Listener status during upgradation

Hi all,
We are upgrading 10.2.0.4 enterprise edition single instance to 11.2.0.3 enterprise edition single edition manually. What should the listener status while doing upgradation. This is my first upgradation project. Please suggest.
Thanks
Sandy

Normally when you do an upgradation, the database services needs to be down with only the database being opened with the option "startup upgrade".
The listener on the database server to be upgraded needs to be down. Make sure you take the backup of the listener.ora and the tnsnames.ora file located in the 10g Home and once when you plan up to delete this home after the database is upgraded to 11g, you have a new listener created with the 11g Home

Similar Messages

ORA-12514 & Listener Status Instance status Unknown issue

Dear All,
Database Version - 10.2.0.5.0
Operating System - Windows XP
I am using Oracle 10g version, which has two services (bit10g and ora10g) installed on it.
Service ora10g was working before upgradation of Database to 10.2.0.5.0 and it was fine.
On upgradation I was unable to start and connect using ora10g so I created another that is bit10g.
Service bit10g was working fine for quite a long time. The last I worked and connected was on thu and it was connecting with no issues.
Now when I am trying to connect to database today I am unable to connect as I am getting
ORA12514 - TNS:listener does not currently know of service.
Secondly I tried to search forums which guided me to check the Listener Status.
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:\Documents and Settings\Admin>lsnrctl status
LSNRCTL for 32-bit Windows: Version 10.2.0.5.0 - Production on 12-JAN-2013 11:42
:54
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=toshiba-arif)(PORT=1521)
STATUS of the LISTENER
Alias                     LISTENER
Version                   TNSLSNR for 32-bit Windows: Version 10.2.0.5.0 - Produ
ction
Start Date                12-JAN-2013 11:18:12
Uptime                    0 days 0 hr. 24 min. 43 sec
Trace Level               off
Security                  ON: Local OS Authentication
SNMP                      OFF
Listener Parameter File   C:\ora10g\product\10.2.0\db_1\network\admin\listener.o
ra
Listener Log File         C:\ora10g\product\10.2.0\db_1\network\log\listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=toshiba-arif)(PORT=1521)))
Services Summary...
Service "Oracle8" has 1 instance(s).
Instance "bit10g", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfullyFollowing is my listener.ora file
# listener.ora Network Configuration File: C:\ora10g\product\10.2.0\db_1\NETWORK\ADMIN\listener.ora
# Generated by Oracle configuration tools.
SID_LIST_LISTENER =
(SID_LIST =
    (SID_DESC =
      (GLOBAL_DBNAME = Oracle8)
      (SID_NAME = bit10g)
LISTENER =
(DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = toshiba-arif)(PORT = 1521))
)Please note that I am a developer with no DBA exposure.
So please guide me so that I will be able to resolve my issue.
Thanks & Regards
Arif Khadas

Once again Thanks Paul for your quick response.
I also have Oracle 9i installed on my machine but the service and Listener for 9i is stopped.
Following is the tnsnames.ora for 9i
# TNSNAMES.ORA Network Configuration File: C:\oracle\ora92\NETWORK\ADMIN\tnsnames.ora
# Generated by Oracle configuration tools.
BIT10G =
(DESCRIPTION =
(ADDRESS =
(PROTOCOL = TCP)
(HOST = toshiba-arif)
(PORT = 1521)
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = bit10g)
BIT_ORA9I =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = IAS)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = ORA9I)
ORA10G =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = toshiba-arif)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = ora10g)
ORA9I =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = toshiba-arif)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = ora9i)
INST1_HTTP =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = AH-IBM)(PORT = 1521))
(CONNECT_DATA =
(SERVER = SHARED)
(SERVICE_NAME = MODOSE)
(PRESENTATION = http://HRService)
CRCPROD =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.1.1.185)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = bridges)
IAS_ORA10G =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = IAS)(PORT = 1522))
(CONNECT_DATA =
(SID = ORA10G)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC0))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
BIT_ORA10G =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = IAS)(PORT = 1522))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = ORA10G)
)

Oracle SCAN Listener Status change

Hi,
During a high CPU Usage on one of the Node in Oracle RAC (11g R2) Environment resulted in automatic change of SCAN Listener Status to INTERMEDIATE.
When the CPU Usage on the node came down, the SCAN Listener status automatically became ONLINE.
From which log in Grid Infrastructure Home which shows the status change of Resources in Cluster.
Thanks,
Yusuf

Thanks for the information.
The log file mentioned in the previous post shows the output of lsnrctl status SCAN_LISTENER_<N>
Is there any logs which shows the status mentioned in the output of command crsctl status resource -t\
Thanks,
Yusuf

I just got my shipment and My Ipad mini is just shut down without reasons during upgrading. I'm doing restore it. Does it matter for the future use?

I just got my shipment and My Ipad mini is just shut down without any reason during upgrading. I'm doing restore it. Does it matter for the future use?
ACtually I really really don't want to use it anymore. I'm so disappointed.

PolishAngel756 wrote:
Some friends have told me that their phone can last up to 2 days without charging??
If they are getting 2 days without charging, it's unlikely they use their device very much.
A full day is pretty good....and if I'm careful, I can easily get a full day of usage.
For me, normal is charging the iPhone mid afternoon at work, but I use it a lot.
My typical usage is 35 mins of listening to podcasts, checking email, checking my RSS feed, and checking a few apps while I ride my bike when I first get up. Then listening to several podcasts at work.
I typically stream music while working out during my lunch hour and use the Men's Health Fitness app to track my progress.
By about 2pm I'm ready to charge the device as it's getting low (somewhere between 20% and 50%).
I leave bluetooth, Wi-FI, and location services turned on all the time.
Personally, I just do not see the point in going into settings to turn on the feature when I need it... just too much hassle. All of my listening to podcasts and music is via Bluetooth.
I know I'm not the heaviest user, but I just do not see how anyone can realistically make it two days on a single charge, it makes me think they simply do not use the features of the device and would be just as well served with a basic or feature phone.

Error while runnning autoconfig on apps tier during upgrade

Hi,
Error while runnning autoconfig on apps tier during upgrade from 11.5.9 to 11.5.10.2
below is the error message.
Enter the APPS user password :
The log file for this session is located at: /u01/app/tinst/tinstappl/admin/TINST_dba5/log/05031134/adconfig.log
AutoConfig is configuring the Applications environment...
AutoConfig will consider the custom templates if present.
Using APPL_TOP location : /u01/app/tinst/tinstappl
Classpath : /u01/app/tinst/tinstcomn/util/java/1.6/jdk1.6.0_18/jre/lib/rt.jar:/u01/app/tinst/tinstcomn/util/java/1.6/jdk1.6.0_18/lib/dt.jar:/u01/app/tinst/tinstcomn/util/java/1.6/jdk1.6.0_18/lib/tools.jar:/u01/app/tinst/tinstcomn/java/appsborg2.zip:/u01/app/tinst/tinstcomn/java
Using Context file : /u01/app/tinst/tinstappl/admin/TINST_dba5.xml
Context Value Management will now update the Context file
Exception in thread "main" java.lang.NoClassDefFoundError: oracle/jdbc/OracleDriver
at oracle.apps.ad.util.DBUtil.registerDriver(DBUtil.java:153)
at oracle.apps.ad.util.DBUtil.<init>(DBUtil.java:102)
at oracle.apps.ad.tools.configuration.FileSysDBCtxMerge.getDBConnection(FileSysDBCtxMerge.java:759)
at oracle.apps.ad.tools.configuration.FileSysDBCtxMerge.initializeParams(FileSysDBCtxMerge.java:147)
at oracle.apps.ad.tools.configuration.FileSysDBCtxMerge.setParams(FileSysDBCtxMerge.java:128)
at oracle.apps.ad.context.CtxValueMgt.mergeCustomInFiles(CtxValueMgt.java:1762)
at oracle.apps.ad.context.CtxValueMgt.processCtxFile(CtxValueMgt.java:1579)
at oracle.apps.ad.context.CtxValueMgt.main(CtxValueMgt.java:709)
Caused by: java.lang.ClassNotFoundException: oracle.jdbc.OracleDriver
at java.net.URLClassLoader$1.run(URLClassLoader.java:202)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:190)
at java.lang.ClassLoader.loadClass(ClassLoader.java:307)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:301)
at java.lang.ClassLoader.loadClass(ClassLoader.java:248)
... 8 more
ERROR: Context Value Management Failed.
Terminate.
The logfile for this session is located at:
/u01/app/tinst/tinstappl/admin/TINST_dba5/log/05031134/adconfig.log
Please let me know your suggestions to resolve this issue.
Regards,
Sreenivasulu.

Hi,
DB tier autoconfig was successfully completed.
We have already checked the above mentioned metalink ID's, but still the issue is same.
Can you please advice any other solutions.
Regards,
Sreenivasulu.

Error during Upgrade from 4.6c to ECC 6.0

Hi All,
We are facing an error when upgrading from 4.6c to ECC 6.0. We are facing this error on the table COEP - runtime object inconsistancy. What we found is there is ERP upgrade has created new extra fields in the table. In log file the error is specified as : Duplicate Field name, But we not able to find the duplicate field name in the table. Please kindly help as early as possible. The upgrade process is stuck.
Regards
Anil Kumar K

Hi Anil,
Is this issue fixed? Can i know how you fixed it?
replied to your message Re: How to adopt the index changes during upgrade.
Thanks,
Somar

Error in transaction KEA0 during upgrade

Dear All,
During upgrading the custmer system from 4.7 to ECC 6.0 we found some error in the transaction KEA0 while trying to activate the cross client for an operating concern.
The activation logs says that there are the syntax errors in the gereted subroutine pool: RK2O0100.
I however corrected the error and activated the code but again when I am trying to execute the same it gave me the same error and when I go to the sub routine pool I found that the changes are again undone and the previos version is activated. This happens repeatedly that the code is corrected and activated by me and says no error and ones I log off and login again it says the same error.
Help will be appriciated.
Thanks iin advance....
Abhi...

Dear Raymond,
Thankds for your help..........
I tring to run RKEAGENV it shows the error message with STOP button saying that the field WTGBTR not contained in the nametab for table CE1E_B1 and when Io run RKEAGENF it gives a short dump saying that entry for CE10100 is not allowed for TTABS.....
Please help.

Disck Space not enough during upgrade CUCM 9.1(2)SU1 to 9.1(2)SU2a

Hi,
I face an issues during upgrade my current CUCM 9.1(2)SU1 to 9.1(2)SU2a, it show with this error message "There is not enough disk space in the common partition to perform the upgrade, for steps to resolve this condition please refer to CUCM 9.1(1) release notes or view defect CSCuc63312 in bug toolkit on Cisco.com". I had check the bug id and got 2 way to do it:-
1. reduce the amount of traces on the system, but I not ready want to do this
2. install a COP file name: ciscocm.free_common_space_v1.0.cop.sgn
If I select option 2, will it have any risk? Is it mean 9.1(2) - inactive version will be clear out from disk space or it will clear out 2 version - active and inactive version from disk space?
I need have some advice on this before I perform.
Thanks.

Hi,
As per the following link
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/rel_notes/9_1_1/CUCM_BK_R6F8DBD4_00_release-notes-for-cucm-91/CUCM_BK_R6F8DBD4_00_release-notes-for-cucm-91_chapter_011.html
You will not be able to switch to the previous version after the COP file is installed. For example, if you are upgrading from Cisco Unified Communications Manager 9.0(1) to Cisco Unified Communications Manager 9.1(1) and the previous version is Cisco Unified Communications Manager 8.6, the COP file clears the space by removing the 8.6 version data that resides in the common partition. So after you apply the COP file, you will not be able to switch to the 8.6 version."
Additionally, regarding the first option, if you do not want to reduce the tracing levels you can still delete some old traces using RTMT which gives you an option of deleting the traces from the server as well as transferring / downloading them to your pc simultaneously by checking the 'delete from server' option on last page of log file collection option.
HTH
Manish

Encounter a problem during upgrade sap r/3 4.7 to ecc6

Hi expert:
i encounter a problem during upgrade sap r/3 4.7 to ecc6
in START_SHDI_FIRST step.
here is the error msg~
MSSCRESPDEFN.LOG
Msg 2812, Level 16, State 62, Server Jack, Line 6
Could not find stored procedure 'dbo.sap_upg_getrelease'.
setuser
i checked MS SQL DB and found out that i only got 'erp.sap_upg_getrelease' but not dbo owner.
can any one tell me how to solve this problem?~
thanks.
Regards
Jack Lee

It's the kernel for the shadow the correct?.
Regards,
Alfredo.

MAIN_SHDRUN/ACT_UPG ends during upgrade

During upgrade from CRM 6.0 to 7.0 EHP1 MAIN_SHDRUN/ACT_UPG phase ends.
In ACTUPG.ELG file I see:
******* LIST OF ERRORS AND RETURN CODES *******
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
DDIC ACTIVATION ERRORS and RETURN CODE in SAPACCI702.CRT
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1EEDO519X"Table" "CRMST_QUERY_OPP_BTIL" could not be activated
1 ETP111 exit code
I read SAPACCI702.CRT:
3 DDT012XAktiviere Tabelle "CRMST_QUERY_OPP_BTIL"
3 DDT402 Append-Struktur "ZCRMST_QUERY_OPP_BTIL" an Tabelle "CRMST_QUERY_OPP_BTIL" angefügt
2WDDT191 Erweiterungskat. "3" möglich, aber Include oder Subtyp ist noch unklassif.
1EDDT963 Feld "PROD_HIERARCHY" in Tabelle "CRMST_QUERY_OPP_BTIL" ist doppelt (Bitte überprüfen)
3 DDT013 Tabelle "CRMST_QUERY_OPP_BTIL" wurde nicht aktiviert
3 DDT014XAktiviere abhängige Tabelle "CRMST_QUERY_OPP_BTIL"
3 DDT402 Append-Struktur "ZCRMST_QUERY_OPP_BTIL" an Tabelle "CRMST_QUERY_OPP_BTIL" angefügt
2WDDT191 Erweiterungskat. "3" möglich, aber Include oder Subtyp ist noch unklassif.
3 DDT038 Aktivierung abhängige Tabelle "CRMST_QUERY_OPP_BTIL" erfolgreich
Oh... in german language... it's a problem for me. How can I check this structure? how?
Have you got any suggest?
Regards.

Hi Ganimede,
i have the similar kind of error can you please explain the steps for deleting the entry you have specified...
would be greate if you coulkd reply earliest
Thanks and Regards
Amar Ghuge

Manual request for listener status/Tnsping/Agent Ping is possible in 10g

I want to see listener status like this from 10g GC.
Is it possible ?
LSNRCTL for 32-bit Windows: Version 9.2.0.3.0 - Production on 01-NOV-2006 10:06:40
Copyright (c) 1991, 2002, Oracle Corporation. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=TCP)(HOST=server1)(PORT=1521))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 9.2.0.6.0 - Production
Start Date 20-OCT-2006 19:18:07
Uptime 11 days 15 hr. 45 min. 58 sec
Trace Level off
Security OFF
SNMP OFF
Listener Parameter File c:\oracle\ora920\network\admin\listener.ora
Listener Log File c:\oracle\ora920\network\log\listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC0ipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=server1)(PORT=1521)))
Services Summary...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "db1" has 1 instance(s).
Instance "db1", status READY, has 1 handler(s) for this service...
Service "db1_prod-server1" has 1 instance(s).
Instance "db1", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully

I have noticed in your other posting as well that you want to make a lot of customisations. I would suggest you read more on EM from this link and see what you can achieve.
http://www.oracle.com/pls/db102/portal.portal_db?selected=21

How to track changes made to the standard objects by SAP during upgrade ?

Hi All,
Can any one of you please let me know if there is any straight forward method to find any change made to the standard objects by SAP in different versions ?
Like for eg, during upgrade from 4.6c to ECC 6.0.
Thanks in advance.

> For eg , if SAP has made any change in the standard transaction IE02, in ECC 6.0 how will we come to know those changes?
There are two sources for that:
The "Solution Browser" (http://solutionbrowser.erp.sap.fmpmedia.com/) which lists the differences between source and destination release and the release notes (http://service.sap.com/releasenotes). You'd need to read here all those from 4.6 to ERP 6.0 (so 4.7, ECC 5.0 and ERP 6.0) to find out the behaviour changes.
Markus

Can we activate Classic General Ledger in ECC6.0 during upgrade from 4.6C

Dear SAP Gurus,
Greetings
My Client's technical team had upgraded their system from 4.6C to ECC6.0 and they had activated classic GL instead of New GL. And they had also activated classic withholding tax in place of Extended Withholding tax.
They are facing some error during posting of transactions (like generation of excise invoices, posting of WHT transactions, etc.) I told that it can be a reason of not activating New GL.
Is my understanding correct...?? Can we activate classic GL during upgrade from 4.6C to ECC6.0...??
In case of a new client built (with ECC6.0), can we activate the classic GL instead of the New GL..??
Does the system will work correctly in the long run if they had activated classic GL and classic WHT...??
Please clarify. Thanks in advance for your time and efforts
Regards,
Chaps
P.S. Points will be awarded for answers !!

Hi,
I think that you should read long text of OSS note 999614 carfully and you are
aware of the fact that you will have additional migration efforts in
case you need to migrate to new G/L later on.
In case you are convinced that this is the best way please feel free
to deactivate new G/L as described in note 999614.
Please make sure that you deactivate new G/L in all clients of your
new system in case there were already client copies done.
Yes this is possible and I would not automatically assume that
error during posting of transactions are due to New GL not being activated.
Note 756146 documents the issue and possible repercussions
of using Classic GL.
In the case of a new installation the new G/L accounting
is active by default in ERP. In principle, the use
of the classic GL is also possible for new customers, however,
SAP does not recommend it since this requires an additional
migration expense in later years.
Regards,
Aidan

My iPad was disconnected during upgrade. I've tried restoring and resetting. I just did an iPad erase in "find my iphone" and it still shows the itunes logo and the fire-wire cable on the screen with an arrow. It's currently plugged into my computer.

My iPad was disconnected during upgrade. I've tried restoring and resetting. I just did an iPad erase in "find my iphone" and it still shows the itunes logo and the fire-wire cable on the screen with an arrow. It's currently plugged into my computer. How do I remedy this?

Unable to update or restore
http://support.apple.com/kb/HT1808?viewlocale=en_US

Behaviour of ztables during upgrade

Hi all
I am trying to rationalise our ztables and would like to change the Delivery Class of some of our tables from 'W' to 'C' so that data can be transported through our landscape rather than manually entered on each system.
I've read the SAP help on the Delivery Class and note that the behaviour during Upgrade differs between 'W' and 'C'...:
<b>Client Dependant</b>
Class A and C: Data is only imported into client 000. Existing data records are overwritten.
Class E, S and W: Data is imported into all clients. Existing data records are overwritten.
<b>Client Independant</b>
Classes A, L and C: No data is imported.
Classes E, S, and W: Data is imported. Existing data records with the same key are overwritten.
...but I don't really understand what it means in practice. Is anybody able to explain to me what data is being imported and what the relevance of Client 000 is in this particular instance?
Please don't just copy the SAP help as I have already read it!!!
Thanks
Andy

Hi Andrew,
I can tell you something from what I have observed.
When we give class A the changes need to be done by us in all systems individualy.
When Class C, it asks for a transport and we can have same value transported
In this context client 000 is nothing but the client which you are using.So this would mean with A and C data is only in that client where you are using it or updating it.
So for other client you need to either make data manually as in case of A or in case of C you need to import the Transport.
From this behaviour it seems that for Class E,S and W the data that is being created in one client get's copied to other clients too on that system so it is like a system wide change in the data.
Hope this helps in getting some idea.
Regards
Nishant

Listener status during upgradation

Similar Messages

Maybe you are looking for