Listener with password

Hi all,
I've assigned a password to the listener by using set password, save_config and then reload
I can see the following new lines in the listener.ora:
#----ADDED BY TNSLSNR 18-NOV-2011 15:53:24---
PASSWORDS_LISTENER = F250412387B72A03
restarted the listener.
If I want to stop or do anything else, password is never requested. What´s the idea of having a password for listsner?
When is it used / requested ?
Thanks.

Diego wrote:
Hi all,
I've assigned a password to the listener by using set password, save_config and then reload
I can see the following new lines in the listener.ora:
#----ADDED BY TNSLSNR 18-NOV-2011 15:53:24---
PASSWORDS_LISTENER = F250412387B72A03
restarted the listener.
If I want to stop or do anything else, password is never requested. What´s the idea of having a password for listsner?
When is it used / requested ?
Thanks.It's using os authentication, just like sqlpus. Try it when logged on as an os use who is NOT a member of the dba group, and see what happens. ;-)

Similar Messages

Could not start the listener with a domain user

Hi all,
I am working on Windows 2003 with Oracle 10.2.0.2 !
With user "local system account", I can start the listener and I have no problems!
after chaning the user that runs the listener from local system account to a domain user, I cannot start the listener again!
(for the oracle service itself for the database, is it possible to change the user from local system to that domain user without problems)
attached the error message when starting the listener with cmd.
by starting the listener with the restart of the windows service, the listener crashed down after a few minutes
do I have to set additional permissions for that domain user?
thanks in advance
Stefan
C:\Documents and Settings\Administrator>lsnrctl start listener
LSNRCTL for 32-bit Windows: Version 10.2.0.2.0 - Production on 17-JAN-2008 11:51:29
Copyright (c) 1991, 2005, Oracle. All rights reserved.
tnslsnr wird gestartet: Bitte warten...
TNS-12537: TNS: Verbindung beendet
TNS-12560: TNS: Fehler bei Protokolladapter
TNS-00507: Verbindung beendet
32-bit Windows Error: 109: Unknown error

In this case I see three error messages:
TNS-12537:     TNS:connection closed
Cause:     "End of file" condition has been reached; partner has disconnected.
Action:     None needed; this is an information message.
TNS-12560:     TNS:protocol adapter error
Cause:     A generic protocol adapter error occurred.
Action:     Check addresses used for proper protocol specification. Before reporting this error, look at the error stack and check for lower level transport errors. For further details, turn on tracing and reexecute the operation. Turn off tracing when the operation is complete.
TNS-00507:     Connection closed
Cause:     Normal "end of file" condition has been reached; partner has disconnected.
Action:     None needed; this is an information message.
The most important is the tns-12560 error message, this means that an unsupported protocol exception was raised. Assuming you are using the same environment configuration when starting the listener with the local account and starting it with the domain authenticated user, then it has to do with permissions. Both the local administrator account and the domain authenticated user must belong to the ORA_DBA group, otherwise the user won't have enough privileges to start the listener.
On the other hand, make sure the sqlnet.ora file includes this line:
SQLNET.AUTHENTICATION_SERVICES= (NTS)
If you use a domain user name, log on under a domain with username and password which has administrative privileges on each node
~ Madrid

Check the listener is password protected and admin restrictions on from OEM

Hi All,
Is there any way to check the listener is password protected and admin restrcitions are on from OEM?
Thanks,
Mahi

mrak wrote:
hi,
if you try to run,
lsnrctl status and get the error :
TNS-01169: The listener has not recognized the password
then it shows that the listener is protected.
to proceed, issue:
LSNRCTL> set password
Password: <your password>
you should be able to run lsnrctl status after this
br,
mrakBut beware that starting with 10g, the listener uses the same os authentication as sqlplus, so if your OS account is a member of the dba group, you will be able to run lsnrctl without supplying a password, even if the listener is password protected. So while the above error is proof of password protection, lack of the above error is is not necessarily proof of non-password protection.

How to create PDF from Excel with Password Protection Using Visual Studio & Visual Basic

Could someone provide some VB code sample(s) to create a PDF file with password protection (Security Method - Password Security - Restrict Editing & Printing)?
I create a bunch of reports every week using an Excel 2010 addin that subsequently must be printed to PDF. I then have to manually edit the properties of each document in order to apply the printing restriction.
I'm using Acrobat X.
I've downloaded the SDK but have no idea which dll's to use or where to begin.
Thanks!
Ross

That's surprising & disappointing. I would have thought that this capability would have long since been requested.
Thanks for the heads up.

Sftp batch job with password?

Hi folks.
We're trying to develop scripts to automate the transfer of files from various Windows machines to a Linux server. Because the job involves moving multiple files to multiple directories, I wanted to use sftp's -B batchfile option to transfer the files instead of having to reauthenticate every time we transfer files to a different location. However, the man page says:
Batch mode. Reads commands from a file instead of standard input. Since this mode is intended for scripts, SFTP2 will not try to interact with the user, which means that only passwordless authentication methods will work.
I would love to use keys to get this done but unfortunately, the type of authentication on the server is out of our control and not likely to change (it's straight password). So, is there any way I can do this in batch mode with password authentication? I thought about using scp but, as far as I can tell, it doesn't have great support for delivering multiple local files (in different locations) to multiple remote locations. One would have to re-authenticate for every scp command, right?
Any help would be appreciated. Thanks.

Thanks for the recommendation, Endperform, but after reading up on expect and autoexpect, I realized I'd rather not have usernames and passwords hard coded into the script.
After much research, I think I've found a solution. It's a little odd but the Maverick Ant library does exactly what I need it to do. It can actually read an ssh profile, perform multiple transfers without having to re-authenticate and execute multiple remote commands without having to reauthenticate. The native Ant libraries can't do this. There is no sftp Ant task and the scp and sshexec tasks are lacking to say the least.
If anyone else runs into a similar situation, I highly recommend the Maverick tool.

How Do I Connect An Airport Extreme With Password to another Wireless Devic

We have a setup for two different wireless devices so that there are multiple locations that can get online, but the entire setup has no passwords assigned. We would like to assign passwords to both wireless devices so that only the appropriate people are getting online. How does one do this?
The first wireless device that connects directly to the modem from the phone company is a brand new Apple Airport Extreme. The computer that set up the device so that people can get a signal was from a PC that is directly connected to the Airport Extreme via an ethernet cable. Also connected to the Airport Extreme is an ethernet cable that goes (50-100ft) to another wireless device - by Netgear - which then sends out another signal to pick up wireless internet, which is the signal/network that I work from.
If we assign a password to the Airport Extreme, I'm guessing it will complete screw up the connection to the Netgear. How would that be dealt with? And, how could we then, if we wanted, set up a password for the Netgear as well. I've read some initial information on the user guide CD and online, but I don't know the terminology of whether these are networks or just wireless devices 'bridged' together, etc.
My biggest concern, is it works right now, but the owner of the devices wants to put passwords on it and I want to make sure we can keep it working even with passwords. Does anyone know how to easily set up passwords and can I do it from my computer even though they were initially set up by a PC? Or do I have to do it from the PC and if so, how, because I am completely a Mac person and am very unfamiliar with Windows. Thanks.

Question that I need to know now is how do we set up a password on the Apple Airport Extreme now, when it is already set up and working without one?
Open AirPort Utility.
Select your base station, and then choose Manual Setup from the Base Station menu. Enter the base station password if necessary.
Click AirPort in the toolbar, and then click Wireless.
Choose a password scheme from the Wireless Security pop-up menu.
Enter the password all users will need in order to join this wireless network.
AirPort Utility 5.1 Help: Password-protecting your wireless network
Also, are there different types of passwords and if so, what is the most reliable one so that we don't lose connections, time out or have any other quirks?
There are different types of wireless encryption. WPA2 and WPA are the most secure especially when used with a non-dictionary password. 128 bit WEP is passable in most situations but not very strong. 40/64 bit WEP is extremely weak.
There is really no general "reliability" issue with any of them. Some devices aren't compatible with some of them.
If when we assign a password to the Apple Airport Extreme and for some reason the Netgear stops working, how do we unassign/take away the password on the Airport to get it back to the current setup that we know does work?
Follow the procedure above but disable wireless encryption instead of enabling it.

I am using earphones, but the external audio of my mini ipad is still on. How can I turn off the external audio while listening with my headset?

I am using earphones, but the external audio of my mini ipad is still on. How can I turn off the external audio while listening with my headset/earphones?

Other than iMovie, GB always incorporates the audio files into the GB package. So just save or move the GB project to the external drive, and you're done - anything you import, edit or record will be saved to the external drive.

Please help me creating a new listener with different port#.

I have two instances in a server. both have different homes. I want to create a seperate listener for the second one i created.
But that is not happening.
here i tried to give name from LISTENER TO LISTENER1 & Port# from 1521 to 1524.
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = /apps2/oracle)
(PROGRAM = extproc)
LISTENER1 =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(ADDRESS = (PROTOCOL = TCP)(HOST = aixth53)(PORT = 1524))
When I check lsnrctl status with LISTENER1 , it still shows the other instance home with port#: 1521
Please help me creating a new listener with different port#.
Thanks,

marist89 wrote:
sb92075 wrote:
marist89 wrote:
sybrand_b wrote:
The listener is a broker only and doesn't play any role in normal communications.
It just forks a process or a thread, and that's it.And the listener is a single point of failure. Listener goes down, you can't connect to the db. That's why you need two listeners.If listener one goes down, then listener two goes down for exact same reason since it is a single executable file.I'm not playing tit-for-tat with you. Fact is, there are situations where people who are not you might want to use more than one listener.Some folks might want to jab a sharp pencil into their eye, too.
Just because you can do something, it does not necessarily mean it should be done.

Is there a way to print a pdf, which is secured with password?

I want to know a way to print pdf which is secured with password to print without throwing a error ?
Instead it has to ask for a password and print..

we need to have an associated application installed in the system for that particular fileYup.
does javax.print api works for pdf files and word documents?Nope.
There is something called (I think) iText which can handle PDF documents. No idea whether it includes a printing facility or not.
db

Unable to connect to Wi-Fi with password

Hello,
I'm having a slight issue with an iPod and iPad. As the title says, I'm unable to connect to wi-fi with password encryption (WPA2). I don't understand why! I can connect to wi-fi when I take the password encryption off. I've been able to connect to wi-fi previously with password encryption enabled. I live in a complex with three other neighbors. I'd prefer to not leave the encryption off. Does anyone have an idea as to how to solve this problem? I've already tried restatarting the iPod and restarting the wireless router. I tried to forget the network as well on both devices and reconnect them, however, when I try to reconnect them it tells me "unable to connect to the network". I do not wish to do a factory reset for either devices. Also, I'm unsure whether this is related or not, but I just updated my software recently to OS 6.1.2 ...my problem began a day after doing so.
Any feedback would be much appreciated! Thanks in advance. 8]
I have a Netgear WNDR3400 wireless router.

- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- iOS: Recommended settings for Wi-Fi routers and access points
I would try another encryption but still use encryption. Also try changing the PW.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.

Can't connect to WiFi-nets with password

I am not quite sure that this is the right place to post this question, but feel free to move it to where it belongs, any moderator:)
I have encountered a problem I didn't have earlier with my iBook trying to connect to WiFi-nets - it seems impossible to connect with passwords - only the net I have at home with Airport Express works, password included.
As soon as I find a net which doesn't require passwords, it all works.
I experienced this for the first time in February when I visited the newspaper I am working for, which is all Macintosh. They gave me the password to be able to log in to their wireless net, but I just received a message which reads something like An error occurred when attempting to log on to xxx net. Retry? OK. (Translated from Norwegian)
On the same trip, I could log on to public nets where you come to an opening page where you fill in username and pass, but when I visited my mother's where my brother has put up a wireless router, neither my mother's new iMac nor my iBook could connect and we received the same message and had to use Ethernet cables.
It seems to have gotten worse, since I the other day tried to connect to a public network here where I live and with which I have had no problems earlier, but now I receive that same error message.
I suspect that it may be caused by some minor bug in the latest update to Tiger, since another problem with Bluetooth, which went unresolved here, disappeared with that update. But instead, I have gotten this. Hopefully, my assumption is wrong and there is a solution out there:)
iMac G5 20", iBook 1,33 GHz Mac OS X (10.4.5) iSight
iMac G5 20", iBook 1,33 GHz Mac OS X (10.4.4) iSight
iMac G5 20", iBook 1,33 GHz Mac OS X (10.4.4) iSight

Nothing but perfect.
As for the log in page not appearing, I read in another topic here that sometimes it might help to try Firefox or IE instead of Safari as they might have coded it that way or something to that effect, but the problem is that Airport doesn't even connect to the net as it did earlier. The only thing which happens is that message.
In another forum, someone discovered that if the card is not firmly placed into the contacts, problems may occur, but since I have had no problems earlier and haven't touched the card and it was not installed by me, I very much doubt that it is the case here - and it works with open nets without passwords...

I can't open a PDF file with password with my iphone app

I can't open a PDF file with password with my iphone app, the app send me an error, but the password is correct. This only happend in the new version of iphone. In the latest version I didn't have this problems.

Can you please share the file with us at [email protected]? Also, can you please confirm that you are viewing the PDF in the Adobe Reader app rather than an app like dropbox, Mail or Safari?

Cannot login with password containing non-ascii characters

Hello,
I have web application, form based login. UTF-8 is specified "everywhere".
And it works, except for passwords.
If user register itself with password containing non-ascii characters, it is correctly written in database, but when doing either programmatic login or normal form based login, if fails.
If the password is only ascii, it works.
Username of login could be ascii or non-ascii, it doesn't matter, both works.
I'm using sun java application server 9.1.
jdbc realm.
I'm not using hashing passwords, just clean (now)
I tried configure realm Charset: UTF8 as last chance, but it doesn't work either.
The problem is only with non-ascii characters in password.
Any help very appreciated
Thanks a lot

hi,
I know all that, but that's not the case. My app uses preparedStatements, everything is properly configured, in all pages, utf-8 is going from user to db and back without any problems.
The only problem is with password field. As I am using form based login, with jdbc realm configured (again, nicely working when only ascii characters), I have very little chance to do something bad through the login phase.
I'm not talking about special characters, I'm talking about non-ascii characters, let's say - Chinese, arabish, Russian alphabet etc.
When user registers (my code), the fields are properly written to db. I have checked that, trust me.
But the Sun app server realm seems to have some problems with the password field.
(realm uses jdbc connection to mysql, the url contains all extra parameters to be sure about utf8. there is nothing more what can be configured...)
If I try other alphabet codes in login and ascii in password, it works. But soon, as I use other alphabet code also in password, it doesn't work anymore.
My only idea is, that I could try MD5 to create ascii only characters (I hope it works that way) on the client with javascript and then set Digest to MD5 in realm configuration. But still, it seems very strange. The clear way storage should also function? (now set Digest to 'none')
Is it a bug of Sun App Server?
thanks

Error when Connect to Access 2007 with password using OLEDB

Hi there,
I am seeing the below error when trying to Connect to Access 2007 with password using Crystal XI or Crystal 2008, when using the OLEDB to connection Access data.
Logon failed
Details: DAO Error Code: 0xd0f
Source: DAO.Workspace
Description: Unrecognised database format 'path to database\crs project database.aaadb
Get though when I use Access 2007 without password setup.
Many Thanks for any one can help.
Daphne Li

As a copy of this query has been posted to the CR design forum at 11:21, assuming this is indeed a design question.
Thus setting this thread as answered.
- Ludek

How to email a pdf file (attachment with password) using ABAP?

Hi Colleagues,
I
n abap, how do you email a pdf file that contains password?
(pdf with password, not the whole email).
A custom program is created. Inside this program, it
retrieves the spool number and converts it to a pdf file
(using function module '....abapspool...'). No parameter to put password.
I was able to do the above. The problem is how to put password on
the pdf file.
Once the user receives the email (say from hotmail or outlook) with pdf attachment, clicks on the pdf, it will as ask for an attachment.
sap version 4.7.
Questions:
- how to code in ABAP to include the pdf with password in an email
received from hotmail or outlook?
- any function modules or classes that can do the pdf password?
- do we need to install another technology or add-on application or
???? to do it? If yes, do we code in abap?
- any other ideas?
Thanks in advance.
Raymund

Hi Colleagues,
I
n abap, how do you email a pdf file that contains password?
(pdf with password, not the whole email).
A custom program is created. Inside this program, it
retrieves the spool number and converts it to a pdf file
(using function module '....abapspool...'). No parameter to put password.
I was able to do the above. The problem is how to put password on
the pdf file.
Once the user receives the email (say from hotmail or outlook) with pdf attachment, clicks on the pdf, it will as ask for an attachment.
sap version 4.7.
Questions:
- how to code in ABAP to include the pdf with password in an email
received from hotmail or outlook?
- any function modules or classes that can do the pdf password?
- do we need to install another technology or add-on application or
???? to do it? If yes, do we code in abap?
- any other ideas?
Thanks in advance.
Raymund

Listener with password

Similar Messages

Maybe you are looking for