Listing / Exclusion Error

Hi All,
I have configured listing/exclusion such that we can list or exclude by the key combinations customer/material, or customer/material group. Exclusion works for both key combinations, but listing only works for one of the two key combination groups at once.
For example, we have customer 100 and 200. For customer 100, I exclude material 10, and group B. When creating a sales order, when I try to add material 10, or B1, B2, B3 etc. from group B, I recieve an error. For customer 200, I list material 20, and group A. When I create a sales order, I can only add material 20. However, I can not add materials A1, A2, A3, etc. from group A.
I've tried rearranging the access sequence A001 for listing, and having it check groups before individual materials. When I do this, then it will allow customer 200 to purchase A1, A2, A3, but not material 20. So it seems that the A001 is only looking at the first table in the access sequence?
I've run stuck as to why this would be the case... any ideas?
Thanks,
J

Hi
Firstly , Just check wheather you have assigned Listing procedure and Exclusion procedure to your document type or not. Secondly also check wheather you have maintained both conditon records or not
Regards
Srinath

Similar Messages

  • Error After Config Listing/Exclusion

    Hi All,
    Regarding about this case. I found out after I created the routine and config the listing/exclusion when I want to create the Sales Order VA01. the error show up that "the material xxx is not listed and therefore not allowed".
    so which part of the user exits can I modify if I maintain VB01 for exclusion base of customer code, the program just running my routine requirement not running the error from SAP ("the material xxx is not listed and therefore not allowed"). thank you .
    Best Regards,
    Koho

    Hi
    Firstly , Just check wheather you have assigned Listing procedure and Exclusion procedure to your document type or not. Secondly also check wheather you have maintained both conditon records or not
    Regards
    Srinath

  • ROUTINE Listing/Exclusion

    Dear All Senior,
    Does anybody know how to create the routine number of the listing/exclusion in VOFM, what the value should be put in the routine number ? and have any document about this listing/exclution ? please give me that link. Thank You
    Best Regards,
    Koho

    Hi Pritam,
    Regarding about this case. I found out after I created the routine and config the listing/exclusion when I want to create the Sales Order VA01. the error show up that "the material xxx is not listed and therefore not allowed".
    so which part of the user exits can I modify if I maintain VB01 for exclusion base of customer code, the program just running my routine requirement not running the error from SAP ("the material xxx is not listed and therefore not allowed"). thank you .
    Best Regards,
    Koho

  • Listing/Exclusion Conditions are not getting downloaded from ECC to CRM

    hi,
    I have created the customized table for listing/exclusion purpose as per the requirement.
    I have created the middleware adapter for that object.(DNL_CUST_G804)
    I have down the initial download and when I check the status it is green color when I check the records in CRM Table I did not find it.
    When I check in the SLG1 the following error has been occurred
    "No Entries Determined for the A Tables (Block 1)"
    Message no. CND_MAP312
    Diagnosis
    No entries have been transferred from R/3 to CRM for one of the following reasons:
    1. The R/3 condition table does not contain any entries.
    2. The maintenance authorization has been transferred to CRM. This means that data in the R/3 condition table can no longer be downloaded from R/3.
    System Response
    Error message CND_MAP 312
    Procedure
    If this maintenance authorization has been transferred to CRM in error, this can be transferred back in exceptional circumstances so that a data download from R/3 is possible.
    Condition records have been maintained in ECC server.

    Hi
    i have the same problem , how did you solve it ?
    regards
    Jacopo

  • Background job cann't open the Spool list, the error as below.

    Hi, experts,
    My background job 'Z1RM0063' couldn't open the spool list, the error as below:
    ' The selected section of the spool request 20,004
    in SYSTME SID is empty.'
    Who could tell me this is why ?
    Thank you very much in advance,
    B.R
    Michael

    Hi Michael,
    Its very difficult to tell... seems to be a custom job, what program is running?.. Does the spool that the job is trying to read still exists?...
    Can you please post more details?
    Regards
    Juan

  • TS1424 everytime i try to download an app from itunes, or to 'view all' the apps listed, the error says; 'We could not complete your iTunes Store reuest. The network connection was reset' I used both my desktop and laptop both on Windows 7 Pro, & net is f

    everytime i try to download an app from itunes, or to 'view all' the apps listed, the error says; 'We could not complete your iTunes Store reuest. The network connection was reset' I used both my desktop and laptop both on Windows 7 Pro, & net is fine. please help. is there soemthing wrong with apple store temporarily?

    The latest message is: 'We could not complete your iTunes Store request. The network connection was reset.'
    In between, I got a messge about verifying my payment method. When I tried to submit the details, I kept getting a mmessage stating that my payment method was declined (my card is not near it's expiration date, and works fine).
    Argh!

  • How to find the List of Errors occured while Upgradation

    Hi All,
    I am working on Upgrade Project from 4.7C to ECC 6.0. I need to find out the list of all errors occured custom objects while doing Upgradation. I heard abt tool Uptimizer but our company is not using that tool, is there any other way to find out the list of errors.
    Can anyone please give me some suggestion how to proceed further tht would be great help.
    Regards
    Yathish

    Most of the development issues can be identified by SAMT and UCCHECK in the upgrade sandbox. There may be a small percentage of runtime issues not identified but they will be covered during the testing phase.
    -Cheers

  • IDOC for listing/exclusion conditions (transaction VB01)

    Hello,
    we need to export the conditions for listing or exclusion entered in transaction VB01 (tables KOTG900 ff)  to an external sales order system. Does the system provide an idoc for this purpose?
    best regards
    Rainer Fischer

    Check OSS  Note 863767 - FAQ: Listing/Exclusion. Per point 6,
        6. Question: Can the table contents of material listing and exclusion be distributed to other systems by means of IDocs?
                  No. In the SAP standard system, there is no IDoc distribution of conditions for the usage 'G' (listing/exclusion).
    Regards,

  • Transaction for Mass deletion of Listing/ Exclusions   ???

    Hi
    Is there a transaction i can use to mass delete Listings which exist ?
    I wish to delete them all from our development client only
    thanks
    Tony

    Hi
    KIndly create the LSMW as per the below source fields for t code VB02
    KSCHL                          C(004)    Material listing/exclusion type
    SELKZ_01                       C(001)    Selection indicator for list screens
    KUNNR                          C(010)    Customer number
    DATAB                          C(010)    Validity start date of the condition record
    DATBI                          C(010)    Validity end date of the condition record
    MATNR_01                       C(018)    Material Number
    REgards
    Damu

  • Hadbm list hadbm:Error 22012

    Hi all,
    When i try to list using the hadbm the following error prompts:
    hadbm list hadbm:Error 22012: The management agent at host localhost is not ready to execute the operation, since it is about to do repository recovery.
    Please make sure that a majority of the management agents in the domain are running, and retry the operation later.
    in the first ma.log:
    2007-03-11 08:46:42.587 INFO Thr{0010} MgtProperties.logProperties:
    Using property: ma.server.mainternal.interfaces=
    in the second ma.log:
    i can see the IP displayed even same configurations were done.
    Is this the problem? If so, how can i solve it?
    If not, how can i solve the above error?
    Thanks,
    Scotty

    Hi,
    Second issue:
    asadmin configure-ha-cluster --hosts host1,host2  --devicesize 56 hadbExecutes a couple of things:
    1) check if a application server cluster called hadb (your last argument) exists, this is probably not the case
    2) Create a HADB database with device size 56 called hadb , if not there already
    3) Create Datasource and connectionpool in AS configuration
    4) add reference from cluster to datasource and pool.
    So the way to go is, define a cluster first and afterwards, run this command to enable and configure HA for your appserver cluster.

  • List threshold error on SharePoint Documents webpart under Mysite Content tab

    Hi,
    Even though the list threshold limit has been increased for a team site to 40k in CA -> Web App -> Resource Throttling options when a user goes to his/her mysite and are member of a particular team site they get the following error message on the SharePoint
    Documents webpart:
    An error has occurred.
    The attempted operation is prohibited because it exceeds the list view threshold enforced by the administrator.
    The number of items in the document library for that particular team site are 14k where as the limit has been increased to 40k.
    Can anyone help why we are getting this error message? Thanks
    Regards,
    Kashif

    Hi,
    According to your post, my understanding is that you had List threshold error on SharePoint Documents webpart under Mysite Content tab.
    Items in the recycle bin count towards the limit, please make sure you did not delete items from this list recently and if you did, remove them from the recycle bin too.
    Please make sure you removed the 'Assigned to' criteria from the view.
    I also recommend to increase the threshold limit and see if that works, though it is not a good idea for the long term.
    The default value for this limit is based on farm and list performance and how SQL Server manages locks.
    Rather than bumping the List View Threshold or the List View Threshold for Auditors and Administrators, you should modify your query.  The best ways to do this are:
    Execute the query against a limited view rather than the default list view containing all items by specifying the view name in the new SPQuery object constructor.
    If you can’t execute your query against a limited view, create a column index for each column contained in the <Where> clause of your SPQuery.
    Here is a similar thread for you to take a look at:
    http://social.technet.microsoft.com/Forums/sharepoint/en-US/bb7cf9b5-1473-4ab8-be32-75a62a34dc10/the-attempted-operation-is-prohibited-because-it-exceeds-the-list-view-threshold-enforced?forum=sharepointadminprevious
    More information:
    http://thedotnetter.wordpress.com/2013/04/25/spquery-and-the-list-view-threshold/
    http://www.collabshow.com/2011/08/03/managing-large-lists-in-sharepoint-for-users-and-site-admins/
    Best Regards,
    Linda Li
    Linda Li
    TechNet Community Support

  • Why does Apple not give a list of error messages and possible solutions? I have the (-54) error continually that has suddenly appeared and cannot find a solution, even though other users seem to have the same problem.

    Why does Apple not give a list of error messages and possible solutions? I have the (-54) error continually that has suddenly appeared and cannot find a solution, even though other users seem to have the same problem.

    This is a user to user forum.  Apple isn't here and won't answer you.  You need to contact Apple directly.  You can use the Contact button at the bottom of the screen.

  • Description for list of errors in log file

    Hi,
    Is there anybody out there that would have a description for the list of errors we can get in crawl log file.
    For example I would like more info and how to fix these errors...
    WKG-30199
    WKG-30201
    WKG-30005
    WKG-30007
    WKG-30008
    WKG-30009
    WKG-30013
    WKG-30018
    WKG-30027
    WKG-30041
    WKG-30083
    WKG-30126
    If anybody can help me find a description of these errors that would be great. How to fix them event better.
    thanks

    I am not sure about all the errors but lets build up slowly.
    Following are Authentication related errors:
    WKG-30007: Authorization required.
    WKG-30199: Authentication
    WKG-30201: Missing authentication credentials
    WKG-30025, WKG-30164 are both related to connection between the crawler and the target. Errors appear when ssl connection could not be establised or the ssl certificates have expired.
    I am afraid there is not much documentation where the problem and solutions could be dug out.
    HTH
    Aravind
    WKG-30146: Cookie Tracing: 'display cookie obtained from target server'
    WKG-30145: Cookie Tracing: New cookie domain ".XYZ.com" created
    WKG-30147: Cookie Tracing: ' Sending the cookie back to the target server in responce'
    WKG-30027: Not allowed URL: 'This occurs when the link(domain) in page being crawled/indexed is not in the inclusion policy
    WKG-30083: http://xyz.com/xyx : Duplicate document ignored 'This occures when the url in question has already been indexed, HINT: signature hash value of each url is stored in the wk$url table'
    WKG-30008: URL in question NOT FOUND.
    Message was edited by:
    [email protected]

  • ACL-list syntax error in PIX after upgrade, need urgent help!

    Hello everyone
    We have a setup including Cisco ACS + a VPN 3005 Concentrator and a PIX 515E (7.2.4)
    We upgraded the PIX version from 7.0 to 7.2.4 and suddenly our downloadable access-list was getting refused when users authenticated against the ACS.
    When debuging radius in the PIX we found that entering this line in the downloadable access-list give error and stop the users of getting the ACL.
    "deny ip any 192.168.0.0 0.0.255.255"
    PIX refused to process their auth request when encountering this line.
    Fine we said, we changed the ACL syntax to this : deny ip any 192.168.0.0 255.255.0.0
    This made the PIX process the ACL.
    We were happy for awhile until VPN users started to complain.
    It seems that the VPN 3005 cant deal with the syntax we entered in the PIX!
    The VPN 3005 doesnt seem to be able to handle the acl line "deny ip any 192.168.0.0 255.255.0.0" !
    It can only handle "deny ip any 192.168.0.0 0.0.255.255" !
    Which the PIX cant handle..
    I'm a loss at what to do here..
    We got VPN users who cant surf now with these ACL problems.
    What can I do? Anyone else encountered this?
    We upgraded the VPN 3005 to the lastest SW version
    Really need some help here guys!
    Thanks

    I don't think Cisco ever changed anything on the PIX. It uses subnet masks from day one AFAIK and VPN Conc uses wildcard masks like IOS. You can use the acl-netmask-convert command on the ASA to fix this issue. This way you define a willdcard ACL on the ACS/AAA server and then use this command on the ASA to use the same downloadable ACL for both devices (PIX,VPNC).
    http://www.cisco.com/en/US/docs/security/asa/asa81/command/ref/a2.html#wp1622944
    Please Rate if helpful.
    Regards
    Farrukh

  • OLAP Universe - Error: DBD Runtime Error: In Catalogue List: Unknown Error

    Hi there,
    I have a problem while creating a universe on top of a BW Query/Cube.
    While creating a connection to the BW System (using a message server)
    an error occurs: DBD Runtime Exception: Error in Calling Catalog List: Unknown Error
    So, no catalogue list is generated --> I don't see any cubes/queries in the list.
    Can anyone help?
    Thanks & regards, Marielle

    Hi Marielle
    Why are you using message server?
    Application server is much more stable...
    Can you do a normal SAP logon via this message server (same parameters off course)?
    Hope this helps,
    Marianne

Maybe you are looking for