LISTENER Started with a new domain

Hi,
we did refresh recently. We do have two different domains. unfortunately instead of one domain the listener started with another domain. Eventhough the listener files listener.ora and tnsnames.ora were perfect.
some one could please suggest me. From which files its taking the domain values. What are the files need to check.
lsnrctl status XXXL
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROCOCOL)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=usrns007.saipc.xxx.com)(PORT=1531)))
the listener.ora entry like
(ADDRESS_LIST =
(ADDRESS= (PROTOCOL= IPC)(KEY= EXTPROCOCOL))
(ADDRESS= (PROTOCOL= TCP)(Host= usrns007.erpssmc.xxx.com )(Port= 1531))
Thanks,
Srik

Hi Srik,
148.92.23.13 usrns217.saipc.xxx.com usrns217.erpssmc.xxx.com usrns217 usrns217-prod loghostIs it really required to point both the domains? Remove the old one!
Make it like
*148.92.23.13 usrns217.erpssmc.xxx.com usrns217 usrns217-prod loghost*
>But before refresh it worked fine. After refresh only the problem started. I dont think clone process will update hosts file.
Try running autoconfig and see if it complete successfully.
Thanks,
Anchorage :)

Similar Messages

  • How can I make textedit start with a new (blank) document?

    How can I make textedit start with a new (blank) document?
    Instead of it starting up with a dialogue box to select an existing or start a new document.

    @Alley_Cat thanks for the ideas.
    I turned off System Preferences > iCloud > Documents&Data - problem solved.
    I'll use DropBox instead  - it provides the options for a better experience.  I hope Apple keep working on iCloud so that it doesn't go the way of Moble Me.

  • "Layer 1 does not start with a new cell" replicator error

    Hi All,
    I recently sent a dual layer +R DVD off to our replication house and their system is returning a message that says: "Layer 1 of DVD-Video does not start with a new cell".
    I know from reading that the dual-layer breakpoint must be set to the end of a cell, but what does the word "cell" translate into for DVDSP4?
    I had the DVD DL+R set to Automatic and Non-Seamless for output for the break point. Should I just try setting the break point manually at the beginning or ending of a track that would be dubbed as just a little more than half the size of the content? (I know in OTP, the Layer 0 has to be bigger than Layer 1)
    Please Help!
    Cheers,
    Dusty

    Thanks both of you for your replies.
    Eric, I am currently exporting DDPs to send in to the replicator. I also emailed them asking if they accept this format for delivery. (Which I would hope they would, as it is, an answer to DLT of sorts) Thanks for bringing this up, DDP is new to me, as this is our first DL project for replication.
    Drew, to answer your reply, yes I have two viable markers (chapter markers) that show up in black, not grayed out, in the tab you mentioned under formatting. I chose manual break point selection for this last disc I burned and chose chapter 4 of that track. (chapter 4 and chapter 5 of track 6 are only options) I have to assume that the "automatic" setting was selecting chapter 5, as it had to see that as the last viable marker available to select, as described in the DVDSP4 manual.
    DVDSP4 says that all markers are considered cells- Or actually that tracks are cells and that the markers within them make up more cells. So my question, outside of DDP option, would be, "what truly constitutes a cell boundary in DVDSP4?" Is it the markers within the tracks or the beginning or ends of the tracks themselves?
    As a side note, I burned the disc that received the error, "Layer 1 doesn't start with a new cell" from an IMG i created from DVDSP4 through Disk Utility. Word is that IMG's somehow don't include breakpoint information.
    So at this point I don't know if it is the IMG or the fact that DVDSP4 wants the break at one of two possible chapter markers in track 6.
    (Some more background- this is a TV show season DVD, with thirteen tracks of video, each with 12-14 chapter markers a piece.)
    Any more thoughts to help clear the air on what constitutes a true new cell boundary?
    Thanks sooo much Eric and Drew, I know this a long read.
    Cheers,
    Dusty

  • Having trouble getting started with my new shuffle

    I am having trouble getting started with my new shuffle. any help?

    Hey there Feisty59,
    It sounds like you have a new iPod Shuffle, and want to know how to start using it. Here is a great resource for understanding how to use your iPod, and how to set it up and get music synced to it from iTunes:
    iPod shuffle User Guide
    http://manuals.info.apple.com/MANUALS/1000/MA1550/en_US/iPod_shuffle_4thgen_User _Guide.pdf
    If you have a different model of iPod Shuffle, choose yours from the following page and use that guide instead:
    Apple - Support - Manuals
    http://support.apple.com/manuals/#ipodshuffle
    Thank you for using Apple Support Communities.
    All the very best,
    Sterling

  • TS4006 My phone will not turn on, therefore I have received a replacement phone but am wanting to reset my old device. It is not locating it because it says it is offline however I cannot turn it on at all. Can I start with my new device and not reset the

    My phone will not turn on, therefore I have received a replacement phone but am wanting to reset my old device. It is not locating it because it says it is offline however I cannot turn it on at all. Can I start with my new device and not reset the old? Any help would be greatly appreciated. It's been a week without a phone

    That does happen.  It depends on how hard the server is being hit, as well as the connection speed of your system.  If you are on a windows system, you will want to disable any antivirus or firewall software during the download.

  • Laptop does not start with a new hdd

    I apologize for my English, I communicate through an interpreter.
    on my laptop hard drive broke. exchange rate fell to a sad zero.
    decided to replace with a new Seagate st320lm010, but encountered a problem:
    with the new drive laptop refuses to run, although on a different model laptop this drive worked just fine.after starting the bottom of the screen displayed message "press the Esc for startup"
    I need advice on how to fix it.

    possible difficulties of translation ... I can not run the laptop with a new hard drive! generally. inclusion in the notebook is displayed inscription "Press the Esc for startup" and nothing else does not produce any action. he wont want to run or boot menu or bios

  • Starting with a new iMac, best way to organise photos

    My old computer macbook pro, was overflowing with badly filed photos, projects and files. As I start with a clean slate, my new iMac my question is the best way to be keeping things, I use illustrator mostly for complex surface patterns.  I have photos galore in i-photo, some even have the same auto file number sequence as I use multiple sd cards.  For my photos, should I use bridge, i-cloud, is iPhoto old school now.  I am not going to just dump my old stuff over and want to do it properly, I promise not to be unorganised on my new iMac (promise).  Also, a brief explanation of when you would use Raw, over Lightroom, over Photoshop or visa versa, or is it just a personal choice.  The more I learn about software the more confused I get.
    Thanks & much appreciated
    Regards Vicky

    I do understand the reference to the cloud not being about a specific app. I also understand that you, Vicky, are not quite sure which app to use with your fresh start. I am not sure it is horrible to ask here which app(s), workflow, or organizational system might be best to institute, given access to all the various apps available in CC.
    I am not quite sure what you are doing, or what your previous workflow was, in part because of your mention of Adobe Illustrator for complex surface patterns. Were it not for that, between your title, and your reference to photos galore, I might suggest Lightroom. It is indeed in part a database, with an ability to handle, and organise, a very large number of photos. In addition to good developing and batch developing capabilities, as well as an ability to tag, as well as add to and manipulate metadata on both import and export, I find it useful. Were I to begin using Illustrator more, which I actually plan to do, I believe I'd either lean on bridge a bit more, very likely in conjunction with exported LR files, or see if it were in any way possible to set up AI as an external editor in LR, though at this point I've no idea if that is possible, or desired.
    As to a specific workflow and system of organization, I feel that is quite subjective. For myself, I find myself creating a Library in LR for each Year, (though I could see a pro event photographer creating one for each event), and then importing my SD cards by copying as DNG, embedding the RAW, and setting up the file name to be the YearxxxxMonthxxDayxx_Hourxx24MinutexxSecondxx, with folders created for each month and day. That way, everything is ordered chronologically, even within the OS folders, and the filenames are consistent and unique. I also add metadata for the creator, etc. I then create Collections for each shoot I'm actually focussing on. From LR I can jump to PS or external third party addons, and return after I am done.
    There are specific books and videos out there suggesting efficient ways of organizing and processing large numbers of images, and there is no, one right way. It largely depends on what you are comfortable with, and the way your mind works.
    Best of luck to you; I know I'll need a bit, and a bit of self-discipline to buckle down and institute a consistent system myself.

  • I want to wipe my computer clean and start with a new installation of Lion

    My MBP has been acting strange.  I want to wipe it completely clean and start with a brand new installation of Lion.  How do I do that?  I know I can access the recovery partition by pressing 'Command+r' during the boot process.  However, do I need to use the disk utility option first and erase my internal hard drive?  Then do I use the new lion instal option?
    Or if I choose the new lion isntallation from the recovery partition, does it erase my drive first?
    -jon

    What error?
    The sync is one way - computer to iphone.  The only exception is itunes purchases.  File>Transfer Purchases
    It has always been very basic to always maintain a backup copy of your computer.  Have you failed to do this?

  • External startup disks will not start with my new iMac

    My external devices which are startup disks will not start when connected to my iMac, although it appears in the bootable drive selections after the chime sound, using the option (Alt) key. I get the bootable drive selections and when selecting it all I get is a gray screen with the apple logo and that is it. No matter how long I wait the start up does not happen. I am sure that the external device is not damaged because there is no problem to use it as a startup device when connected to my MacBook Pro.
    Otherwise the devices work as they should. If I connect them to my iMac then they will appear on the desktop, etc. The only thing which does not work is that they cannot be used as startup disks, even though they work fine as startup disks if connected to my MacBook Pro.

    Based on your description it is very hard to tell what is going on.
    You appear to have an i7 iMac. That model was delivered with Snow Leopard (10.6.x).
    My guess is that your external disks may have a version of OS X that predates the version supplied with your new iMac. You cannot run an earlier version of OS X than what was delivered with your Mac.

  • HT1175 Time Machine wants to start with a new, full backup instead of using the existing one

    Hi, my Time Machine wants to start a new, full backup, instead of continuing with the existing one on the time Capsule.
    Looking a the Troubleshooting guide, I've found the following piece of info, which is, as 99% of the times with the troubleshooting guides, totally useless to resolve my problem...
    Message: Time Machine starts a new, full backup instead of a smaller incremental backup
    There are three reasons why this may occur:
    You performed a full restore.
    Your Computer Name (in Sharing preferences) was changed--when this happens, Time Machine will perform a full backup on its next scheduled backup time.
    If you have had a hardware repair recently, contact the Apple Authorized Service Provider or Apple Retail Store that performed your repair. In the meantime, you can still browse and recover previous backups by right-clicking or Control-clicking the Time Machine Dock icon, and choosing "Browse Other Time Machine disks" from the contextual menu.
    It should be noted (hence the uselessness of the guide) that:
    -I haven't performed ANY full restore
    - I havent changed my computer name
    - My computer has not had ANY repair, much less a hardware repair. Neither recently, nor in the 9 months I've owned it.
    Which puts me back to square one, with the marginal improvement that now I have a way of browsing my old backups.
    In the event I decide to start all over again, will there be a way for me to "sew" the two backup files?
    Or will I always have to go the silly way around?
    Anybody has any idea?
    Thank you for your time (machine/capsule, your choice;-)

    Hi John,
    no, that doesn't have anything to do with my problem.
    Just look at the image below.
    Time Machine thinks that the disk I've always used to do my backups has none of them.
    If I open the disk with Finder, obviously they are where they should be.
    It is even possible to navigate them as per the instruction reported above, but even following Pondini's advice #s B5 and B6 (which are more applicable to my problem) didn't solve the problem.
    Actually, not being a coder, I'm always scared of doing more damage than good when I have a Terminal window open.
    My question is: how is it possible that Apple hasn't thought of some kind of user command to tell the idiotic Time Machine software that a hard disk backup is a hard disk backup, no matter what?
    Estremely frustrating and annoying: I'm wasting HOURS in trying to find a solution to a problem that should not have arisen in the first place...
    Have a nice weekend
    Antonio

  • Please help me get started with my new ipad

    Hi all--merry Christmas!
    So, I'm away from home and just got my new ipad! Of course I want to play with it, but am not sure how to start. My full itunes library is on my iMac at home (and this is what I use when I sync my iphone). I do have my MacBookPro with me, but I don't use the itunes program on it very much. It looks like I need to connect my new ipad to my itunes in order to start using it....what will happen if I connect it to my laptop here, just to get going, and then later when I home I connect it to my iMac where my "real" itunes and all my apps are?
    Thanks for any info...I'm salivating to use it!!!

    Congrats you will love it!
    I don't see a problem with activating your iPad on your MBP. When you get home sync with iMac and set your iPad up as you like.
    Have fun!

  • HT1689 How do I automatically free up storage for podcasts that I have listened to with the new podcast app?

    Is there a way to configure the podcasts app to automatically discard the download file one you have listened to it?
    I know I can manually delete the entire podcast episode entry, but I'd rather just discard the download file .

    Thanks for getting back to me!
    It is connected over wireless. I don't have an RJ45 connection on the MacBook Air (although will purchase an adapter if needed). Even if I do have an RJ45 connection does this mean I can only ever use wired to view my external photo library?
    I suppose having the wired connection will give me the time to organise my photos and delete some of the rubbish (which I would have liked to do on my old MacBook first but it was running too slow, especially with such a big photo library - so I treated myself to a new MacBook Air so I did!).
    And I guess I could then put my favourite photos on the MacBook Air and have a separate library of older/lesser used photos on the Time Capsule and just access those as and when over RJ45 network cable. I prefer to use wireless as much as possible as the Time Capsule is normally stored in a room I don't use the MacBook or other wireless devices !

  • Getting started with a new Integration project

    Good day all!
    I am just in the beginnings stage of a development project for an enhancement to the CRM OD system. This project is related to the Opportunity and Product Revenue (PR) objects.
    In a nutshell, here is what I need to do. We have a custom object called 'Competitor Pricing' (called CP from here on) which is a listing of all our primary competitors and associated pricing for related items. Due to the nature of our business, this CP is region specific, so indexing is on: competitor, product type and region.
    Our sales people will quote multiple items to a customer, some of which they will win, some they may not. I cannot just call an opportunity a Win or Loose because, for example, if there are 5 items on an opportunity and we win 3 of the 5, then the opportunity is a partial win.
    For the 2 that we did not win, if the customer purchased them from a competitor, we need to annotate that at the PR object level. This is the crux of my problem.
    From what I have read, there is no way to associate a custom object to a child object PR is a child object). If I can get this association to work, I can get the rest of my requirements completed. I just cannot determine how to get the CP associated to the PR. Can anyone help or give guidance?

    For most people, this would not be possible. But with integration, I think you might be able to get there. You can definitely store the associations in custom fields using integration. What you would not be able to do is use an OOTB link to navigate from the child object to the custom object. But, you should be able to create a weblink field that would link the user to the CP record, and either popup the information in a new window, or navigate the user to the CP object.
    The link would need need to be based on the row ID of the CP record, and you would have to use integration to populate the values, but since you are already talking about integration, this isn't significantly more complicated to complete.
    Good Luck and let me know how it goes for you. My email is in my profile.
    Thom

  • I get an error message every time i try to open google, when I click on it it goes to the site, this just started with the new update

    It really annoying

    Try re-installing Java. See [[Using the Java plugin with Firefox]]
    A quick search for jqsnotify.exe on Google indicates that it is related to the Java quick start option.

  • HT201250 erase time machine backup and start with a new Mac from scratch

    see title

    Is this a case where you are getting a new Mac and will then transfer data from your old Mac's Time Machine backup with Setup Assistant (which is the ideal way)?
    See here.

Maybe you are looking for