closing any open applications in multitasking and restarting the device. If unfamiliar with multitasking, I have included a screenshot on how to process an application close.
If the issue persists after processing these steps, see the article below.
Troubleshooting AirPlay and AirPlay Mirroring
http://support.apple.com/kb/ts4215
Cheers,
Jason H.

My ipada mini has over heated and its not starting

my ipada mini has over heated and its not starting

What do you mean by 'frozen' ? Have you tried a soft-reset to see if that gets it to work ? Press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider if it appears), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

DMP 4305 getting hanged and not reachable

Hi,
We have a DMP 4305 player which is running the version 5.2.1 and MCS 7835-H2 server playing version 5.2.2.
The players are getting hanged after few days and is not reachable. We need to restart the players, but the same thing repeats after few days.
Kindly advise.

Hi,
Normally DMP and DMM are supposed to run the same version so the first step here would be to upgrade your DMP to 5.2.2 so that it matches the DMM version.
If you still have the problem afterwards a TAC case would be the way to go to investigate if we are facing a memory leak or a simple hang of the device.
Regards,
Nicolas

How can I get WebAS to not start-up after restarting Windows?

I would like to not have my WebAS auto start after I reboot windows.
I found of couple of options in Configuration tool but they did not stop it.
We have a firewall product that I cannot disable (per security policy), but I can terminate it once I get the desktop. However by that time WebAS has started and encounters blocks from firewall, and once this happens, half the time it causes my jcontrol.exe to result in NIETIMEOUT messages and once THAT happens I have to uninstall and reinstall EVERYTHING.
So, how can I configure WebAS to not automatically start-up after rebooting windows? I have searched help.sap.com and looked for options in Visual Admin and Configure tools.

Easier than it seems
Go to Administrative Tools/ Services in Windows.
Change Startup type of the services to Manual.
You can just sort by the 'Log On As' Column
".\SAPServiceJ2E"
or whatever you instance name is. You can always start the service from the MMC console after this.

How to get Skype to NOT start up automatically

I just installed Skype on my new computer, and every time I turn my computer on, Skype starts up. I don't want it to start up unless I'm going to use it. Is there a way to make it so that Skype doesn't start automatically? I'm starting to get irritated by having to quit the program every time I turn my computer on.
Solved!
Go to Solution.

Do you e.g. have any Skype wireless or Bluetooth phone application installed?
You can also open Windows System Configuration utility (msconfig.exe) -> Startup tab, and look for any applications selected there.
http://community.skype.com/t5/Windows-desktop-client/Annoying-autostart-feature/m-p/973234#M71761

Unable to install or update to firefox 20. insted i loose my old data of firefox and its not starting now.

in LINUX.....
i was trying to update my Firefox, but i was unable to do so.
according to your documentation i created symbolic link at the place you said.
still it opens old Firefox.
then i found out there are many more location which holds Firefox old backup, i replace them with new path and hence i lost new as well as old installation.
Then I removed total installation and tried to install again, but its unsuccessful. Then I tried with add/remove software.. it shows Firefox 3.6 which is outdated.
How do i install now?
System config:
core 2 quad processor,
4gb RAM,
500GB HDD,
OS: Fedora 13.

IT'S KIND SUGGESTION.....
PLEASE PLEASE DEVELOP SOME .rpm or .sh FILE SO THAT WE DON'T HAVE TO TAKE TENSION TO UPDATE THIS UPDATE THAT AND ETC....

Early 08 mbp getting power, but not starting up

Tried to start up my machine after pulling it out of my bag today, and weirdness occured. The status light comes on, then fades, but doesn't turn off. The optical drive and hdd both spin up, the fans turn on, but then everything stops. The status light stays dimmed, the drives spin back down, but the display never activates, no chime emerges from the machine, and several keyboard commands later nothing has happened. It will stay like this indefinately, or at least the longest I've let it sit like that is about 2 or 3 hours. Tried resetting power management, pram has been reset, I've let everythig sit or several hours, all to no effect. Any ideas on what could be wrong? It does travel a decent amount, maybe a jolt knocked something loose? Any ideas or suggestions would be really helpful. Thanks.

Yes it does indeed power down after about 5 seconds of holding down the power button. It might also be worth noting that if I close the lid while it is in this "limbo" state, that the status light brightens back up to full brightness. Don't know if it is worth mentioning, but I just spaced on stating that earlier.

Listener getting hanged, its not starting

Similar Messages

Maybe you are looking for