Listing a business to show up in Maps

I've had several occasions to demonstrate the iPhone to my clients recently. Part of the demonstration was showing them how it's possible to look up businesses in Maps and get directions to them. I typed things like "Dentist 15044" and it would show some dentists in zip code 15044 but not all of them and more importantly not them. They show up in Google Maps but don't show in the top 10 so they don't seem to warrant a pin. How does one go about getting "pinned"?

I believe you can buy a listing for GoogleMaps through Adwords so you'll appear as a featured listing in the area.

Similar Messages

  • How do I get all my pins (bookmarks) to show up on maps rather than choosing one from the bookmark list?

    How do I get all my pins (bookmarks) to show up on maps rather than having to choose from the bookmark list? I can see my list getting very large and more cumbersome to search. In google maps, all my starred locations show up on my map.

    Have you let Apple know you would like to see this feature? They do not participate in the forum, and their only source of user feedback is the feedback page. To let them know you would like to see a feature, go to the feedback page at www.apple.com/feedback and select the appropriate link.

  • How to list your business on Apple Maps Local Search in UK

    Hi,
    As a business Owner of Mattressman , i would like to Know where to list my business, to appear in Apple local search listings in the UK,
    I have only found this information, http://gspsa21.ls.apple.com/html/attribution.html
    and maybe i need to list fully on www.Yelp.co.uk
    but the Yelp web site data does not match the data on the iphone Apple Maps, as i cross referenced some telephone Numbers
    Any idears
    Cheers
    Andrew

    Try THIS.

  • Is there any component in flex to show/edit digital maps, lattitude, longitude etc?

    Is there any component in flex to show/edit digital maps, lattitude, longitude etc?

    If I do this then I will have my video player in fullscreen disappear for a moment and then reappear out of fullscreen, and I want it not to disappear, but to just jump to the other state fully resized and repositioned with no glitching in between states.
    Than you will need to implement your own solution which meets your specific design goals. That's the nature of the beast my friend.
    As far as I know dynimic skin parts have another meaning - creating more than one instance at runtime. Also I've read just now (again) partAdded and partRemoved are called on component initialization and skin change. So basicly if I change the skin, it makes sense to remove the eventListeners from the old skin parts. But still, I've read on many places that if an object has event listeners attached to it it will Not be GC unless they are weak, so it will be stuck in memory forever.
    So looking at the VideoPlayer and it's skin parts, I'm not seeing any event listener being removed when I remove the instance I have of the VideoPlayer. Why is that? Why the component does not remove it's skin parts event listeners?
    Are you changing skins? If so, I bet the parts would be removed as expected. The partRemoved method is not being called because it's not needed. If you remove the parent component, than any reference encapuslated within that component are removed as well.Fire up the profiler if you don't believe me.
    I'm interested in the skin parts and states relation. With includeIn and excludeFrom you define in which states the component is added to or removed from as a child (element). So If I have a skin part which is required=true and I have 2 states from one of which it is excluded... whouldn't that result in a runtime error since the part is not there but it is required?
    I'm pretty sure that it only checks if the instance exists, and does not care if it has been created and added to the display list. I do not really know for certain though. This could easily be answered with a simple test.

  • Unable to issue "show ip port-map" command

    We are unable to issue the command "show ip port-map".
    We logon to the router. Issue "enable". Get the privileged exec command prompt (router8#). When we issue "show ip p?", the list returns "pim", "policy", "prefix-list" and "protocols". But, no "port-map" entry.
    We are running Version 12.3(14)T1 of IOS.
    TIA

    Yes. We can execute "show ip route" and other commands.
    We are working on building some ip port-maps. We issued one ip port-map command. That's when we went back to see what was in the port-map table by executing the "show ip port-map" command.

  • A june 2012 icloud backup shows up on my icloud storage manage list, but does not show up when i try to restore from icloud backup. what to do?

    Question repeated: A june 2012 icloud backup shows up on my icloud storage manage list, but does not show up when i try to restore from icloud backup. what to do?
    I want to restore from my june 2012 backup because it contains pictures that i lost when my phone broke in september. if anyone could help that would be awesome. thanks

    Did you tap "Show older backups" on the Choose Backup screen (see image below)?

  • Training and event management: Book Attendee List for Business Event List

    Dear all,
        I know this:
        PV07: book attendee list for business event
        PV08: book attendee for business event list
       Is there a tcode to book an attendee list for a business event list
    Thanks a lot in advance!

    Hi Federico,
    I think.., no. Below are the tcodes available to book attendee,
    PV00 Book attendee for business event
    PV01 Rebook attendee for business event
    PV02 Prebook
    PV03 Replace
    PV04 Cancel
    PV07 Book attendee for list  for Business event
    PV08 Book attendee for business event list.
    Let me know if you found tcode for your requirement.
    Thanks,
    Karunakar

  • Because I use parts numbers. How do I get my listing and ads to show up in google?

    EBay's management had a fight with Google some time ago.They lost. Basically all you can do is list with as many words in your title as possible (you have 80 free keystrokes). Don't use unsearched words like L@@K , or punctuation !?, and be careful of spelling. You have a 'bump' in eBay's  Search, according to legend, during your first weeks of selling, so get as much up as you are allowed. The more items you have listed, the more likely you are to be found. List in US dollars. This means using the ADVANCED or long form of the Sell Your Item form. There are other advantages to it. If you are an actual B&M shop, or if you have been in business for a while online or off, mention this in your listings. And put your eBay address on any websites that list that business, like Yelp or Canada411. 

    PC, I also rebooted the wireless.

  • List Of Business Partner

    Hi friends,
            I created a new for replacing List of business partners form.I need to display the newly created form when i press tab key from customer textbox of A/R Invoice form.For that my code is
       if (pVal.ItemUID == "4") & (pVal.EventType == PbouiCOM.BoEventTypes.et_KEY_DOWN) &  (pVal.Before_Action == true  & pVal.CharPressed == 9)
                                    BubbleEvent = false;
                                    string xmlFile = "";
                                    xmlFile = "ListOfBusinessPartners.srf";
                                    oCommonmethods.LoadFromXML(ref xmlFile, SBO_Application);
    The problem is when i pressed the tab key both the forms are coming ...Please suggest solution for this problem.
    Nisha

    Hello Nisha,
    Are you going to filter some customer in A/R invoice when type tab in cardcode. Actually you cann't change the system choosefromlist, but you can set the condition for it, It is unnecessary to create a new BP list form for it.
    try the following code:
    If pVal.FormType = 139 And pVal.EventType = SAPbouiCOM.BoEventTypes.et_CHOOSE_FROM_LIST Then
                If pVal.ItemUID = "4" Then
                    If pVal.InnerEvent And pVal.Before_Action Then
                        BubbleEvent = False
                        Dim oForm As SAPbouiCOM.Form
                        oForm = SBO_Application.Forms.Item(FormUID)
                        Dim oCons As SAPbouiCOM.Conditions                   
                        Dim oCFL As SAPbouiCOM.ChooseFromList
                        'oCFL = oCFLs.Add(oCFLCreationParams)
                        oCFL = oForm.ChooseFromLists.Item("2")
                        oCons = oCFL.GetConditions()
                        'Note: Add the condition only once.
                        If 0 = oCons.Count Then
                            Dim oCon As SAPbouiCOM.Condition
                            oCon = oCons.Add()
                            oCon.Alias = "Cardcode"
                            oCon.Operation = SAPbouiCOM.BoConditionOperation.co_EQUAL
                            oCon.CondVal = "C0001"
                            'Set your own condition here instead of the system conditions
                            oCFL.SetConditions(oCons)
                        End If
                        BubbleEvent = True
                    End If
                End If
            End If
    Or it doesn't meet your requirement, you would like to block the CFL of B1, you may set BubbleEvent = fale in Before Action for ChooseFromList Event. But this is the last option.
    Kind Regards
    -Yatsea
    Edited by: Yatsea Li on Oct 10, 2008 4:54 PM

  • Prevent users from printing the List of Business Partner window

    Hi All
    I have had this request and not sure if it possible.
    He wants to prevent the users from printing the List of business partner.
    That is when you do a search on the marketing documents.
    when do a search it brings up the window, List of Business Partners.
    they can go to file print...choose table and print the list of BP.
    is there anyway to prevent that?
    Thank you
    Jerusha

    is it a smartform
    You have to disable from ADOBE end
    sfpoutputparams-NOPRINT = X
    when calling the function module FP_JOB_OPEN.
    Unfortunately the PDF converter, which converts the output
    of a Smartform, does not allow to disable the print button.
    Please see note 841850 about this. Only the PDF-based forms
    support this features (class CL_FP_PDF_OBJECT also belongs
    to the PDF-based forms).

  • Service interface not listed in business system in ID.

    Hi Experts,
    In my QA system service interfaces are not listed in business system in ID, i have added product and SWCV in SLD and i am still unable to see the service interfaces of SWCV that i have added. i have done SLD and CPA cache refresh, restarted the QA system but still unable to resolve the issue.
    Please suggest how to resolve this issue.

    Hi Venu,
    i have done SLD and CPA cache refresh, restarted the QA system but still unable to resolve the issue.
    Try if "Compare from SLD" works? This can be accessed by going to ID -> double-click business system -> communication component -> adapter specific identifiers
    Regards,
    Mark

  • In J1IFR-List subcontracting challans, system showing Zero Quantity pending although Qty is pending

    In J1IFR-List subcontracting challans, system showing Zero Quantity pending although Qty is pending at MASOP vendor. After reconciliation of challan, the Qty sent=250 , Qty received= 113. system must show Qty pending = 137. But when we check in J1IF12, Qty sent=250 and Qty received=113. Why J1IFR report is showing incorrect output.
    I am facing this problem after Ehp7 upgrade in SAP ECC 6.0 version.
    Thanks & Regards,
    Neeraj.

    Are you using the same number ranges for different series group. This can cause inconsistency. Also check table J_1IGRXSUB whether right material documents are attached to your Challan.
    Also refer to these notes which is only applicable for EHP6.
    1753000 - Wrong output displayed for status in report selection-
    J1IFR
    and
    1674607 - Duplicate entries while displaying Annexure IV in
    J1IFR
    Regards
    Binoy

  • List of business objects

    Hi all,
    Is it possible in the DI API to get a list of business objects (for example business partners) from the Company object or do I have to use a recordset with an SQL statement? If so, how. And if not, where do I find a translation of tablenames (e.g.: AACP, INV6 etc.) to business objects.
    This seems a pretty generic question, but I cannot seem to find the answer. Does anyone have a pointer to good reading on the DI API subject?
    Thanks!
    Best regards.
    Chris G.

    Hi Chris,
    this is an excerpt from the SDK Help file.
    It works on other object too, of course.
    Private Sub DataBrowserOperations()
        '// A Data Browser object can not be created, it is invoked
        '// as a property of a business object.
        '// The BusinessPartners object is used to demonstrate the
        '// use of a DataBrowser object
        Dim BusinessPartners As SAPbobsCOM.BusinessPartners
        '// A DataBrowser object contains a Recordset object.
        '// Because a DataBrowser Object can not be created,
        '// a Recordset Object should be created and then assigned
        '// (linked) to the Recordset Property of the DataBrowser
        Dim oRecordSet As SAPbobsCOM.Recordset
        '// Get a new BusinessPartners object
        Set BusinessPartners = oCompany.GetBusinessObject(oBusinessPartners)
        '// Get a new Recordset object
        Set oRecordSet = oCompany.GetBusinessObject(BoRecordset)
        '// Perform the SELECT statement.
        '// The query result will be loaded
        '// into the Recordset object
        oRecordSet.DoQuery ("Select cardcode from ocrd where cardtype = 'C'")
        '// Asign (link) the Recordset object
        '// to the Browser.Recordset property
        BusinessPartners.Browser.Recordset = oRecordSet
        '// Access the data
        '// Once the Browser points to a row in the
        '// result set you can use the properties directly
        BusinessPartners.CardCode
        BusinessPartners.CardName
        '//Get the next Business Partner
        If BusinessPartners.Browser.EOF = False Then
            BusinessPartners.Browser.MoveNext
        End If
        '//Get the previous Business Partner
        If BusinessPartners.Browser.BoF = False Then
            BusinessPartners.Browser.MovePrevious
        End If
    End Sub

  • Wrong Bill-to-Country in  "List of Business Partners"

    Dear Experts,
    I am facing a strange problem. In the  "List of Business Partners" which pops when we search from the form of Business Partner there are the fields of Bill-to-Country and Ship-to-Country. There are Bps that there is no Bill-to-Country set in their card and in the list Bill-to-Country field is either "Cyprus" or blank. There is also on BP that  Bill-to-Country in the list is Germany, but in its card it is not set  Bill-to-Country. For the previous BP their nowhere in its history set Germany as an address.
    Regards.

    This indeed is a bug!
    If the state table (OCST) contains the following: example
    Code /Name /Country
    CA / California / US
    CA/ Cairo/EG
    Then  SAP uses a syntax that brings the first record for CA and that would be Cairo (Alphabetical Sort).
    I have this happening on a dozen cases.
    It's not harmful except when "Lists" are brought up.
    It does not seem to impact anything else. Data is still correct.
    At least this is the case in my SAP B1 8.8 (8.80.235) PL 17
    Upgraded from 2007A 09/2011.
    A little patch from SAP would go a long way in Customer Service on this issue.

  • Lean warehouse - List of Business Process

    Dear Experts,
    Can you please tell us what are the List of Business Processes applicable with respect to Lean warehouse management.
    Thanks and Regards,
    Selvakumar. M

    Hi,
    Movement of stock or stock change takes place at storage location level in Lean warehouse. in lean ware house thestock place ment and removal takes place only till storage location level wheres as  in fully blown ware house  the stock place ment and removal takes place till bin level. Hence lean warehouse is like the inventory management. You can have all the scenarios as in inventory management. Thanking you.

Maybe you are looking for