Listening to 3rd party radio stream (via Tuner) gets interrupted by ipod

I was listening to an internet radio stream at the gym tonight when all of a sudden the phone just switches over and starts playing a song from my music library. The display on the phone still showed the Tuner app' in the foreground but with the audio from the ipod app' playing.
I switched to the ipod made sure it was paused and then tried to play Tuner radio again only to have the ipod cut back in a few minutes later. This kept happening until I left the gym.
I understan that if the internet stream drops out then the music will stop, but why is the ipod "kicking in"?

Thanks for responding!
No, I don't jump the gun and advance to the next song/podcast, it just plays through to the end and then the next song starts.
I don't think the JBL On Stage works the same way Ford's Sync does. I should have been more specific in how the car's built in iPod interface works. You cannot control the iPhone's iPod features from the iPhone screen when plugged in. The screen displays a message that it's in slave mode or some such thing and all control comes from the car's controls.
Things like the On Stage you still have control over the device while docked, so it may be reacting differently.
I looked at Circuit City for any kind of device that was more than just a dock/external speakers, but no luck there. Surprised that place is still in business, poor selection, no customers...

Similar Messages

Radio streaming via a router?

Since my uncle added a router between his Tower PPC Single 1.8 and his Dell, he can no longer receive any radio streaming. Considering he is an avid international radio listener, to say that he is peeved is an understatement.
Disconnecting the router from the entire system restores radio streaming 100%. So my question is: once a router is connected, do one or several ports need to be opened somewhere to allow radio streaming?
* Guy

Virtual PC
Thanks for the info, it'll allow me to open the appropriate ports *IF* I can figure out a few questions.
But first, here's more on the situation:
-I thought my uncle streamed his radio servers from an Airport Base station to his AEX. Wrong. He doesn't own a Basestation. He turned his PPC into an Airport Transmitter and that was enough.
- Here's a list of things that don't work since the router has been installed:
* His USB Logitech microphone will not transmit on either iChat (3.0) or Skype. The 'potentiometer' visibly works in the Sound System Pref, but the mike will not operate out of his computer. However, reception from others is OK in both Skype and iChat.
* Radio streaming via iTunes.
* Real Player radio. (Unable to connect to the server)
- His new router is a DI-604 by D-Link. In this link (http://docs.info.apple.com/article.html?artnum=93333), the router is an 'acceptable' router from Apple's point of view. Now I need to know: does this router have its own firewall on by default? My uncle's PPC firewall is off and he wants to keep it that way. I don't know much about the D-Link, he threw the box and instalation manual in the garbage already. Not only is he technophobic, he also considers manuals are for wusses...
- If I need to access the ports on the D-link, how do I do it: via the host server? Terminal? Some funky app?
- By tomorrow morning, I'm sure I'll have more questions to ask, but hopefully someone will have answers to the above.
EZ Jim? Ralph Johns?

Can I listen to iTunes Jazz Radio (Stream) in another room with Express?

Hi.
I am using an 802.11 a/b/g/n Extream. I listen to iTunes Jazz Radio (Stream) on my Mac Pro. Can I listen to it with the help of an Airport Express pluged into a stereo in another room? Please help.
Thank you.
W.W.

Can I listen to it with the help of an Airport Express pluged into a stereo in another room?
Yes, you can use an AirPort Express Base Station (AX) for streaming iTunes audio sources. The AX would just need to be configured as a wireless client by joining the wireless network created by the 802.11n AirPort Extreme Base Station (AEBSn).

No Audio on Radio Streaming via QuickTime Player

Hi Everyone,
I'm trying to listen to a radio station via the web that uses Windows Media Player. I have QuickTime and also downloaded & installed Flip4Mac but there is no audio coming thru. QuickTime does not appear to be launching when I open the radio channel. Any suggestions/help is welcomed.

Check out my Thread.
http://discussions.apple.com/message.jspa?messageID=3895109#3895109

Submitting 3rd party payment garnishments via ACH file format

Our Payroll Services is required by leglistation to submit child support garnishments electronically. We wish to submit the employee garnishment details in an ACH file format.
Do we have the ability to specifiy which details from IT0194 and IT0195 get created in the ACH file? If so how?
I have not been able to find this solution in configuration or a user exit. Is a customization required or a BADI?
We have been able to generate a Remittance Table from the 3rd Party Remittance Evaluation Run, but it shows a number of unnecessary and blank fields. We need other data, such as the Case Identifier Number, Employee Name, SSN, Status, Vendor ID, Order Type, Deduction $ Amount, etc...
Thank you.

Hi Manny,
A couple of more questions:
1. You mention PMW calls a function module which retrieves the HR info and fills the addenda garnishment info. Which function module is this?
2. You suggest we copy the standard format ACH and modify it. Which one is the "standard" and how do we modify it? Does this involve a user exit? Or is it just the configuration steps mentioned above? Can you provide more specific instructions on the config?
3. Can we produce multiple emplooyee garnishment info detailed records in one ACH file or is it one ACH file per employee?
4. About how long would this take to configure and set up?
5. We are able to generate an ACH CCD file, but we cannot get the SSN or Case ID to appear. Instead of these details, we seem to receive an SAP system generated HR ID for the record.
Thanks very much for looking into this.
Mihkel
Edited by: Mihkel Jurima on Oct 5, 2009 5:44 PM

Any indicators for 3rd party Radio alarm clock docks and iPhone 5?

Has Apple created any guidelines for the iPhone 5 when using an older radio alarm clock dock, using the lightning to 30 pin adapter ? My iPad is no problem, but my iPhone 5 (when I have it in hand) might be. Any ideas?

For Apple to see this you need to repost it at
http://www.apple.com/feedback

ARE THERE ANY 3RD PARTY 3D GAMES YOU CAN PUT ON YOUR iPOD????

GAMES LIKE THE GAMES WE HAVE ON OUT IPODS NOW. I TRIED GOOGLEING IT BUT WHAT CAME UP WAS SOME WEIRD GAMES THAT WERE A STORY YOU HAD TO READ AND SELECT WHAT YOU WOULD DO.

No, you cannot install third-party 3D games on your iPod.
As you've found, there are some text based "games" you can load using the Notes feature of the iPod.
For future reference, please do not post in all capital letters. In this forum, and many others, this is considered shouting. It's also difficult to read.

HT203421 Just purchased Quick 'n Easy Web Builder. It installed to my desktop, but will not open because it is a 3rd party. How can I get it to open?

Ooops! Disregard question. I had downloaded a demo from a website that failed to open. The purchase from Ap Store has opened.

Right click on the app and choose Open. You should then see this dialog box;
Choose the Open buton. Now you should be able to open the app uninpeded whenever you wish.

3rd Party 24" LCD on a Mac Pro via VGA

Hello,
I have my Mac connected to a 3rd Party 24" LCD via a KVM, which restricts me to using VGA for the connection. With my G5, I was unable to run at 1920x1200 until I upgraded to a Radeon 9800 Pro ME video card. I'm having the same issue with the NVIDIA card in my Mac Pro. It offers me 1920x1200 @ 76Hz which doesn't work with my monitor. I have checked a half dozen other monitors and none of them say that they will run at 1920x1200 and all of them recommend 1920x1200 @ 60Hz. I have that option with the 9800 Pro in the G5. Is there a way, short of changing video cards, of getting that option on the Mac Pro with the NVIDIA 7300 GT? If not, will the Radeon X1900 give me that option?
Thanks,
Bill

I found two solutions to this problem (though I'm running the ATI XT2600).
SwitchResX is available from <http://www.madrau.com>. The full featured program expands your video choices from the menu bar, but if you just need to make more resolutions available, the free SwitchResX app is all you need.
There is a hardware solution - the Gefen DVI Detective Plus lets you set parameters for a monitor and it then generates the appropriate signals to make the computer think that monitor is attached.
SwitchResX worked nicely for me, and is free.

Posting from 3rd party email addresses

Hi folks,
I have researched this matter as much as I can but am still having problems.
Anyone familiar with sending emails from 3rd party email addresses via Windows Mail (Vista Home premium)?
I use Windows Mail for my sins and am fairly familar with it.
I have verified my email addresses with yahoo and activated the verification emails sent.
I still cannot send emails via the server mail.btinternet.com.
Anyone familiar with sending emails from 3rd party email addresses?
This ia the error message:
Server: 'mail.btinternet.com', Protocol: SMTP, Server Response: '250 8BITMIME', Port: 25, Secure(SSL): Yes, Server Error: 250, Error Number: 0x800CCC7D
In Windows Mail
Incoming server is pop3.tiscali.co.uk
Outgoing mail.btinternet.com
My server requires authentication is selected.
Outgoing Mail server log on info.
Email User Name: mymainbt/[email protected]
Password : correct for above account
Remember Password: yes
Log on using secure password authentication: have tried with it on and off
Under advanced:
Outgoing server
Server address: 25
This server requires SSL: Yes.
As stated I have verified this account with BT Yahoo
I am able to set the same Windows Mail account to send via my gmail account easily.
Any suggestions please?
TIA David
Solved!
Go to Solution.

DavidUk1 wrote:
Hi folks,
I have researched this matter as much as I can but am still having problems.
Anyone familiar with sending emails from 3rd party email addresses via Windows Mail (Vista Home premium)?
I use Windows Mail for my sins and am fairly familar with it.
I have verified my email addresses with yahoo and activated the verification emails sent.
I still cannot send emails via the server mail.btinternet.com.
Anyone familiar with sending emails from 3rd party email addresses?
This ia the error message:
Server: 'mail.btinternet.com', Protocol: SMTP, Server Response: '250 8BITMIME', Port: 25, Secure(SSL): Yes, Server Error: 250, Error Number: 0x800CCC7D
In Windows Mail
Incoming server is pop3.tiscali.co.uk
Outgoing mail.btinternet.com
My server requires authentication is selected.
Outgoing Mail server log on info.
Email User Name: mymainbt/[email protected]
Password : correct for above account
Remember Password: yes
Log on using secure password authentication: have tried with it on and off
Under advanced:
Outgoing server
Server address: 25
This server requires SSL: Yes.
As stated I have verified this account with BT Yahoo
I am able to set the same Windows Mail account to send via my gmail account easily.
Any suggestions please?
TIA David
Hi. Welcome to the forums.
As mentioned, unset SSL when using port 25. You could try using port 587 (again without SSL set).
If you still get an error message when trying to send, can you post that ?
http://www.andyweb.co.uk/shortcuts
http://www.andyweb.co.uk/pictures

Issues loading to a 3rd party host

i created my site using muse and when i checked it out on business catalyst, everything looked great. but now when i try to upload it to my 3rd party host, the site keeps getting messed up. i've checked and rechecked my assets to make sure they're all connected (and they are). but again, loading using the FTP option on muse results in a messed up site...images are missing, text is moved around, just general crap that ruins the the site.
i've been reading through the forum messages on here to see what solutions others have come up with, and the ones i've found, i've tried to implement to try and fix the issues (like the asset linking).
what is the order of steps i should be taking to load? here's what i'm doing so far:
1) check all assets, update any that needed it
2) save site
3) export to HTML
4) upload using FTP to my host
am i missing a step or doing something i shouldnt be? i've deleted public_html folder multiple times and reuploaded everything but keep getting the errors.....
i also get the PHP error
1 Warning
Connection to PHP file failed. Unable to check if this web server supports PHP needed by Muse forms. Be sure the domain name entered in the FTP upload dialog is correct.
for which i guess i need to contact my host regarding (as per: http://forums.adobe.com/docs/DOC-3581)
any help would be greatly appreciated! this is incredibly frustrating!!

i tried uploading using FILEZILLA and everything worked perfectly!!
consider this solved!!

Backing up 3rd party apps with Time Machine

After what started out as a simple question...why won't my iChat stay connected now that i have installed OS Lion and spending over 2 hours with Apple Phone support and trying all the known trouble shoots, they told me the only thing I can now do is Back Up my MacBook Pro and do a HD erase and reinstall everything. So, this has me a little freaked out! I have never done this and am afraid of the results. In particular, my 3rd party applications such as all my Adobe Suite applications. I no longer have access to the initial start up and install Creative Suite CDs! At first apple support said Time Machine WOULD NOT back up 3rd party apps. Then I get an email and said they were mistaken and it WILL with a link to an article. Yet I see nothing about it with in the article I was sent. SO, has anyone successfully reinstalled their Mac from a Time Machine Backup along with any 3rd party apps?
What is also frustrating is that I asked if I could just go back to Snow Leopard since I had no issues with iChat using that OS. I was told I would have to do the same erasing of my HD either way to reinstall that OS. Ugh.
Thanks in advance!

Yes, as long as you let TM do a full disc backup (that is, you do not exclude anything in the TM backup settings) you will have a backup that allows a full system restore - puts everything back just as it was.
You can also clone your system using the shareware app SuperDuper or the donation-ware app CarbonCopyCloner
http://www.shirt-pocket.com/SuperDuper/SuperDuperDescription.html
http://www.bombich.com/
Both of these apps will make a true clone (literally, a bit-by-bit copy) of your hard drive onto an external drive. This clone will actually be bootable itself (you plug in the drive and hold the option key during startup then select the clone to boot from). You would boot from the clone, then reverse-clone it back onto your internal hard drive.
If you are really serious about being highly confident of not loosing files, you could use both - I keep a TM backup on one drive, and 2 clones on separate bus-powered hard drives.
P.S. even if you had not had any issues, you really, REALLY should be keeping regular, up to date backups anyway - things go flooey without warning sometimes and you risk loosing everything on your machine if you DON'T keep regular backup copies available.

All 3rd party apps Crash - Already Restored FIVE Times to date - Apple fix?

Since the 2.0 update my apps have had constant crashing issues. Usually after opening 8 or so apps in a row (very easy to do when downloading and testing many apps) ... Powering down and powering back up usually helped/fixed the issue, if temporarily.
Now, since 2.0.1 I've had times when one app will crash to the home screen, and from that point on ALL 3rd party apps immediately crash. Powering down the iPod, and powering back up does not fix the problem. Resetting the ipod (Sleep and Home buttons held) does not help either. I've also tried just Syncing the ipod, but this, alas, does nothing to help.
When it's come to this in the past I've had to do a complete iPod restore, which if it weren't just for the time taken restoring, the time taken re-arranging the icons/screens puts the process into the realm of a major pain. But having a way to assign apps to a particular screen on the ipod/iphone within iTunes is a topic for another thread.
Is there a way around this (crashing issue) that I'm just not seeing?
I'm tired of being and eff-ing guinea pig; this is not why I'm an apple user, this is one of the reasons I make fun of Windows people and get them to switch TO apple.

Well, now it's official, thanks to 3rd party apps and/or faulty system software my iPod is Dead.
When I created this thread I was having all 3rd party apps crash constantly, and instantly upon launch. The myriad of methods used to recover it to working order failed. I decided to do a Restore and use the last successful backup. It got to about the 95% mark on the restore and hung for 2 hours. The exact same place for 2 hours.
Not having the ability or patience to wait for my iPod to get done tying up my computer, I reset it. Now, all I've got is a $299.99 Paperweight that constantly displays a nice and shiny apple logo on it's screen.
An attempt to restore it to factory settings only gave me an error dialogue box:
The iPod "Kuhnaydeein's iPod" could not be restored.
An unknown error occurred (0xE8000035).
Now what am I supposed to do? I don't live near an Apple Store, the only place that sells apple merch is the store where I work, in the department I work. I know our policy on taking back/exchanging iPods.
What I've failed to mention is how I'm EVER going to sell one of these to someone if there's a chance they'll just be getting the same FAULTY Hardware/Software I'm now stuck with? Is Apple going to come to the rescue, read this post and replace my iPod? I sincerely hope they read this, because they don't give the slightest hint at any Direct Email addresses on the Apple.com website. (What's with that anyway?)
So what do I do now? RESTORING IS NOT AN OPTION.

All 3rd Party PlugIn Pref's get reset after InDesignCrash

AdobeInDesignCS 6
Steps to reproduce
1. Install third party plugins
2. Create Preference Settings
3. save and quit out of InDesign
4. launch InDesign, Verify pref settings.
5. Force Quit InDesign
6. Launch InDesign/Verfiy pref settings and they will not be there.

Well, now it's official, thanks to 3rd party apps and/or faulty system software my iPod is Dead.
When I created this thread I was having all 3rd party apps crash constantly, and instantly upon launch. The myriad of methods used to recover it to working order failed. I decided to do a Restore and use the last successful backup. It got to about the 95% mark on the restore and hung for 2 hours. The exact same place for 2 hours.
Not having the ability or patience to wait for my iPod to get done tying up my computer, I reset it. Now, all I've got is a $299.99 Paperweight that constantly displays a nice and shiny apple logo on it's screen.
An attempt to restore it to factory settings only gave me an error dialogue box:
The iPod "Kuhnaydeein's iPod" could not be restored.
An unknown error occurred (0xE8000035).
Now what am I supposed to do? I don't live near an Apple Store, the only place that sells apple merch is the store where I work, in the department I work. I know our policy on taking back/exchanging iPods.
What I've failed to mention is how I'm EVER going to sell one of these to someone if there's a chance they'll just be getting the same FAULTY Hardware/Software I'm now stuck with? Is Apple going to come to the rescue, read this post and replace my iPod? I sincerely hope they read this, because they don't give the slightest hint at any Direct Email addresses on the Apple.com website. (What's with that anyway?)
So what do I do now? RESTORING IS NOT AN OPTION.

3rd party software to sync notes for iPod touch?

Does anyone know of a 3rd party software that will sync notes for the iPod touch? I've done a search and can't find anything. There is one called iNote but that isn't for the touch.
Thanks

There is one called iNote but that isn't for the touch.
iNote works fine on the iPod touch. What makes you think it doesn't?
http://www.itunes.com/app/inote

Listening to 3rd party radio stream (via Tuner) gets interrupted by ipod

Similar Messages

Maybe you are looking for