Listing an article on previous dates
Hi,
Is there a way I can list an article in a site on previous dates? (I tried using WSP4 and there was an error saying"Listing can be done only on dates >=Current date"). I need to do this to send sample consumption values to the F n R system and generate a forecast.
Thank You,
Best wishes,
Manoj.
Hi Manoj,
you find the excel upload tool together with documentation in the info button (as well as other helpful tools) searching via /FRE/TOOLS in F&R. However, these are ment for testing only!!! Moreover, in order to produce a forecast in F&R, there are many things to be considered. I would highly recommend to attend the two F&R workshops W26FRF and W26FRT. See service.sap.com/retail for further information.
Best regards
Barbara
Edited by: Barbara Wessela on Oct 9, 2009 2:57 PM
Edited by: Barbara Wessela on Oct 9, 2009 2:59 PM
Similar Messages
-
I have a question. Here in this factory we are running MD07 to check the exception messages, we typically see a lot of u201CPostpone processu201D messages because the planned order is firmed inside Planning Time Fence but thereu2019s no requirement.
We want to find out what are those requirements that used to be there and now they are not.
So Iu2019d like to know, is there a transaction where I can see MRP Lists (from MD05) from previous dates?
If there is, then I can see at a material numberu2019s MRP list from today, compare it with the one from yesterday, and so on.Fernando,
So Iu2019d like to know, is there a transaction where I can see MRP Lists (from MD05) from previous dates?
No. SAP only stores the most recent MRP list.
Some companies print the MRP lists to a spoolfile immediately upon the conclusion of the MRP run. MDLD. The spoolfiles can be configured to be retained for any period you wish, talk to your Basis team.
To review the contents of a spoolfile, SP01. It is not a database per se, but an image of the printed report. For your purpose, it would probably suffice.
Beyond this solution, you will have to create some customized functionality.
Best Regards,
DB49 -
Ok. Add me to the moron list. I guess I am an over zealous trash emptier. Can I retrieve those images by entering my time machine and restoring the Iphoto library from a previous date (when I wasn't a moron?)
Masters is where you want to be. They'll be in there in folders based on the date and time they were imported.
Regards
TD -
Hi All,
My program displays an idoc list(screen 100). Then if user selects any row in the method
gets the index no and details of that idoc are displayed in another screen(screen 200) .
Then control returns to this screen again. Now if user selects any row from idoc list (screen 100) then data is displayed along with data from previous screen .
In PBO of screen 200 : some code is :
create object go_docking
exporting
dynnr = '200'
extension = 65
side = cl_gui_docking_container=>dock_at_top.
create object go_grid_detail
exporting
i_parent = go_docking.
some code
create object go_custom_cont
exporting
container_name = 'DISPLAY_IDOC_CONTENT_200'.
create object go_grid_detail
exporting
i_parent = go_custom_cont.
some more code
call method go_grid_detail->set_table_for_first_display
exporting
is_layout = gs_layout
it_toolbar_excluding = lt_exclude
changing
it_fieldcatalog = fieldcatalog1
create object go_docking
exporting
dynnr = '200'
extension = 65
side = cl_gui_docking_container=>dock_at_bottom.
create object go_grid_detail
exporting
i_parent = go_docking.
In PAI of 200 screen i have used :
some code
free go_grid_detail.
free go_custom_cont.
go_docking->free( ). free go_docking.
After freeing all data and on call of screen 200 from screen 100 still it shows data from which was there previously on screen 200.
How can clear all previous data . Even i have free the docking still not working .
Kindly please help.Hi,
if go_grid_detail is type ref to cl_gui_alv_grid, call go_grid_detail->free( ) before container->free( ).
Regards,
Clemens -
How to get Item-Code wise stock quantity and value for a previous date
Dear Sir,
As per the government legal requirement , we are required to furnish a list for items having stock as on a date ( date is not the current date but it is some past date) and in the list we need to provide material wise stock quantity and value .
We can generate a list for the current date , but do not know how to get it for a previous date .
We request you to kindly guide us about such a list .
With Thanks and Regards
Sonia Agarwalhi,
might be this reports will be help full for your requirement.
MMBE
MB53
MB52
MB5M
MB5B
MB5T
MBLB
MBBS
MB54
ME56
Thanking you -
i shifted from a windows to a mac.. I want to add songs to my ipod tpuch 4th gen.. but if i try to sync with itunes it says my songs will be replaced by the new songs.. Is there any way that i can have my previous data safe??
Your iPod can only be synced with one computer at a time. If you try to sync it with a new computer/iTunes library, it will replace the contents of the iPod with whatever is in the new library. You should probably disable the autosync functionality first by going to Edit -> Preferences, clicking the Devices tab, and enabling the prevent iPods,iPhones, and iPads from automatically syncing option.
Before doing anything else, authorize the new computer with your iTunes Account. In iTunes, choose Store -> Authorize This Computer and enter in the correct credentials. Either copy a backup file from your old computer to your new one or create a new backup of your iPod in iTunes before letting it sync.
Then right->click on your iPod Touch from under the Devices section in the left hand pane of iTunes and choose Backup. You might also want to take a look at this article to see what it all included in the backup.
iOS: How to back up
Now onto synced content such as music, videos, photos, etc. For iTunes purchases you can copy them back into iTunes by choosing File -> Transfer Purchases. For all other nonpurchased iTunes content, see this excellent user tip from another forum member turingtest2 outlining the different methods and software available to help you copy content from your iPod back to your PC and into iTunes.
Recovering your iTunes library from your iPod or iOS device
Once the backup has been made and all other synced content such as music, videos, and photos are back in your iTunes library, restore your iPod from that backup you made earlier. Here is more on backing up and restoring your iPod.
iTunes: Backing up, updating, and restoring iOS software
If you do happen to lose any purchased content, you can always redownload it from the iTunes Store again at no cost via iCloud. See this article for information.
Downloading past purchases from the App Store, iBookstore, and iTunes Store
B-rock -
How update my list of articles?
Hi,
I have an excel file with the follow structure (for example):
RecordKey LineNum Quantity ItemCode
List1 1 5 code1
List1 2 2 code2
List1 3 3 code3
Where RecordKey is the name of my list of articles.
Using DTW (Data transfer workbench) for import my file, what is the table to be selected to update my list with the correct quantity? I don't find the correct table....
Thanks!
Regards.Here's an example of a DTW Worksheets for Item Price Update, Two Sheets, the First is the Items, the second sheet relates to the first sheet via the record keys.
Sheet # 1
RecordKey ItemCode
RecordKeypianpianint ItemCodepianpianstring
1 AS022300
2 AS022350
3 A6001000
4 AS014332
5 A6038100
Sheet # 2
RecordKey LineNum Currency Price
RecordKeypianpianint LineNumpianpianint Currencypianpianstring Pricepianpiandouble
1 0 USD 602.36
2 0 USD 629.79
3 0 USD 938.69
4 0 USD 570.45
5 0 USD 76.71 -
Sharepoint List to Telerik Grid, Where data is not coming from database into List.
SharePoint List to Telerik Grid, Where data is not coming from database into List.
Here, i have a SharePoint list , where configurable text are stored, using some utility.
I want to convert that SharePoint list into Telerik grid, with all Editable Option which i have in SharePoint.I know little about Telerik Grid, only find following article about Telerik integrate with SharePoint:
http://www.telerik.com/help/aspnet-ajax/moss-spradlistview_designer_general.html
a similar question:
http://www.telerik.com/forums/how-to-bind-to-a-sharepoint-list-using-radgrid
Thanks,
Qiao Wei -
Liste d'articles automatique dans une colonne.
Bonjour,
Je tente en français à la lecture d'Yvan KOENIG.
J'utilise des listes d'articles (en colonne) comme celle-ci: DUNJKR08001
DUNJKR08002
DUNJKR08003
KMTEND09001
KMTEND09002
Venant de passer d'Excel à Number, comment faire pour obtenir une numérotation de ces colonnes automatique? à la fois en suite (...09002-3-4 etc... et en insertion de ligne ...08004-5-6 etc...) ???
Ce qui se faisait en tirant les colonnes sous Excel.
Ne trouvant la solution, je vous remercie pour votre aide.
Cordialement
Morael - FranceI must apologize to English users but as the question is written in French, I respond in French
Bonjour
Désolé, la fonction que vous décrivez n'est pas disponible dans Numbers.
Elle n'existe que pour des valeurs du type nombre ou date.
Dans votre cas il faut utiliser une formule.
Dans la colonne A mettons 8001 en A2 et 8002 en A3.
Sélectionner A2 et A3 puis glisser la poignée circulaire visible en bas à droite vers le bas génère une série croissante de nombres
Insérer en B2 la formule ="TRIC" & DROITE("0"&A;5)
puis utiliser le protocole remplir vers le bas va vous donner le résultat espéré.
Autre solution sans colonne auxiliaire:
en A2 insérez
="TRIC" & DROITE("0"&(7999+LIGNE());5)
et reproduisez vers le bas.
Les formules me semblent suffisamment claires pour être adaptées à l'autre cas.
Si on veut incrémenter en fonction de la colonne, si l'on part de la colonne B, il faut utiliser:
="TRAC" & DROITE("0"&(8999+colonne());5)
Bien entendu je vous suggère le "traditionnel:
_Go to "Provide Numbers Feedback" in the "Numbers" menu_, describe what you wish.
Then, cross your fingers, and wait _at least_ for iWork'09
Yvan KOENIG (from FRANCE mercredi 11 juin 2008 14:40:27) -
Reusing datagrid, removing previous data & repopulating
I have a datagrid in a flash app. The intial use works fine. The flash has the ability to recalculate the needed data which I then use to repopulate the existing datagrid. What is the best way to clear out a datagrid and repopulate it?
I tried:
ifxGrid.dataProvider.removeAll();
but it does not clear out the previous data.
i also tried:
ifxGrid.removeAllColumns();
this worked a little but not entirely.
So what's currently happening is that the new data is appended to the old data. So if I had 50 rows in the 1st calculation and then I have 70 rows in the 2nd calculation I end up with 120 rows of data in my datagrid.
I've googled datagrids & looked thru the forums and it seems like there's a lack of documentation or examples on how to reuse & repopulate a datagrid.
Thanks in advance for your answer,
Zak"removeAll() isn't in the documentation link that you provided"
Yes, it is:
http://livedocs.adobe.com/flash/9.0/ActionScriptLangRefV3/fl/controls/SelectableList.html# removeAll()
It is a method of SelectableList class that DataGrid extends and it is listed in DataGrid documentation as such. -
I have huge lag with Safari's Reading List using a rMBP. I have probably 80 articles saved, which is likely the cause of the lag. Is there any way to export that list of articles so as to be able to delete them from Reading List but still have a record of the articles I intend to read?
I'm currently dealing with this issue myself, except that my rMBP has NO articles in the reading list. It's a brand new rMBP too, purchased just this week, with the 2.6 Ghz Processor & 16GB of RAM.
Let's see what we can find. I may just take it back to the Apple Store. -
Opening stock will be the closing stock of previous date
Hi All,
Good day. I am developing an ALV report that will show opening stock(LABST) as well as closing stock(Calculated) for a range of date and materials. Problem here is that from MARD table I am getting only the last opening stock, because it has no common date field with MSEG table. So, I have to calculate the opening stock as the closing stock of previous date. How can I calculate this? Is there any FM to get the opening stock ?
Date Material Opening St Closing St
27.03.2009 2100002 91.000 191.00
28.03.2009 2100002 191.000 123.00
29.03.2009 2100002 123.000 103.00
With regards,
Tripod.
Edited by: Tripod on Aug 23, 2011 12:13 PMTry not only to use MARD and MKPF/MSEG but also MARDH which contains closing stock of period preceding periods where movements happened. (ie. there is a record for May if a movement happened in June, and none for June if there was no movement in July, and no record exists for August as this is current period) - First look for MARD, MARDH records; and then only read MKPF/MSEG from last MARDH record found. (created back to 4.5A - [Material Master (Industry/Retail): Enhancements to Period Closing|http://help.sap.com/saphelp_45b/helpdata/en/35/b0e7ef87a62488e10000009b38f9b7/content.htm])
Regards,
Raymond -
How can I keep all the previous datas in the same array?
I have a problem with keeping the previous datas in my array. The problem is when the iteration loop is executed, I have one or two value(s) stored in the array. The second iteration I have either one or two values (depending on the condition) coming out, but it overwrites my previous value. I want to keep all my data in the same array as the loop is executed.PS. I have attached a simple vi along this message. If anyone can help me out with this, I really appreciate for the help.
Regards,
SonnyIf you iterate several times (N > 100) then I would suggest using the Initialize Array outside of the For Loop and then use the Replace Array Subset inside the Loop to populate the array. The reason for this is because the Build Array utility has to locate a new space in memory for the newly concatenated array -- the Replace Array Element utility uses the same memory space.
If you iterate just a few times with a small array then using the Build Array should be okay.
Chris_Mitchell
Product Development Engineer
Certified LabVIEW Architect -
I went yesterday to the Albany, NY apple store genius bar with a sound issue on the Ipad. After 2 hours the "genius" told me that
they tried wiping my Ipad clean, but not to worry that first everything was saved in the cloud. I was told I had to reload all
purchased Apps and would be no charge and would take some time. Due to the late hour I said I'd do it at home. I did not do
it last night. This morning I open the Ipad to find nothing in it....no contacts, no notes....nothing. I rushed back to the apple
store and was told that apparently last night a backup took place and the Icloud backed up a clean Ipad....no info. This is a
huge problem. Apple personel simply said sorry that the "genius" should have known better. Attempts to restore seems to
only go back to the last backup which of course is blank. Now my question is .....is it possible somehow with the cloud from a
previous date like you can with a PC?You can order recovery media here
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00810334&cc=us&lc=en&dlc=en -
List Builder only shows 1 data set at a time
Am attempting to get a list builder to display multiple data sets but am hitting a wall. When a 1st data set is selected then all OK. Add 2nd data set and update list and only 1st is shown. Remove 1st and update and data is refreshed to 2nd list. Add 3rd and repeats itself and so on. Looks like all OK based on the sample but built from scratch and think missing something simple in the destination range (although appears fine). thoughts?
Can you describe this in more detail?
How are your datasets defined in your excel model and how are your target cells formatted?
How are you trying to display the two resultsets in list builder in the first place? The cell range has to be contiguous for list builder to work.
Maybe you are looking for
-
Number range mapping to alphanumeric numbers.
Gurus, I want some help in writing some logic in ABAP. I have a scenario when a the numbers that are coming via interface are greater then 99. In that case, I have to map according to following scenario: Ex: If its 100, it should be converted to A1 a
-
Printing with print report.vi
I am using windows 2000, LabVIEW run time engine and am having problems with printing. When one users logs onto windows, runs the program he is able to print the results. However if someone else logs onto windows they are unable to print. I am just u
-
I want to edit some scanned newspaper prints to include only the columns in which I am interested. Is there any way to crop the scanned photo in an irregular manner so as to include only the relevant section?
-
Why was my media deleted from my phone when it said no data or media will be delted
-
Can't sync since last iTunes and IOS update
I have an IPAD 4 and a MAC Mini Mid 2011. I upgraded to IOS8 and ITunes 11.4 almost at the same time. It used to sync without problem, but since the upgrade it says " It's not possible to sync the IPAD XXX because these computer doesn't have authoriz