Listing in SAP Retail

Hello,
We have 5 different distribution chains in our Retail system. The materials that I need to extend and list have already been extended to 3 out of 5 distribution chains in the past. We do not want to extend them to remaining 2 out of 5 existing distribution chains. I need to do listing of existing materials to new 6th distribution chain 4012/01.
Out of the thousands of articles we have, 400 articles have the Listing data (mm43 listing tab) created at client level after they were listed to the 3 distribution chains. When I try to list these materials to the new 4012/01, the system tries to list these materials to all remaining distribution chains (since Listing data is at client level).
Is there any way to get rid of the Listing data created at client level in article master? I believe table MAW1 has the data at client level and simply making the assortment grade, listing procedures, validity dates (i.e. listing specific fields) blank fixes the problem. After doing this, I am able to list only to the distribution chain I provide, i.e. 4012/01.
Is it ok to make changes to MAW1 directly? Will it make the article inconsistent in any way for other existing distribution chains or be detrimental in any way? Or any better way to do this?
Thanks
Sagar

Hello Sagar.
Is not ok to make changes in MAW1 or any other table. This can cause serious inconsistency problems and can put the whole retail system in jeopardy.
On the other hand, you can suspend an article at distribution chain level. This will delete not only the listing data, but all data regarding to the specified distribution chain. Check this at the article master menu.
Assortment grade rules and assortment grades are supplied to automatically list, or not list, articles at distribution chains or sites. Check this functionality, this will help a lot in your listing requirements.
Regards,
Juan Carlos

Similar Messages

  • SAP Retail Store - Store Order - Assortment List

    G'day,
    In the SAP Retail Store (SRS) when selecting the "Store Order" "Assortment List" option I've got a request to add columns to the assortment list ( I've done this via Badi IF_EX_WSAO_DISP_EXPAND ).
    The challenge now is to make fields within the added columns available for user input. (Currently the fields is only displayed).
    Example: I've added columns X, Y and Z in the assortment list.
    There are twenty lines in the assortment list and for each line the field in column Y must except input from the user. When the Post Order button is pushed a ME22 transaction must be submitted for each item in the assortment list.
    I've copied the internet service for WSTA to ZWSTA but don't have sufficient HTML knowledge to change the HTML page to achieve the above.
    Can you please help with a solution.
    Thanks, points will be awarded.

    Hi Mohan,
    Thanks for the useful link you shared.
    But I am looking for specific configuration and master data set up required for store order creation scenario where " Warehouse stock is created if stock exists else third party order is created"
    This option is activated in POS interface inbound profile for store order control by selecting document categorydefault as "A - Warehouse order if stock exists, otherwise third-party order"
    Just wanted to understand how this option works by requiring what kind of configuration and master data settings.
    Any further suggestions will be really helpful. 
    Regards,
    Debraj

  • Configurable article in sap retail?

    Hello Experts,
    Can we have configurable articles in sap retail?
    Please tell me your opinions..
    Thanks

    Take an example of computer where we have different model of computer lets say
    xyz 7000 black
    xyz 7000 blue
    xyz 7000 white (three variants of xyz 7000 series laptop)
    customer can build his laptop from the list of components by having picking different options of hardware such as processor, ram, cds hard drive etc.
    Once customer selected the desired components and production order will get generated and the delivery happen to the customer..
    the above scenario we want to do it thru article master..(mm41) not thru standard material master.
    thanks
    MG

  • SAP E-commerce for ERP with SAP Retail back-end

    Hi,
    does anyone implemeted an E-commerce solution with a SAP Retail backend system?
    Our dubt is if durig order entry E-commerce application consider the  product variant grid (like in VA01) or not.
    We found that this function is supported with an AFS back-end, but we would like to know if it is available also with a retail system.
    Thank you very much for your help.

    Hi,
    while we have quite a few implementatinos with E-Commerce and SAP Retail backend, the specific grid functionality you have seen in AFS is not supported with Retail backend. Hence, most customers enhance the standard product offering at that point, catering for e.g. drop down list boxes with style/color/size selection. In case you're only selling "normal" retail products (individual SKUs), the standard product works fine.
    Thanks
       Dominik

  • SAP Retail budget structure

    Good day  Gurus
    Someone can tell me what is the structure of the budget information and where I can look at SAP Retail?
    Greetings and thanks !!
    Aramirez

    Hi,
    This business function uses the following BC sets:
    The business fn names and their description are given below:
    EA-RETAIL-AKH
    Extends the application component hierarchy to include entries for SAP Retail
    EA-RETAIL-IMG
    Extends the implementation guide (IMG) to include entries for SAP Retail
    EA-RETAIL-MENU
    Extends the SAP menu to include entries for SAP Retail
    The listed BC sets are activated automatically if your system is run as SAP Retail.
    Also regarding the changing of scenario, once you create the scenario you can go to customization and change it.
    regards,
    Siddharth.
    Edited by: SD on Jan 12, 2008 7:42 AM

  • Do we have a list of SAP certified system integrators for HANA Enterprise Cloud

    I am in a sales cycle and SAP services estimated price for implementation is to expensive and we are pitching HEC.  Do we have a list of SAP certified system integrators for HANA Enterprise Cloud for ERP (Finance and Merchandising for Retail)?

    Yeah, not sure why they took it out of the cloud interface.
    But if you go to http://www.businesscatalyst.com/partnerportal and login with your cloud ID you will have access to all your cloud sites and many other features.

  • Limiting users to select articles from movement type 309- SAP retail

    Hi experts,
    My client wants to restriction on limiting users selecting articles from movement type 309 in SAP retail. They need an option to predefine article list which can allows users to transfer articles using movement type 309. Is any standard way to accomplish this requirement or whether it s need ABAP development.
    Thank You & Best Regards
    Sameera

    this BAPI just creates movements, you access your Z-tables from the ABAP that calls this BAPI, isn't it?
    But in the exit EXIT_SAPMM07M_001  you can program to read the Z-tables and do the necessary steps to restrict the usage, hence you can use the standard transactions for the movements without needing an extra program that calls a BAPI.

  • Handling of Hazardous Articles in SAP Retail

    Hi SAP Retail Experts
    Would like to know the porcess in SAP to configure the hazardous goods management in Article master whereby we can accomodate the dangerous goods data from and external system into Article Master.

    Dear Pratim
    I don't catch your question. Check e.g. SAP Environment, Health, and Safety Management (SAP EHS Management)
    1.) the term "Dangerous Goods" and Hazard substance" is not the same
    2.) In EHS classic you can get external data for DG use using ALE; same is true for hazardous substance master
    I have no experience with SAP Retail. But according to SAP help: This is a SAP ECC/ERP system in a "special"  mode (you have activated an "industry specific" function). So you need to prepare EHS customizing
    C.B:

  • How can I generate IDOC(WPUUMS) from XML file in POSDM or in SAP Retail

    Hallo Retail expert,
                                I have following scenario,
    I have Retail Store who send me their daily sales report through Wincor Nixdorf Point of sale. There i am using standard POSLOG2 to SEEBURGER(its a middleware which act as Converter) xml format and then i post that data first in POSDM and then with BAPI i transfer or book that data to SAP Retail.
    Above is the one scenario which is working.
    This is the Second scenario.......
    I have some external Retail store, they dont have Wincor Nixdorf POS, so they send me their Sales Report through SEEBURGER(its a middle Hardware which act as Converter) and SEEBURGER Convert that Sales data to XML format. My question is....
    How can i upload or Convert a XML File into IDOC (WPUUMS)in SAP or in POSDM?
    any new suggestion are welcome.
    Thank you all in advance.
    regards,
    Niel

    Hi,
    1. To get the required XML Schema, use transaction code WE60 to go to the IDoc documentation -> enter the IDoc type you want to use (WPUUMS01). Flag control and data record. Then display the XSD by choosing Documentation -> XML Schema from the menue bar. Now you can donwload the XSD for usage in Seeburger.
    2. Create your mapping from the POS format into the IDoc XML format in Seeburger.
    3. Create an XML File Port in ERP or POS DM using transaction code WE21.
    3. To inbound the XML file from Seeburger into POS DM or SAP Retail Seeburger should trigger the function module EDI_DATA_INCOMING. Parameters for this FM are the Pathname to the XML file and the Portname you just created. Based on the port name the FM can derive the port type xml and the data will be handled as XML data.
    Regards Carsten

  • Upload Article Images and Map to Master Data in SAP Retail 6.0

    Hi experts,
    I'm new on Retail Industry, I need to upload about a 15,000 article images and relete them with it'a master data, we are using SAP-Retail 6.0, I read that this is posible  but it doesn't say how to do it. Any of you know how to do this?'
    Regards

    Let me show you the config that we have
    On Edit Screen Data Parameters
    Full Screens
    Server Path                 file://C:\
    Width (Col)                 50
    Height in Rows            20
    File Type                    jpg
    Thumbnail
    Server Path     file://C:\
    File Type       jpg
    Screen Sequence
    Server Path     file://C:\
    File Type       jpg
    Max. Images     3
    Separators      -
    Active Button in subscreen
    X thumbnail
    X Screen Sequence
    X Fullscreen Image
      Subobjects
    X HTML Viewer
    Control data
    X  Check URLs
    X  Setup URLs
    Image Module   A Thumbnail with pushbuttons
    Object ID          E External display
    URL Determin.   C Read from table first, then Generically: Save changes
    Default settings
    Thumbnail      IMAGE01
    Full Screen    IMAGE01
    HTML Page    http://www.elektra.com.mx
    On Screen config we add for Basic Data
    Screen Sequence Number       23
    Logical screen (within a screen sequence)  04
    Consecutive Number of Subscreen     17
    Programm       SAPLMGW_PICTURE
    Screen   0101
    The results is as I told you before just a blank square, we don't have anything pictures nor buttons.
    Hope you can help me
    Regards
    Edgar lopez

  • IDOC message type for "Site" in SAP Retail module?

    Hi All,
    We have the need to transfer master data (through master data change pointers) of Retail Sites within the SAP Retail module (transaction:  WB01, WB02).  Does anyone know if there's an IDOC message/type already associated with this?  Thanks in advance for your help!
    Cheers,
    Matt

    Hi,
    please read SAP notes 892103 and 551035.
    The correct IDOC type should be FIDCC1 / FIDCC2.
    Best regards,
    Andreas

  • Posting a Goods Movement in SAP Retail Store

    In SAP Retail Store, under Inventory Management>Goods Movement>Other Movement, when entering articles and quantities, if you want to use multiple Bus. trans. or Reason for Movmt. values, you have to post them separately.  This requires you to post, exit out and then go back in and post again, etc. 
    Is there a way to post multiple Bus. trans. or Reason for Movmt. values on the same screen?

    Hi,
    Is that stock is tagged with sales order ?
    How you have HU in non HU managed location ??
    If you want to move stock then use t code HU02 and create HU in non HU manged location mentioning destination location as HU managed .
    Regards,
    Vishal

  • Plant/Site deifinition in SAP retail

    Dear SAP experts,
    I am facing a problem on the plant/site deifinitiion on the SAP retail side.The standard 4.6 c settings for plant look different then the ERP 6.0. I would appreciate if I could get some detailed information on th stup for organisational structure in retail side of plant/site etc...to make sure I havent missed anything out and then localise the material master data based on this settinngs and the transaction I should be using for it.
    Thanks

    close

  • Good Movement issue in SAP retail ITS

    Hi All,
        Business is posting goods movement using SAP retail store ITS. The document gets posted in SAP successfully but storage location is not coming correct for a movement type. We have checked the configuration and it is fine. We are not able to replicate the issue in test systems.
    Kindly help us on how we can able to find a cause of this issue.
    Thanks for you help.
    Regards,
    John

    Hi John,
    Retail Store Application is desinged in such a way that for the movement type,the default storage location for the destination plant is automatically taken.
    But you can modify the code as per your requirments by implementing the given BAdI.
    CALL METHOD exit_gr_field->CHECK_INPUT_GR_item
    Modify the field for stroage location W_UMLGO .
    I hope this helps.
    Regards,
    Lorraine

  • Create Characterstics Variants in SAP Retail

    Hi All,
    I have created characterstic profile and assigned it to MC in SAP Retail with different characterstics and values.Im creating records and sending the records to SAP Retail from MDM using XI. For generic generic when im creating a record and trying to post the idoc (msg type ARTMAS), it gives and error message " No Characterstics could be found for Generic Article", and the idoc doesn't get posted. Following are the fields in Retail i have  mapped to the source system:MDM for creating variants.
    Msg Type: ARTMAS04
    Segment: E1BPE1AUSPRT
    Field: MATERIAL,CHAR_NAME,CHAR_VALUE.
    Apart from this i have all the mandatory fields for basic data.
    I'd like to know if im missing on passing some other field value in order to create variants, characterstics for generic type articles.
    Thanks in advance for your help.
    Manish

    Hi Axel,
    Thanks for a quick reply. I have set the relevany indicator 2 only. See Im able to create variants when im creating article in ECC MM41 TC. But i have integrated Retail with MDM and im creating records in MDM and exporting data to Retail ECC. Its during this process im getting the error and not when im cretaing directly in Retail ECC..
    Manish

Maybe you are looking for

  • Integration with MM&SD

    Dear Gurus, I am urging everyone for provide me good material for integration with FI&MM, FI&SD Thanks in advance to everybody Murali

  • Placing ini file in specific location when building the application

    Hello,    I have a small problem.  I have an ini file that I use to store certain parameters.  Lets call this file app.ini.  When I build the Application.exe, it puts that file into the data directory.  I was hoping that it would be one level higher

  • IPod shuffle - synch between Windows PC and Mac G3

    Hi there! I started my iPod account on a pc and I have a whole library on there.I would sign in with my hotmail account. I have recently changed to a Mac G3 and I can't access my library on it. I have now created an Apple login. My question is how ca

  • Possible bug with APEX_ITEM.DATE_POPUP

    Hello, APEX 3.1 (and maybe even some previous versions). It seems like APEX_ITEM.DATE_POPUP creates all the cells in the corresponding column with the same ID. The result is that the dates returned by every date picker, in all the rows of the column,

  • Help with physical download of my library from cloud to new PC

    Hello! I have my entire itunes library saved in the itunes cloud, over 12,000 songs.  I would like to physically download all of them to a new PC and deactivate my old PC.  Is there a way to do this as a full group or is the only way to select the so