Listening while recording through headphones!

So, I am currently using an M-Audio Profire 610 interface connected via a 6pin to 9 pin firewire to record some vocals and acoustic guitar parts with an Audi0-Technia AT2020 condenser mic. EVerything is hooked up fine and I can record with garageband well. My question is how can I make it so that I can here myself talking or singing into the mic whilst wearing headphones connected directly into the Profire interface. I have both the audio inputs and outputs for both garageband and my MB Pro (Unibody Aluminum) set to the go through the Interface but i cant hear anything through my headphones. Any suggestion would be a great help!

Do you have monitoring turned on in track info?

Similar Messages

  • Some fields are missing while recording through shdb

    Dear Abapers,
                   I am doing bdc for F-27 t.code.Some fields,cobl-gsber(business area),cobl-kostl(Cost center) are missing while recording through SHDB.But when do it manualy the fields are displaying.Also i have ddded those fields manualy in the program,stll the fields are not getting captured.May anyone pls help me,why this problem is happening?What is the solution for this.
    Thanks in Advance.

    hi
    i can tell u that few transactions wont suffice us with BDC,so for such transactions we do bdc with similar kind of transactions.
    ie., The transactions FB60 and f-63 both are meant for Parking.
    But we cant do bdc for FB60 Parking. So we do bdc for f-63.
    similarly when we do bdc for vendor few fields wont appear...in that case, we use bapi for it....
    So try to find an appropriate bapi or similar tcode which will suffice ur need
    hope its clear.
    Regards
    Sajid

  • How do I listen to my guitar while recording through my computer speakers?

    Lost all of my audio settings when I upgraded to LION. Now I cannot hear my guitar while recording in GB. I can hear the audio during playback, but not while recording. I have a simple guitar USB cable.

    anorakman wrote:
    I cannot hear my guitar while recording [...] I have a simple guitar USB cable.
    http://www.bulletsandbones.com/GB/GBFAQ.html#usecomputersspeakers
    (Let the page FULLY load. The link to your answer is at the top of your screen)

  • Listening While Recording Help?

    Hi, I have been useing GarageBand for a while now and have been recording acoustic guitar through both real instrument and electric setting. Now that I'm confident in the program and my musical talent, I want to up the bar a bit by getting a better recourding. The major problem is I would like to listen to myself play while recording. Not being able to hear the effects while playing kinda eliminates the use of them.
    Recording is not a prob, but I get all this noise and I can't figure out how to eliminate it. Especially when I use the preloaded amps and stompbox. Its almost like feedback but not really. I can only explain it as white noise, like the amps are turned up to loud or something.
    My original setup consisted of acoustic recorded via usb webcam mic into GB. As I said this was sufficant until now.
    Things I have done to eliminmate the noise issue:
    * Bought a real microphone connected via built in input cause I thought the webcam mic was either to crappy or to sensitive. *Did Not Work*
    *Bought an M-Audio FastTrack connected via USB.
    Mic/M-Audio/Mac. Sound not quite as bad but can not hear myself play via headphone jack on M-Audio *Did Not Work*
    *Played around with different volume levels on anything I could find dealing with volume. *Did Not Work*
    *Various other things *Did Not Work*
    How can I eliminate the noise, get a clean recording while at the same time being able to listen and hear effects as I play?

    If your able to record through the audio interface, you probably need to turn the monitor on and use the headphones through your computer not the interface. Thats how i do it at least.

  • Listen while record

    Hi, I`m recording my voice using a Audigy 2 ZS and my headphones.
    I want to listen my voice while recording but I can't, I only can listen my voice after recording when playback. I need return.
    Do I need to configure my Audigy?
    Can you help me?
    Roberto

    Robertorubio,
    Unmute the Microphone from the surround mixer and you should hear your microphone while recording.
    Jeremy

  • Listening while recording

    Can I listen while I record my own voice, using a headset or a mic and headphones?

    can I listen to my recorded guitar track WHILE I record the bass track?
    You absolutely can. Just record enable the bass track, hit record and as it records, the first Track and any other recorded Tracks will play (unless you mute them or solo the Track recording.)
    btw, I don't think there's anyone out there who can really record only to a waveform. Although I sometimes watch it to help me stay on the beat.

  • While recording  through SHDB for XD01 mobile number and E-mail ID is not appearing

    While recording for XD01 through SHDB fields mobile numebr and E-mail id is not reflecting.
    Kindly do the needful.

    This one is easy, try with keywords : SHDB XK01 address (always use simple words, then restrict selection if required)
    (Also having solved same problem some years ago, can help too , the first time I got 653536 - Recording communication data cannot be processed version 1, SAP had not yet created/added the knowledge document to OSS search)
    Regards,
    Raymond

  • Difference in value while recording through SHDB

    hi guys,
    well i want to know why there is difference when i do recording. I am using the transaction 'VD01'
    while  recording i get
    perform bdc_field       using 'BDC_CURSOR'
                                  'ADDR1_DATA-TRANSPZONE'.
    perform bdc_field       using 'ADDR1_DATA-NAME1'
                                  record-NAME1_004.
    perform bdc_field       using 'ADDR1_DATA-SORT1'
                                  record-SORT1_005.
    perform bdc_field       using 'ADDR1_DATA-STREET'
                                  record-STREET_006.
    perform bdc_field       using 'ADDR1_DATA-COUNTRY'
                                  record-COUNTRY_007.
    perform bdc_field       using 'ADDR1_DATA-TRANSPZONE'
                                  record-TRANSPZONE_008.
    perform bdc_field       using 'ADDR1_DATA-LANGU'
                                  record-LANGU_009.
    but the example which i am practicing there it is
    PERFORM bdc_field       USING 'KNA1-NAME1'
                                      lw_customer-name1.       "Name.
        PERFORM bdc_field       USING 'KNA1-SORTL'
                                      lw_customer-sortl.       "Search Term.
        PERFORM bdc_field       USING 'KNA1-ORT01'
                                      lw_customer-ort01.       "City.
        PERFORM bdc_field       USING 'KNA1-LAND1'
                                      lw_customer-land1.       "Country.
        PERFORM bdc_field       USING 'KNA1-SPRAS'
                                      lw_customer-spras.       "Language.
        PERFORM bdc_field       USING 'KNA1-PSTLZ'
                                      lw_customer-pstlz.       "Postol Code.
        PERFORM bdc_dynpro      USING 'SAPMF02D' '0120'.
        PERFORM bdc_field       USING 'BDC_CURSOR'
                                      'KNA1-LZONE'.
    well i just want to know why do i get 'ADDR1_DATA-NAME1' but in example it is 'KNA1-NAME1' and so on to other fields.
    kindly let me know what  is happening here

    Hi,
    When you record the transaction VD01 in the initial screen a check box is there for central address managament.
    If you check that box different screen will be called for the adress management, so the structures used in the screen is different.
    Uncheck the check box "Use central address management" while recording you will get what you are expecting.
    Regards
    Praveen

  • Logic pro 9 listening while recording

    Can someone tell me the setting in Logic Prefs where I can hear  as I am recording in headphones?

    Go here:
    Read:  Configuring your Audio Hardware.
    http://documentation.apple.com/en/logicpro/usermanual/#chapter=2%26section=0

  • How to Hear Metronome in Headphones While Recording Through Audio Interface - Help!

    Hey everybody,
    So I've been trying to work through this problem for 3+ hours now and I'm stumped. It's very frustrating as it is such a simple problem. Right now I'm recording acoustic guitar through an audio interface - guitar sound goes to microphone, microphone goes to interface, interface goes to audio jack in Macbook. Pretty simple setup. I can even insert a splitter into the audio jack on the Macbook which will allow me to hear what I am playing through the interface in my headphones, which is what I wanted. However, when I hit record and the metronome starts playing, as I want it to, I can't get the metronome to play through my headphones - they will only play through the speakers. How can I get around this? Is it even possible, or do I need an audio to USB interface so I can have a set audio in (through the USB) and a set audio out (through the audio port)? Again, your help would be much appreciated as I am completely stumped.
    Cheers!

    In Logic Pro 9 (and X) you can assign different devices to the In- and Output, so I don't understand why you wouldn't be able to get sound in through the microphone and out through the headphones. You can even combine the ouputs into a Multi-Output device to send the same sound simultaneously to all outputs.
    You can also aggregate all your in- and outputs into an Aggregate Device, then you can use any of your outputs and any of your inputs inside the same Logic project (on the channel strips).
    Setup in Audio MIDI Setup (separate app, part of any OS X install, can be found in the Applications>Utilities folder)
    Setup in Logic Pro>Preferences>Audio>Devices (apart from colorscheme, it's the same in LP 9 and LP X)

  • How do I record audio, and listen to it through headphones at the same time? Macbook Pro

    When using midi, everything works great!
    But now I want to record the audio from a piano.. I can't work out how to listen to what I'm recording?
    The same slot is used for the output and the input, so I'm a bit stuck.

    Hi, Jake.
    Are you using an external sound card?
    If so, go to system preferences under the apple in the top RH corner of the menu bar. Open sound and select thus device as your audio output.
    OS X automatically defaults to the laptop's internal speakers ans mic input.
    Hope this helps,
    Regards,
    Scorpii.

  • Listening while recording---dumb question?

    I'm new to GB and kind of learning-as-I-go, but I can't seem to figure this out. This is my first recording, and I recorded an electric guitar track. I want to lay down a bass track but how do I listen to my guitar track while I'm playing bass? I'm seriously not a good enough musician to play bass to a silent track just looking at the waveform.
    And on an unrelated note, even with Monitor On, I cannot hear my electric guitar through my computer speakers whole I'm playing (nor my headphones, for that matter).
    Any help is appreciated!

    can I listen to my recorded guitar track WHILE I record the bass track?
    You absolutely can. Just record enable the bass track, hit record and as it records, the first Track and any other recorded Tracks will play (unless you mute them or solo the Track recording.)
    btw, I don't think there's anyone out there who can really record only to a waveform. Although I sometimes watch it to help me stay on the beat.

  • High-frequency permanent distortion while recording through Line-In

    Hi Everyone!
    I'm recording music from my MiniDisc Player connected with Audio Cable to Line-In port. I'm using Real Instrumen track for this. When I record or even only listen to the music I hear permanent High-frequency Tone in background. I can record with no problems but my recordings are always accopanied with this distortion. I've checked it out also on Windows (Boot Camp) and there are no such noices. Somebody knows what could help? Maybe it's something with audio drivers?

    In Multitrack view, Options, there is a Monitoring option where you should be able to set Audition Mix to Always.
    This doesn't appear in Edit View.

  • I recently used Bluetooth speaker with my iPhone 4S  Now I  am unable to listen to music through headphones Iphone speakers, even when device is no longer recognised by phone.

    Please advise

    Hey Jennymagee,
    Thanks for the question. I understand you are experiencing issues with your iPhone 4s. The following resource may provide a solution:
    iPhone: No sound or distorted sound from speaker
    http://support.apple.com/kb/ts5180
    1. Verify that the volume is set to a level you would normally be able to hear.
    2. Ensure that there is nothing plugged in to the headset jack or the dock connector.
    3. If the iPhone is in a protective case, make sure that the speaker port isn't blocked by the case.
    4. Make sure that the speaker and dock port aren't clogged with debris. If necessary, clean it with a clean, small, dry, soft-bristled brush. Carefully and gently brush away any debris.
    5. If an audio issue occurs when using a specific application, try testing other applications to see if the issue persists.
    6. If the iPhone is paired with a Bluetooth headset or car kit:
              - Try turning off Bluetooth.
              - If you experience difficulties with the Bluetooth feature, follow these troubleshooting steps.
    7. Restart the iPhone.
    8. If restarting doesn't fix the issue, ensure that your iPhone is updated to the latest version of iOS.
    9. If the issue is not resolved after restoring the iPhone software, please contact Apple Support.
    If the issue persists, please follow the last step by contacting Apple Support for support and service options.
    Thanks,
    Matt M.

  • How do I get live audio playback through headphones while recording a performance of a song on iMovie through external mic?

    Hard to explain but hopefully I can get the question across. If anyone can give me some tips on how this will work it would be greatly appreciated!
    I like to perform songs of my own in iMovie and upload them to YouTube. The problem I am running into is when I try to record the song through an external microphone the sound will not playback (while recording) through my headphones. The audio and video do record just fine but I would like to be able to hear through my headphones WHILE I record into my external microphone so I can hear how it sounds as I sing. Is this possible? As I stated before, everything works fine but I cannot hear how I sound WHILE I am recording through my headphones. Thats all I want lol. Thanks!!

    Did you ever find the answer to this problem? I have the same issue.
    Cheers
    DAn

Maybe you are looking for

  • Can't use Aperture in Mac OS 10.9

    I have installed Mac OS 10.9(not upgrade) in my Mac Book Air(2011) and then install Aperture 3.0.2 (Box Set) But it can't use and the Mac OS said "You can't use this Aperture(3.0.2) in this Mac OS" and I can't update it at AppStore! *** I have joined

  • ITunes album artwork screen saver possible with external library?

    I just moved my iTunes library to an external drive to free up space on my MacBook, and I was wondering if there's a way to still use the album artwork screen saver when the external drive is not connected? I still have my artwork folder on my intern

  • Vendor interest

    Hi guys, Let me know if someone had already worked with vendor interest. Is it possible to treat it using payment terms? For my understanding  we can't. Does someone know another way? Thanks

  • HELP! Oracle 8i/RedHat 6.0 installation going nowhere

    I downloaded the JRE 1.1.6v5, put it into /usr/local/jre. I set the DISPLAY to localhost:0.0, set xhost to permit localhost. But I can't bring up the OUI. But when I run runinstaller (or runins.sh), it complains saying: Class not found: oracle.sysman

  • Oracle PL/SQL Web service - dynamic parameters... possible?

    Oracle 11.2.0.3 - newbie on web services! Currently we have a pl/sql web service taking in 2 static parameters and returning a varchar2 response. I was asked today if it's possible for a web service to take in a dynamic set of parameters and return a