Listing Current unverified objects in a single content area

Hi All,
Has anybody written a portlet to give a list if all objects that need to be verified by a single user?
If not, could someone please point me to the table/api to get such information
Regards
Paul

HI moni,
Yes we can, we can concat the state object for every country one case.
If you need to display this constarint for each and every case of your objects, just create the condition objects as a derived table in teh universe using LISTAGG() function.
Regards,
Madhavi

Similar Messages

Single content repository for multiple archiving objects?

We have three archiving objects that the business has basically set the same retention period for all of them (April 1: archive previous year (current-1), delete archived data from the year before (current-2)). Rather than have three separate repositories, would it be a good practice to place these three (and any other that meet the criteria) into the same repository making the management of these simpler (deleting from IXOS)?
Thank you,
Skip howell
Limited Brands

Hi,
COntent repository can be single or multiple. It depends on the clients requirements.
How ever you can recommend to your client based on the following best practices :\
(1) COntent repositories can be created and allocated based on the archive object.This will help the client to maintain the archive files and also use them at a later stage for retrieval/audit or any other purpose.
(2) Content repositories can also be created and allocated based on the retention time .
(3) Single content rep for multiple objects is technically possible but this is not a good approach.If this is done, then utmost care needs to be taken during the Archive file naming convention ( while archiving the data for a particular object) . Such a naming convention would reduce the hassels of getting the archived files mixing up. this will also help you to better manage the archive files of different objects in a single content rep.
DIfferent clients may use any of the approact based on their records management strategy.
Hope this information helps.

Moving a folder, Linking between content areas

I have 2 problems:
1) So far we developed all our content in a single content area. We would now like to split the information into multiple content areas. The MOVE or COPY command on the folder only allows me to copy within a content area. I have hundreds of documents to move. Is there any way i can move a folder to a different content area?
2) What is the best way to link a folder from 1 content area to a folder in another content area? I found that the FOLDER LINK ITEM allows me to connect only within a content area.
(I would prefer not to use an URL since the content publishers may not be able to construct complicated paths or the paths may change leading to broken links.)

Suraj
1) The only way to do this currently is to create an export of the content area, import it back into the portal and remove the duplicate content. We are planning a bulk action feature in a future release that would allow you do to selectively copy/move one or more folders into a new content area.
2) Currently folder links are scoped within a content area; the only option is to link to the folder through a URL folder type. If you use the generated URL that contains the folder ID, you shouldn't run into any problems if the target folder is moved. I have submitted an enhancement request to extend the folder link to 'remote' folders outside of the 'home' content area.

Advice on content area layout & subfolders

Hi all!
We're just starting to use content areas for real document management, and I was hoping someone could offer some advice on the layout of one or more of these content areas.
I'm trying to build a typical corporate "Document Library". Parts of the library will be available to "Public" corporate users (corporate users who have not logged on to the app yet), other parts will be available to all authenticated users, and other parts will be available to only certain groups. (Relatively easy so far...)
So far I have these all in a single content area called DOCLIB, with two folders: PUBLIC and CORPORATE. (Ultimately there will be a third high-level group for FRANCHISE users -- non-corporate stores.) PUBLIC is accessible to public users; DOCLIB itself and DOCLIB/CORPORATE are accessible to AUTHENTICATED_USERS. PUBLIC contains subfolders such as NEWS, HELP, FAQS, HRDOCS ("public" HR docs), PRESS_RELEASES, etc. CORPORATE contains subfolders such as NEWS, PLANNERS, IT_DOCS, HRDOCS ("logged on only" HR docs), etc.
A few questions:
1. Does it make sense to break out the PUBLIC and CORPORATE folders at the very top level, or are do people generally put the private folders as subfolders of the corresponding public ones? (Ideally I'd rather put these both into the same folder and simply show more documents once the user logs on, but I couldn't get this working properly.)
2. I currently have the "DocLib" content area showing on the main portal page, defaulting to the PUBLIC folder. However, once the users log in, I'd like to switch the focus to the root DOCLIB folder instead of the PUBLIC subfolder. As it runs now, the focus remains on the PUBLIC folder, and the user must click on the folder path to move to the root folder. Is there any way around this short of creating two different tabs, one for public users and the other for logged-on users? (Once they log on now I show an additional 3-6 tabs on that page.)
3. I'd like to show certain folders (such as "News/System News" and "News/Company News" in their own portlets (in addition to inside the overall Document Library portlet). Unfortunately, once the user logs in, the folder path is displayed, and the user can navigate to parent folders while inside this portlet. (This will horribly confuse some of our users...) I know I can turn off the folder path for this folder, but then it is also gone when this folder is displayed inside the overall "Document Library" portlet (where I'd like to still show the folder path). Is there any way around this?
4. Is there any straightforward way to display the same document in more than one folder? If I use perspectives, it looks like I then give up control over how the page gets formatted, if I use a Folder Link, the folder opens up in its own page instead of inside the portal area, and if I use a URL to point the "second" copy back to the first, this will be difficult for later content managers to maintain. Am I missing another easy way to do this?
I know how to do all this via the PDK, but we're trying to use as much of the built-in content-management tools as possible instead of building more PDK-based code.
btw: We are still in Portal 3.0.8, although we're moving to 3.0.9 as soon as possible.
Sorry for the length of the post, but any insight anyone could offer would be greatly appreciated!
- Bill

Hi All
We are using release 2, and we are looking into using a page template containing a JSP portlet for a consistent navigation bar/header. What do you think of this approach?
Regards
Harry
Jon,
There are a variety of ways to do this:
One way is to modify the page that the content area is on to contain the portlets that you would like on your page. Those portlets would contain your banners, links, logos, etc. Note that the page under a content area can not contain tabs.
Another way to do this is to create separate pages and link to those pages from your navigation bar manually.
Note that in release 2 of Oracle9iAS Portal we have combined the content area and page concepts so that there is no more 'drill out of the portal page' loss of context, so you could use Oracle9i Application Release 2 also.
Rich

How to create a default Style for several Content Areas

Hello,
I have not been able to figure out how to create default styles/nav bars/etc... that can be used between SEVERAL Content Areas, and/or for any new Content Area. It seems to me that what is created in one Content Area, is not available for use in any other Content Area.
Being that I'd like to keep the Administrative overhead as low as possible, I wonder if anyone has and/or knows how to create a default style, etc.. and use it with each Content Area across an Enterprise site???
Many thanks for any information you may have!!
null

Kahli,
check out the Shared Objects node in the Content Area navigator.
Good luck, Tony

Per site, list driven footer and other content areas on a SharePoint 2010 master page?

So I worked with a vendor to provide a js, a powershell script and <div> content holders in a master page that would pull the content dynamically based on the site or subsite, and more specifically from a custom list in that site. To explain, if I
have a root site collection but want to be able to have the end user control the site content, such as a custom top navigation (above the global) and custom footer, and custom place holder content that would appear under the navigation; I would like to have
that content pulled from a list.
My goal is to not have a "custom master page" for the many many sites we have in our environment. I am using twitter bootstrap as the foundation for the master pages, then a set number of page layouts pending whether they want left nav to show
or not. I also typically just use the v4.master for the system pages, but am not sure if that is a best practice either being that the list display forms for a publishing site are ugly so need customized per list.
Has any one done anything like this and if so could you point me in the right direction? Any guidance would be greatly appreciated. Right now am working within SP2010 but will be testing for SP2013 in the near future.

Hi,
Based on my understanding, you might want to display dynamic content in the pages which reference a specific master page, the content stores in a custom list, users
can update the master page by updating the corresponding list items.
Then there would be two main steps in a solution like this:
1. Data retrieving of a list: JavaScript Client Object Model can help to query the needed items from a list;
JavaScript Client Object Model
http://msdn.microsoft.com/en-us/library/office/hh185006(v=office.14).aspx
More information about JavaScript Client Object Model:
How to: Create, Update, and Delete List Items Using JavaScript
http://msdn.microsoft.com/en-us/library/office/hh185011(v=office.14).aspx
2. Modify the master page: With the data retrieved, we can then change the HTML source code of a page using JavaScript.
About how to
modify the HTML using JavaScript:
http://www.w3schools.com/js/js_htmldom_html.asp
http://njarb.com/2011/06/update-html-content-using-javascript/
We can apply the custom JavaScript to the master page, then when users open a page which references this master page, the JavaScript will run, get data from the custom
list, change the HTML source of the current page and display the content you want.
Best regards,
Patrick
Patrick Liang
TechNet Community Support

I'm trying to create a Windows partition using Boot Camp. An error comes up telling me that I need to reformat my current partition(s) into one single partition. However, it's already formatted in the correct format, and is already a single partition.

As made clear in the title:
I'm trying to create a Windows partition using Boot Camp. An error comes up telling me that I need to reformat my current partition(s) into one single partition. However, it's already formatted in the correct format, and is already a single partition.
My computer recently had a kernel panic, which apparently the corruption was in the system and needed to be erased and re-installed. I have a complete back-up using an external hard drive, and I am definitely not willing to do another one of those to reformat a partition that is already singular. I restarted the computer after ejecting my back-up, and after turning off time machine (thinking that boot camp was recognizing it as a secondary partition), however the error still occurs.
Is there any way to get around this?

diskutil list:
/dev/disk0
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *750.2 GB   disk0
   1:                        EFI                         209.7 MB   disk0s1
   2:                  Apple_HFS Macintosh HD            749.3 GB   disk0s2
   3:                 Apple_Boot Recovery HD             650.0 MB   disk0s3
/dev/disk1
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:                            Windows7               *2.9 GB     disk1
diskutil cs list:
No CoreStorage logical volume groups found
mount:
/dev/disk0s2 on / (hfs, local, journaled)
devfs on /dev (devfs, local, nobrowse)
map -hosts on /net (autofs, nosuid, automounted, nobrowse)
map auto_home on /home (autofs, automounted, nobrowse)
/dev/disk1 on /Volumes/Windows7 (udf, local, nodev, nosuid, read-only, noowners)
From my very basic knowledge - it still looks as if there is only one partition (not including the windows 7 CD necessary to install the windows partition).

Using a single Content server for DMS and also for Archive link documents

Hi,
We have Planned for a single content server for managing the documents in DMS, parallelly as DMS Standard SAP objects are not available for all SAP transactions, i have proposed for making use of SAP Archivelink funtionality to maintain the documentations where Std SAP DMS does not provide a Solution.
so here the question is
can a single content server be used as a content repository for Both DMS and archivelink,
can any one having done this pls state if it is possible to create different or Many Content repositories for DMS, Archive link in the same server,
is this a virtual creation or can we assign each repository a specific storage space which it should not exceed.
Thanks and regards
Sathish

Hi sathish,
-- Through the ArchiveLink docuemnt Management interface, an SAP sytem can use various content servers as storage media. similarly, one contnent server can be used by multiple SAP systems.
-- A Content server always has a single database assigned to it. A database can therefore be used by only one content server.
-- A databse is split into as many repositories as necessary. The design of the repository is mapped in the SAP system.A repository contains documents.
Depending on your requirements,(if u have limited documents or with low requirements) you can use the same content server for both DMS and Archivelink.
The number of documents stored on the content server is limited only by the size of the database.
Its better to have an external content server for archiving purpose, if your database size is increasing. Since the archiving systems storage is not dependent on the database.
U can also refer to the below thread :
How to Archive SAP DMS Data?
hope this helps....
regards
kavitha

Shouldn't object style with 'fit content to frame' work with updated images?

I have a script that places pdf files from a list onto pages. The rectangles are built with an object style that fits content to frame. This works, but if the pdf file is then modified, InDesign does not fit the new content to the frame when the link is updated. Is there a reason why the object style does not honor its settings?
Thanks.

I have a script that places pdf files from a list onto pages. The rectangles are built with an object style that fits content to frame. This works, but if the pdf file is then modified, InDesign does not fit the new content to the frame when the link is updated. Is there a reason why the object style does not honor its settings?
Thanks.

List with multiple objects

Hi,
Is it possible can we have a List with multiple Object (CustomerVO, OrderVO and AddressVO) in a single List? If so how we will define the generics for that List?
Please clarify.
Thanks.

797836 wrote:
Guys, am I correct? Please clarify.If it works, it is correct. So try it.
I was more thinking along the line of this though according to what you described in your initial post:
Class ParentVO{
private CustomerVO customer;
private OrderVO order;
private AddressVO address;
// with getters and setters
}That way you don't need any list at all, if you only want to have access to these three objects. Just slap them in a ParentVO and use that.
Looking at it again I wonder if the ParentVO is needed even, there is a strong relationship between these three objects. An order has a customer and a customer has an address / an order has a billing/shipping address...

Reader Hive query - Cannot deserialize the current JSON object

Hi all,
I am trying to run a Reader module in MLStudio with a Hive query but it fails with Error 0000: Internal error.
In the output log I see this error:
[ModuleOutput] DllModuleHost Error: 1 : Program::Main encountered fatal exception: Microsoft.Analytics.Exceptions.ErrorMapping+ModuleException: Error 0000: Internal error ---> System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> System.AggregateException: One or more errors occurred. ---> System.AggregateException: One or more errors occurred. ---> Newtonsoft.Json.JsonSerializationException: Cannot deserialize the current JSON object (e.g. {"name":"value"}) into type 'Newtonsoft.Json.Linq.JToken' because the type requires a JSON array (e.g. [1,2,3]) to deserialize correctly.
[ModuleOutput] To fix this error either change the JSON to a JSON array (e.g. [1,2,3]) or change the deserialized type so that it is a normal .NET type (e.g. not a primitive type like integer, not a collection type like an array or List<T>) that can be deserialized from a JSON object. JsonObjectAttribute can also be added to the type to force it to deserialize from a JSON object.
[ModuleOutput] Path 'FileStatus.length', line 3, position 14.
But I don't see any configuration to change any JSON settings.
What am I doing wrong? Can anyone help me?
Thanks,
Csaba
PS: Using the Hive Editor I can select from my table without any problems.

Can you let us know if you are still encountering this error? It doesn't look the error is due to user error.

Install Info Object 0BSTAT from business content

Hi Guys,
I am trying to install info object 0BSTAT from business content , i have selected the options
grouing "only necessary obects" "start automaticall" "Hierarchy" ad dragged info obect from left side into collected objects and selected the install and trasport option form Install, assigned the trasnport also, it didn't give any errpor message but info object is not getting activated.
An body had the expericence with this issue, please share you ideas how to fix the issue.
Thanks
Best regards
Shekar Gunda

Thanks for your reply Matrin.
I looked at the log
Log is:
Installation of: Onfo Object (IOBJ)
You onl have authroization to display info object 0BSTAT
Transfer/Merge of the content version (Object Type Infoobject)
Activation of obects with type Info Obect
Saving Objects with type Infoobject
Transferring the 1 objects from type IOBJ took 0.4 seconds
Post-Processing of objects after activation
The post-processing lasts 0.0 seconds
Object IOBJ 0BSTAT was written to order/task EWD*******
You onl have authroization to display info object 0BSTAT
I looked at the SU53 also there is one error message related to info object BSTAT
Currently aunthorization Field ACTVT Activit is "23"
Does this mean i don't have autorization to install of info obects, do wee need any special activity is required in the for installing info object
Please suggest me how to proceed.
Thanks
Best regards
SG

Folder Content Listed in Content Area

I understand that this is an issue that was fixed from a previous version, but I will give it a shot anyway.
I would like to direct the folder content to open in the "content" area NOT in the portlet when I select a folder, but apparently this was something that was fixed in 3.0.8. Does anyone know if there is a way to get it back the old way?

Hi Dharam,
This can be achieved by selecting the object types (eg Folders, Documents, Bookmarks, Notes etc) that you want to use in a collaboration.
If you are a cFolders administrator, you can define which object types are to be used across the entire system on the General tab page under cFolders Administration.
If you are not a cFolders administrator but have administration authorization for a collaboration, you can change this default setting for the relevant collaboration. To do this, proceed as follows:
Go to the collaboration detail screen and choose Object Types. A list of all object types appears. By default, the objects that have been selected under cFolders Administration are already selected. You can select the objects that have not been selected under cFolders Administration as required.
Change this selection if necessary. You can select exactly those object types that you want to be used in your collaboration. The system-wide default is not affected by this.
Regards
Deepak

Need help (desperately) '^_^ in writing multiple objects in a single file

For all those Java guru out there please help me,
I want to write a simple application that can serialize objects in a single file. Currently I know how to serialize one object in one file using the ObjectOutputStream's writeObject () method.But the problem is that if i have 10.000 objects to serialize then I will have 10.000 file in my HD. To simplify things I want to write those 10.000 objects in a single file. But I dont know how to do that, any one can help ??

You can write any number of objects of any type into a file when you serialize them. You need to realize that once they're written to the file, they're all placed in there as type Object, so there really isn't any distinction between any of them. You don't have a file that contains only Shapes, or only Images. You write them out as Objects, and then you discover their types later as your deserialize them and read them in. You should read into the "Reflection" capabilities that all objects have. You write an Image to a file, and then a Shape, and then a Color, you can later pack these all into an ArrayList as you read them in, and when you use them discover their type using reflection.
-Jason Thomas.

List of obsolete objects and tables

Hi,
Can anyone give the list of obsolete objects and tables from 4.6c to ECC 6.0 upgrade. Also other upgrade issues and solutions faced for ECC 6.0 upgrade.
Thanks in advance.

You may have an overview wirth Solution Browser tool (at the solution point of view) in order to compare functionality between your current system and the ERP 2005.
at:
http://solutionbrowser.erp.sap.fmpmedia.com/
You can get the detailed release information from the following link.
http://service.sap.com/releasenotes.
A release note is a brief explanation of new features or changes to the system since the last software release. A release note typically describes a new function or an existing function that has been enhanced or changed.
I hope this helps.
Reward Points If helpful
Regards
Nilesh

Listing Current unverified objects in a single content area

Similar Messages

Maybe you are looking for