Listener not getting started after db upgrade from 10.2.0.2.0 to 11.2.0.2.0
Dear all
i have successfully upgrade oracle database from 10.2.0.2.0 to 11.2.0.2.0 through dbua but after upgrade i have copied listener and tnsname from realese to and new release then i follow these step
Stop listener it get stop perfectly
start listener it won't get start it gives ora-12560 error
i have checked and change the file at /usr/sap/sid/sys/profile/oracle also
if there is anything to do with control file let me know
Kindly suggest for the above
Hi Rajendra,
Please refer:
1755636 - Database Administrators Segregation
480266 - Problems with the SYSDBA/SYSOPER/INTERNAL connect
700548 - FAQ: Oracle authorizations
Divyanshu
Similar Messages
-
"disp+work" process in not getting started after kernel upgradation
Hello Experts,
Good day…..,
I am new to SAP. I installed SAP ECC6 EHP4 with default kernel version 701 and it was working fine.
I have upgraded kernel version from 701 to 741, but the “disp+work” process is not getting started after kernel upgrade.
I have posted “dev_W0” log &
“disp+work” command result obtained in CMD prompt of respective server.
Please help me out in this. Thanks all in advance.
“dev_w0” Log”
trc file: "dev_w0", trc level: 1, release: "741"
* ACTIVE TRACE LEVEL 1
* ACTIVE TRACE COMPONENTS all, MJ
M sysno 55
M sid TNG
M systemid 562 (PC with Windows NT)
M relno 7410
M patchlevel 0
M patchno 42
M intno 20020600
M make multithreaded, Unicode, 64 bit, optimized
M profile D:\usr\sap\TNG\SYS\profile\TNG_DVEBMGS55_ABTHMSSB01
M pid 2392
M
M
M Wed Jul 23 02:04:35 2014
M kernel runs with dp version 208000(ext=117000) (@(#) DPLIB-INT-VERSION-208000-UC)
M length of sys_adm_ext is 500 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workp. 0 2392) [dpInit.c 731]
M DpCommonParamInit: rdisp/core_file_size = default --> no change
I MtxInit: 30000 0 0
M
M Wed Jul 23 02:04:36 2014
M DpIPCInit2: read dp-profile-values from sys_adm_ext
M DpShMCreate: alloate/attach shared memory (mode=ATTACH)
M DpShMCreate: sizeof(wp_adm) 24288 (1104)
M DpShMCreate: sizeof(tm_adm) 51472080 (256080)
M DpShMCreate: sizeof(ca_adm) 432000 (72)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/16/7464064/7583152
M DpShMCreate: sizeof(comm_adm) 7583152 (14904)
M DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
M DpShMCreate: sizeof(slock_adm) 0 (296)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm) 0 (80)
M DpSockTableSize: max/headSize/ftSize/tableSize=500/16/520064/520080
M DpShMCreate: sizeof(sock_adm) 520080 (1016)
M DpShMCreate: sizeof(vmc_adm) 0 (3208)
M DpShMCreate: sizeof(wall_adm) (ft=41664/fi=67472/hd=64/rec=192)
M DpShMCreate: sizeof(amc_rec_adm) (ft=86464/fi=67472/hd=64/rec=416)
M DpShMCreate: sizeof(websocket_adm) (ft=28864/hd=64/rec=272)
M DpShMCreate: sizeof(gw_adm) 64
M DpShMCreate: sizeof(j2ee_adm) 3936
M DpShMCreate: SHM_DP_ADM_KEY (addr: 00000000103D0050, size: 60433936
M DpShMCreate: allocated sys_adm at 00000000103D0250
M DpShMCreate: allocated wp_adm_list at 00000000103E20F0
M DpShMCreate: allocated wp_adm at 00000000103E2410
M DpShMCreate: allocated tm_adm_list at 00000000103E84F0
M DpShMCreate: allocated tm_adm at 00000000103E8730
M DpShMCreate: allocated ca_adm at 00000000134FF000
M DpShMCreate: allocated comm_adm at 0000000013568980
M DpShMCreate: system runs without slock table
M DpShMCreate: allocated sock_adm at 0000000013CA4130
M DpShMCreate: allocated vmc_adm_list at 0000000013D232C0
M DpShMCreate: system runs without VMC
M DpShMCreate: allocated gw_adm at 0000000013D23560
M DpShMCreate: allocated j2ee_adm at 0000000013D237A0
M DpShMCreate: allocated ca_info at 0000000013D24900
M DpShMCreate: allocated wall_adm (ft) at 0000000013D24B40
M DpShMCreate: allocated wall_adm (fi) at 0000000013D2F000
M DpShMCreate: allocated wall_adm (head) at 0000000013D3F990
M DpShMCreate: allocated amc_rec_adm (ft) at 0000000013D3FBD0
M DpShMCreate: allocated amc_rec_adm (fi) at 0000000013D54F90
M DpShMCreate: allocated amc_rec_adm (head) at 0000000013D65920
M DpShMCreate: allocated websocket_adm (ft) at 0000000013D65B60
M DpShMCreate: allocated websocket_adm (head) at 0000000013D6CE20
M DpShMCreate: initialized 21 eyes
M DpCommAttachTable: attached comm table (header=0000000013568980/ft=0000000013568990/fi=0000000013C86E10)
M DpSockAttachTable: attached sock table (header=0000000013CA4130/ft=0000000013CA4140)
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X <ES> EsILock: use Semphore 33 for locking
X Using implementation view
X <EsNT> Using memory model view.
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
X
X Wed Jul 23 02:04:37 2014
X mm.dump: set maximum dump mem to 96 MB
M ThStart: taskhandler started
M ThInit: initializing DIA work process W0
M
M Wed Jul 23 02:04:44 2014
M ThInit: running on host ABTHMSSB01
I MtxInit: 0 0 0
M
M Wed Jul 23 02:04:45 2014
M calling db_connect ...
B Loading DB library 'D:\usr\sap\TNG\DVEBMGS55\exe\dboraslib.dll' ...
B Library 'D:\usr\sap\TNG\DVEBMGS55\exe\dboraslib.dll' loaded
B Version of 'D:\usr\sap\TNG\DVEBMGS55\exe\dboraslib.dll' is "741.10", patchlevel (0.42)
C Prepending D:\usr\sap\TNG\DVEBMGS55\exe to Path.
C Register application info.
C
C Wed Jul 23 02:04:47 2014
C Oracle client version: 10.2.0.4.0, (dbsl 741 040714, UNICODE[2])
C Detailed Oracle client (patch) info not available.
C *** ERROR => Connect via SAPUSER not supported for kernel >= 740.
[dbsloci.c 2406]
C Only Secure Connect method possible.
M ***LOG R19=> ThDbConnect, db_connect ( DB-Connect 000256) [thDatabase.c 76]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step TH_INIT, thRc ERROR-DB-CONNECT_ERROR, action STOP_WP, level 1) [thxxhead.c 2281]
M Wed Jul 23 02:04:48 2014
M
M Info for wp 0
M
M pid = 2392
M severity = 0
M status = 0
M stat = WP_NEW
M waiting_for = NO_WAITING
M workerType = DP_WORKER_DIAWP
M act_cs_count = 0
M csTrack = 0
M csTrackRwExcl = 0
M csTrackRwShrd = 0
M mode_cleaned_counter = 0
M control_flag = 0
M report = > <
M action = 0
M tab_name = > <
M
M ThIErrHandle: no current incoming request
M
M
M *****************************************************************************
M *
M * LOCATION SAP-Server ABTHMSSB01_TNG_55 on host ABTHMSSB01 (wp 0)
M * ERROR ThInit: db_connect
M *
M * TIME Wed Jul 23 02:04:48 2014
M * RELEASE 741
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 16797709
M * MODULE D:/depot/bas/741_REL/src/krn/si/th/thxxhead.c
M * LINE 2470
M * COUNTER 1
M *
M *****************************************************************************
M
M PfRejectStatistic: clear statistic record
M PfClearAllRec: clear statistic area
M PfClearAllRec: statRecordAction = STAT_RECORD_ACTION_REJECT
M Entering TH_CALLHOOKS
M ThCallHooks: call hooks for event BEFORE_DUMP
M ThIErrHandle: entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workp. 0 2392) [dpnttool.c 335]
“Desp+Work” Command result:
C:\Users\tngadm>disp+work
disp+work information
kernel release 741
kernel make variant 741_REL
compiled on NT 6.0 6002 x86 MS VC++ 16.00 for NTAMD64
compiled for 64 BIT
compilation mode UNICODE
compile time Jul 9 2014 16:39:46
update level 0
patch number 42
source id 0.042
RKS compatibility level 0
supported environment
database (SAP, table SVERS) 700
710
701
702
703
711
720
730
731
732
738
740
operating system
Windows NT 5.1
Windows NT 5.2
Windows NT 6.0
Windows NT 6.1
Windows NT 6.2
Windows NT 6.3
C:\Users\tngC *** ERROR => Connect via SAPUSER not supported for kernel >= 740.
[dbsloci.c 2406]
C Only Secure Connect method possible.
For this issue you need to set up SSFS.
1639578 - SSFS as password storage for primary database connect
I am new to SAP. I installed SAP ECC6 EHP4 with default kernel version 701 and it was working fine.
I have upgraded kernel version from 701 to 741
Are you sure kernel 741 is compatible with an EHP 4 system ?
Read this SAP note
1969546 - Release Roadmap Kernel 740
Regards
RB -
OEM is not getting started after changing the Server name
Hello DBAs
Recently I installed Oracle database 10g on my a windows machine. It was working fine. Integrated OEM was also working fine.
But now I have changed the machine name. Now Oracle Database has come up after updating the listener.ora & tnsnames.ora files with new server name. But OEM page is not getting open now. I tried after updating the emd.properties and other related file on ORACLE_HOME\sysman folder with the new server name. But no luck.
In windows services one service named *"OracleDBConsoleDbname"* is not getting started, which could be the issue.
Can someone please guide me what can be done to fix this problem.
Thanks
-NaveenHi Naveen,
What you are doing is not supported by Oracle. From EM Database Console FAQ (863631.1):
What action needs to be taken if the hostname or SID of the database server is changed?
If there is a hostname or SID change for the database server then the database console needs to be recreated. There is no other solution if the hostname or SID is changed other that recreating the database console. All database console configuration files are created under the hostname_sid directory and the configuration files along with the repository keeps reference of the hostname, which is why dbconsole needs to be reconfigured if there is change in hostname/sid.
Refer : Note.293678.1 How To Reconfigure DB Control After a Hostname, Domain name or Listener Change Has Occurred On The Server
And take a look at note 278100.1: How To Drop, Create And Recreate DB Control In A 10g Database
Eric -
OEM is not getting started after windows server name changed
Hello DBAs
Recently I installed Oracle database 10g on my a windows machine. It was working fine. Integrated OEM was also working fine.
But now I have changed the machine name. Now Oracle Database has come up after updating the listener.ora & tnsnames.ora files with new server name. But OEM page is not getting open now. I tried after updating the emd.properties and other related file on ORACLE_HOME\sysman folder with the new server name. But no luck.
In windows services one service named "OracleDBConsoleDbname" is not getting started, which could be the issue.
Can someone please guide me what can be done to fix this problem.
Thanks
-NaveenThis problem will happen when either changing the computer name or changing the domain name that the server belongs to.
First, verify that the new computer name contains DNS compatible characters - no spaces or underscore ( _ ) characters, for instance. Next, you will need to recreate the Enterprise Manager Database Control repository. Directions can be found on this page under the heading of "6.2.8.3 Using EMCA After Changing the Database Host Name or IP Address":
http://download.oracle.com/docs/cd/E11882_01/install.112/e10818/srvpool.htm#CHDEGDIJ
The above directions should work as shown with Oracle 10g R2 - and possibly 10g R1 also.
Charles Hooper
Co-author of "Expert Oracle Practices: Oracle Database Administration from the Oak Table"
http://hoopercharles.wordpress.com/
IT Manager/Oracle DBA
K&M Machine-Fabricating, Inc. -
Hello,
I am using Oracle Database 10G and Windows Vista.
I am trying to start my listener but it is not getting started. When I looked at the error message.
It says
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
32-bit Windows Error: 2: No such file or directory
NS-12545: Connect failed because target host or object does not exist
TNS-12560: TNS:protocol adapter error
TNS-00515: Connect failed because target host or object does not exist
32-bit Windows Error: 1004: Unknown error
Can someone please tell me what could be wrong and how should I fix this problem.
ThanksIQ wrote:
Hello,
I am using Oracle Database 10G and Windows Vista.
I am trying to start my listener but it is not getting started. When I looked at the error message.
It says
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
32-bit Windows Error: 2: No such file or directory
NS-12545: Connect failed because target host or object does not exist
TNS-12560: TNS:protocol adapter error
TNS-00515: Connect failed because target host or object does not exist
32-bit Windows Error: 1004: Unknown error
Can someone please tell me what could be wrong and how should I fix this problem.
ThanksNothing has changed?
Is the host for the database using DHCP? If so, is it possible the DHCP address has changed?
Have any Windows patches been applied? Security (permissions to run jobs, etc) sometimes get changed behind the scenes.
Steps I would start with: get host IP address details, then dump the listener.ora file being used and look in the logs of the listener. -
Ipod Touch not getting detected after IOS upgrade.
I have recently upgraded the firmware of my Ipod Touch (1G) to IOS 3.0.1 and was successful in upgrading.
The issue i am facing is that my ipod touch is not getting detected after reconnecting and the ipod touch is not getting switched on...it is just showing the apple symbol and the progress bar.
Please let me know if anyone has faced similar type of issue.
Please also let me know the resolution for this.Are you using a USB hub? Try connecting the iphone directly to the computer's USB port and see if that makes a difference.
Also, with the upgrade, this seems to happen a lot. Most of the time if it is not the USB issue above, it can be resolved by simply redownloading Itunes and installing it on top of your current installation. -
Firefox will not start after I upgraded from Ubuntu 8.04 to Ubuntu 10.04.
I was using Firefox without issue on Ubuntu 8.04. I then upgraded to Ubuntu 10.04. Firefox would not start after upgrade. Message said it was already running!
I checked the System Monitor and saw it was "sleeping". I ended process. Firefox then would start, however..... I always have to go into System Monitor before I start Firefox to stop it from running (sleeping) even if I already just quit the program or after a fresh reboot.
I do not use a firewall or virus program.
My router has some sort of firewall hardware, and it is the same router I used with 8.04 with no problem.
What is going on? Why is the program sleeping when I try to start it. Why do I always get the message that it is already running (and I have to shut it down) before I can start it.
It is either a Ubuntu problem or a Firefox problem.
Sonny.''Crashes at startup can occur in Firefox 7 or above (but not Firefox 6 or earlier) if you are using a corporate login system such as IBM Tivoli Access Manager or Oracle Enterprise Single Sign On Manager ([https://bugzilla.mozilla.org/show_bug.cgi?id=680927 bug 680927]). '''See the bug report for a suggested workaround''' or downgrade to Firefox 3.6.xx (available [http://www.mozilla.org/firefox/all-older.html here]) which is still being maintained.''
Ref: http://kb.mozillazine.org/Firefox_crashes#Crash_when_starting_Firefox
The workaround for the crash is linked [https://bugzilla.mozilla.org/attachment.cgi?id=563484 HERE], under "Attachments" in the bug report. When you click that link it will show the contents of the .reg file (you can save the page as "ff7fix.reg" on your computer, and then merge it into the Windows registry, f you are comfortable doing that). -
Services in JCo RFC not getting started after Changing the client from 001
Hi SAP Stars,
I have recently Installed Quality and Production servers with PI 7.1 on windows 2003, Sqlserver 2005, when I'm doing Post Activities(http://host:port/nwa) in which I try to change the client from 001 to 300(newly created) in JCo RFC(4 services) and start the service it is throwing error when I again change it to 001 client and start the service it is getting started, Could anyone help me in solving this issue same issue I facing in PI 7.1 Quality and Production
Thanks In Advance
Anil KumarHi Anil,
All these JCo RFCs are client specific RFCs.
Please logon your PI NWA
Choose Configuration Management - Infrastructure- JCo RFC Provider
Then, Select the RFC
Under Details -> Choose Repository Configuraton
Change the client name to 300 (your new client)
Save
And repeat the same for all JCo RFC that you want to work for your newly created client.
Please ensure that you are using SAPJSF user & correct password for all these RFCs.
Ideally, these rfcs shuould work now if now please restart your PI (mostly Java alone also do)
I hope this helps you.
Regards
Sekhar
Edited by: sekhar on Dec 17, 2009 11:39 AM -
Oracle database not getting Up after patch upgrade
Hi,
I have upgraded my oracle database from 10.0.2.1 to 10.0.2.4. after this databse is not coming up. I am able to start/stop listner but while starting SAP it is not able to start databse. Pasting error log below.
Wed Jun 24 14:56:45 PDT 2009
LOGFILE FOR STARTING ORACLE
Trying to start CRD database ...
Wed Jun 24 14:56:45 PDT 2009
checking required environment variables
ORACLE_HOME is >/oracle/CRD/102_64<
ORACLE_SID is >CRD<
Wed Jun 24 14:56:45 PDT 2009
check initora
Wed Jun 24 14:56:45 PDT 2009
check initora
Wed Jun 24 14:56:45 PDT 2009
checking V2 connect
TNS Ping Utility for Linux: Version 10.2.0.4.0 - Production on 24-JUN-2009 14:56:45
Copyright (c) 1997, 2007, Oracle. All rights reserved.
Used parameter files:
/usr/sap/CRD/SYS/profile/oracle/sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (COMMUNITY = SAP.WORLD) (PROTOCOL = TCP) (HOST = CRM) (PORT = 1527))) (CONNECT_DATA = (SID =
CRD) (GLOBAL_NAME = CRD.WORLD)))
OK (0 msec)
tnsping: V2 connect to CRD
Wed Jun 24 14:56:45 PDT 2009
Connect to the database to check the database state:
R3trans: connect check finished with return code: 12
Database not available
Wed Jun 24 14:56:45 PDT 2009
Shutdown database
First trying to shutdown the database - May be,
the database is in the nomount or mount state
Wed Jun 24 14:56:45 PDT 2009
starting database
SQL*Plus: Release 10.2.0.4.0 - Production on Wed Jun 24 14:56:45 2009
Copyright (c) 1982, 2007, Oracle. All Rights Reserved.
Connected to an idle instance.
ORACLE instance started.
Total System Global Area 1224736768 bytes
Fixed Size 2083560 bytes
Variable Size 620758296 bytes
Database Buffers 587202560 bytes
Redo Buffers 14692352 bytes
Database mounted.
ORA-01092: ORACLE instance terminated. Disconnection forced
Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production
With the Partitioning, Data Mining and Real Application Testing options
Wed Jun 24 14:56:53 PDT 2009
Connect to the database to verify, that the database is now open
R3trans check finished with return code: 12
ERROR: Startup of database failed
Notify Database Administrator.
/usr/sap/CRD/SYS/exe/run/startdb: Terminating with error code 12
thanks,
BhanuHi,
I have tried to start and stop oracle from SPLplus but no luck. i am pasting alert log file which is saying some block courruption......
Starting up ORACLE RDBMS Version: 10.2.0.4.0.
System parameters with non-default values:
processes = 80
sessions = 96
event = 10191 trace name context forever, level 1
sga_max_size = 1224736768
shared_pool_size = 587202560
shared_pool_reserved_size= 57982058
filesystemio_options = setall
control_files = /oracle/CRD/origlogA/cntrl/cntlrCRD.dbf, /oracle/CRD/origlogB/cntrl/cntrlCRD.dbf, /oracle/CRD/sapdata1/cntrl/cntrlCRD.dbf
control_file_record_keep_time= 30
db_block_size = 8192
db_cache_size = 587202560
compatible = 10.2.0
log_archive_dest = /oracle/CRD/oraarch/CRDarch
log_buffer = 14246912
log_checkpoint_interval = 0
db_files = 254
log_checkpoints_to_alert = TRUE
dml_locks = 4000
undo_management = AUTO
undo_tablespace = PSAPUNDO
undo_retention = 43200
recyclebin = off
remote_os_authent = TRUE
remote_login_passwordfile= EXCLUSIVE
job_queue_processes = 1
background_dump_dest = /oracle/CRD/saptrace/background
user_dump_dest = /oracle/CRD/saptrace/usertrace
core_dump_dest = /oracle/CRD/saptrace/background
optimizer_features_enable= 10.2.0.1
sort_area_size = 2097152
sort_area_retained_size = 0
db_name = CRD
open_cursors = 800
optimpeek_user_binds = FALSE
pga_aggregate_target = 773094113
workarea_size_policy = AUTO
statistics_level = typical
PMON started with pid=2, OS id=25204
PSP0 started with pid=3, OS id=25206
MMAN started with pid=4, OS id=25208
DBW0 started with pid=5, OS id=25210
LGWR started with pid=6, OS id=25212
CKPT started with pid=7, OS id=25214
SMON started with pid=8, OS id=25216
RECO started with pid=9, OS id=25218
CJQ0 started with pid=10, OS id=25220
MMON started with pid=11, OS id=25222
MMNL started with pid=12, OS id=25224
Wed Jun 24 15:06:19 2009
ALTER DATABASE MOUNT
Wed Jun 24 15:06:24 2009
Setting recovery target incarnation to 1
Wed Jun 24 15:06:24 2009
Successful mount of redo thread 1, with mount id 182910572
Wed Jun 24 15:06:24 2009
Database mounted in Exclusive Mode
Completed: ALTER DATABASE MOUNT
Wed Jun 24 15:06:24 2009
ALTER DATABASE OPEN
Wed Jun 24 15:06:24 2009
Beginning crash recovery of 1 threads
parallel recovery started with 2 processes
Wed Jun 24 15:06:24 2009
Started redo scan
Wed Jun 24 15:06:24 2009
Completed redo scan
1 redo blocks read, 0 data blocks need recovery
Wed Jun 24 15:06:24 2009
Started redo application at
Thread 1: logseq 16126, block 2, scn 1104239482
Wed Jun 24 15:06:24 2009
Recovery of Online Redo Log: Thread 1 Group 2 Seq 16126 Reading mem 0
Mem# 0: /oracle/CRD/origlogB/log_g12m1.dbf
Mem# 1: /oracle/CRD/mirrlogB/log_g12m2.dbf
Wed Jun 24 15:06:24 2009
Completed redo application
Wed Jun 24 15:06:24 2009
Completed crash recovery at
Thread 1: logseq 16126, block 3, scn 1104259484
0 data blocks read, 0 data blocks written, 1 redo blocks read
Wed Jun 24 15:06:25 2009
LGWR: STARTING ARCH PROCESSES
ARC0 started with pid=16, OS id=25232
Wed Jun 24 15:06:25 2009
ARC0: Archival started
ARC1: Archival started
LGWR: STARTING ARCH PROCESSES COMPLETE
ARC1 started with pid=17, OS id=25234
Wed Jun 24 15:06:25 2009
Thread 1 advanced to log sequence 16127 (thread open)
Thread 1 opened at log sequence 16127
Current log# 3 seq# 16127 mem# 0: /oracle/CRD/origlogA/log_g13m1.dbf
Current log# 3 seq# 16127 mem# 1: /oracle/CRD/mirrlogA/log_g13m2.dbf
Successful open of redo thread 1
Wed Jun 24 15:06:25 2009
MTTR advisory is disabled because FAST_START_MTTR_TARGET is not set
Wed Jun 24 15:06:25 2009
ARC0: Becoming the 'no FAL' ARCH
ARC0: Becoming the 'no SRL' ARCH
Wed Jun 24 15:06:25 2009
ARC1: Becoming the heartbeat ARCH
Wed Jun 24 15:06:25 2009
SMON: enabling cache recovery
Wed Jun 24 15:06:25 2009
Errors in file /oracle/CRD/saptrace/usertrace/crd_ora_25226.trc:
ORA-00704: bootstrap process failure
ORA-39700: database must be opened with UPGRADE option
Wed Jun 24 15:06:25 2009
Error 704 happened during db open, shutting down database
USER: terminating instance due to error 704
Instance terminated by USER, pid = 25226
ORA-1092 signalled during: ALTER DATABASE OPEN...
Thanks,
Bhanu -
Accessing the ETL Getting Started after ODI Upgrade - SOLVED
Connected to the topology manager as SUPERVISOR and upgraded the work repository.
Thanks
Fabio D'Alfonso
Hi,
I was going back to take a look at the Getting started with ETL.
After the upgrade to 10.1.3.5.3 (and also 10.1.3.6.0) I cannot access the sample environment.
I upgraded the sample repository but the message still states that the repository is outdated.
Should I setup a full new environment to get back the ability to look at the getting started?
Thanks
Fabio D'Alfonso
Edited by: Fabio D'Alfonso on Jun 9, 2010 2:33 PMConnected to the topology manager as SUPERVISOR and upgraded the work repository.
Thanks
Fabio D'Alfonso
Hi,
I was going back to take a look at the Getting started with ETL.
After the upgrade to 10.1.3.5.3 (and also 10.1.3.6.0) I cannot access the sample environment.
I upgraded the sample repository but the message still states that the repository is outdated.
Should I setup a full new environment to get back the ability to look at the getting started?
Thanks
Fabio D'Alfonso
Edited by: Fabio D'Alfonso on Jun 9, 2010 2:33 PM -
Backend PO not getting created after EHP6 upgrade
Hi Friends,
Recently there was an SAP patch upgrade in ECC 6.0 and after that while creating the shopping cart the PO is created, but it is not transferring to ECC. We are using the extended classic scenario SAP SRM 7.0. I had checked almost everything right from debugging still clueless. even checked the forums but still the issue is not resolved. Any hints of how to proceed now.
Regards,
Ramesh.When We are creating shopping cart, system will create Po in back end based on our BAPI.
Check whether BAPI is running properly or not. You are updated new version EHP6 , I hope you should do required configuration. Try in development server whether Po are creating backend or not.
I hope you should check all the configuration in backend system i.e in ECC and SRM side.
Do again batch running and check whether back ground job getting created or not. -
Enqueue process not getting start after failover
Hi Experts,
We are facing problem suddenly after doing failover test. This problem arrived today only. Before it was happening successfully.
Before failover everything is running fine on primary node. After doing failover the enqueue sever process on ASCS instance is not starting in secondary node.
It's also showing license will expire on 16.11.2010, but system has
already license installed.
The ASCS start logs are showing as below -
Execute Pre-Startup Commands
(12517410) Local: /usr/sap/PRD/SYS/exe/run/sapcpe pf=/usr/sap/PRD/SYS/profile/PRD_ASCS00_sapprd1 list:/usr/sap/PRD/SYS/exe/run/scs.lst
(11534542) system(/usr/sap/PRD/SYS/exe/run/sapcpe pf=/usr/sap/PRD/SYS/profile/PRD_ASCS00_sapprd1 list:/usr/sap/PRD/SYS/exe/run/scs.lst) returns 4
(12517412) Local: /usr/sap/PRD/SYS/exe/run/sapcpe pf=/usr/sap/PRD/SYS/profile/PRD_ASCS00_sapprd1 list:/usr/sap/PRD/SYS/exe/run/sapcrypto.lst
(11534542) system(/usr/sap/PRD/SYS/exe/run/sapcpe pf=/usr/sap/PRD/SYS/profile/PRD_ASCS00_sapprd1 list:/usr/sap/PRD/SYS/exe/run/sapcrypto.lst) returns 255
(12517414) Local: rm -f ms.sapPRD_ASCS00
(12517416) Local: ln -s -f /usr/sap/PRD/ASCS00/exe/msg_server ms.sapPRD_ASCS00
(12517418) Local: rm -f en.sapPRD_ASCS00
(12517420) Local: ln -s -f /usr/sap/PRD/ASCS00/exe/enserver en.sapPRD_ASCS00
Starting Programs
24.10.2010 18:39:42
ShmDetach
OK
(12517424) Starting: local ms.sapPRD_ASCS00 pf=/usr/sap/PRD/SYS/profile/PRD_ASCS00_sapprd1
(8585426) Starting: local en.sapPRD_ASCS00 pf=/usr/sap/PRD/SYS/profile/PRD_ASCS00_sapprd1
(11534542) Waiting for Child Processes to terminate.
(11534542) **** 2010/10/24 18:39:42 Child 8585426 terminated with Status 1 . ****
(8585426) **** 2010/10/24 18:39:42 No RestartProgram command for program 1 ****
It's unable to start enqueue server process.
Please suggest your solutions.
Regards,
Ramesh.Hi Gagan,
The enqueue problem is resolved. Atually 2 days before we increased RAM of primary node by 1GB, and that was creating issue. we revert it back and again did a switchover and everything is running fine. It was strange that my secondary node is getting affected due to increasing the RAM in primary node.
Regarding license key, can you please provide me detail steps to resolve it. I have gone through installation doc but couldnt find it. Now Tcode slicense is showing another hardware key in my DI system. Do I need to get seperate permenant license key for DI by registering DI host and new hardware key??
Just confirm and also add some of your expert suggetsions.
Regards,
Ramesh.
Edited by: ramesh_basis on Oct 25, 2010 7:26 AM -
after restore from backup, iphone is not getting start, only apple logo is there on screen
Hi there.
Try some basic trouble shooting steps first, before looking into some advanced issues that might be causing this. The first thing I would try, is holding down the power button and home button at the same time until the screen turns off on you. See what steps you can take from there, if any.
Kind Regards.
- Mike. -
SLD will not start after I upgraded Netweaver 2004s Portal
SLD will not start after I upgraded Netweaver 2004s Portal from SP 14 to SP 15.
It gives me the following J2EE error:
Application error occurred during request processing.
Details: java.lang.NoSuchMethodError: com.sap.sld.api.wbem.transform.ICIMParser.getNamePool()Lcom/sap/sld/api/wbem/cim/NamePool;
Exception id: [00145E336A6A00680000002A000003480004502001E11FF0]Hi ,
as a first question: What versions of WAS / NWDS are you using?! (Main question is if you are using corresponding versions, i.e. NWDS 2.0.x with WAS 6.40 SP x, with the same value for x.)
See the threads below for more information
NetWeaver 2004s upgradation problems
Could not run WebDynpro Tutorial - NoClassDefFoundError
Points are welcome if it is useful
Koti Reddy -
The Connection Server does not start after an upgrade to BO4.1 SP3
Hello guys,
The Connection Server does not start after an upgrade to BO4.1 SP3
We are in process to upgrade our Business Objects environments to BO4.1 SP3
The first 2 environments , the upgrade went fine. But the third environment de connection server won’t start.
When I always try to start it returns me a failed status and shows me that the server is considered failed because it has stopped 5 time(s) in 60 minute(s).
Our OS is AIX
Uncaught Exception in SilentScope: [CS] Ser
verInitialization::InitManager::Initialize: 0.007^^
The CS initialization failed within the CS server. Aborting
trc file: "connectionserver_BIO.ConnectionServer_ncs.trc", trc level: 1, release: "720"
GerdHi Amine
The File seems ok
File from the failing connection server
-rw-rw---- 1 bioadm bosys 43993 Apr 11 11:29 boconfig.cfg
File from our test system
-rw-rw---- 1 bitadm bosys 43892 Apr 14 10:56 boconfig.cfg
I created a new connectieserver(by the copy function), but the new server won't start.
Regards
Gerd
Log
|89d4a6e0-2a89-7a05-3020-a51d517ab872|2014 04 14 11:54:30:113|+0200|Error| |>>|E| |connectionserver_BIO.ConnectionServer|28246236|3097|| |0|0|0|0|-|-|-|-|-|-||||||||||||[CS] Unhandled exception raised during CS initialization.
init_srv.cpp:95:-: TraceLog message 3
|4dcf04b1-1e1d-df13-48ad-a67f06e29864|2014 04 14 11:54:30:113|+0200|Error| |<<|E|X|connectionserver_BIO.ConnectionServer|28246236|3097|| |0|0|0|0|-|-|-|-|-|-||||||||||||Uncaught Exception in SilentScope: [CS] ServerInitialization::InitManager::Initialize: 0.003
|77ad78f4-37f7-3013-3b50-85cce9fbe7b8|2014 04 14 11:54:30:113|+0200|Error| |>>|E| |connectionserver_BIO.ConnectionServer|28246236|3097|| |0|0|0|0|-|-|-|-|-|-||||||||||||[CS] The CS initialization failed within the CS server. Aborting.
Maybe you are looking for
-
How to use nested tables in adobe form
Hi All, I have to use nested tables in adobe form for table display. I have used Subforms for displaying table data. I have changed accessibility of the subforms. Currently i am able to print print the table correctly if there is single material reco
-
ISight not working from one user account on MacBook
Hi everyone, It'd be great to get some help with fixing an iSight camera. I've followed the instructions here: http://support.apple.com/kb/HT2090 and have narrowed it down to a particular user account (it has admin permissions). Other user accounts c
-
Enchancement Request: IR arrow button in Search Filter uses applied Filters
Hello, I'd like to request an Enhancement. I'd like the IR arrow button in IR Search Filter, when performs the DISTINCT to provide choices in list for the user to select, that would take into consideration any other Filters that have already been app
-
XPS 8500, AMD Radeon HD 7870, TF2 Crashes
Team Fortress 2 crashes my XPS 8500. I have an AMD Radeon HD 7870. It always crashes, ALWAYS. There are wild audio and screen artifacts associated w/ this. Often the card dies and I get a message that the card failed but then recovered. The game whit
-
My Apple ID Has Been Disabled?
I just got my Ipod touch restored through ITunes after I was locked out when it was disabled. I succesfully put it into recovery mode and I now have full access to my Ipod touch. When I tried to download "Snapchat" a message came up saying "Your Appl