Listener & grid control after upgrade to 11.1.0.7

going from 10.2.0.2 to 11.1.0.7 on aix 5.3
On our test server we have about 8 databases that are all currently using the 10.2 listener. I've upgraded one of our very basic test databases to 11g this morning, and for the time being just created a new listener11g that listens to different port. when I start it, the log file is being created in ORACLE_BASE/diag/tnslsnr/<server>/<lsnrname>/alert/ instead of the default ORACLE_HOME/network/logs I didn't tell it to create the listener log there, anyone else have this issue?
Also, my databases are all currently being monitored by OEM Grid Control and NOT DB Control. What steps should I take to get that running correctly again after the upgrade? Delete the target database and add it back after the upgrade? Sorry ahead of time if there is a meta-link doc for this, I've searched briefly and came up empty handed.
Thanks,
Ben Alvey

well, from what I read about the ADR architecture it wasn't clear that the listener log would move. the metalink documents for the listener log still state that the default log directory is ORACLE_HOME/network/log as well.
And seeing how I supplied a different value for diagnostic_dest during the upgrade of said database it didn't make much sense to me how it came to the decision to stick it where it did. I'd say it is using the value from $ORACLE_BASE during the install.
It would be helpful if their docs didn't contradict themselves constantly.

Similar Messages

Problems with controls after upgrading to ipod version 1.1

i just downloaded new software for my ipod shuffle (version 1.1) and now my earbud control does not seem to be working (no volumne control, no forward or reverse - no control whatsoever). it was working fine before i connected to charge the unit. i was asked to upgrade to a new version of the program (which I did). does anyone have any idea what has happened and what can fix it? thx.

Yes Paul I have, but no solution. I cannot send email. My ISP uses a smtp mail server for sending and It will not log in. Have had ISP on phone and checked all settings. Can only put it down to Mavericks.
It worked OK for a week after upgrading then stopped. So now having to use web mail to send email.
Strange thing is I receive mail OK, just cant send.

Print out size lost control after upgrade to osx 10.9, cannot print 100% document original size, why?

As subject said.
I'm using Xerox 1450GA, before upgrade to OSX 10.9, printing Adobe file could be in 100% real size. After upgrade, lost control, even checked setting in 100% in setting, come out image still auto reduce few percents, that make me confuse and cannot complete digital printing jobs, someone have same problem? Please help to solve...

I've spent hours on the phone going in circles with HP's "support" (I use the term loosely here) and can confirm that it's a driver issue. The best part is, HP and Apple claim that neither of them have a copy of the v2.14 driver that actually worked, and I can't seem to dig one up online anywhere. I've tried everything under the sun and just gave up... ordering an Epson and selling both of my HP's. I think the only other option is to wait for HP to release working drivers, but since they don't even seem to understand that their driver is the source of the problem, I wouldn't hold my breath.
It seems really crazy to me that neither the manufacturer nor Apple keep a copy of the previous driver, but that's what I've been told. HP did release what they're calling a new 10.9 raster driver (available on their site), but it didn't fix the problem for me. If you have a timemachine backup from before the 2.16.1 driver was released, I'd restore to that and turn off automatic updates. If you don't (like me) seems like your stuck.

Cannot access Grid control after installation

I have installed Oracle Grid Control 11.1.0.1.0 for Linux x86-64 (64-bit). I can't access below URL
1. Enterprise Manager Grid Control URL: https://ccoshs02xvoem01.ccosvc.com:7799/em
2. Admin Server URL: https://ccoshs02xvoem01.ccosvc.com:7101/console
[oracle@ccoshs02xvoem01 oracle]$ $OMS_HOME/bin/emctl start oms
Oracle Enterprise Manager 11g Release 1 Grid Control
Copyright (c) 1996, 2010 Oracle Corporation. All rights reserved.
Starting WebTier...
WebTier Successfully Started
Starting Oracle Management Server...
Oracle Management Server Already Started
Oracle Management Server is Up
[root@ccoshs02xvoem01 ~]# netstat -anp | grep 799
tcp 0 0 :::7799 :::* LISTEN 26461/httpd.worker
[root@ccoshs02xvoem01 ~]# netstat -anp | grep 7101
tcp 0 0 ::ffff:172.30.1.31:7101 :::* LISTEN 18452/java
tcp 0 0 ::ffff:172.30.1.31:7101 ::ffff:172.30.1.31:53507 ESTABLISHED 18452/java
tcp 0 0 ::ffff:172.30.1.31:7101 ::ffff:172.30.1.31:54364 ESTABLISHED 18452/java
tcp 0 0 ::ffff:172.30.1.31:54364 ::ffff:172.30.1.31:7101 ESTABLISHED 22561/emagent
tcp 0 0 ::ffff:172.30.1.31:53507 ::ffff:172.30.1.31:7101 ESTABLISHED 20994/java
tcp 0 0 ::ffff:172.30.1.31:53496 ::ffff:172.30.1.31:7101 ESTABLISHED 20994/java
tcp 0 0 ::ffff:172.30.1.31:53487 ::ffff:172.30.1.31:7101 ESTABLISHED 20994/java
tcp 0 0 ::ffff:172.30.1.31:7101 ::ffff:172.30.1.31:53496 ESTABLISHED 18452/java
tcp 0 0 ::ffff:172.30.1.31:7101 ::ffff:172.30.1.31:53487 ESTABLISHED 18452/java
Please can I know what needs to be done to access Grid Control.

Hi ,
Try to restart your service by following the below order mentioned in the link.Hope it should work.First stop all services and start them.
http://rafioracledba.blogspot.com/
Best regards,
Rafi.
http://rafioracledba.blogspot.com/

Server admin lost control after upgrade to 10.4.10

After I upgraded my server 10.4.8 to 10.4.10 i have lost the control from Server Admin. When I try to connect to the server it says "There is no server available at the address you entered." I have tried to connect using the 127.0.0.1 address, the local servername "myserver.local" and ofcause the local LAN IP 192.168.1.1 and the WAN address 212.131.2.1. The server has before upgrading to 10.4.10 been running for a long time without any problems with Server Admin.
In the syslog this message appears:
Sep 6 15:58:38 ns3 /Applications/Server/Server Admin.app/Contents/MacOS/Server Admin: [368] ServerManager session failed in connect(ns3.myserver.net,212.131.2.1,687): 61\n
Any help with this problem?
jesper

It didn't work for me. I ran a security update this weekend, and then the problems started Monday when I restarted. It seems like the update renamed my server. The only place I know how to rename stuff is in the "sharing" section of "system preferences." But now with the update (and I don't really know if it was like this before) I can't use periods in the name (it changes them to hyphens). Is anyone else having this problem?

Deinstall Error for Old Grid Home after Upgrade from 11.2.0.1 to 11.2.0.2

Hi,
I just upgraded from 11.2.0.1 to 11.2.0.2, both the grid infrastructure and the databases, using out-of-place upgrade. There were no errors during the upgrade and was able to deinstall the old database homes with no issues. The configuration we have is two standalone database servers connected to a clustered ASM array.
Now I'm trying to remove the old grid infrastructure home using deinstall. I get the following exception in the log file:
[main] [ 2010-11-17 09:51:50.533 EST ] [CRSDeconfig.getOracleUserGroup:876] Reading Oracle user and group name property values
[main] [ 2010-11-17 09:51:50.533 EST ] [CRSDeconfig.getOracleUserGroup:887] ORACLE_OWNER = grid
[main] [ 2010-11-17 09:51:50.534 EST ] [CRSDeconfig.getOracleUserGroup:925] ORA_DBA_GROUP = oinstall
[Thread-32] [ 2010-11-17 09:51:50.542 EST ] [StreamReader.run:61] In StreamReader.run
[Thread-31] [ 2010-11-17 09:51:50.542 EST ] [StreamReader.run:61] In StreamReader.run
[Thread-31] [ 2010-11-17 09:51:50.980 EST ] [StreamReader.run:65] OUTPUT>NAME=ora.prd11gr2.db
[Thread-31] [ 2010-11-17 09:51:50.981 EST ] [StreamReader.run:65] OUTPUT>TYPE=ora.database.type
[Thread-31] [ 2010-11-17 09:51:50.981 EST ] [StreamReader.run:65] OUTPUT>TARGET=ONLINE
[Thread-31] [ 2010-11-17 09:51:50.981 EST ] [StreamReader.run:65] OUTPUT>STATE=ONLINE on node1
[Thread-31] [ 2010-11-17 09:51:50.981 EST ] [StreamReader.run:65] OUTPUT>
[Thread-31] [ 2010-11-17 09:51:50.981 EST ] [StreamReader.run:65] OUTPUT>NAME=ora.tst11gr2.db
[Thread-31] [ 2010-11-17 09:51:50.982 EST ] [StreamReader.run:65] OUTPUT>TYPE=ora.database.type
[Thread-31] [ 2010-11-17 09:51:50.982 EST ] [StreamReader.run:65] OUTPUT>TARGET=ONLINE
[Thread-31] [ 2010-11-17 09:51:50.982 EST ] [StreamReader.run:65] OUTPUT>STATE=ONLINE on node2
[Thread-31] [ 2010-11-17 09:51:50.982 EST ] [StreamReader.run:65] OUTPUT>
[main] [ 2010-11-17 09:51:51.086 EST ] [CRSDeconfig.verifyRACDatabases:2570] You must delete or downgrade the Oracle RAC databases and de-install the Oracle RAC homes before attempting to remove the Oracle Clusterware homes.
[main] [ 2010-11-17 09:51:51.086 EST ] [CRSDeconfig.checkConfig:201] Setting DC flag back to false
java.lang.reflect.InvocationTargetException
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at oracle.install.db.deinstall.wrapper.clusterDeconfig.callCheckImpl(clusterDeconfig.java:756)
at oracle.install.db.deinstall.wrapper.clusterDeconfig.main(clusterDeconfig.java:329)
Caused by: oracle.ops.util.FatalException: You must delete or downgrade the Oracle RAC databases and de-install the Oracle RAC homes before attempting to remove the Oracle Clusterware homes.
at oracle.ops.util.CRSDeconfig.verifyRACDatabases(CRSDeconfig.java:2573)
at oracle.ops.util.CRSDeconfig.checkConfig(CRSDeconfig.java:236)
at oracle.ops.util.CRSDeconfig.checkConfig(CRSDeconfig.java:198)
Any idea what I missed during the upgrade that makes the deinstall fail?
Thank you!

Hi,
if you upgrade you will not deinstall the old home, but simply remove it with rm.
There should be a MOS Note describing the procedure (It might be necessary as well to update the inventory).
Unfortunately don't have access to MOS atm...
Sebastian

Lost sound control after upgrade to ios 6.1.3

I just upgraded to IOS 6.1.3 and I lost the sound on music and videos. No sound at all when I play Youtube, local camera videos, music etc... I still have sound for ringtones and notifications.

Check out my post I spent 15 hours fixing it when my iPad 2 on iOS 6.1.3 volume disappeared.
https://discussions.apple.com/thread/5075175

Upgrading Grid Control 10.2.0.2 - segments are at different releases

Hi everyone,
Currently, I've got Grid Control running on Solaris (SunOS 5.9). The Repository DB is 10.2.0.2, the Management Service is 10.2.0.3 and the Management Agent is 10.2.0.3 on the host and all the targets (6 of them)
The target DB's vary from 9.2.0.5 to 10.2.0.4, which is where the issue is - 1 targets DB version is higher than the Repository and Management Service which is causing me some issues.
Therefore, I want to upgrade the Repository DB and the Management Service to 10.2.0.4. I've got this readme for the 10.2.0.4 Grid Control install/upgrade:
http://www.oracle.com/technology/software/products/oem/htdocs/gridr4_10204_readme_solaris.html
But I don't know whether I need to upgrade the DB first or after the Management Service??
If things run logically, I would upgrade the DB to 10.2.0.4 either manually or using DBCA and then upgrade the Management Service (using "Use existing DB" option following the steps in the doc above) - does this sound ok??
Has anyone else done this?? Would I also have to upgrade the Agents on the targets too??
Thanks,
Ric.

Ric,
The OMS patch will take care of the Grid Control Repository Schema so no worries there. The steps in the document should get you there, since your database is not 10.2.0.3 there is a database upgrade required to apply the 10.2.0.4 Grid Control you will need to patch the database to 10.2.0.3 before you proceed with the 10.2.0.4 grid control. Not sure if I made that very clear in my last post
As for the AGENT the agent is in a different home and therefore the patch will have to be applied separately. So yes to patch applications 1 for the OMS and 1 for the Agent. Then a patch for the agents on all machines where the agent is located.
Mike

Naming database inside Grid Control

Hi,
I have one question about database names in Database tab of Grid Control.
What is happening:
I have static definition of my services in the listener.ora file, and when I have installed Grid Control Agent on this node
Oracle registers name like this in my databases tab of Grid Control:
DBNAME_HOSTNAME.DBDOMAIN
I want to register my database like dbname.dbdomain. Is it possible? Can I have any control of naming of databases in Grid Control?
When I haven’t static definition of services in my listener.ora file, database is good registrated (*dbname.dbdomain*).
Thanks,
Best regards
Dragan

Yes you have control of naming databases in Grid Control.
When you add a database target to grid control, after chosing the host you'll see the databases on that host. Under the databases there is an option: "Manually add" If you chose this option you can name the database target however you want. so you can delete the database target from grid, and add again with manual option...

Little help about Grid Control

Hello,
is it possible to reconfigure EM Grid Control after changing hots's IP and name? Do I need to install it again or there's something like emca -config dbcontrol db in EM Database Console?
Thx in advance,
Aliq

you can reconfigure EM using emctl reconfigure

Grid Control 11GR1 and Weblogic Server

Am looking doing a new install of grid control 11gR1 on windows server 2008. I'm not all that familiar with the weblogic server. Can this be installed on the same server that Grid Control is running from?

Hello,
I'm not all that familiar with the weblogic server. Can this be installed on the same server that Grid Control is running from?Yes, you can. For OEM Grid Control 11gR1, you'll have to install WLS 10.3.2 and apply the Patch WDJ7.
You'll have more details on the following Notes of My Oracle Support:
How to Install Web Logic Server 10.3.2 for Installing 11g Grid Control [ID 1063762.1]
How to Download and Apply recommended WLS patch (WDJ7) on WLS home for 11g Grid Control Install/Upgrade [ID 1072763.1]Hope this help.
Best regards,
Jean-Valentin

Upgrading Management Agents after upgrading the Grid Control to 10.2..0.5

Hello:
I am pretty new to implementing Grid control. I have been assigned the task of upgrading the Grid control to 10.2.0.5. I successfully upgraded the GC to 10.2.0.5. Now the next task is to upgrade the Agents running on other Database nodes. I have 6 databases running on Solaris 9.0 , few of them running on RHEL 5.0 x86, a few of them on RHEL 5.0 86*64. I am looking to upgrade these agents in one shot. Is there any way I can accomplish this from Grid control. If it is the case, then do I have to download and upload the patchsets for 10.2.0.5 for various platforms into the Grid Control.
I would be very happy if you could give me valid pointers which would help me to understand and move further.
Regards,
Bala

Yes you can upgrade the agent at one shot.Refer the following OBE
http://www.oracle.com/technology/obe/obe10gemgc_10204/agentpatch_upgrade.htm

Grid control not working after clone

Hi:
After ebs 12.1.3 on linux clone, I found grid control doesn't work. Database is 11.1.0.7. Don't know if it worked before or not. I managered to start up the agent, secured the agent, upload agent. From the grid control, I can see the host is up, but the database on that server is down. on the database page, Host name is there, but the Port, SID Oracle Home are all blank. I tried agent resync and got errors like below:
====
Agent Operation completed with errors. For those targets that could not be saved, please go to the target's monitoring configuration page to save them. All other targets have been saved successfully. Agent has not been unblocked.
Error saving target ORCL_server1:oracle_database - target {ORCL_server1, oracle_database} is broken: cannot compute dynamic properties in time.
Error saving collections for target +ASM_server1:osm_instance -
Error saving collections for target ORCL_server1:oracle_listener - oracle.sysman.emSDK.emd.comm.SetCollectionException: internal error
Error saving collections for target ORCL_WEBOH__Application_orcl_tech_st_10_1_3.server2:oc4j - oracle.sysman.emSDK.emd.comm.SetCollectionException: internal error
====
Please advice.

Is this a RAC database?
I tried agent resync and got errors like belowWhat is the command you used?
Error saving target ORCL_server1:oracle_database - target {ORCL_server1, oracle_database} is broken: cannot compute dynamic properties in timeHave you reviewed these docs?
Target {database instance, oracle_database} is broken: cannot compute dynamic properties in time [ID 739993.1]
"cannot compute dynamic properties in time" errors in dbconsole [ID 1121586.1]
Target {clusterName, CLUSTER} Is Broken: Cannot Compute Dynamic Properties In Time. [ID 559362.1]
Listener target is broken cannot compute dynamic properties in time. [ID 1450615.1]
Thanks,
Hussein

System not started after installing grid control

HI,
I have installed grid control 10.2.0.1 on 11g r2 on rhel5.After installing grid control, whenever system get booted, it got hanged and saying
after starting up the listener
sql>ora-01078: failure in processing system parameters
LRM-00109:could not open parameter file '/raczone/init%s_reposSID.ora'
sql>disconnectdfailed
opmnctl:starting opmn and all managed process...
CRS-4124: oracle high availability services startup
crs-4000:command start failed, or completed with errors>

Hi,
Thanks for the reply!!!
I have installed 11g grid infra on 2 nodes and then try to install 10g grid control on node 1 but when i am booting my system it got hanged and throw an error:
sql>ora-01078: failure in processing system parameter
LRM-00109:could not open parameter file '/raczone/init%s_reposSID.ora'
sql>disconnectdfailed
opmnctl:starting opmn and all managed process...
CRS-4124: oracle high availability services startup
crs-4000:command start failed, or completed with errors>
then i have to forcefully bring down the system and started the linux in a single user mode and thereover i have to move or rename the dir to some other location,then only system get started.after starting up the system i have to again move or rename the grid control dir to org location.
So my question is which file or dir is forcing system to startup the grid control on boot?

Trouble with 10g after Installing Grid Control

Main problem: after installing Grid Control and rebooting, I can no longer access my databases.
I have 10g installed on a fairly decent Windows XP machine. It was running okay, but I had two Oracle database instance processes running at 200mb of RAM each (of a total of 1 GB of RAM), so it was a bit bogged down, as is to be expected when running Oracle as a server on Windows.
I then installed Grid Control, which seemed to go okay, and another database as well. But once the install completed, and I gained access to the Grid Control version of the OEM for the first time, that's when things got wacky. Connecting to any OEM instance started taking anywhere from 2-10 minutes, everything was bogged down considerably, etc. I tried shutting everything down and rebooting, but now things are worse. OEM is timing out and not finding servers, listener is timing out, etc. I've tried manipulating a few things in Net Manager (I noticed that my LISTENER section didn't seem to contain any data at all, and my databases weren't listed in there either) with no result.
I've also had trouble with "host credentials" and being able to administer the databases within the OEM, even after implementing a fix I had found to add my user name to a "log on as batch job" local security policy.
Finally, I noticed that after installing Grid Control, when I run "sqlplus", I now see "Oracle91 Enterprise Edition" instead of the "Oracle10g" it used to show (and I never had anything but 10g installed on this machine!).
Here's what happens when I try to access my dBs:
-When I try to launch the OEM connected to any of the 3 databases I created (which were previsouly running), the browser just times out with "page cannot be displayed".
-When I run "emctl start <ANYTHING>" I get file/path not found errors, and a file path with both forward and backward slashes (starting after the "agent" directory):
C:\oracle\product\10.1.0\agent/<...etc.>
-When I try to test a connection to a service in Net Manager, I get this error:
ORA-12557: TNS:protocol adapter not loadable
I had to manually add my listener info and databases info(under Service Naming) in Net Manager, but everything appeared fine in Oracle Directory Manager (unfortunately, that doesn't help much, since this is just a general info tool).
I am nothing near a DBA and my knowledge is limited, so I apologize for not being more consise, but I'd be glad to elaborate if someone could tell me what they need to know.
Thank you,
John

Yes; thank you both. Although I had 1 GB physical and 1.5 GB virtual memory configured, running Grid Control seemed to completely kill all available resources.
I have removed GC and its related database and applications, and I can again conncet to my databases via Database Control. Thank you.
By the way, another issue has arisen, seemingly in the aftermath of installing GC: my OEM Database Control instances now time out after about 60 seconds, logging me out each and every time. I have cookies enabled, but this doesn't seem to be the trouble. Is there a Web setting somewhere that will kick users out of the instance at timed intervals?

Listener & grid control after upgrade to 11.1.0.7

Similar Messages

Maybe you are looking for