Listener running but SQL*Plus not connecting
Hi -
I've just installed 8.0.5 on RedHat 5.1 but I seem to be having
connection problems.
After some fiddling I seem to have the listener running on 1521
quite happily but when I try to run svrmgrl or sqlplus I get the
error 'ORA-12571: TNS:packet writer failure'.
The excellent 'Oracle8 A Beginners Guide' says that this is a
Net8 error but as far as I can tell, Net8 is running on TCP/IP as
you might expect, but 'as far as I can tell' isn't very far at
all really. I'm just digging through the Administrators Guide
documentation but as far as I can see, everything's fine.
Any ideas?
Simon
null
This is a known problem for Oracle on Linux. Try setting write
permissions for the unix domain sockets in
/var/tmp/.oracle/
Simon Greenwood (guest) wrote:
: Hi -
: I've just installed 8.0.5 on RedHat 5.1 but I seem to be having
: connection problems.
: After some fiddling I seem to have the listener running on 1521
: quite happily but when I try to run svrmgrl or sqlplus I get
the
: error 'ORA-12571: TNS:packet writer failure'.
: The excellent 'Oracle8 A Beginners Guide' says that this is a
: Net8 error but as far as I can tell, Net8 is running on TCP/IP
as
: you might expect, but 'as far as I can tell' isn't very far at
: all really. I'm just digging through the Administrators Guide
: documentation but as far as I can see, everything's fine.
: Any ideas?
: Simon
Get Technical!
http://technet.oracle.com
null
Similar Messages
-
Dispatcher running but message server not connected
Hi Guys,
I installed SAP netweaver 7.01 trial version and using MaxDB as database server.
When I start the NSB using SAPMMC, the message server is running but the disp+work.EXE is not working properly. It sometimes shows the status 'Running but message server not connected' and sometimes 'Running but que standstill'. It would be a great help if you could guide me to the solution of this problem.
DEV_MS file:-
trc file: "dev_ms", trc level: 1, release: "701"
[Thr 2148] Sat May 14 18:02:00 2011
[Thr 2148] MsSSetTrcLog: trc logging active, max size = 20971520 bytes
systemid 560 (PC with Windows NT)
relno 7010
patchlevel 0
patchno 0
intno 20020600
make: multithreaded, ASCII, optimized
pid 1484
[Thr 2148] ***LOG Q01=> MsSInit, MSStart (Msg Server 1 1484) [msxxserv.c 1853]
[Thr 2148] MsInitAclInfo: acl file F:\SAP\NSP\SYS\global\ms_acl_info.DAT not found, unrestricted access
[Thr 2148] MsGetOwnIpAddr: my host addresses are :
[Thr 2148] 1 : [10.10.0.10] DESKTOP5 (HOSTNAME)
[Thr 2148] 2 : [127.0.0.1] localhost (LOCALHOST)
[Thr 2148] 3 : [192.168.1.8] desktop5 (NILIST)
[Thr 2148] Sat May 14 18:02:01 2011
[Thr 2148] MsHttpInit: full qualified hostname = desktop5
[Thr 2148] HTTP logging is switch off
[Thr 2148] set HTTP state to LISTEN
[Thr 2148] ms/icf_info_server : deleted
[Thr 2148] *** I listen to port sapmsNSP (3600) ***
[Thr 2148] *** I listen to internal port 3900 (3900) ***
[Thr 2148] *** HTTP port 8100 state LISTEN ***
[Thr 2148] CUSTOMER KEY: >S1138463071<
[Thr 2148] build version=701.2008.03.06
[Thr 2148] Sat May 14 18:03:20 2011
[Thr 2148] *** ERROR => MsSClientHandle: no server provides service ENQ (4), requested from desktop5_NSP_00 [msxxserv.c 4711]DEV_DISP file:-
trc file: "dev_disp", trc level: 1, release: "701"
sysno 00
sid NSP
systemid 560 (PC with Windows NT)
relno 7010
patchlevel 0
patchno 7
intno 20020600
make: multithreaded, ASCII, optimized
pid 2740
Sat May 14 18:02:02 2011
kernel runs with dp version 240(ext=110) (@(#) DPLIB-INT-VERSION-240)
length of sys_adm_ext is 364 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 2740) [dpxxdisp.c 1257]
shared lib "dw_xml.dll" version 7 successfully loaded
shared lib "dw_xtc.dll" version 7 successfully loaded
shared lib "dw_stl.dll" version 7 successfully loaded
shared lib "dw_gui.dll" version 7 successfully loaded
shared lib "dw_mdm.dll" version 7 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
Sat May 14 18:02:11 2011
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 9 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5529]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >desktop5_NSP_00 <
DpShMCreate: sizeof(wp_adm) 8232 (1176)
DpShMCreate: sizeof(tm_adm) 3786880 (18840)
DpShMCreate: sizeof(wp_ca_adm) 1280 (60)
DpShMCreate: sizeof(appc_ca_adm) 1200 (60)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528040/528048
DpShMCreate: sizeof(comm_adm) 528048 (1048)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (96)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1296)
DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 057F0040, size: 4389744)
DpShMCreate: allocated sys_adm at 057F0040
DpShMCreate: allocated wp_adm at 057F1BF8
DpShMCreate: allocated tm_adm_list at 057F3C20
DpShMCreate: allocated tm_adm at 057F3C50
DpShMCreate: allocated wp_ca_adm at 05B904D0
DpShMCreate: allocated appc_ca_adm at 05B909D0
DpShMCreate: allocated comm_adm at 05B90E80
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 05C11D30
DpShMCreate: allocated gw_adm at 05C11D70
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 05C11DA0
DpShMCreate: allocated wall_adm at 05C11DA8
MBUF state OFF
DpCommInitTable: init table for 500 entries
rdisp/queue_size_check_value : -> off
Sat May 14 18:02:12 2011
ThTaskStatus: rdisp/reset_online_during_debug 0
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 127 blocks reserved for free list.
ES initialized.
rdisp/http_min_wait_dia_wp : 1 -> 1
Sat May 14 18:02:13 2011
***LOG Q0K=> DpMsAttach, mscon ( desktop5) [dpxxdisp.c 12204]
DpStartStopMsg: send start message (myname is >desktop5_NSP_00 <)
DpStartStopMsg: start msg sent
CCMS: alert/MONI_SEGM_SIZE = 0 monitoring and alerting switched off.
DpMsgAdmin: Set release to 7010, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1048]
DpMsgAdmin: Set patchno for this platform to 7
Release check o.K.
Sat May 14 18:02:53 2011
my types changed after wp death/restart 0x9f --> 0x9e
my types changed after wp death/restart 0x9e --> 0x9c
my types changed after wp death/restart 0x9c --> 0x98
my types changed after wp death/restart 0x98 --> 0x90
my types changed after wp death/restart 0x90 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=1629
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sat May 14 18:03:03 2011
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Sat May 14 12:33:03 2011
======================== -
If I leave my computer unattended, with Firefox running but the computer not connected to the internet (using a modem), Firefox (or the pages displayed on it) will reconnect with the internet. I have not allowed auto-reconnection. So how do I stop this?
install new copy on os
try again -
SQL-Command to long to run with SQL*Plus
Hello to everyone,
I'm creating a dynamic SQL Script to run with SQL*Plus.
The Script contains only INSERT Command.
The point is that the SQL*Plus supports only SQL-Strings (Commands)
not longer than 2500 Characters.
I've considered to split the String in Insert- and Update-Command(s),
but I've would like first to know if there any simpler way to run these
Commands on SQL*Plus.
thanx in Advance
bmSQL> create table t(x varchar2(4000));
Table created.
SQL> insert into t values (
'1234567890........0........0........0........0........0........0........0........0......100' ||
'1234567890........0........0........0........0........0........0........0........0......200' ||
'1234567890........0........0........0........0........0........0........0........0......300' ||
'1234567890........0........0........0........0........0........0........0........0......400' ||
'1234567890........0........0........0........0........0........0........0........0......500' ||
'1234567890........0........0........0........0........0........0........0........0......600' ||
'1234567890........0........0........0........0........0........0........0........0......700' ||
'1234567890........0........0........0........0........0........0........0........0......800' ||
'1234567890........0........0........0........0........0........0........0........0......900' ||
'1234567890........0........0........0........0........0........0........0........0.....1000' ||
'1234567890........0........0........0........0........0........0........0........0.....1100' ||
'1234567890........0........0........0........0........0........0........0........0.....1200' ||
'1234567890........0........0........0........0........0........0........0........0.....1300' ||
'1234567890........0........0........0........0........0........0........0........0.....1400' ||
'1234567890........0........0........0........0........0........0........0........0.....1500' ||
'1234567890........0........0........0........0........0........0........0........0.....1600' ||
'1234567890........0........0........0........0........0........0........0........0.....1700' ||
'1234567890........0........0........0........0........0........0........0........0.....1800' ||
'1234567890........0........0........0........0........0........0........0........0.....1900' ||
'1234567890........0........0........0........0........0........0........0........0.....2000' ||
'1234567890........0........0........0........0........0........0........0........0.....2100' ||
'1234567890........0........0........0........0........0........0........0........0.....2200' ||
'1234567890........0........0........0........0........0........0........0........0.....2300' ||
'1234567890........0........0........0........0........0........0........0........0.....2400' ||
'1234567890........0........0........0........0........0........0........0........0.....2500' ||
'1234567890........0........0........0........0........0........0........0........0.....2600' ||
'1234567890........0........0........0........0........0........0........0........0.....2700' ||
'1234567890........0........0........0........0........0........0........0........0.....2800' ||
'1234567890........0........0........0........0........0........0........0........0.....2900' ||
'1234567890........0........0........0........0........0........0........0........0.....3000'
1 row created.try to break your query in multiple lines in order to avoid
SP2-0027: Input is too long (> 2499 characters) - line ignored -
My touch screen is not responding, I have reset the phone, plugged into different charger and tried to update it to itunes but they will not connect because I cannot put my passcode in, HELP please!
ME TOO. NOW MY IPHONE 6 PLUS IS SAME LIKE YOU.
iphone is diabled- connect to iTunes because i forget passcode.
i cannot connect iTunes because it's always asking to enter passcode on iphone.
So, i cannot make restore my iphone 6+. And then, I cann't erase "device" in icloud.
My iphone is new. No icloud. didn't connect to itune backage.
That's why I try to connect iTunes but it need to enter passcode.
So, my iphone just keep "iphone is disbled-connect to iTunes".
IPHONE 6 PLUS -
Which version of SQL*Plus can connect to Oracle 8i Database?
Which version of SQL*Plus can connect to Oracle 8i Database?
I would like to know which version of SQL*Plus can connect to Oracle 8i Database?
Where can I download it?
(I have tried SQL*Plus version 11 and the program said it does not support the connection to Oracle 8i Database)
Thank you very much!By the way, what's your 8i database release version
SQL> select * from v$version;
Any SQL*Plus of 8i can connect to 8i Database.
Only SQL*Plus of 9.0.1 can connect to 8.1.7 and 8.1.6 Database
Only SQL*Plus of 10.1.0/10.2.0 can connect to 8.1.7 Database
Absolutely NO SQL*Plus of 11g can connect 8i databases
Regards,
Sabdar Syed, -
IDES 4.7, MMC - disp+work running but message server not reachable
Hi,
I loaded IDES 4.7 in Windows 2003 server with Oracle 9i. While starting MMC, the disp+work running but message server not reached causing the issue.
Please suggest,
Thanks,
PrasadHi,
Please find the logs from the file Dev_disp
rdisp/http_min_wait_dia_wp : 1 -> 1
Fri Jul 13 14:14:52 2007
***LOG Q0I=> NiPConnect2: SiPeekPendConn (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 8588]
ERROR => MsIAttachEx: NiBufConnect to plvprasad/sapmsDEV failed (rc=NIECONN_REFUSED) [msxxi.c 633]
***LOG Q0L=> DpLoopInit, nomscon () [dpxxdisp.c 1545]
Fri Jul 13 14:14:54 2007
CCMS: start to initalize 3.X shared alert area (first segment).
Fri Jul 13 14:15:31 2007
ERROR => MsISnd2: not_attached [msxxi.c 1296]
***LOG Q0N=> DpRqNoWpHandle, MsSndName () [dpxxdisp.c 4049]
ERROR => MsISnd2: not_attached [msxxi.c 1296]
***LOG Q0N=> DpRqNoWpHandle, MsSndAdmin () [dpxxdisp.c 4130]
Fri Jul 13 14:15:33 2007
***LOG Q0I=> NiPConnect2: SiPeekPendConn (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 8588]
ERROR => MsIAttachEx: NiBufConnect to plvprasad/sapmsDEV failed (rc=NIECONN_REFUSED) [msxxi.c 633]
Fri Jul 13 14:15:36 2007
ERROR => MsISnd2: not_attached [msxxi.c 1296]
***LOG Q0N=> DpRqNoWpHandle, MsSndName () [dpxxdisp.c 4049]
Fri Jul 13 14:15:38 2007
ERROR => MsISnd2: not_attached [msxxi.c 1296]
***LOG Q0N=> DpRqNoWpHandle, MsSndName () [dpxxdisp.c 4049]
Fri Jul 13 14:15:42 2007
ERROR => MsISnd2: not_attached [msxxi.c 1296]
***LOG Q0N=> DpRqNoWpHandle, MsSndName () [dpxxdisp.c 4049]
ERROR => MsISnd2: not_attached [msxxi.c 1296]
***LOG Q0N=> DpRqNoWpHandle, MsSndName () [dpxxdisp.c 4049]
ERROR => MsISnd2: not_attached [msxxi.c 1296]
***LOG Q0N=> DpRqNoWpHandle, MsSndAdmin () [dpxxdisp.c 4130]
ERROR => MsISnd2: not_attached [msxxi.c 1296]
***LOG Q0N=> DpRqNoWpHandle, MsSndAdmin () [dpxxdisp.c 4130]
Fri Jul 13 14:15:43 2007
ERROR => MsISnd2: not_attached [msxxi.c 1296]
***LOG Q0N=> DpRqNoWpHandle, MsSndName () [dpxxdisp.c 4049]
Fri Jul 13 14:15:53 2007
ERROR => MsIAttachEx: NiBufConnect to plvprasad/sapmsDEV failed (rc=NIECONN_REFUSED) [msxxi.c 633]
Fri Jul 13 14:16:13 2007
ERROR => MsIAttachEx: NiBufConnect to plvprasad/sapmsDEV failed (rc=NIECONN_REFUSED) [msxxi.c 633]
Fri Jul 13 14:16:33 2007
ERROR => MsIAttachEx: NiBufConnect to plvprasad/sapmsDEV failed (rc=NIECONN_REFUSED) [msxxi.c 633]
Fri Jul 13 14:16:54 2007
ERROR => MsIAttachEx: NiBufConnect to plvprasad/sapmsDEV failed (rc=NIECONN_REFUSED) [msxxi.c 633]
Fri Jul 13 14:17:14 2007
ERROR => MsIAttachEx: NiBufConnect to plvprasad/sapmsDEV failed (rc=NIECONN_REFUSED) [msxxi.c 633]
Fri Jul 13 14:17:35 2007
ERROR => MsIAttachEx: NiBufConnect to plvprasad/sapmsDEV failed (rc=NIECONN_REFUSED) [msxxi.c 633]
Fri Jul 13 14:17:56 2007
ERROR => MsIAttachEx: NiBufConnect to plvprasad/sapmsDEV failed (rc=NIECONN_REFUSED) [msxxi.c 633]
Fri Jul 13 14:18:16 2007
ERROR => MsIAttachEx: NiBufConnect to plvprasad/sapmsDEV failed (rc=NIECONN_REFUSED) [msxxi.c 633] -
Error message: can't install update, firefox is already running, but it is not
second request
an auto update failed a few days ago and now everytime I open FF I get an error message that says can't install update, firefox is already running, but it is not!
the parent.lock file is not open when FF is closed
in addition to this message, a box opens asking looking for a file
Help!hi
I had the same problem (update failed for normal user, update worked for administrator, but then normal user still got asked about installing the update even though it was already done).
Following the advice on http://kb.mozillazine.org/Software_update#Software_Update_not_working_properly worked for me, in particular to remove the update-related xml files.
good luck
kris -
My macbook pro is connected to wifi but it will not connect to the internet.
My macbook pro is connected to wifi but it will not connect to the internet. When I go on safari, it says that "Safari can't verify the identity of the website". Then I tried to update flashplayer but you need the internet to update it. All this only started happening after that Moutain Lion software was downloaded onto the laptop. Please help, I have been internet-less for a couple months now.
Hi rynhelp,
If you are not able to connect to the internet after installing Mountain Lion, see this article for information on how to start troubleshooting:
OS X Mountain Lion: Use Network Diagnostics
http://support.apple.com/kb/PH10984
You may find additional troubleshooting information in this article useful:
Troubleshooting Wi-Fi issues in OS X Lion and Mac OS X v10.6
http://support.apple.com/kb/HT4628
It is written for Lion but works for Mountain Lion as well.
Cheers,
- Ari -
Hi, I'm using a Mac Pro here. I am trying to connect it with my NAS hard drive. But i could not connect to it because i have an ethernet which connects to the intranet in my company and Air Port for the internet and it could not detect the the ip address after i input the correct address on "Connect to Server" window. Please help! Urgent! Thanks
I did not say it is not possible.
I said if your company networks are monopolizing both ports, you should talk to them about what options are available.
Maybe you can get the company Intranet over wireless if you change some configuration items such as Subnet Mask.
Maybe you can get on the Internet over Ethernet.
You really need to ask them, and do not let them blow you off because you have a Mac. If they balk, ask them how it would be done on a PC (becasue it will be the same on a Mac). -
I just signed up for cellular service for my iPad but it will not connect
I just signed up for cellular service for my iPad but it will not connect. Verizon told me to turn off wifi, switch the unit off and back on. It's just 'searching'. What do I do?
Try Settings > General > Reset > Reset network settings
-
My iPhone 4s will pair sucessfully with my iMac, but it will not connect so that I can transfer files via bluetooth. It says "bluetooth network not available" or "iMac not supported". Just insane. What to do now??
I can't pair my iphone 4s with my imac. It is very frustrating. I can walk by anything resembling a bluetooth and my iphone with pair...but not with my mac. Any assistance would be appreciated.
-
To open “Java Preferences,” you need to install a Java runtime, but you are not connected to the Internet. I have tried links that people have put on other discussions but all i get is a black screen please help!!
Try this link, warning, it's straight to download mode:
http://support.apple.com/downloads/DL1421/en_US/JavaForMacOSX10.7.dmg -
I am trying to connect my mac air with my tv but it is not connecting
hi i am trying to connect my mac book air with my tv but it is not connecting . please tell me the procedure .
Welcome to Apple Discussions
Help us help you. The more complete the description of your problem is (what OS you're using, what Application you're using, a full or screen shot of any error messages) the more assistance we can provide, and, the sooner we can provide it..
Are you connecting to a Cinema display or a New Television set. How are you connecting (HDMI cable, VGA cable, LAN cable, Wireless?) -
Check Proposal is Run but Checks are not Printed-need to cancel the run
The Accounts Payable Check Proposal is Run but Checks are not Printed- I need to cancel the run. How do I do this ?
Points will be awarded.
Thanks.
KathyRestart
If the printer stops during printing, for example because of a power failure, you will need to restart
the print program.
1. To do this, choose System Services Reporting.
2. Enter the name of the print program (RFFOUS_C) and select Program Execute.
3. Enter the data identifying the print run and enter the check number from which the
program should be restarted in the Restart field.
4. Select Program Execute again.
If there is a system crash during the print run but before any checks have been printed, you
should proceed as follows:
1. Correct the error that caused the system to crash.
2. Delete the check information. To do this, choose Environment Check information
Delete For payment run.
3. Restart the print program but do not use the restart option described above.
If there is a system crash during the print run and some checks have already been printed, you
should proceed as follows:
1. Correct the error that caused the system to crash.
This error may occur, for example, when a check lot is used up and the next lot has not
been maintained. In this case, the first thing to do after the system crash is to enter a
new check lot. See: Maintaining Check Lots [Page 7]
2. Delete the check information. To do this, choose Environment Check information
Delete For payment run.
3. Restart the print program but do not use the restart option described above.
4. Delete the print output from the print management files.
5. Now restart the print program, this time using the restart option, (see above).
PAGE 25 IN CHECK MANAGEMENT PDF FILE FROM HELP.SAP. TO DOWNLOAD CLICK ON BELOW LINK
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/FIBP/FI-BL-BM-CM.pdf
ASSIGN POINTS IF HELPFUL.
Maybe you are looking for
-
Hello All, I'm new to all things Oracle, and I'm not even sure if this is posible. I am using Application Express 3.1 and I'm trying to create a report that prints to PDF with fillable form fields. I am using RTF templates to create the layouts. I ca
-
How to change host to just use "machine name" in URL
I've installed WebCenter Suite on a MS Windows machine. Due to the ip setup I also had to install the Loopback adapter to get things to work. Now everything seems to run, but the URLs always have my machine name plus the domain it's on. Since I need
-
After a full installation of Solaris 10, dtlogin will not start up after wat it seems a couple of retries to find a correct video mode. During the installation process X started up just fine so it is not a hardware problem. I will look into this prob
-
HT4847 why can I not buy storage online?
Is it really possible that there is no way to manage/purchase iCloud storage via web browser? I used to be able to do this with the .ME service.
-
Unknown Icon on screen.. Please help...
Hey I have a icon that looks like a missed call but it's not. It's in the top center and it's a phone with two arrows pointing to the left and a #1 any body have any idea what this is? It poped up the other day I've pulled the battery out but no luck