Listing number of times an archivelog is backed up.

Is there anyway to use RMAN to determine the number of times an archive log has been backed up?

Thank you. Also know that there is a column in v$archived_logs that gives me this information.

Similar Messages

Hi my iphone was fully charged and turned its self off, i have tried to turn it back on and reset it, but no luck so i have plugged it in to my pc and it displays the apple logo and then goes back off i have tried this a number of times with no success

hi my iphone was fully charged and turned its self off, i have tried to turn it back on and reset it, but no luck so i have plugged it in to my pc and it displays the apple logo and then goes back off i have tried this a number of times with no success anyone got any idears?

Try here:
iOS: Not responding or does not turn on

HT201774 How do I delete excess email messages from my iPhone. There are 300 messages listed, and every time I delete some, more are added from old messages. How do I limit the number of messages that can appear on my phone? How can I delete messages i

How do I delete excess email messages from my iPhone. There are 300 messages listed, and every time I delete some, more are added from old messages. How do I limit the number of messages that can appear on my phone? How can I delete messages in bulk,

You can't.
All photos transferred from your computer are stored in the Photo Library. The photos in the album or albums below are not duplicates - they include a pointer to the original photos stored in the Photo Library. This way you can view the photos in a particular album only by selecting the album, or you can view all photos available in all albums by selecting Photo Library.
Just as with an iTunes playlist. A song cannot be in an iTunes playlist unless the song is in the main iTunes library. Placing a song in a playlist does not duplicate the song. Remove the main iTunes library or the songs from the main iTunes library that are in a playlist and the songs will no longer be in the playlist either. This way you can listen to the songs in the playlist only by selecting the playlist, or all songs in your entire iTunes library by selecting Music under Library in the iTunes source list.
The same with iPhoto on a Mac. A photo cannot be in an in iPhoto Event or Album unless the photo is in the main iPhoto library. Placing a photo in an Event or Album does not duplicate the photo. This way you can view the photos in an iPhoto Event or Album only by selecting the Event or Album, or all photos in all Events or Albums.

HT1277 I installed mavericks today and the mail will not open and just keeps on not responding how do I get it back I have force quit it a number of times now

I installed mavericks today and the mail will not open and just keeps on not responding how do I get it back I have force quit it a number of times now

Open the system menu via Alt+Space or click the Firefox icon on the title bar and see if you can resize that window.
If that works then close Firefox to save that setting.
See also http://kb.mozillazine.org/Resizing_oversize_window
Window sizes and positions are stored in [http://kb.mozillazine.org/localstore.rdf localstore.rdf] in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder].
See http://kb.mozillazine.org/Corrupt_localstore.rdf

Change to list of snooze times in 10.9.5?

Holding down the Snooze button on a notification has, since the original 10.9, allowed you to select a time until the notification will reappear. (Yes, the list is different depending on whether the event has already occurred.) I just tried to snooze an event (which has already occurred) for one day, something I've done many times in the past. However, the list of snooze times offered to me now has: 1, 5, 15 and 30 minutes, 1 and 2 hours, 1 week, and "until end time". I'm sure it also used to include 1 and 2 days, and some screen shots I've found around the Web demonstrating the feature confirm this. The "until end time" may actually be a clue: The event in question has already ended.
While I've applied other updates recently, they all seem unlikely to touch the reminder system - with the exception of 10.9.5, which I updated to about a week or so back,
Are others seeing this, or is it just me?
Is the list of times in a preferences file or such somewhere where it could be adjusted?
-- Jerry

This will depend on the slideshow theme you are using. The older themes "Ken Burns" and "Classic" allow to customize the transitions in the "Settings", but the newer themes have predefined transitions optimized for the effects in the themes. You cannot customize the transitions or the number of photos on the slides.
The Ken Burns settings:

Time machine doesn't back everything up anymore B-)

I have two computers, a Macbook Pro and a Mac Mini, both running 10.5.8. Both have external firewire drives (a LaCie on the Macbook Pro and an Iomega on the Mac Mini) and in both cases Time Machine has stopped backing everything up - it does all the right things but the number of files backed up is small.
I'll ask separately at this point, as the fixes may be different for each one and it will get confusing (to me and everyone else!).
The MacBook Pro backs up to a LaCie 250Gb external firewire drive. It used to work happily (since 2008) until last month (approx), now when I connect it it backs up normally but quite often nothing in the /Users/ directories gets backed up. Maybe about the time I upgraded from Aperture 2 to Aperture 3.
Here's an example from this morning from the system log:
Mar 20 10:00:53 dhcp102 /System/Library/CoreServices/backupd[19205]: Backup requested by user
Mar 20 10:00:53 dhcp102 /System/Library/CoreServices/backupd[19205]: Starting standard backup
Mar 20 10:00:54 dhcp102 /System/Library/CoreServices/backupd[19205]: Backing up to: /Volumes/LaCie/Backups.backupdb
Mar 20 10:01:11 dhcp102 /System/Library/CoreServices/backupd[19205]: No pre-backup thinning needed: 102.9 MB requested (including padding), 8.36 GB available
Mar 20 10:01:43 dhcp102 /System/Library/CoreServices/backupd[19205]: Copied 465 files (10.6 MB) from volume Macintosh HD.
Mar 20 10:01:43 dhcp102 /System/Library/CoreServices/backupd[19205]: No pre-backup thinning needed: 100.0 MB requested (including padding), 8.35 GB available
Mar 20 10:01:44 dhcp102 /System/Library/CoreServices/backupd[19205]: Copied 62 files (93 bytes) from volume Macintosh HD.
Mar 20 10:01:46 dhcp102 /System/Library/CoreServices/backupd[19205]: Starting post-backup thinning
Mar 20 10:01:48 dhcp102 /System/Library/CoreServices/backupd[19205]: Deleted backup /Volumes/LaCie/Backups.backupdb/falstaff/2010-03-13-113744: 8.35 GB now available
Mar 20 10:01:50 dhcp102 /System/Library/CoreServices/backupd[19205]: Deleted backup /Volumes/LaCie/Backups.backupdb/falstaff/2010-03-13-113622: 8.35 GB now available
Mar 20 10:01:51 dhcp102 /System/Library/CoreServices/backupd[19205]: Deleted backup /Volumes/LaCie/Backups.backupdb/falstaff/2010-03-13-113500: 8.35 GB now available
Mar 20 10:01:52 dhcp102 /System/Library/CoreServices/backupd[19205]: Deleted backup /Volumes/LaCie/Backups.backupdb/falstaff/2010-03-13-101432: 8.35 GB now available
Mar 20 10:01:52 dhcp102 /System/Library/CoreServices/backupd[19205]: Post-back up thinning complete: 4 expired backups removed
Mar 20 10:01:52 dhcp102 /System/Library/CoreServices/backupd[19205]: Backup completed successfully.
Mar 20 10:02:11 dhcp102 /System/Library/CoreServices/backupd[19205]: Stopping backupd to allow ejection of backup destination disk!
(the previous backup was 18th March at 20:30, since then I used the machine all day at work, reading mail, rss feeds etc).
But if I look at the backup using TimeTracker nothing got backed up in the /Users/ directories, especially in the "Pictures" directory where my Aperture 3 library and vaults live.
Interestingly, just now, I rebooted after installing the latest version of "little snitch" and when I re-attached the LaCie disk it backed up a lot more, but still not the Aperture Library and vaults.
Mar 20 12:07:18 dhcp102 /System/Library/CoreServices/backupd[437]: Backup requested due to disk attach
Mar 20 12:07:18 dhcp102 /System/Library/CoreServices/backupd[437]: Starting standard backup
Mar 20 12:07:20 dhcp102 /System/Library/CoreServices/backupd[437]: Backing up to: /Volumes/LaCie/Backups.backupdb
Mar 20 12:07:43 dhcp102 /System/Library/CoreServices/backupd[437]: No pre-backup thinning needed: 151.0 MB requested (including padding), 8.35 GB available
Mar 20 12:11:29 dhcp102 /System/Library/CoreServices/backupd[437]: Copied 3452 files (660.6 MB) from volume Macintosh HD.
Mar 20 12:11:37 dhcp102 /System/Library/CoreServices/backupd[437]: No pre-backup thinning needed: 100.0 MB requested (including padding), 7.68 GB available
Mar 20 12:11:43 dhcp102 /System/Library/CoreServices/backupd[437]: Copied 588 files (14 KB) from volume Macintosh HD.
Mar 20 12:11:46 dhcp102 /System/Library/CoreServices/backupd[437]: Starting post-backup thinning
Mar 20 12:11:46 dhcp102 /System/Library/CoreServices/backupd[437]: No post-back up thinning needed: no expired backups exist
Mar 20 12:11:46 dhcp102 /System/Library/CoreServices/backupd[437]: Backup completed successfully.
It estimated 151Mb but actually backed up 660Mb!
If I look at TM restore, my Aperture Library hasn't been backed up since 1st March, even though I added some photos Thursday night.
I have just copied two jpeg files into the Pictures folder, that seems to have triggered it into
backing up 4.6Gb worth of Aperture Library, but not the Aperture Vault.
Mar 20 12:26:09 dhcp102 /System/Library/CoreServices/backupd[494]: Backup requested by user
Mar 20 12:26:09 dhcp102 /System/Library/CoreServices/backupd[494]: Starting standard backup
Mar 20 12:26:09 dhcp102 /System/Library/CoreServices/backupd[494]: Backing up to: /Volumes/LaCie/Backups.backupdb
Mar 20 12:26:16 dhcp102 /System/Library/CoreServices/backupd[494]: No pre-backup thinning needed: 100.0 MB requested (including padding), 7.68 GB available
Mar 20 12:31:08 dhcp102 /System/Library/CoreServices/backupd[494]: Copied 628 files (4.6 GB) from volume Macintosh HD.
Mar 20 12:31:09 dhcp102 /System/Library/CoreServices/backupd[494]: No pre-backup thinning needed: 100.0 MB requested (including padding), 3.04 GB available
Mar 20 12:31:09 dhcp102 /System/Library/CoreServices/backupd[494]: Copied 498 files (54 KB) from volume Macintosh HD.
Mar 20 12:31:10 dhcp102 /System/Library/CoreServices/backupd[494]: Starting post-backup thinning
Mar 20 12:31:10 dhcp102 /System/Library/CoreServices/backupd[494]: No post-back up thinning needed: no expired backups exist
Mar 20 12:31:10 dhcp102 /System/Library/CoreServices/backupd[494]: Backup completed successfully.
I have run disk verify and permissions verify on the startup disk, and disk verify on the LaCie disk, I have also tried a time machine reset (several times) and a spotlight re-index (several times). I have nothing excluded in TM or Spotlight.
Confused,
Dave

Hi. Sorry for the delay, work always gets in the way!
See #D5....
Already checked the exclude list, have also tried a full reset.
That said, I mentioned above that TM seemed to have started working again, it has continued to work since. I had done a verify on the disk(s) and not restarted afterwards, I wonder if the SL bug also applies to Leopard - it did seem to start working after the reboot.
I'll keep an eye on it and see if it happens again.

My Time Capsule won't back up my SD card

My SD card (128g) holds all of my music and pictures so that the content doesn't monopolize my MacBook Air. I purchased the time capsule specifically to back the SD card up but, no matter what I do, I can't get it to include it. It's not listed on the exclusion list and is formatted, from what I understand, properly as "Mac OS Extended (Journaled). I am running OS X Yosemite 10.10.2 on an early 2014 13".
Thanks in advance!

Well it seems the number of posts about Maverick having issues with TC and old backups is growing.
What model TC do you have?? Is it coming up in finder? Can you access the setting in airport utility?
Try plugging it directly to the computer by ethernet in complete isolation from the network. Factory reset the TC.. this will not affect the backup at all.
The Factory Reset Gen1-4.
Unplug your TC. Hold in reset. and power the TC back on.. without releasing reset for about 10sec. When the status light flashes rapidly; release it.
Be Gentle! Feel the switch click on. It has a positive feel.. add no more pressure after that.
TC will reboot after a couple of minutes with default factory settings and will wipe out previous configurations.
No files are deleted on the hard disk.. No reset of the TC deletes files.. to do that you use erase from the airport utility.
Factory reset Gen 5
Hold in reset for about 5sec until the status light flashes quickly.
If your AirPort Time Capsule still doesn’t respond, do a similar reset to the Gen1-4.
Unplug your AirPort Time Capsule .. hold in reset and power the TC back on.. without releasing the reset.. wait until status led flashes rapidly.
Leave wireless off in the computer and see if you can use migration assistant to copy your files back to the computer.
I would archive off the old backup and start afresh.. do not try and continue using the old backup once you restore your files. But make sure you archive off if you want to keep the old backup.
Archive is available in newest 6.3.1 and 6.3.2 airport utility on the disk page.

My Time Capsule has stopped backing up. I have an Apple Time Capsule which backs up by wireless. For the last 3 days it has not backed up. I get this message: "The backup was not performed because an error occurred while copying files to the backup disk.

My Time Capsule has stopped backing up.
I have an Apple Time Capsule which backs up by wireless. For the last 3 days it has not backed up. I get this message:
"The backup was not performed because an error occurred while copying files to the backup disk."
I have gone into Mac Help and followed this down to stage 4:
under shared it lists my time capsule and my husband's iMac - both use the time machine but we have switched his off temporarily. Clicking on my Time capsule I get "Connected" and "Sharepoint" - I didn't have to enter connect or password
I don't understand stage 5: how and where do I select the disk or volume that contains Time Machine backups ? How do I know which it is? My disk utility lists 160.04 TOSHIBA MK... with sub-heading Macintosh HD. It also lists (with a "CD" icon) HL-DT-ST DVDRW GS22N
Under stage 6, how and where do I Locate your backup ? I try dragging my Time capsule from Finder to the Disk Utility side panel but it won't go. What is my computer's name?
Please someone help! I'm completely stumped.
Thanks,
Maggie
Mac Help says:
If you back up to a Time Capsule or network disk:
Open the Time Machine pane of System Preferences, and slide the switch to Off.
Open Time Machine preferences
Open Disk Utility, which is in the Utilities folder in the Applications folder.
Open Disk Utility
Make sure the Time Capsule or network disk is turned on and available.
Open a Finder window, select your Time Capsule or network disk in the Shared section of the sidebar, and click Connect. If necessary, enter your user name and password.
On the Time Capsule or network disk, select the disk or volume that contains Time Machine backups. Depending on how your Time Capsule is set up, there may be one or more disks or volumes.
Locate your backup, and drag it to the Disk Utility sidebar.You can identify your backup by looking for your computer’s name in the backup’s filename.

Hello,
Thanks to the great Pondini...
http://pondini.org/TM/C3.html

Time Machine won't back up. Starts of REALLY SLOW, and the errors out.

I've been having a hard time getting time machine to back up. To start off I'll give you my specs and what I have done.
iMac
OS 10.6.6
2.4 GHz Intel Core 2 Duo
4 GB 667 DDR@ SDRAM
320 GB HD
All software updates are current. I am trying to back up to an external Western Digital 1 GB drive connected by USB2. I have formatted the external drive, and set a single partition on that drive from the Disc Utility. I have run disk repair on both the external and local hard drive. I have run disk repair permission on the local drive. I have restarted, after every time. I have done everything listed above multiple times, and have done them all in kinda different orders each time.
My thought is that the issue may not be with the hard drives, but maybe a file its trying to back up. When it starts out for the first time, it tells me that it needs to back up over 100 GB of data. It gets about halfway done, and then errors out. When I try to start it again, it tells me that it needs to backup around 50 GB of data. And this time, its REALLY slow. Like bytes slow, not Mega bytes, or even kilobytes. Bytes. 36 bites backed up, 120 bytes backed up. 2 Kilobytes backed up. SLOW SLOW SLOW.
Then it picks up, and usually gets up to 120 MB, and then gives me this error message "The Backup was not performed because an error occurred while copying files to the backup disk. - The problem may be temporary. Try again later to back up. If the problem persists, use Disk Utility to repair your backup disk."
Its a pretty generic message, and gives me no help in trying to figure out what the problem is. I've been trying again for almost 3 days now, and nothing is working. Is there an error log file that I can go find that would help me a little more?

woody24 wrote:
"The Backup was not performed because an error occurred while copying files to the backup disk. - The problem may be temporary. Try again later to back up. If the problem persists, use Disk Utility to repair your backup disk."
See #C3 in [Time Machine - Troubleshooting|http://web.me.com/pondini/Time_Machine/Troubleshooting.html] (or use the link in *User Tips* at the top of this forum).
Its a pretty generic message, and gives me no help in trying to figure out what the problem is. I've been trying again for almost 3 days now, and nothing is working. Is there an error log file that I can go find that would help me a little more?
Tell Apple about the inadequacy of that message: http://www.apple.com/feedback/timemachine.html

Having downloaded Mavericks to my IMac I now find Time Machine couldn't back up to the Time Machine HDD. I am using a WD 1TB independent Hard drive

Having downloaded Mavericks to my IMac two weeks ago, I now find Time Machine couldn't back up to the Time Machine HDD. I am using a WD 1TB External Hard drive. I understand that a number of people have lost data since installing Mavericks on their Western Digital external drives. Has anyone any futher info. Or is there a better way of backing up my computer. Thanks. Lee

Check the More Like This section at the right particularly i upgraded my imac hard drive to a 2tb drive. how do i use time machine to get my computer back to normal?

Time Machine won't back up external drive to Time Capsule

I recently got a Time Capsule, and successfully set it up to back up my iMac's primary drive, but for some reason Time Machine won't back up my external drive to the Time Capsule.
I removed the external drive from the exclusion list in System Preferences > Time Machine > Options, and from what I've read this should be sufficient to make Time Machine back up the drive.
The external drive is connected to my iMac via Thunderbolt > Thunderbolt-to-Firewire adaptor > Firewire 800 input, and the Time Capsule is connected via Ethernet to my LAN.
Since I'm using Ethernet, I've disabled Wi-Fi on the Time Capusule by going to AirPort Utility > My Time Capsule > Edit > Wireless > Network Mode > Off.
The reason I believe the external drive is not being backed up is because when I click the Time Machine icon in the upper-right status bar and choose "Enter Time Machine", none of the folders on external drive show any older versions.
Furthermore, when I click Finder > Time Machine Backups > Backups.backupdb, I can see only one sub-folder which has the name of my iMac's primary drive. I can't see any equivalent folder for my external drive.
Any idea what I'm doing wrong?

I don't see anything you have done wrong.. perhaps it does backup in a different way.
Load the widget.. A1 here... http://pondini.org/TM/Troubleshooting.html
That will allow you to track the log of TM to see what it is doing.
I would also try rebooting the computer.. exclude the drive again.. reboot.. and remove the exclusion.
You should be able to check the actual settings of TM in plist file.
And you can do a full reset of TM as well.. See A4. Check what is in the file. Pondini lists the location for you.
Nothing surprises me with Mountain Lion ...!!

Time Machine doesn't back everything up

Having a quirky issue with Time Machine - it's only backing up the 'Users' folder from the OS hard drive, not the 'Applications', 'Library' or 'System' folders. Therefore, if I ever needed it to reinstall it wouldn't have enough of the data.
Any ideas how to tell Time Machine to back up all folders on the OS drive? Nothing I can see in Time Machine settings/preferences with such an option...
For info, the OS is on a 250GB inernal SSD and Time Machine is backing up to a 2TB external drive.
Thanks!

Just as an update, I tried deleting the com.apple.TimeMachine.plist preferences file and effectively 'resetting' Time Machine but it made no difference. I ran the diagnostic and reported it as a Bug to Apple. For your info, details of report are below.
Thanks
Andy
20-Aug-2013 10:42 AM Andy Worby:
Summary:
Time Machine is failing to back up all top-level folders present on the main OS hard disc, even though they do not appear in the 'Exclusions' list within Time Machine preferences. As a result, 'System', 'Library' and 'Applications' top-level folders are not backed up. The only folder being backed up is 'Users'.
Upon investigation, the com.apple.TimeMachine.plist preferences file contains exclusions for above mentioned top-level folders (see screenshot 1), although they have 'not' been purposefully added to the 'Exclusions' list via the Time Machine preferences window.
Deleting the com.apple.TimeMachine.plist preferences file and then setting up Time Machine once again via the preferences window does not change the result - the three affected folders still fail to back up.
Steps to Reproduce:
1. Delete com.apple.TimeMachine.plist preferences file to perform a full reset of Time Machine.
2. Enter Time Machine preferences window.
3. Select backup hard disc ( in this case, I am using an external 2TB hard disc via Firewire 800 connection).
4. Click options
5. Ensure that only the backup hard disc is selected in 'Exclusions' list.
6. Click Save
7. Commence a Time Machine backup.
8. Allow backup process to complete.
9. Go directly into the backup hard disc.
10. View top-level folders that have been backed up from the OS hard disc.
Expected Results:
All top-level folders from the OS hard disc should have been backed up.
Actual Results:
Only the 'Users' top-level folder from the OS hard disc has been backed up.
Regression:
Problem is continuous, and has occurred for some time, although I do not know from which exact date.
Notes:
I have included the following attachments:
1. Study iMac.tmdiagnostic.zip
2.Screen shot 1 - this is a screenshot of the Time Machine preferences file
3. Screen shot 2 - this is a screenshot of the top level folders within my OS hard disc

Time Machine Didn't Back Up

I have two hard drives that are both 2 Terrabytes. One is the main and the other is the Time Machine backup.
I just accidentally overwrote a Flash FLA file, so I selected it and ran Time Machine. There is no backup of this file even though it's on the main hard drive and Time Machine has been backing up every hour for months.
In fact, if I select the folder and check out Time Machine, it doesn't have a backup of the entire folder all the way back to the first week of April.
Yes, Time Machine is backing up, I didn't turn it off.
Does anyone have an idea why Time Machine would arbitrarily decide to not back up this folder? What happens if it runs out of space on the backup hard drive?
Thank you!

OK, I just checked the preferences and the Main Hard drive was put on the 'don't back up' list somehow. Weird. I must have accidentally did that. I'm backing up NOW!!

When i try to do a software update, it finishes and then says that the update cannot be saved because it has probably been corrupted during the download. This has happened a number of times and i do not know why, any help?

When i try to do a software update, it finishes and then says that the update cannot be saved because it has probably been corrupted during the download. This has happened a number of times and i do not know why, any help?

asifmanzoor wrote:
i have 10.7.2, this download is 10.7.5
Are you Downloading it from here > http://support.apple.com/kb/dl1582
asifmanzoor wrote:
yes, i am using wifi
1) Turn your Wi-Fi router OFF... wait 30 seconds... Turn it back ON.
OR...
Do not use Wi-Fi and connect Directly to your Internet via ethernet cable.

Reminders list frequently disappear,how can i get back my list whenever it suddently disapear?:(

reminders list frequently disappear,how can i get back my list whenever it suddently disapear?:(
I rely deeply on my reminders list, but a few times, the list just disappear and I have to rewrite my lists, but it is getting more and more annoying because my list is getting longer and longer and i just can't write it over and over again. Does it have a connection to my icloud for reminders is being disabled?
Please help me.
Thank You

Phone to Mac will be able to pull up your previous backup info from your computer so you can have a copy of Contacts, SMS, etc.
http://www.macroplant.com/phonetomac/

Listing number of times an archivelog is backed up.

Similar Messages

Maybe you are looking for